Can't Run Query Today That Ran Fine Yesterday
Nov 15, 2007
I converted an Access db to SQL Server 2005 Express using FullConvert Enterprise and the conversion went well. I ran a few queries. When I logged in today and run the same exact query (saved it) I get this error:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'tblTXMup'.
I googled the error and someone in another forum said to check ownership, that it would throw that error if another user who was not dbo tried to run a query. I checked and the owner is sa. I logged in as sa and get the same error.
Anyone have an idea what happened?
View 5 Replies
ADVERTISEMENT
Nov 15, 2007
I converted an MS Access db to SQL Server 2005 Express yesterday. I used FullConvert Enterprise for the conversion and it worked great. I ran several queries and saved them, and they ran fine. Today, running the same queries, I get this error message:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'tblTXMup'
I googled the message and found someone who had a similar problem and their answer was they were not the dbo. I checked the new database and it was owned by sa so I logged in as sa and got the same error.
Can anyone set me straight so I can get into this db?
Thanks,
View 14 Replies
View Related
Aug 23, 2014
I have to do a report for each hour compare yesterday each hour of sales amount their output is below, how to write a query.
desire output 08:00 am -23:00pm
shop today Time yesterday current Amt Yest Amt diff amount
001 13:00-14:00 13:00-14:00 $10000 $20000 -10000 (down)
002 14:00-15:00 14:00-15:00 $10000 $15000 500 (up)
Time as at HH:MM
Yesterday Total $20000
today Total $35000
View 2 Replies
View Related
Oct 16, 2007
OK, the thread's name is not very self explanatory so here I go:
The fact
I'm working on a simple APP where I store the date of a transaction. I use in my Stored Procedure the getdate() as the default (and untouchable) value for the transaction date
The problem:
These transactions are made all day long and there are transctions made on the morning and afternoon. Now, when I make a report of the transactions for one specific range of days, all the transactions made in the morning of the start date are ignored completely.
Say I have these transactions
TCode TType TDate
45 REQ 03/09/2007 08:20:16 a.m.
46 REQ 03/09/2007 11:59:43 a.m.
47 REQ 03/09/2007 12:01:30 p.m.
48 REQ 03/09/2007 06:01:49 p.m.
and I make this query
SELECT * FROM <Table Name> WHERE TDate BETWEEN <Start Date> AND <End Date>
(where <Start Date> && <End Date> are 03/09/2007 selected from a DateTimePicker control)
I only get these results 47 REQ 03/09/2007 12:01:30 p.m.
48 REQ 03/09/2007 06:01:49 p.m.
if I make a cast as integer I get these results:
TCode TDate TCast
46 2007-09-03 11:59:43.000 39326
47 2007-09-03 12:01:30.000 39327
so my question is
Why are the Morning Transactions from the start date ignored (or interpreted as part of previous day transactions) ?
View 1 Replies
View Related
Dec 2, 2008
Howto write a query which will find the date from yesterday 12.00am till yesterday 11.59.59PM. that means yesterday 24 hrs only. If I use getdate it will show me the date which is right now which i don't want. everyday i need to search the data from yesterday whole day.
View 13 Replies
View Related
Mar 20, 2004
I would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month],
FROM RECalendar
WHERE
(EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101)))
AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
Thank you for your assistance in advance.
Joel
View 1 Replies
View Related
Dec 19, 2003
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
View 1 Replies
View Related
Nov 1, 2006
Hello , i want to writ a query that returns ruslts for today's date only,
How to do it? i tried to filter the results using Now() function but it did`t work, any help please?
View 5 Replies
View Related
Jul 23, 2005
select no_dossier from dbo.membre where date_MAJ = GETDATE()select no_dossier from dbo.membre where date_MAJ = '2005-07-21'Both should give me the same result, yes or no?thanks
View 1 Replies
View Related
Jul 23, 2005
select no_dossier from dbo.membre where date_MAJ = GETDATE()select no_dossier from dbo.membre where date_MAJ = '2005-07-21'Both should give me the same result, yes or no?thanks
View 11 Replies
View Related
Apr 24, 2008
Hi,
I have a query as mentioned below:
SELECT BillCurrencyID,DistD,Amount,PartnerFlag1
FROM Factsales_tab_Dtls (NOLOCK)
WHERE (sales_year =2007 OR sales_year=2008)
AND Country ='US'
1) Table Factsales_tab_Dtls is having more than 5.5 million of records.
2) It is having 32 columns.
3)There's nonclusetered index on columns sales_year & country
4)The query takes longer time for execution
Please help me fine-tune the query
View 1 Replies
View Related
Jul 20, 2005
Hi, I have problem running this query. It will time out for me...My database are small just about 200 members.I have a site for swaping appartments (rental). my query should lookfor matchin a triangle. Like this member A -> B->CA give his appartment to B. B gives his appartment to C and finallyC gives his appartment to ASoo my query looks for matching parameters like rooms, location, sizeandsoo on..I have one table for existing appartments and one for "whantedappartments"and 1 table called "intresse" where members can store "yes" or "no" ifthey are interessted in a appartment.I also have a table called "omrade" to store locations of interest.Hope you can helpe me with some tip soo i can run this query in a fewseconds instead of 20-30 secThanks MSELECTF.medlemsNr as medlemsNr, F.lfId AS lfId, F.ort AS ort, F.gatuadressAS gatuadress, F.gatuNr AS gatuNr, F.rum AS rum,F.storlek ASstorlek,F.hyra AS hyra, count(F.medlemsNr) As hitsFROMmedlem08 A, medlem08 B, medlem08 C, lagenhetF08 D,lagenhetO08 E, lagenhetF08 F, lagenhetO08 G, lagenhetF08 H,lagenhetO08 IWHERED.rum >= I.rumMin AND D.rum <= I.rumMax ANDD.storlek >= I.storlekMin AND D.storlek <= I.storlekMax ANDI.hyraMax = 0" & " OR D.hyra <= I.hyraMax) ANDI.balkong = '" & "" & "' OR D.balkong = I.balkong) AND(I.badkar = '" & "" & "' OR D.badkar = I.badkar) AND(I.bredband = '" & "" & "' OR D.bredband = I.bredband) AND(I.hiss = '" & "" & "' OR D.hiss = I.hiss) AND(I.spis = '" & "" & "' OR D.spis = I.spis) AND(I.brf = '" & "" & "' OR D.brf = I.brf) ANDD.postNr IN (select postNr from ONSKEMAL08 where loId=I.loId) ANDF.medlemsNr Not IN (select medlemsNr2 from INTRESSE08 wheremedlemsNr1=A.medlemsNr) ANDH.rum >= G.rumMin AND H.rum <= G.rumMax ANDH.storlek >= G.storlekMin AND H.storlek <= G.storlekMax AND(G.hyraMax = 0" & " OR H.hyra <= G.hyraMax) AND(G.balkong = '" & "" & "' OR H.balkong = G.balkong) AND(G.badkar = '" & "" & "' OR H.badkar = G.badkar) AND(G.bredband = '" & "" & "' OR H.bredband = G.bredband) AND(G.spis = '" & "" & "' OR H.spis = G.spis) AND(G.brf = '" & "" & "' OR H.brf = G.brf) ANDH.postNr IN (select postNr from ONSKEMAL08 where loId=G.loId) ANDF.rum >= E.rumMin AND F.rum <= E.rumMax ANDF.storlek >= E.storlekMin AND F.storlek <= E.storlekMax AND(E.hyraMax = 0" & " OR F.hyra <= E.hyraMax) AND(E.balkong = '" & "" & "' OR F.balkong = E.balkong) AND(E.badkar = '" & "" & "' OR F.badkar = E.badkar) AND(E.bredband = '" & "" & "' OR F.bredband = E.bredband) AND(E.hiss = '" & "" & "' OR F.hiss = E.hiss) AND(E.spis = '" & "" & "' OR F.spis = E.spis) AND(E.brf = '" & "" & "' OR F.brf = E.brf) ANDF.postNr IN (select postNr from ONSKEMAL08 where loId=E.loId) ANDA.medlemsNr=D.medlemsNr AND A.medlemsNr=E.medlemsNr ANDB.medlemsNr<>A.medlemsNr AND C.medlemsNr<>A.medlemsNr ANDB.medlemsNr<>C.medlemsNr ANDB.sparr<>1 AND C.sparr<>1 ANDA.typ=11 AND A.medlemsNr=" & session("medlemsNr") & " ANDB.medlemsNr=F.medlemsNr AND B.medlemsNr=G.medlemsNr ANDB.typ=11 AND A.triangel=1 AND B.triangel=1 AND C.triangel=1 AND " &_C.medlemsNr=H.medlemsNr AND C.medlemsNr=I.medlemsNr ANDC.typ=11 group by F.lfId, F.medlemsNr,F.ort,F.gatuadress,F.gatuNr,F.rum,F.storlek,F.hyra
View 9 Replies
View Related
Aug 19, 2005
Hi,I feel stupid for posting this question but I cannot find out how to create an SQL statement to return records that have been added today.My database table has a field called calldate which hold the date and time of the record added to the database i.e. "02/08/2005 16:55:41".Please can someone let me know how I can search to find all records added today. I thought it would be something like it, but I assume I need to format the calldate so it's just 02/08/2005.Select *From TableWhere CallDate = GetDate()ThanksBrett
View 9 Replies
View Related
Sep 8, 2015
I have a query where:
WHERE a.jobdate >=GETDATE()-1
This brings though data from today and yesterday; I understand this is because GETDATE = now.
However, all I want is to see is data from today only.
Is there any way the above query can be amended - probably not using GETDATE - so I can achieve this?
View 3 Replies
View Related
Feb 7, 2005
I have a query that is behaving a little a weird. here is the example:
i have 1 table in this table i have 2 columns wich are date and time
DATE_DEBUT_PERIODE_FISCALE DATE_FIN_PERIODE_FISCALE
------------------------------ ---------------------------
1/27/1997 2/27/1997
1/1/2005 2/6/2005
here is my query:
BEGIN
declare @datefin_flag datetime, @strip datetime
SELECT @strip = dateadd(d,datediff(d,0,getdate()),0)
SELECT @datefin_flag = DATE_FIN_PERIODE_FISCALE FROM DM_LKP_CALENDRIER_PERIODE_F
WHERE DATE_DEBUT_PERIODE_FISCALE < @strip AND DATE_FIN_PERIODE_FISCALE = @strip
--select @datefin_flag
--select @strip
IF(@datefin_flag != @strip)
RAISERROR('You cant run this',16,1)
END
Well this Query should return the raiserror it returns completes successfuly
since todays date is not the same as the date in the database.
if you select @datefin_flag it returns NULL and if you select @strip it brings back todays date how can NULL be equal to to todays date assuming that todays date is equal to NULL. ?
View 7 Replies
View Related
Aug 27, 2015
Here is my query
SELECT id, (CONVERT(datetime, event_date)) AS event_date, xmlfilename, event_active FROM test WHERE (YEAR(event_date) >= YEAR(GETDATE())) AND (MONTH(event_date) >= MONTH(GETDATE())) AND (DAY(event_date) >= DAY(GETDATE())) ORDER BY event_date ASC
The above query shows me event only upcoming event from the current month.
I want to list all the events happening today and future. I do not want to show past event. How to do this?
View 4 Replies
View Related
Apr 25, 2008
Hello to all,
if have a problem with a SELECT query that works very fine on SQL Server 2000 but not on 2005. I've transfered my db by creating a full backup and restoring the db on 2005. The db is working except this problem.
When i start executing it doesn't finish. I waited a couple of minutes. On 2000 it only takes about 6 seconds to run.
Here it is:
Code Snippet
SELECT * FROM PPS_TERMbesttmpwhere PPS_TermBestTmp.BestNr + CONVERT(varchar(30),CAST(REPLACE(PPS_TermBestTmp.Pos1, ',', '.') AS float),2)
NOT IN (SELECT PPS_TermBest.BestNr + CONVERT(varchar(30), PPS_TermBest.Pos1,2) FROM PPS_TermBest)
Any ideas?
Thanx
Alex
View 7 Replies
View Related
Feb 23, 2004
I have events which require certain things be done several days before the event and things be done several days after the event. I attempted to use the DATEADD function to subtract 3 days from the event date. The SQL Statement I created did just that, but, it displays 3 days back from today's date.
There are 2 tables:
CalendarCategories -- Table
CalCategoryID -- int field
CalCategoryName -- varchar field
CalendarEvents -- Table
CalCategoryID -- int Field
Title -- varchar Field
StartDate -- DateTime Field
I have to perform some tasks 3 days before the event. So, TODAY, I want to see a listing of those events which are scheduled for 3 days FROM NOW.
This is my current SQL Statement:
SELECT DATEADD(d,-3,StartDate) AS [Update Payoffs & Ins], Title AS [Closing Description] FROM CalendarEvents WHERE datepart(dd,StartDate)=datepart(dd,getdate()) AND datepart(mm,StartDate)=datepart(mm,getdate())
This SQL Statement takes TODAY'S events and gives them a date of February 20. See example of the results at http://www.joelwilliamslaw.com/DesktopDefault.aspx?tabid=141
This is what I have already done relative to my calendar listings:
Specific Event Types for the Current Month :
SELECT StartDate AS [Date and Time], CalCategoryName AS [Cls Type], Title AS [Closing Description] FROM CalendarEvents inner join CalendarCategories
on CalendarEvents.CalCategoryID = CalendarCategories.CalCategoryID
where (CalendarEvents.CalCategoryID = 1 OR CalendarEvents.CalCategoryID = 2 OR CalendarEvents.CalCategoryID = 3 OR CalendarEvents.CalCategoryID = 4 OR CalendarEvents.CalCategoryID = 20) AND (datepart(mm,StartDate)=datepart(mm,getdate()) AND datepart(yy,StartDate)=datepart(yy,getdate())) AND CalendarEvents.ModuleID = 360 ORDER BY StartDate ASC
Specific Event Types for the Current Day:
SELECT StartDate AS [Date and Time], CalCategoryName AS [Cls Type], Title AS [Closing Description] FROM CalendarEvents inner join CalendarCategories
on CalendarEvents.CalCategoryID = CalendarCategories.CalCategoryID
where (CalendarEvents.CalCategoryID = 1 OR CalendarEvents.CalCategoryID = 2 OR CalendarEvents.CalCategoryID = 3 OR CalendarEvents.CalCategoryID = 4 OR CalendarEvents.CalCategoryID = 20) AND (datepart(dd,StartDate)=datepart(dd,getdate()) AND datepart(mm,StartDate)=datepart(mm,getdate()) AND datepart(yy,StartDate)=datepart(yy,getdate())) AND CalendarEvents.ModuleID = 360 ORDER BY StartDate ASC
Your assistaince is much appreciated.
Joel
View 6 Replies
View Related
Mar 31, 2004
hi all
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin
declare @current_date datetime
set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc
end
View 1 Replies
View Related
Jul 21, 2015
I am able to select the average, max, etc of the variable in a simple select statement but when I do the following, it doesn't work. The reason I am doing the following is because I am calculating the average and such over a 5 min interval, then saving the output as one line. That is why I condense average, max, min, and stdev into one variable which I then output. why it won't run when I have it like this but will run when it is like this?
will run:
SELECT AVG(NacTemp), MAX(NacTemp),MIN(NacTemp), STDEV(NacTemp)
FROM [DATABASE]
WHERE [UTCDeviceTimeStamp] between DATEADD(minute, -5, GETUTCDATE()) and GETUTCDATE()
won't run but I need it to:
DECLARE @now datetime SET @now = GETUTCDATE() --Universal Time
DECLARE @timeint int SET @timeint = '5' --time interval in minutes
DECLARE @time datetimeSET @time = (SELECT MIN([UTCDeviceTimeStamp]) FROM [DATABASE] WHERE [UTCDeviceTimeStamp] BETWEEN DATEADD(minute, -@timeint,@now) AND @now) -- Timestamp data will be saved as
DECLARE @comma varchar(4) SET @comma = ', '
[Code] ....
View 9 Replies
View Related
Nov 14, 2007
Hi,
I have a query which used to run fine on a rubbish SQL 2000 box in about a minute, but with SQL 2005 (SP2) it never finishes, even when left overnight. No errors in the logs or anything. It is the same database which was backed up from SQL 2000 and restored into 2005. Does anybody have any ideas?
Cheers
Steve
SELECT DISTINCT R1.RowVersionId, R2.EnumID AS A, R2.EnumID AS B, R4.EnumID AS C, R6.EnumID AS D, R8.EnumID AS E, R10.EnumID AS F, R12.EnumID AS G, R14.EnumID AS H
FROM
RowRuns AS R1
INNER JOIN XRunConfigEnum AS R2 ON R1.RunVersionID = R2.RunVersionId
INNER JOIN RowRuns AS R3 ON R1.RowVersionId=R3.RowVersionId
INNER JOIN XRunConfigEnum AS R4 ON R3.RunVersionID = R4.RunVersionId
INNER JOIN RowRuns AS R5 ON R1.RowVersionId=R5.RowVersionId
INNER JOIN XRunConfigEnum AS R6 ON R5.RunVersionID = R6.RunVersionId
INNER JOIN RowRuns AS R7 ON R1.RowVersionId=R7.RowVersionId
INNER JOIN XRunConfigEnum AS R8 ON R7.RunVersionID = R8.RunVersionId
INNER JOIN RowRuns AS R9 ON R1.RowVersionId=R9.RowVersionId
INNER JOIN XRunConfigEnum AS R10 ON R9.RunVersionID = R10.RunVersionId
INNER JOIN RowRuns AS R11 ON R1.RowVersionId=R11.RowVersionId
INNER JOIN XRunConfigEnum AS R12 ON R11.RunVersionID = R12.RunVersionId
INNER JOIN RowRuns AS R13 ON R1.RowVersionId=R13.RowVersionId
INNER JOIN XRunConfigEnum AS R14 ON R13.RunVersionID = R14.RunVersionId
WHERE
((R2.ParamID='ee72510e-3bab-49f6-1ff9-4d09cbe8670a' AND (R2.EnumID = '1a2868fb-72ef-e1d3-e79d-fbb5814ab481')))
AND
((R4.ParamID='7aadb3a4-3d13-8e0d-bfa4-4243ed1fdb35' AND (R4.EnumID = '745fb00c-0b16-7b4e-bf8f-da0f46777ca0')))
AND
((R6.ParamID='8c9aee3a-df1f-6ec5-131a-8fa0309ce1ff' AND (R6.EnumID = 'c7af1456-56bc-ba9c-f1e4-95cfd5542d10')))
AND
((R8.ParamID='61a714fa-8b20-1e7e-1adb-c680f72ddf0d'))
AND
((R10.ParamID='d9f0645c-e1be-b5c2-906f-ff3c5b9de0df'))
AND
((R12.ParamID='1916773f-1bf9-eea5-e702-5f293b3047a2'))
AND
((R14.ParamID='c37d4377-f6dd-69bc-16ef-bd06c76f400e'))
View 14 Replies
View Related
Mar 28, 2008
I have created a lot of reports using this technique, but this is the first one that doesn't work. As there is absolutely nothing special about it, I can't figure out what the issue is.
I have one dataset that uses parameters chosen from two other dataset results. One dataset result runs just fine and returns values in reporting services, but the other returns blank in reporting services. In Visual Studio, both datasets return data.
I cannot for the life of me figure out what I've done that gives this result as I've never encountered it before and use this method of parametization quite frequently.
The dataset in question doesn't even join any tables, it's a direct select distinct field"1" from table"a".
I'm running SQL2005, SP2.
Thanks for any advice.
Margaret
View 6 Replies
View Related
May 11, 2007
We are running MS RS and SQL Server 2000 SP3.
We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.
Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).
If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.
This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....
What is this. ....is it our QUERY, index or huge Transactions or no free space ???
We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?
Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????
Thanks,
View 3 Replies
View Related
Mar 28, 2008
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.
I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.
/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.
I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.
One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.
Stacy
View 5 Replies
View Related
Nov 3, 2006
Can someone tell me sql query for filtering date field for current day,not last 24hours but from 00:00 to current time?
View 2 Replies
View Related
Apr 16, 2015
Using a 32-Bit SQL Server 2008 Express on my LOCAL PC. I downloaded the Advantage 8.1 OLE DB Provider and created a linked server to a REMOTE Advantage 8.1 database server. There is no data dictionary on the Advantage server.
Here is my linked server:
EXEC master.dbo.sp_addlinkedserver @server = N'1xx.1xx.xx.1xx', @srvproduct=N'Advantage', @provider=N'Advantage OLE DB Provider', @datasrc=N'1xx.1xx.xx.1xxeccET', @provstr=N'servertype=ads_local_server;tabletype=ads_cdx;'--tabletype=’ADS_ADT’ (this test works too)
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'1xx.1xx.xx.1xx',@useself=N'False',@locallogin=Null,@rmtuser='adssys',@rmtpassword=Null
Testing the link succeeds with above. Using “ads_REMOTE_server” instead of “ads_local_server” and the test fails. Here is my problem, using the following queries will not work. Perhaps it’s a permissions issue? When I specify my local credentials for the remote server in the linked server it still does not work.
SELECT * FROM OPENQUERY([1xx.1xx.xx.1xx], 'SELECT * FROM ActType')
OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx" returned message "Error 7200: AQE Error: State = HY000; NativeError = 5004; [Extended Systems][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. Table name: ActType SELECT * FROM ActType".
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT * FROM ActType" for execution against OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx".
View 0 Replies
View Related
Sep 12, 2005
I am trying to specify a SELECT statement to only capture yesterdays data.
The best i can come up with is
SELECT *
from applytracking
where hitDate = (CAST(STR(MONTH(@Date))+'/'+STR(-1)+'/'+STR(YEAR(@Date)) AS DateTime))
But its not right, can anyone set me on the right path?
Thanks for any help
View 7 Replies
View Related
May 25, 2007
how do i get yesterdays records only?
View 20 Replies
View Related
Jan 5, 2008
Please can anyone tell me How to calculate the time period from 1st of current month to yesterday?
Thanks
View 13 Replies
View Related
Sep 10, 2007
How do i get only the data for the last date in the query. I just want the most current date. Which is yesterdays information. But on monday, its fridays information. So is there a code for getting the most Current Data. If not whats the code for getting the last business day such as friday for today. But for tommorow it will be monday. My time_log field has the date converted into mm-dd-yyyy. Any help?
Code Snippet
ALTER PROCEDURE [dbo].[Testing_Visits_6_Daily]
(@Region_Key int=null)
AS
BEGIN
SELECT dbo.Qry_Visits.Status,
dbo.Qry_Visits.Customer_code,
Qry_Sales_Group.Name,
dbo.Qry_Sales_Group.SR_Name,
dbo.Qry_Date_Dim.Date_Dimension_Fiscal_Week,
dbo.Qry_Date_Dim.Date_Dimension_Date,
dbo.Qry_Date_Dim.Day_Of_Month,
dbo.Qry_Sales_Group.Region,
dbo.Qry_Visits.period_code,
dbo.Qry_Visits.cycle_day, dbo.Qry_Visits.Visits,
dbo.Qry_Visits.time_log, dbo.Qry_Visits.Mailing_Name,
dbo.Qry_Date_Dim.Date_Dimension_Year,
dbo.Qry_Date_Dim.Date_Dimension_Period,
CONVERT(varchar, dbo.Qry_Visits.time_log, 110) AS Date,
dbo.Qry_Sales_Group.Region_Key, dbo.Qry_Visits.[SR Code],
B.VisitsTotal
FROM dbo.Qry_Visits
INNER JOIN dbo.Qry_Sales_Group
ON dbo.Qry_Visits.[SR Code]
COLLATE SQL_Latin1_General_CP1_CI_AS = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
AND dbo.Qry_Visits.[SR Code] = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
COLLATE Latin1_General_CI_AS
INNER JOIN dbo.Qry_Date_Dim
ON CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110) = CONVERT(varchar, dbo.Qry_Visits.time_log, 110)
INNER JOIN ( Select COUNT(Visits)as VisitsTotal,[Sales Responsible],CONVERT(VARCHAR,(Qry_Visits.time_log),110)TheDate,Qry_Visits.Status
FROM dbo.Qry_Visits
WHERE Qry_Visits.Status=2
GROUP by [Sales Responsible] , CONVERT(VARCHAR,(Qry_Visits.time_log),110),Qry_Visits.Status
HAVING SUM(Visits) < 6)B
ON dbo.Qry_Sales_Group.SR_Name COLLATE Latin1_General_CI_AS = B.[Sales Responsible] COLLATE Latin1_General_CI_AS AND
CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110) = B.TheDate
WHERE REGION_KEY=@Region_Key and Qry_Visits.Status=2 and CONVERT(varchar, dbo.Qry_Visits.time_log, 110)=GETDATE()
ORDER BY dbo.Qry_Sales_Group.SR_Name, CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110)
END
SET NOCOUNT OFF
View 5 Replies
View Related
Jan 26, 2006
I am trying to get the yesterday's date without the time, eg "1/25/2006 " but I will get "2006-01-25 17:10:21.403" instead. Can somebody tell me the sql for it? currently I am using :
CONVERT(DATETIME, DATEADD(day, -1, GETDATE()), 101))
View 5 Replies
View Related
Jun 25, 2001
In search of SQL to obtain "yesterday's" begin/end times for a batch process:
GETDATE() needs to be converted to Yesterdays FIRST and LAST second:
------- --------------------------------
2001-06-25 14:23:56.054 ---> 2001-06-24 00:00:00.001 (1st sec. of yesterday)
2001-06-25 14:23:56.054 ---> 2001-06-24 23:59:59.999 (last sec. of yesterday)
Will CAST and/or CONVERT fucntions assist? The follwoing SQL returns GETDATE()-1 (yesterday along w/ a time) I need the time converted to 1st and last second...
declare @date_time_accessed datetime,
@DateAccessed varchar(80),
@TimeAccessed varchar(80)
select convert(varchar(10),getdate()-1,120) as dateaccessed,
convert(varchar(8),getdate()-1,114) as timeaccessed
View 3 Replies
View Related
Feb 2, 2008
Hello there,Im not quiet sure this is the right forum, but what the...I got a database with eg. dates in..(Day-Month-Year)01-02-200802-02-2008 <-- Today03-02-2008
Then i want to find the date for yesterday, in this example 01-02-2008, and delete the record.. - How is this done?Hope you understand and can help me,Regards Jeppe Richardt
View 2 Replies
View Related
