I am trying to send a file to a ftp server but everytime the task executes it fails but doesn't tell why. The Connection succeeds when I test it. Any ideas what would cause this please let me know. The FTP server I'm trying to connect to is running on z/OS and has MvS operating system.
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
I need to connect to a FTP/SSL server to grab a file in my SSIS package. But I cannot find any option in FTP task to specify the connection type. Can some one help me out?
I created a DTS FTP task to connect to an FTP site. The problem I'm having is the folder I want to access you cannot see under the Files Tab. So if I put the ftp site/subdirectory in the FTP Site box, I get the error "Unable to connect to internet! Please check the source site information, your username and password"
If I go to the FTP site/subdirectory in IE all the files show up fine. I believe this is limitation of DTS, but I would like to hear from you all first.
To see what error I'm talking about: Create a DTS FTP task Use: ftp.microsoft.com/bussys/ with no username or password Click the Files Tab
Normally you can just put the server name in, and see all the folders/files, but the way my FTP site is set up I cannot see the folder I want, I can only access it.
A common issue that I run across with clients is they want only want to process a file if it's finished transmitting to the server. This SQL Server 2005 task reads the properties of a file and writes the values to a series of variables. For example, you can use this task to determine if the file is in use (still be uploaded or written to) and then conditionally run the Data Flow task to load the file if it's not being used. You can also use it to determine when the file was created in order to determine if it must be archived.
Hi, there; I am doing my first SSIS project that moves data from dbf file to SQL2005. What I did here is that I created a dataflow task (move data)with ASP.NET successfully (Very happy!). Now I want to create an ExecuteSQLTask that runs before data flow runs. This ExecuteSQLTask is used used to create a table if there is no destination table in the SQL2005. This can be done easily in SSIS design mode, just need to connect those two box with a green line: ) I had a look example from MS website, but I didn't find a code example to connect this two task. Does anybody know how to resolve this or have any link with sample code?
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Hi, I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
" Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251 "
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S. I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
I am having a problem with connecting to SQL Server 2005 database from Office Business Scorecard Manager 2005 (the connection string i am using is: provider=SQLOLEDB;Data source=server_name; Initial catalog=database_name). But the connection failed. Would please any experts here shed me any light on what is the problem and how to fix it then? As there is no any forum for Office Business Scrorecard manager 2005. Therefore I post my thread here as it is related to the connection to SQL Server 2005 database engine, thought here is the best place for this question.
Thank you very in advance for your kind advices and help. And I am looking forward to hearing from you soon.
I've used Sql Server 2000 and Visual Studio 2003 for a few years. I've started a new position and they have access to Sql Server 2005 Standard and Visual Basic 2005 Express which I'd like to use for a new project. So I installed Sql Server 2005 and then VB 2005 Express on my workstation. I didn't choose the Sql Server option for VB Express because I already had Sql Server 2005 Standard installed with a simple database created. I created a simple vb project that justs connects to the database but I get the following error.
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0000, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. I looked at permissions in the database and it looks ok. I'm the db owner and I'm using Windows Auth. My connection string is
I thought I'd look at the starter kit to get some ideas about what the problem is, but when I started the movie starter kit project, it was upset that I didn't have Sql Server 2005 EXPRESS installed. Yea, but I do have Sql Server 2005 Standard installed. Any help will be greatly appreciated. Thanks.
I've installed, with default settings, VS 2005 and Server 2005 Express and cannot get VS2005 to connect. This is the error:
Unable to open the physical file "..path...mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process."
I shutdown Server 2005 but that didn't change anything. Any ideas?
I have installed MS Visual Web Developer 2005 Express Edition on my Notebook (WinXP Pro SP2). And it's working fine. Then I tried installed SQL Server 2005 Express Edition SP1. There is no error during installation and it seems to be working as I can see the SQL Server (MSSQLServer) service is running. As SQL server configulation manager., the protocal shared memory , named Pipes and TCP/IP are enabled.
But when I want to add connection using VWD 2005 by pointing to datasource (MS SQL Server database file and selecing file from .mdf file from SQL sample database file. Then test connection, I got a error that "An error has occurred while establishing a conneciton to the server. when connecting to SQL server 2005, this failure may be casued the the fact that under the default settings SQL server does not allow remote connections. (provider: SQL Interfaces, error: 26- Error locating server/instance specified)
Can you please advise what the missing part of my configulation ?
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
Hi, I've looked through the search facility and not seen anything discussed for this before, and wonder if someone here has the answer?
I've just setup a new server (Win Server 2003 SE SP1), installed SQL Server 2005 Developer Edition and can connect to it fine locally using Management Studio, but when I try to connecto to it via MS remotely, I get nothing.
I've enabled remote connections, the firewall is set to allow TCP port 1433 through (though even with the firewall off, I get nothing). Just TCP/IP is enabled as a network protocol, but I've tried all others (service doesn't start if trying to use VIA), with all but VIA enabled for Native Client Protocols.
I've fiddled with this for a couple of days now and not got anywhere. If I enable IIS on the server, I can telnet to that fine, so the server is listening on the network fine, but telnet'ing to port 1433 gets no reply.
Am I missing something obvious here? Please help, it's driving me mad!
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (Microsoft SQL Server, Error: -2146893019)
Hello,Could you help me please to solve the prblem with connecting to SQL Serverfrom .NET development environment?I have the following error:"An error has occured while establishing a connection to the server. Whenconnecting to SQL Server 2005, this failure may be caused by the fact thatunder the default setting SQL Server does not allow remote connections.(provider: Named Pipes Provider, error: 40 - Could nott open a connection toSQL Server)Please help. I changed option for remote connections but it doesn't help./RAM/
After several attempts to install SQL2005 I finally got Microsoft SQL Server Management Studio installed.But now I get the error below:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)The sa account username/password are correct and don't work, windows authentication does not work, I have stopped/started all the services, I have all Protocols enabled correctly, I have my Firewall turned off. Is there anything else I can try? Anything!
Hi there, I install microsoft server 2005 and I use the microsoft server management studio express tool to get connection and database tables set up. To connect to server: Connection server: localhostSQLEXPRESS Authentication: windows authentication Then I click on connect button
I create the tables in YCH1-1SQLEXPRESSDatabasesSystem DatabasesmasterTables where YCH1-1 is my machine name The table I have created is called staff I put in the code below in the web.config file but it does not work when I try to insert data into staff table <appSettings><add key="ConnectionString" value="Data Source=(local);Initial Catalog=Master; 
 Integrated Security=true;"/> </appSettings> Error in statement: connection.open() An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hi All,I hopen this isnt a stupid question but can I connect asp 1 to sqlserver 2005? i want to update the database used on a ASP.net 1 project, I seem to be able to get it to connect but cant get it to see the tables?Thanks for any helpLee
I have 2 severs. Server A uses sql 2005 and Server B uses sql 2000. I want to create sql sever registration on Server B connecting to Server A. But it saied 'To connect to this server you must use SQL Server Management Studio or SQL Server Management Objects (SMO)' Any idea to solve it? thanks!
I have installed SQL Server 2005 Beta 2 on my PC. When I try to make aconnection to it from the DTS environment, I get following error:=============================================Could not get server list. (DTS Import/Export Wizard)=============================================[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or accessdenied. (Microsoft OLE DB Provider for SQL Server)----------------------------------------Making a connection from within SQL Server Management Studio works fine.If I try to connect from within a .NET program using SQLConnection, itfails on the conn.Open() call. But SQL Server Management Studio worksfine.Has anyone run into this? Could someone please help?Rob
i have allready install mssql2005 Dev version on WinXP in one machine
then try to connect . in browser http://localgost/reports
as a result error Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
if try connect from MS managment studio
also have a error
why it can happent ?
when i try to configure :
go to reportin services config manager I see that "web service identity is not configured ",
go to web service identity
ASPNET Service account : = ASPNET
click APPLY
as a result such error :
ReportServicesConfigUI.WMIProvider.WMIProviderException: The account name is not valid. Specify an account in the form domainalias.
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
Hi, I've installed the evaluation version of sql server 2005 and sp2 on my local machine running vista 64 .. .I can see the mssqlserver service running but I don't see any mssqlserver available in management studio.. maybe i have to do something in the configuration manager? i wish these tools were more intuitive, feel like I'm guessing and testing
all, I have the standard edition of SQL Server 2005 installed on a WIN XP Pro machine. I setup file and print sharing with my laptop. What do I need to be able to connect to SQL Server on my WIN XP Pro machine from my laptop. I hope to do most of my developing on my laptop. Do I need the developers edition of SQL server 2005 installed on my laptop?
I can connect to this instance using both oSQL or sqlcmd and can select from the tables within BlueTarp, but my web app won't connect, and I can't figure out why!!
When I installed SQL Express, I used a named instance, called "SQLExpress".
I'm using mixed mode authentication.
One strange thing is that I can connect to either SQLExpress or MSSQLSERVER instances, but they appear to be the same instance -- I can use bluetarp in both.
when I use SQLExpress for instance name in web.config I get "SQL Server does not exist or access denied"
when I use MSSQLServer for instance name in web.config I get "Invalid connection"
And in fiddling with the web.config, I somehow did something to get a machine.config error, something like "machine.config couldn't be loaded because of an unloaded appdomain".
It's driving me nuts because I've spent a good 40 hours on this stupid problem, throwing the whole margin down the toilet.
Hi all. I have a 64 bit Windows 2003 cluster with 4 named instances of SQL Server 2005.
Im unable to connect via ODBC or from applications from Windows Vista to the named instances. There are no problem connecting to default intances.
The ODBC give me a SQL State 08001 error. In the bottom of the error it talks about not allowing remote connections, but the instances allows both TCPIP and named pipes.
The SQL 2005 cluster are running SP2 and Vista have Native Client upgraded to SP2.