Can't Pass Search Text Into Stored Procedure
Jun 7, 2007
I am trying to inject dynamically generated text into a Sql2000 stored procedure. What am I doing wrong?
A code behind routine generates the following string value based on a visitor entering 'sail boats' in TextBox1. The routine splits the entry and creates the below string.
Companies.L_Keywords LIKE '%sail%' AND Companies.L_Keywords LIKE '%boats%'
I am trying to place this string result in the WHERE statement of a Sql2000 Stored Procedure using parameter @VisitorKeywords.
PROCEDURE dbo.KWsearch
AS
SELECT DISTINCT Companies.L_Name, Companies.L_ID, Companies.L_Enabled
WHERE ( @visitorKeywords ) AND (Companies.L_Enabled = 1)
ORDER BY Companies.L_Name
I am wanting the resulting WHERE portion to be:
WHERE ( Companies.L_Keywords LIKE '%sail%' AND Companies.L_Keywords LIKE '%boats%' ) AND (Companies.L_Enabled = 1)
Thank you
View 10 Replies
ADVERTISEMENT
Mar 29, 2008
Hi - I'm short of SQL experience and hacking my way through creating a simple search feature for a personal project. I would be very grateful if anyone could help me out with writing a stored procedure. Problem: I have two tables with three columns indexed for full-text search. So far I have been able to successfully execute the following query returning matching row ids: dbo.Search_Articles @searchText varchar(150) AS SELECT ArticleID FROM articles WHERE CONTAINS(Description, @searchText) OR CONTAINS(Title, @searchText) UNION SELECT ArticleID FROM article_pages WHERE CONTAINS(Text, @searchText); RETURN This returns the ArticleID for any articles or article_pages records where there is a text match. I ultimately need the stored procedure to return all columns from the articles table for matches and not just the StoryID. Seems like maybe I should try using some kind of JOIN on the result of the UNION above and the articles table? But I have so far been unable to figure out how to do this as I can't seem to declare a name for the result table of the UNION above. Perhaps there is another more eloquent solution? Thanks! Peter
View 3 Replies
View Related
May 16, 2008
Hello,
I was wondering if you could help resolve a simple question - namely how to input a type text value as a parameter to a stored procedure, which expects that type of input.
Text type variables are not allowed and casting to varchar in this case will not work as the input will be far longer than 8000 characters.
Thanks!
View 3 Replies
View Related
May 28, 2006
Hi,
I'm new to ASP.NET 2.0. I have a sqldatasource and a formview controls on a web page and inside the formview control I have two textboxes. When I click the UPDATE button in the formview, I'd like to be able to retrieve the values of the textboxes inside the formview control and pass these values to a 'Update' SQL stored procedure defined in the Sqldatasource.
Does anyone know how I can do this? Hope my question is clear.
Thanks in advance.
hakl
View 1 Replies
View Related
Sep 7, 2007
I need to create a stored procedure that allows a full text search with multiple filters. The FTS is a three variable proximity (x near y near z) drawing from three textboxes which works fine in my VB application:
WHERE CONTAINS(SectionText, ' """ & SearchTerm1 & """ NEAR """ & SearchTerm2 & """ NEAR """ & SearchTerm3 & """ ')
The filters consist of 4 comboboxes and 2 textboxes. I am trying to use the dynamic SQL approach found here:
http://www.sommarskog.se/dyn-search.html
The dynamic SQL in the stored procedure that I have created based on this model works fine for filtering, but I have not been able to get my FTS query integrated with it. I have tried various ways of declaring the SearchTerms as parameters, etc. but no luck.
Any help in getting this to work (or advice for using a different approach that is more appropriate) would be greatly appreciated.
Code Snippet
CREATE PROCEDURE ECR_Advanced_Search2
@fulldocno nvarchar(10) = NULL,
@doctype nvarchar(10) = NULL,
@year nvarchar(6) = NULL,
@sex nvarchar(7) = NULL,
@category nvarchar(10) = NULL,
@agenum smallint = NULL,
@agecat nvarchar(10) = NULL,
@debug bit = 0 AS
DECLARE @sql nvarchar(4000),
@paramlist nvarchar(4000),
@searchterm1 nvarchar(100),
@searchterm2 nvarchar(100),
@searchterm3 nvarchar(100)
SELECT @sql =
'SELECT FullDocuments.FullDocNo, FullDocuments.DocType, Details.Year
FROM FullDocuments
INNER JOIN Details ON FullDocuments.FullDocNo = Details.FullDocNo
WHERE 1 = 1 AND CONTAINS(SectionText, @searchterm1 NEAR @searchterm2 NEAR @searchterm3)'
IF @fulldocno IS NOT NULL
SELECT @sql = @sql + ' AND FullDocuments.fulldocno = @xfulldocno'
IF @DocType IS NOT NULL
SELECT @sql = @sql + ' AND FullDocuments.DocType = @xDocType'
IF @year IS NOT NULL
SELECT @sql = @sql + ' AND Details.year = @xyear'
IF @sex IS NOT NULL
SELECT @sql = @sql + ' AND Details.sex = @xsex'
IF @category IS NOT NULL
SELECT @sql = @sql + ' AND Details.category = @xcategory'
IF @agenum IS NOT NULL
SELECT @sql = @sql + ' AND Details.agenum = @xagenum'
SELECT @sql = @sql + ' ORDER BY FullDocuments.FullDocumentID'
IF @debug = 1
PRINT @sql
SELECT @paramlist =
'@xfulldocno nvarchar(10),
@xdoctype nvarchar(10),
@xyear smallint,
@xsex nvarchar(7),
@xcategory nvarchar(10),
@xagenum smallint,
@xagecat nvarchar(10)'
EXEC sp_executesql @sql, @paramlist, @doctype,
@fulldocno, @year, @sex,
@category, @agenum, @agecat
View 7 Replies
View Related
Oct 24, 2006
I thought this would be quite simple but can't find the correct syntax:ALTER Procedure usp_Product_Search_Artist_ProductTitle
(@ProductTitle varchar(255))
AS
SELECT ProductTitle
FROM tbl_Product
WHERE CONTAINS(dbo.tbl_Product.ProductTitle, @ProductTitle)
My problem is that if I pass "LCD Flat Screen" as teh @ProductTitle parameter the query falls over as it contains spaces. Guess i'm looking for something like: WHERE CONTAINS(dbo.tbl_Product.ProductTitle, '"' + @ProductTitle + "'")Thanks in advance.R
View 4 Replies
View Related
Sep 13, 2007
I have an issue trying to pass a search text parameter to FREETEXTTABLE via Dataset.
The following code works fine if you hardcode the search word/text as shown:
SELECT KEY_TBL.RANK, FT_TBL.FaqQuestion, FT_TBL.FaqAnswer, FT_TBL.SearchFROM faq_table AS FT_TBL INNER JOIN FREETEXTTABLE(faq_table, Search, 'cool') AS KEY_TBL ON FT_TBL.FaqID = KEY_TBL.[KEY]ORDER BY KEY_TBL.RANK DESC
Now, I want to do this:
SELECT KEY_TBL.RANK, FT_TBL.FaqQuestion, FT_TBL.FaqAnswer, FT_TBL.SearchFROM faq_table AS FT_TBL INNER JOIN FREETEXTTABLE(faq_table, Search, @Search) AS KEY_TBL ON FT_TBL.FaqID = KEY_TBL.[KEY]ORDER BY KEY_TBL.RANK DESC
The error I'm getting is @Search is not declared. How am I suppose to pass in a value?
I have searched almost everywhere and nobody seemed to ask this precise question. I'm sure this is a huge problem.
Can anyone help me please?
View 3 Replies
View Related
Jan 21, 2014
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
View 5 Replies
View Related
Feb 22, 2007
Hi,
i need to insert a record 1 or more times, depending of a variable in code-behind:dim amount as integeramount= value (e.g. 3)
My problem is: how to pass that variable to the stored procedure?I tried with this but nothing happens:
comd.Parameters.Add("@amount", SqlDbType.NVarChar, 10).Value = amount_of_details
Maybe is my stored procedure wrong?
Thanks
T.
Here is it:----------
ALTER PROCEDURE dbo.insert_table (@field1 nvarchar(10),...)ASDeclare @iLoopNumber intDeclare @amount intBEGIN TRAN
SET @iLoopNumber = 1
SET @amountr
While (@iLoopNumber <= @amount)
BEGIN
INSERT INTO table(field1,...)
VALUES (....))
SET @iLoopNumber = @iLoopNumber +1
End
COMMIT TRAN
View 3 Replies
View Related
Aug 11, 2007
How do I pass values from my ASP.NET page code into my Stored Procedure, to become parameters to be used in my Stored Proc?
Much thanks
View 2 Replies
View Related
Sep 19, 2005
Hi I have an if clause in my code to add the final parameter value to send to the database.
If Page.User.IsInRole("MICMS") Then
cmdCheckUser.Parameters.Add("@C_ID", 0)
Else
cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID"))
End If
If the user is in the role, the error is triggered saying that @C_ID
is expected by the stored procedure. If i then change the value from 0
to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.
View 1 Replies
View Related
Nov 30, 2005
hi,i am passing a xml file name to the stored procedure. the SP parses the file. but it is giving the error' INVALID AT THE TOP LEVEL OF THE DOCUMENT 'I expect this because of + and - in the xml file bafore the parent tags.how can i do the parser to eliminate these.
View 1 Replies
View Related
Mar 9, 2006
How can I pass a parameter to a stored procedure using Visual Web Developer 2005? I have created a SQLDataSource that calls the SP.
Thanks
--R
View 1 Replies
View Related
May 7, 2001
I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.
View 3 Replies
View Related
May 2, 2006
Hello,I read an article on how to use Yahoos API to GeoCode addresses. Basedon the article I created a stored procedure that is used as follows:SPGeocode '2121 15st north' ,'arlington' ,'va' ,'warehouse-test'Returns:Latitude Longitude GeoCodedCity GeoCodedState GeoCodedCountryPrecision Warning----------- ---------- ------------- ------------- ------------------------------ --------38.889538 -77.08461 ARLINGTON VA USPrecision Good No ErrorIt returns Latitude and Longitude and other information. Works great.In conjunction with Haversine formula, I can compute the distancebetween two locations if I know the Lat and Long of the two points.This can start to answer questions like "How many students do we havewithin a 10 mile radius of Location X?"(Marketing should go nuts over this :)My question is how can i use my data from a table and pass it to theSPGeocode via a select statement?The table I would use is:CREATE TABLE "dbo"."D_BI_Student"("STUDENT_ADDRESS1" VARCHAR(50) NULL,"STUDENT_ADDRESS2" VARCHAR(50) NULL,"STUDENT_CITY" VARCHAR(50) NULL,"STUDENT_STATE" VARCHAR(10) NULL,"STUDENT_ZIP" VARCHAR(10) NULL);This is so new to me, I am not even sure what to search.TIARob
View 4 Replies
View Related
Jan 9, 2007
Dear All,
I am using sql2000, I want to know whether in stored procedure we can pass
array. Or is there any other solution to pass array of records
Please Guide Me
thanks
View 3 Replies
View Related
Jun 18, 2007
Hello,
I have a VB.NET stored procedure as below:
Code Snippet
Partial Public Class StoredProcedures
Public Shared Sub My_UpdateCountsManaged( ByRef paramInOut As Integer)
'here I perform update statement using "paramInOut" passed form calling code
.......
'then I return value to the calling code
paramInOut = 555
End Sub
End Class
Calling code specifies a parameter like this:
Code Snippet
Dim param as Sqlparameter = New SqlParameter("@paramInOut", SqlDbType.Int)
param.Direction = ParameterDirection.InputOutput
param.Value = 999
cmd.Parameters.Add(param)
When I execute the code, it surely gets back "555" from SP, the problem is that SP never gets "999" from calling code despite ParamDirection is InputOutput. It always receives 0. I am afraid I don't understand something fundamental ?
Any help would be appreciated.
Thanks a lot,Fly.
View 4 Replies
View Related
Feb 1, 2008
Hi,
I want to pass an xml file to stored procedure in SQL Server 2000 as a parameter.
Can we pass the xml file path as a parameter? if not then how can it be done.
I want to serialize data to XML and then pass it to a procedure to insert data.
Kindly help ASAP.
Thanks
View 4 Replies
View Related
May 16, 2008
When I run the following code I get error "Incorrect syntax near 'MyStoredProcedureName".
Code Snippet
public static string GetWithDate(string date)
{
string connString = System.Configuration.ConfigurationManager.ConnectionStrings["Development"].ToString();
SqlConnection conn = new SqlConnection(connString);
conn.Open();
XmlDocument xmlDoc = new XmlDocument();
SqlCommand cmd = new SqlCommand("usp_SVDO_CNTRL_GetPalletChildWorkExceptions", conn); //sw.WriteLine(count++);
cmd.Parameters.Add(new SqlParameter("@date", date));
try
{
cmd.ExecuteReader();
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
SqlDataReader rdr = cmd.ExecuteReader(); //<---Bombs
if (conn != null)
conn.Close();
return xmlDoc.InnerXml;
}
I'm assuming this is because my Date is in the wrong format when .NET passes it. I've tested the stored procedure directly in SQL Server Managent Studio and it works (Format of date is '5/15/2008 9:16:23 PM').
View 3 Replies
View Related
Apr 29, 2008
How can I pass a parameter to a stored Procedure from another stored procedure in SQL 2005?
Thnak you,
View 3 Replies
View Related
Apr 3, 2007
In the snippet below, ExecuteSqlString is a stored procedure that accepts one parameter. SelectChangeDropdownRowsource is a function in my code behind page that generates the string I want to pass. I can't seem to find the correct syntax to get it to work. The way it is show below, the error comes back about incorrect syntax near ')' . Is this doable?
<asp:SqlDataSource ID="ChangeInfo" runat="server" ConnectionString="<%$ ConnectionStrings:xxx %>"
DataSourceMode="DataReader" ProviderName="<%$ ConnectionStrings:xxx %>"
SelectCommandType=StoredProcedure
SelectCommand="ExecuteSqlString">
<selectparameters>
<asp:parameter name="sqlString" Type=String DefaultValue=SelectChangeDropdownRowsource()/>
</selectparameters>
</asp:SqlDataSource>
View 6 Replies
View Related
Oct 29, 2007
hi,
i searched a lot to find how to pass an orderBy parameter finally i used a case block in my code and it works now how can i add a second parameter for ascending and descending order(@sortAscOrDesc)
when i use it after the end of case statement i get error
here is my sp:CREATE PROCEDURE [userPhotos]
@userID int,@orderBy varchar(100)
ASSELECT ID,UserID,Photo,ALbumID,Title,views,date_added from userAlbumPic where userID=@userID and albumID=0 order by
case @orderBy
when 'date_added' then date_added
when 'views' then [views]
else date_added
end
GO
View 7 Replies
View Related
Dec 18, 2007
i am trying to pass a large XML file from VS2005 (web service layer) to stored procedure (SQL Server 2000)In my stored procedure, the input parameter takes as "nText" (which will be XML file)Question:While performing ExecuteNonQuery, i am getting request timeout i think this is coz of large XML file i am passing.can anyone plz tell me how to pass XML file to SP...it would be better if you can provide me with some codei am completely new to this XML file passing between web service and SP...... thanks a lot in advance.....
View 7 Replies
View Related
Feb 19, 2008
I have stored procedure that expects 2 input parameters (@UserID uniqidentifier and @TeamID int). My datasource is SQLDataSource. So i need to pass parameters to SP..When i add parameters ans execute i got an error "....stored procedure expects @TeamId parameter, which was not supplied" But i pass them. How should i pass parameters? Maybe the reason is some mismatching of parametrs. 1 Parameter [] param = new Parameter[2];
2
3 param[0] = new Parameter();
4 param[0].Name = "@TeamID";
5 param[0].Type = TypeCode.Int32;
6 param[0].Direction = ParameterDirection.Input;
7 param[0].DefaultValue = "1";
8
9 param[1] = new Parameter();
10 param[1].Name = "@UserID";
11 param[1].Direction = ParameterDirection.Input;
12 param[1].DefaultValue = "edf26fd8-d7cd-4b32-a18a-fc888cac63ef";
13 param[1].Type = TypeCode.String;
14
15 dataSource = new SqlDataSource();
16 dataSource.ID = "Source";
17 dataSource.ConnectionString = settings.ToString();
18
19 dataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
20 dataSource.DataSourceMode = SqlDataSourceMode.DataReader;
21 dataSource.SelectCommand = "dbo.GetAprfAssessmentTeamData";
22
23
24 dataSource.SelectParameters.Add(param[0]);
25 dataSource.SelectParameters.Add(param[1]);
26
View 4 Replies
View Related
Mar 26, 2008
Hi,
I want to create a stored procedure which I can pass multi parameters. This is what I need, I have a gridview which is used for displaying customer info of each agent. However, the number of customers for each agent is different. I will pass customer names as parameters for my stored procedure. Here is a sample,
CREATE PROCEDURE [dbo].[display_customer]
@agentID varchar(20),
@customer1 varchar(20),
@customer2 varchar(20),
..... -- Here I do know how many customers for each agent
AS
SELECT name, city, state, zip
FROM rep_customer
WHERE agent = @agentID and (name = @customer1 or name = @customer2)
Since I can not decide the number of customers for each agent, my question is, can I dynamically pass number of parameters to my above stored procedure?
Thanks a lot!
View 6 Replies
View Related
Apr 7, 2008
hi friends,i need to select some of the employees from the EmpMaster using in clause. I tried to pass a string with the comma delemeters. it didn't produce all the records except the first in that string.shall i try with string functions in TSQL or any other options? Thanks and Regads,Senthilselvan.D
View 4 Replies
View Related
Jun 5, 2008
Either method is in the “ASPX� file
This is a DataSource for a “DetailsView� which has on top of “DeleteCommand� an “InsertCommand� a “SelectCommand� and an “UpdateCommand�. It is related to a GridView and the “@DonationRecID� comes from this GridView.
Method 1. Using an SQL Query – this works fine <asp:SqlDataSource ID="donationDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:FUND %>" DeleteCommand="DELETE FROM [Donations] WHERE [DonationRecID] = @DonationRecID">
Method 2. – using a stored procedure – this bombs because I have no clue as to how to pass “@DonationRecID� to the stored procedure "Donations_Delete". <asp:SqlDataSource ID="donationDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:FUND %>" DeleteCommand="Donations_Delete" DeleteCommandType="StoredProcedure"> How do I pass “@DonationRecID� to the "Donations_Delete" stored procedure?
Does anyone have an example of how I can do this in the “ASPX.CS� file instead.
View 3 Replies
View Related
May 11, 2005
sSQL = "spBPT_Fuel_Set_Status_Approved"
cmdDailyPrices.CommandText = sSQL
cmdDailyPrices.Parameters.Add("@user", "Philippe")
cmdDailyPrices.Parameters.Add("@verbose", "0")
cmdDailyPrices.Parameters.Add("@Day_1_add", rowBand1.Cells(DayParameters.AddFactor).Value)
cmdDailyPrices.Parameters.Add("@Day_1_multiply", rowBand1.Cells(DayParameters.MultiplyFactor).Value)
cmdDailyPrices.Parameters.Add("@Day_2_add", "NULL")
cmdDailyPrices.Parameters.Add("@Day_2_multiply", "NULL")
For @Day_2_add and @Day_2_multiply parameters I want to pass the value as NULL not string "NULL"
could you please let me know how to do this?
Thanks
View 1 Replies
View Related
Nov 30, 2005
hi,i have created a stored procedure to read xml dataCREATE PROCEDURE InsertXML(@xml varchar(1000)) AS DECLARE @XmlHandle intEXEC sp_xml_preparedocument @XmlHandle output,@xmlinsert into Employee(Name,ID,Sal,Address) (SELECT Name,ID,Sal,AddressFROM OPENXML (@XmlHandle, 'emp:EmployeeDetails/emp:Employee',2) WITH (Name varchar(30) 'Name', ID int 'ID', Sal int 'sal', Address varchar(30) 'Address'))EXECUTE sp_xml_removedocument @XmlHandlebut it is taking only xml text as input.but i want to send the file name as input.how to do it.
View 2 Replies
View Related
Nov 17, 2006
Currently i am working in a project of report generation in MS ACCESS.
The tables are in sql server 2000.
I have to write stored proc in ms access.
Illustration:
I am having a stored proc as follows
name: myproc
-------------------
Create procedure my_proc
@f1 char(1),
@f2 char(5)
As
select * from table1 where field1=@f1 and field2=@f2
________________________________________________
and calling proc
name: call_myproc
execute my_proc 'A','2004'
If i am getting the vales of field1/@f1 and field2/@f2 from forms in ms access.
I have to get the values from forms in ms access.
I have to write the calling proc as follows
my_proc [forms]![form_a].[Combo4],[forms]![form_a].[text12]
But ms access throws syntax error.
How is it possible to pass values from ms access FORMS to a calling stored procedure.
I have followed the way of creating and executing the stored procedure as given in the article as follows.
http://www.databasejournal.com/features/msaccess/article.php/10895_3363511_1
As per the given link. They did not give values dynamically.
could you please help me to fix this problem ?
regards,
Krishna
View 1 Replies
View Related
Aug 30, 2007
Hi,
I need to automate the procedure of selecting column with numeric and passing those column values as string to another stored procedure.
Here is sample code :
CREATE procedure procdeure1 @Utility varchar(50) WITH RECOMPILE
as
if @Utility='Electricity'
begin
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmers1')
DROP TABLE gmmers1
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmers2')
DROP TABLE gmmers2
create table gmmers1(sitecode varchar(15),
Gen_Electricity_Usage bigint
)
create table gmmers2 (gmmerssitecode varchar(15),
Gmers_Electricity_Usage bigint
)
insert into gmmers1
Select site.Sitecode,sum(isnull(AcctRptdata.ElectricityUse,0)*factor) as 'Electricity Usage'
From GEN..AcctRptdata AcctRptdata, GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings
Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and
--((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and
((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and
site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')
and len(sitecode ) = 8
and AcctRptdata.idsvc in (100) and
SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitElec and
SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 1
and site.Sitecode not like '%B%'
and site.sitecode not like '9999%'
and AcctRptdata.ElectricityUse >0 --Added on 16th Aug
and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)--= 11)
--and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11)
Group by site.Sitecode having sum(AcctRptdata.ElectricityUse*factor) > 0 Order by site.Sitecode
insert into gmmers2
select left (sitecode, 8) BU, sum(isnull(KWh_Purchased_Quantity, 0 )) as 'electric use' from gmers_prodn..electricity_data
where sitecode in --(select sitecode from facility_data where left (sitecode ,8) in
(select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 )
-- and len (sitecode) = 11)
and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01'
--and sitecode like 'A0916323%'
and sitecode not like '%B%' and left(sitecode,8) not in ('N0010024','N0010088','N0010101','N0010173',
'N0010373','N0010447') and sitecode not like '9999%'
group by left (sitecode, 8) order by left (sitecode, 8) -- yyyy-mm-dd
select *,(Gen_Electricity_Usage-Gmers_Electricity_Usage)as Diff from gmmers1,gmmers2
where gmmers1.sitecode=gmmers2.gmmerssitecode and (Gen_Electricity_Usage-Gmers_Electricity_Usage) <>0
end
else if @UTILITY='GAS'
begin
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gengas')
DROP TABLE gengas
IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'gmmersgas')
DROP TABLE gmmersgas
create table gengas(sitecode varchar(15),
Gen_Gas_usage bigint
)
create table gmmersgas (gmmerssitecode varchar(15),
Gmers_Gas_Usage bigint
)
insert into gengas
Select site.Sitecode,sum(isnull(AcctRptdata.NaturalGasUse,0)*factor) as 'Gas Usage' From GEN..AcctRptdata AcctRptdata,
GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings
Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and
--((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and
((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and
site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')and
len(sitecode ) = 8 and AcctRptdata.idsvc in (200,300) and
SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitGas and
SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 61
and site.sitecode not like '%B%' and site.sitecode not like '9999%'
and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)
and AcctRptdata.NaturalGasUse >0 ----Added on 16th Aug
--and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11)
Group by site.Sitecode having sum(AcctRptdata.NaturalGasUse*factor) > 0 Order by site.Sitecode
insert into gmmersgas
select left( sitecode, 8 ) BU , sum(Utility_Natural_Gas_Volume) as 'gas use' from GMERS_PRODN..fuel_data
where sitecode in --(select sitecode from facility_data where left (sitecode,8) in
(select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 )
-- and len(sitecode )= 11 )
and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01'
and sitecode not like '%B%' and sitecode not like '9999%'
group by left( sitecode, 8 ) order by left( sitecode, 8 )
select *,(Gen_Gas_usage-Gmers_Gas_Usage)as Diff from gengas,gmmersgas
where gengas.sitecode=gmmersgas.gmmerssitecode and (Gen_Gas_usage-Gmers_Gas_Usage)<>0
end
My aim is to pass sitecode having difference <>0 and from date and todate as an parameter to another stored procedure which updates sitewise for the utility so that in case a particular sitecode with same date range is included in one utility it should not be repeated in another utility.
View 1 Replies
View Related
Dec 16, 2005
Hi all,Seems like a fundamental question to me but I dont have a definiteanswer for it, Gurus please enlighten me.I have a table 'Table1' whose structure changes dynamically based onsome configuration values from another table. This table is being usedby a program, It was initially used by this program which ran as asingle task (executing at only a specific interval) but now the programhas to be run mutiple times some coinciding with each othe - whichmeant that table structure will change as 2 programs are runningsimultaneously... and therefore I have decided to use seperate tablenames that each has a structure of its now.I use this table name 'Table1' in about 10-15 stored procedures andUDF'sto make the long story short: Since I will not know which table I willbe using in the program I want to pass the table name as an argument tothe SP and UDF's and then access this param in the'select's/updates/inserts' - but this doesn't work unless I use DynamicSQL.Is there any other way of passing table names as parameters and thenusing then in the procs?any ideas will be really helpful.adi
View 5 Replies
View Related
Dec 2, 2007
Hi,
I have a kind of problem. In SQL Server I have a stored procedure ressembling this:
Code Block
ALTER PROCEDURE procedure1
(
@param int
)
SELECT * FROM table WHERE param = @param
Now I want to call this procedure and pass it to a cursor. We all know you can do this:
Code Block
DELCARE cursor1 CURSOR for
SELECT * FROM table WHERE param = @param
.. , but I want something like this:
Code Block
DECLARE cursor1 CURSOR for
EXEC procedure1 @param
Is it possible? I could solve it in another, but then I have to connect 2x to the database, which is less performant.
I have also tried something like this:
Code Block
ALTER PROCEDURE procedure1
(
@param int
)
SELECT @test = id FROM table WHERE param = @param
RETURN @test
ALTER PROCEDURE procedure2
(
@param int
)
DECLARE @var varchar(100)
EXEC @var = procedure1 @param
But then it returns always 0.
So is there a way to pass a procedure's select to a cursor?
Thanks in advance
Stevevil0
View 1 Replies
View Related
