Can't Get CAST Function To Work In ASP.NET
Mar 16, 2006
I'm trying to do something like this SQL statement. I have a table with a field of date/times.
i.e - 2/27/06 9:55:95 PM Basically there are multiple entries in the table per day.
I want to count the records for particular (hence the CAST) and output the count.
Here it was I had just to see if SQL would work in ASP.NET :
SELECT COUNT(*) AS Expr1
FROM dbo.tblActiveDrums
WHERE [CAST](FLOOR([CAST](NCTimeStamp AS [float])) AS datetime) = '0' OR
NCTimeStamp - [CAST](FLOOR([CAST](NCTimeStamp AS [float])) AS datetime) = '0'
It didn't like the AS references?
Any help would be appreciated.
View 2 Replies
ADVERTISEMENT
Mar 8, 2006
Hi,
I have a table with the following structure:
Table: Meeting
ID integer not null
Desc text null
Here Col 'Desc' is a text type stores description. I have used the following UPDATE query:
UPDATE Meeting SET Desc='New Updated text......' + ' ' + CAST(Desc as varchar) WHERE ID=100
Issues:
1. Since i did'nt specify lenth for varchar it takes only 30 chars from existing value and added to the edited text.
2. If i give like this CAST(Desc as varchar(8000)); it might take only first 8000 chars; remaining would be truncated correct? I assume that will happen.
3. If i don't use CAST i get error msg: "Invalid operator for type.."
Is there any work around in this situation? or better way to do it.
Looking for your help.
Thanks
BoB
View 2 Replies
View Related
Mar 4, 2008
I'm trying to cast the variable Alumni and keep getting a "The type of the value being assigned to variable "User::
Alumni" differs from the current variable type" error. The resultset from Records is a varchar(max) and the variable Alumni is a string. I found a blog that says to cast the result column to a max size limit. I want to do it this way so I can put the result in the message of a send mail task.
Here is the blog.
http://blogs.conchango.com/stevewright/archive/2006/01/20/2686.aspx
SELECT Records as Alumni
this doesn't work or I dont' have the syntax right?
SELECT Records as CAST(Alumni as varchar(max))
thanks,
View 11 Replies
View Related
Dec 2, 2005
Hi
Can someone help me in the following:
An example is shown below, I had assign a date (format: dd/mm/yyyy) to @vdate. Follow by a cast to vchar. The issue is that the date format is changed after the cast. I would like the date format to remain as dd/mm/yyyy after doing the cast. Hope someone can give some advices. Thanks alot.
Example:
declare @vdate as datetime
set @vdate = convert(datetime,'01/10/2005',103)
select @vdate --> '10/01/2005' (date format required)
cast(varchar(20),@vdate) --> 'Oct 1, 2005' (date format changed)
View 1 Replies
View Related
Jul 25, 2013
When I test the CAST function on AdventureWorks2012, the CAST function will round down or up, i.e. 2024.994 to 2025 or 5.1865 to 5.
However, when I try the same the CAST function as:
SELECTCAST(2024.994 AS INT) the result I get is now 2024 (and not 2025).
Why is CAST rounding up when I use it on a table in the AdventureWorks2012 database, but when I use CAST on its own, it rounds down?
View 5 Replies
View Related
Dec 1, 2000
Hi people,
I am trying to use Aggregate function like count or average on a column which has a datatype Varchar. In order to use avg or count on it , I am doing a cast on it.
If somebody has use Cast/Convert with aggregate function please help me
Thanks
Jesal
View 2 Replies
View Related
Jan 11, 2005
Hi! all
Can any body help me straighten this function. Just need to get the diffrence between the two time frame in Minutes
CREATE proc setup_DataReport
as
Declare @rc1 int
Declare @rc2 int
Declare @result int
SELECT @rc1 =count(AL_Coming)
FROM Alarm_Log
where convert(char(5),AL_Coming,14) between '09:00' and '10:00' AND
AL_State = 0
SELECT @rc2 = count(AL_Coming)
FROM Alarm_Log
where convert(char(5),AL_Coming,14) between '09:00' and '10:00' AND
AL_State = 1
select @rc1 as a
select @rc1 as a
set @result = sum(@rc1 - rc2)
print @result
go
View 2 Replies
View Related
Jan 14, 2008
I have not been able to find the answer as to why the LEFT() function doesn't see the variable as being a variable.
I originally thought it did not accept a variable as the first parameter, however the definition says it can be a variable.
Anyone knows why this isn't working?
This is how I have the code:
SELECT LEFT(@tpatdata, CHARINDEX('^', Alert1) -1)
the variable @tpatdata is the column name (tablename.Alert1), iif I rewrite it like this:
SELECT LEFT(tablename.Alert1, CHARINDEX('^', Alert1) -1) it works.
View 5 Replies
View Related
May 23, 2007
Hello to all,
I hope that somebody can help me.
I have written a sql query to search Partner. I have a wtcomValidRelationships Table. There are two Fields (IDMember(type: Int) and RelationshipIDs(type: varchar(1000)) in this table.
Example: 3418 has 3422 RelationshipID and 3422 has 4088 RelationshipID, if i want to check if there is a relationship between 3418 and 4088.
declare @IDM int;
declare @IDO char(100);
set @IDM = 3418;
set @IDO = '4088';
select B.IDMember
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDM and charindex(cast(B.IDMember as char(100)),A.RelationshipIDS) > 0
and charindex(@IDO,B.RelationshipIDs) > 0
Using this query i get nothing.
I try to use constant in charindex and i get result.
declare @IDM int;
declare @IDO char(100);
set @IDM = 3418;
set @IDO = '4088';
select B.IDMember
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDM and charindex('3422',A.RelationshipIDS) > 0
and charindex('4088',B.RelationshipIDs) > 0
So i think that charindex doesn't work with variable. But I must use variable. Can someone help me? What should i do ?
Thanks
Best Regards
Pinsha
View 1 Replies
View Related
Oct 24, 2015
playing with the Power pivot , DAX. While analyzing the DAX ,I came across a function EVALUATE , but when I tried this function in excel Power Pivot workbook - =EVALUATE 'Date' where 'Date' is my one of the Power pivot table , I was writing this function within the Calculation area of the Power Pivot model. I get the below error when I hit enter after writing the function ."The expression is not valid or appears to be incomplete..An MDX expression was expected while a full statement was specified."But in many forums I find the syntax is correct.
View 4 Replies
View Related
Aug 29, 2007
Hi
I am writing a application using the ODBC Calls to connect to MSSQL Database 2005 SP2.
I am using the Microsoft Visual Studio 6.0 for compilation
I have defined the UNICODE macro in the project settings.
Now when i am trying to connect to MSSQL Database using this call below
retcode = SQLConnect(dbc, (SQLTCHAR*) dsn, SQL_NTS,
(SQLTCHAR*) loginname, SQL_NTS,
(SQLTCHAR*) password, SQL_NTS);
I give a wrong username .
Then i use the function
SQLGetDiagRec to collect the error
void extract_error(char *fn,SQLHANDLE handle, SQLSMALLINT type)
{
SQLINTEGER i = 0;
SQLINTEGER native;
SQLTCHAR state[ 100 ] ;
SQLTCHAR text[256];
SQLSMALLINT len;
SQLRETURN ret;
memset(state,0,sizeof(state));
memset(text,0,sizeof(text));
fprintf(stderr,
""
"The driver reported the following diagnostics whilst running "
"%s",
fn);
do
{
ret = SQLGetDiagRec(type,
handle,
++i,
state,
&native,
text,
sizeof(text),
&len );
if (SQL_SUCCEEDED(ret))
_stprintf(_T("%s:%ld:%ld:%s"), (const TCHAR *)state, i, native, text);
_stprintf(_T("Error code %s "),(const TCHAR *)state);
}
while( ret == SQL_SUCCESS );
}
Now if i check the values of "state" and "native" i get it as 0.
If i use non unicode (i.e. remove the UNICODE macro) it works fine.
Best Regards
Manoj
View 1 Replies
View Related
Feb 7, 2006
Dear Community,We have a problem with null-Bytes in varchar-Columns, which are nothandled correctly in our application. Therefor we try to filter themout using the Transact-SQL REPLACE function.The Problem was, that the REPLACE-function didn't behave the way weexpected.Following Example demonstrates the behavior:declare @txt varchar(512)declare @i intset @txt = 'hello ' + char(0) + 'world'print @txtset @i = 1while @i <= len(@txt)beginprint str(@i) + substring(@txt, @i, 1)set @i = @i + 1endprint 'Length: ' + str(len(@txt))print 'trying to replace null-byte:'print replace(@txt, char(0), '*')print 'replace Letter h'print replace(@txt, 'h', char(39))-- end exampleOutput:hello1h2e3l4l5o678w9o10r11l12dLength: 12trying to replace null-byte:*replace Letter h'elloThe Null-Byte replace destroys the whole string. This behavior occursonly on some of ourdatabases. The others work correctly.Is it possible that it depends on some server setting?ThanksEnno
View 5 Replies
View Related
May 12, 2007
Hi
I'm a relative SQL Server newbee and have developed a function that converts mm/dd/yyyy to yyy/mm/dd for use as in a DT_DBDATE format for insert into a column with smalldatatime.
I receive the following erros when using the function in the Derived Column Transformation Editor. First, the function, then the error when using it as the expression Derived Column Transformation Editor.
Can anyone explain how I can do this transformation work in this context or suggest a way either do the transformation easier or avoid it altogerher?
Thanks for the look see...
******************************
ALTER FUNCTION [dbo].[convdate]
(
@indate nvarchar(10)
)
RETURNS nvarchar(10)
AS
BEGIN
-- Declare the return variable here
DECLARE @outdate nvarchar(10)
set @outdate =
substring(@indate,patindex('%[1,2][0-9][0-9][0-9]%',@indate),4)+'/'+
substring(@indate,patindex('%[-,1][0-9][/]%',@indate),2)+'/'+
substring(@indate,patindex('%[2,3][0,1,8,9][/]%',@indate),2)
RETURN @outdate
END
********************************
And the error...
expression "lipper.dbo.convdate(eomdate)" failed. The token "." at line number "1", character number "11" was not recognized. The expression cannot be parsed because it contains invalid elements at the location specified.
Error at Data Flow Task [Derived Column [111]]: Cannot parse the expression "lipper.dbo.convdate(eomdate)". The expression was not valid, or there is an out-of-memory error.
Error at Data Flow Task [Derived Column [111]]: The expression "lipper.dbo.convdate(eomdate)" on "input column "eomdate" (165)" is not valid.
Error at Data Flow Task [Derived Column [111]]: Failed to set property "Expression" on "input column "eomdate" (165)".
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0204006 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.SetInputColumnProperty(Int32 lInputID, Int32 lInputColumnID, String PropertyName, Object vValue)
at Microsoft.DataTransformationServices.Design.DtsDerivedColumnComponentUI.SaveColumns(ColumnInfo[] colNames, String[] inputColumnNames, String[] expressions, String[] dataTypes, String[] lengths, String[] precisions, String[] scales, String[] codePages)
at Microsoft.DataTransformationServices.Design.DtsDerivedColumnFrameForm.SaveAll()
View 3 Replies
View Related
May 8, 2008
Hi,
I'm trying to create a case function for home phone ,work phone and cell phone. The thing is some of the home phone numbers either null, zero or less than 10 digits then i'd like to get either cell phone or work phone if they are not null, zero or less than 10 digits.
I'd appreciate it if you could help me on this?
Thanks in advance.
View 19 Replies
View Related
Jan 16, 2007
Hi
Can anyone tell me how I can CAST these fields AS DECIMAL (19, 2) please?
(SELECT ([Total students] - [withdrawn] - [transferred] - [cancelled]) / [total Students] * 100 AS [Percentage Retained])
Thanks
Daniel
View 6 Replies
View Related
Dec 14, 2007
I have
CASE
WHEN (a.type_id in (9))
THEN a.duration
ELSE 0 --CAST ( expression AS data_type )
END 'Time'
I need the duration to be displayed if type is 9 only.
so otherwise id ideally want 'N/A' displayed..
but it won't display it as its not an int ..
is there a way i can just display it temporarily
instaed of 0 ?
View 5 Replies
View Related
Feb 5, 2008
I am having a little trouble with the CAST in my SELECT statement below. Any help is greatly appreciated.
SELECT
group_id_ AS [Group ID],
vendor_id_ AS [Vendor ID] ,
project_id_ [Project ID],
resource_id_ [Resource ID],
vendor_price_ [Old Price],
new_price_ [New Price],
(CAST (new_price_/vendor_price_)-1 AS DECIMAL (4, 2)) AS [Difference]
FROM hbs_vnpq
WHERE (group_id_ = '210') AND (vendor_id_ = '08416') AND (new_price_ >0) AND (vendor_price_ >0)
ORDER BY [Difference]
Server: Msg 1035, Level 15, State 10, Line 7
Incorrect syntax near 'CAST', expected 'AS'.
View 5 Replies
View Related
Sep 11, 2006
im doing a sum on a table and it either returns a number in decimal format or 'null' . The problem is when it returns null i want it to just make the text say '0.00'. So i did a test on the object that if it returns NULL just print '0.00' but if it is not null it tells me that there is a number there and i want to store that as a decimal and print it out. But i get an error for a type cast when im not it should not even be going to that part of the code. In the code below the first executescaler will return null so it should just go straight to the else. But it gives me the type cast error in the if that shouldnt be seen. The error and code are below. //Borrower NSF FEES
cmd.CommandText = "select sum(itemamount) from postmtdtls where loanid='" + LoanID + "' and Transactioncode = '310'";
object temp = cmd.ExecuteScalar();
if (temp != null)
{
decimal B_NSFFees = ((decimal)cmd.ExecuteScalar());
borrowerPayoff_NSFFees.Text = String.Format("{0:#,#.##}", B_NSFFees).ToString(); //Borrower NSF FEES
}
else
{
borrowerPayoff_NSFFees.Text = "0.00"; //borrowerPayoff_NSFFees.Text = "0.00";
} Server Error in '/WebSite5' Application. Specified cast is not valid. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Specified cast is not valid.Source Error: Line 774: if (temp != null)
Line 775: {
Line 776: decimal B_NSFFees = ((decimal)cmd.ExecuteScalar());
Line 777: borrowerPayoff_NSFFees.Text = String.Format("{0:#,#.##}", B_NSFFees).ToString(); //Borrower NSF FEES
Line 778: }Source File: c:ProgrammingFilesWebSite5InvestorPool.aspx.cs Line: 776 Stack Trace: [InvalidCastException: Specified cast is not valid.]
InvestorPool.GetLoanInfo(String LoanID) in c:ProgrammingFilesWebSite5InvestorPool.aspx.cs:776
InvestorPool.MortAccountText(Object sender, EventArgs e) in c:ProgrammingFilesWebSite5InvestorPool.aspx.cs:660
System.Web.UI.WebControls.TextBox.OnTextChanged(EventArgs e) +75
System.Web.UI.WebControls.TextBox.RaisePostDataChangedEvent() +124
System.Web.UI.WebControls.TextBox.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +7
System.Web.UI.Page.RaiseChangedEvents() +138
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4507
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
View 10 Replies
View Related
Oct 15, 2006
I am pretty new to SQL for SQL Server 2005. In a view I have a column CAST(Field1 as int). Field1 is a varchar.All works well except when the data is not numeric such as a '?' or '*'.How can I get around this, with a case statement, coalese?I only want to perform the CAST on valid numeric values.The valid values in the varchar field are blank, null,'0','1','2','3','4','5','?','*' and maybe othersThanks
View 11 Replies
View Related
Aug 31, 2007
If I run the following query in SQL Server Management Studio it returns the correct results: (Searching the table for the field "SpecimenID (an INT)" against the data entered (a Text Field - "7575-01") from the submitted form.
SELECT ClinicalID, SpecimenID, PatientID, LabID, Accession, Bacillus, Francisella, Yersinia, Brucella, Burkholderia, Coxiella, Staphylococcus, Other, OtherExplanation, CollectionDate, strddlTransportMedium, strddlSpecimenSource, UserName, Test, SpecimenCount, DateAndTimeFROM ClinicalSpecimenWHERE (SpecimenID = CAST('7575-01' AS VARCHAR(50)))ORDER BY SpecimenID DESCHowever, when I try to use the same logic in the ASPX.VB code behind page, as follows below, I either get an error message (Syntax error converting the varchar value '' to a column of data type int.) or record not found.... Can someone please explain what I am missing here....
MySQL = "SELECT * FROM ClinicalSpecimen WHERE SpecimenID = CAST(('" & AccessionPresent & "') AS VARCHAR(50))"
*"AccessionPresent" is the value of the text field retrieved from the form.
I guess what I am really asking is how can I search for an INT value in a table using a VARCHAR Field.
Thank you for any or all assistance !!!
View 6 Replies
View Related
Feb 18, 2008
Hi,I want to turn int to double/decimal in microsoft sqlSHould i use cast or convert?if so, how i do it thanks,
View 1 Replies
View Related
May 29, 2008
Hi over there,I hope this question is not too simple, but I didn't manage to figure out why...I would need an explanation for following issue:I'm reading data from a database (MSSQL) and it the column "PersonBirthday" is DBNull.I wanted to prevent the error (Textbox.Text = DBNull) with an IIF. The thing is I get thistypecast exception:"Conversion from type 'DBNull' to type 'Date' is not valid." This code is NOT working, why? txtPersonBirthday.Text = IIf(IsDBNull(.Item("PersonBirthday")) =
True, String.Empty,
CDate(.Item("PersonBirthday")).ToString("yyyy-MM-dd")) When I'm using this code, which is for me obviously the same, just with an if-block it works,and I want to know why - please explain. If IsDBNull(.Item("PersonBirthday")) Then txtPersonBirthday.Text = String.Empty Else txtPersonBirthday.Text = CDate(.Item("PersonBirthday")).ToString("yyyy-MM-dd") End IfThanks in advance,cheers,uquandux If IsDBNull(.Item("PersonBirthday")) Then txtPersonBirthday.Text = String.Empty Else txtPersonBirthday.Text = CDate(.Item("PersonBirthday")).ToString("yyyy-MM-dd") End If
View 3 Replies
View Related
Sep 16, 2004
Can anyone tell me what varbinary casts to ?? can I do this int[] temp=(int)DataReader["varbinaryColumn"]. Or is byte[] temp the appropiate protocol.
View 1 Replies
View Related
Apr 7, 2006
Can't seem to find why I'm getting this error: Specified cast is not valid.
Ok, using a stored procedure for SQL Server 2000 and here is the main part of it:
SELECT id, rank, firstName, lastName, service, status, createdTime FROM accessRequest WHERE lastName LIKE @tLastName AND firstName LIKE @tFirstName
And the C# code behind from the class file:
SqlDataReader spResults;
conn.Open();
spResults = command.ExecuteReader();
while( spResults.Read() )
{
AccessRequestSearch request = new AccessRequestSearch( (int)spResults.GetInt32( 0 ), spResults.GetString( 2 ), spResults.GetString( 3 ), spResults.GetString( 1 ), spResults.GetString( 4 ), spResults.GetString( 5 ), Convert.ToDateTime(spResults.GetString( 6 )));
searchResults.Add( request ); // Add to Array List
}
spResults.Close();
The part in red is where I think it's happening because that is what I just added to the request. createdTime in the table is set as DateTime.
Can anyone see what I am missing here?
More info is available if needed.
Thanks,
Zath
View 1 Replies
View Related
Oct 26, 2002
I have a table with a column called Sample_Date_and_Teime with a row definition of char(16). What is stored in this table is a date (ie. 1020621141517000) The first char is the century, the next are the year, the next two are the month, the next two are the day, the next 2 the hour, the next two are the minutes, and the next 2 are the seconds and the last 3 are to be ignored... what I need to do is write a select statement that converts this column into a datetime so that I can then do a insert into a new table by selecting from this table based on a date range. PLEASE HELP:confused: :confused: :confused:
View 1 Replies
View Related
Mar 15, 2006
I need Query syntax to cast/convert values as follws.
Val.: 00005000010260002180 - Result must be: 5.1.2600.2180
Val.: 00005000000213400001 - Reslut must be : 5.0.2134.1
Dots must also be contained in result
View 2 Replies
View Related
Feb 10, 2005
I use to import data from DBF Clipper databases into SQL Server. When a table is just imported its date fields have string format. I need to copy their data to tables of database where they ahve to be converted into date. Direct operator INSERT doesn't convert properly (I've not successed in changing default date format so it'll be covertable) but using CAST I can get result of strings like 13.05.1970 0:00:00 as datetime type. But not all records can be coverted this way. For ones can't be converted I've solved to make NULL fields there. But I don't know how to make CAST operation return NULL when convertion isn't possible. The query
INSERT INTO people_temp
(reg_num, surname, stname, patronymic, foreing, gender, birthdate, fam_pos, dwell_type, children, nation, par_not, region, stud_fml, parn_fml,
com_prob, sp_prob, sn_passport, nn_passport, dv_passport, wg_passport)
SELECT STUDENTs_temp.REG_NOM, STUDENTs_temp.FAMILY, STUDENTs_temp.NAME, STUDENTs_temp.PARN_NAME, STUDENTs_temp.INOSTR,
STUDENTs_temp.SEX,
CAST(PSPR_temp.DATA_BORN AS smalldatetime), PSPR_temp.SEM_POL, PSPR_temp.XAR_JT, PSPR_temp.CHILDREN,
PSPR_temp.NATION,
PSPR_temp.SV_ROD1 + PSPR_temp.SV_ROD2 AS Expr1, PSPR_temp.REGION, PSPR_temp.STUD_FML,
PSPR_temp.PARN_FML,
PSPR_temp.OB_STAJ, PSPR_temp.SP_STAJ, PSPR_temp.SN_PASPORT, PSPR_temp.NN_PASPORT, PSPR_temp.DV_PASPORT,
PSPR_temp.WG_PASPORT
FROM STUDENTs_temp INNER JOIN
PSPR_temp ON STUDENTs_temp.REG_NOM = PSPR_temp.REG_NOM
gets an error 'The conversion of char data type to smalldatetime data type resulted in an out-of-range smalldatetime value'. Tell me please how can make type casting return NULL if convertion isn't possible.
View 2 Replies
View Related
Feb 28, 2006
It must be something I'm overlooking but I keep getting an error message that this statement can't parse.
UPDATE product SET supplier = LEFT(supplier,LEN(supplier-4)) + CAST( '2100' AS varchar(4)) WHERE actualid = 'IS2100-CO2-CO2-0-4-I'
Any help would be greatly appreciated.
View 2 Replies
View Related
Oct 8, 2014
Have the following in my SELECT statement, which I'm having issues with when I modify it to include a CAST or a CONVERT.
CONCAT(PER.[PERSON-REF],ROW_NUMBER() OVER (PARTITION BY PER.[PERSON-REF] ORDER BY TEN.[tenancy-ref])) AS 'ID'How do I convert or cast it to a varchar (20)?
View 8 Replies
View Related
May 13, 2015
I found this nifty code on stackoverflow that works well but I'm trying to send the results to a text file and the column lengths are huge. I used CAST for the first line and it worked great but I can't seem to make it work with duration. Here's the original code:
SELECT
j.name,
h.run_status,
durationHHMMSS = STUFF(STUFF(REPLACE(STR(h.run_duration,7,0),
' ','0'),4,0,':'),7,0,':'),
[code]....
how to run a CAST on DURATION?
View 5 Replies
View Related
Apr 10, 2008
I have a quick question. created a report with this formula below. It works when I put a date range from 1-1-2007 to 2-1-2007, but when I put in a date range of 03-01-2008 through 03-31-2008. i get an error message of arithmetic overflow error converting numeric to data type numberic.
So instead of haveing the formula below be (4,2) I put it as (5,2) and now it work. Why is that?
CAST(clm_sppo / clm_tchg * 100 AS decimal(4, 2)) AS PercentSavings
View 3 Replies
View Related
Apr 24, 2008
Hi all,
i need help for deleting the time from a datetime type
what i mean is that instead of
2007-08-15 01:30:00.000
i would get
2007-08-15 00:00:00.000
many thanks
View 2 Replies
View Related
Apr 27, 2008
Hi ,
I have a problem with casting a string number to int.
for exmaple i have the number '0110' (string) and i would like it to be 110. or '0001' to be 1.
i tried to do:
cast(MyNUM as int) .
but i get "Syntax error converting the nvarchar value 'O322' to a column of data type int."
is anyone have any idea how to solve it ?
thanks
View 3 Replies
View Related
