I'm using VS2005 and trying to save my very simple stored procedure.
The error message "Invalid object name 'dbo.xxxxx' just pop's up.
The SP is written through the Server Explorer > Stored Procedures > Add new.... etc.
Using SQL server 2000.
Don't think this has to do with the SP-code but here it is:
ALTER PROCEDURE dbo.KontrollUnikPersNr
@PersNr nvarchar(50) = null OUTPUT
AS
SELECT @PersNr = PersNr FROM User WHERE PersNr = @PersNr
RETURN @@ROWCOUNT
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
I have an SSIS package that I created that looks like the following:
Execute SQL Task [Determines the file name]
Data Flow Task Source - Query [Grabs the data] Destination [Saves data to file on network drive]
Send Mail Task [Tells user to get file from network] When I run this package inside Microsoft Visual Studio I get the results I want. It sends the file to the network drive and because there are SSN's in the file, it doesn't actually e-mail the file but puts it in a secure location for the person to get the file.
When I schedule this in SQL Server 2005 I get the file saved to: c:windowssystem32dynamicfilename.csv
So somehow it is still able to determine what the file name should be, but instead of sending the file to the right destination when you run it through VS, it flops out and sends it to this wacky directory.
I've spent too much time on this and was wondering if someone can point me in the right direction without going to the extent of writing a script like this suggests. thread1555-1265108
In Microsoft SQL Server Management Studio Express you can right click on "Stored Procedures" under a database in the object explorer and the resulting Context Menu offers a selection called "New Stored Procedure".
If you select "New Stored Procedure", a Stored Procedure Template Document is added for editing. It has the suffix ".sql"; I can save this document to the file system after I edit it, but I cannot figure out how to add it to the database as a Stored Procedure.
I am running Sql Server 2005, When I create a new stored procedure and try to save it, I'm prompted with the 'save file as dialog'. Is'nt the stored procedure suppose to be saved within the database?
Hi, I have created a store procedure and want to save them. this is wha ti did.
I clicked on the Northwind--> Programm--> Stored Procedure-- > right clicked --> new stored procedure after writing my stored procedure I saved it. But when I am saving I want to save it under the Stored Procedure folder of the NorthWind database. I guess this is what it should do. When I use to use the sql 2000, i could always send my stored procedure here , i guess it was by default. But even if i save my sql stored procedure at any other location than at the run time, how the applicaiton will find my store procedure.
Well so thinking of that I have to save my stored procedure under the database for which table it is created however, i can not save it there. I tried to figure out the directly but I couldnt.
I couldn't debug SQL Server by "Step into Stored Procedure" on Server Explorer of VS2008 (or VS2005) to SQL 2005 Developer on remote Windows Server 2003 machine, it allway issue exception "Unable to start T-SQL Debugging. Could not attach to SQL Server process on 'Server'. Click Help for more information"
1) The environment: The Client: Windows XP SP2 (WORKGROUP) Visual Studio 2008 (or VS2005)
The SQL Server Machine: Windows 2003 Server Sp1 (DOMAIN) SQL Server 2005 Developer
2) User account and Permission login: I create the same user account for both Client and Domain Server with the same password, i also add that user to "Administrators" group in both machine.
At the SQL Server on Server machine, i added that account to ServerSecurityLogin with 'sysadmin' role already
3) Connection and authentication: I used "Windows Authentication" for my connection to SQL server, and i checked sure my account of the connection by SQL command
SELECT SYSTEM_USER, IS_SRVROLEMEMBER ('sysadmin')
4) Firewall: I checked firewall like MSDN helping (i also tried to test by turn off firewall in both machine)
5) Visual Studio Remote Debugger: I read "How to: Enable SQL Server 2005 Debugging" on MSDN with comment "The SQL Server can run on the same machine as the application or on a remote machine. If you are debugging T-SQL code only, then no remote setup is required." so i didn't config Visual Studio Remote Debugger any thing.
Note: If i "Step Into Store Procedure" at Server locally, it works okey, so on at my PC client locally. But if i move debugging from my client to my Server, it occur error "Unable to start T-SQL Debugging. Could not attach to SQL Server process on 'Server'. Click Help for more information"???
If i execute store procedure on Server Explore, it works okey!
Hi, i can make and save a stored procedure in Visual Web Developer (via Database Explorer). It appears then in the list op stored procedure in Management Sudio. But how to do the same in Management Studio? When i make a sp and i want to save it, Management Studio asks me a name, but put the file in a Projects directory in 'My documents'. It never appears in the list of sp. Thanks tartuffe
Hi, Recently, I started to move more databases from SQL Server 2000 to 2005, well the Stored Procedures in 2005 is hard to handle.
First of all, I created the new SP in Object Explorer, the "New Stored Procedure" query just created a new name under the Stored Procedures folder, then I have to re-open it to put in TSQL code.
After I put in the code in the new SP, if I click "Save", the File Manager comes out to let me to save in a physical location (C: or D: or Network place...). But after I close and open the new SP, the code I put in there is not really in the new SP.
I know that I have to "Execute" the SP in order to save the change. But the problem is I don't want to run the code at this step, the SP is to get a lot of data transactions, I'll setup a "Job" to do this.
So, the question is: Is this the way to create and save a new SP? Is there any other way to save the code changes in the SP WITHOUT "Execute" it?
Please give me any advise, article or links to read.
I am trying to save an uploaded image and its associated info to sql server database using a stored procedure but keep getting trouble. When trying to save, the RowAffected always return -1. but when i debug it, I dont' see problem both from stored procedure server explore and codebehind. it looks to me every input param contains correct value(such as the uploaded image file name, contentType and etc). well, for the imgbin its input param value returns something like "byte[] imgbin={Length=516}". Below is my code, could anyone help to point out what did I do wrong? Thank you.
We are collecting values in a string format with delimeteres and sending to DB .We would like to insert the data in Bulk insert format rather than splitting the same and then inserting..
In sql 2014 can we archive the same..sample format currently we are getting the client is like this is
Saleid$ salename$month$year$totalsale#Saleid$salename$month$year$totalsale# has a dataset.
I have successfully created CLR stored procures using c# and SQL Server 2005. Now I want to use the CLR stored procedures with some ASP.NET controls. I can add the CLR stored procedure to the dataset designer and have it add a new table adapter but it does not list the columns in the designer view. This forces me to code the column references manually into the controls (tried: DropDownList, GridView).
I can deal with adding the columns manually for controls using a CLR stored procedure, but I want to make sure I was not missing something, am I?
BTW: TSQL stored procedures work as expected (show columns in the dataset designer)
I have searched many forums and found some cases of people also reporting slower rendering in RS than in Management Studio / Query Analyzer. However, none of the other solution suggestions seem to make a difference for me.
I'm a VS/VB developer and have got multiple reports built -- all using stored procedures on the backend -- that all take many times longer to run than if executed via Management Studio (SSMS). My simplest proc takes a couple of parameters (no defaults included) and does a simple select against one table with a few joins. Nothing complicated. It runs in 8 secs for 6867 rows via SSMS. Through RS (running locally through Visual Studio 2005 at this point) it takes around 25-28 secs. Yet, when I'm in the report on the DATA tab (not the PREVIEW tab) the run takes the expected 8 secs ?!?!
All reports are behaving this way.
I am not using cursors. I have no default values on parameters. I have added the "WITH RECOMPILE" to the proc statement. I have "SET NOCOUNT ON" as the first line of the proc. I hate to say this, but I even connected the proc to Crystal Reports to see how it behaved. It ran in the expected 8 secs.
I've seen some mention by someone that perhaps this is a known issue of RS that it reads the proc twice. Any truth to this?
Also a couple posts have traced and demonstrated that the report is generating significantly more data "reads" via RS than through SSMS.
We're a shop that is considering a switch from Crystal to RS, but we do everything through stored procedures. I need to clear up this issue before I can go forward recommending a switch. I'm including a copy of a typical proc below for review... What am I missing? What's the deal here with RS?
IF OBJECT_ID('dbo.rpt_InactiveAccounts') IS NOT NULL
DROP PROCEDURE dbo.rpt_InactiveAccounts
GO
CREATE PROCEDURE dbo.rpt_InactiveAccounts
(@pRunDate datetime
,@pSalesperson varchar(5000)
,@pIncludeOpen char(1)
)
WITH RECOMPILE
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
-- CREATE/SETUP TEMP TABLE FOR USE IN PARSING MULTI-VALUED STRING INPUTS
DECLARE @NumberPivot TABLE (NumberID INT PRIMARY KEY)
DECLARE @intLoopCounter INT
SELECT @intLoopCounter =0
WHILE @intLoopCounter <=4999 BEGIN
INSERT INTO @NumberPivot
VALUES (@intLoopCounter)
SELECT @intLoopCounter = @intLoopCounter +1
END
-- CREATE TEMP TABLES TO HOLD PARSED VALUES FROM MULTI-VALUE STRING INPUT PARAMETERS
DECLARE @SalespersonTable TABLE
(tmpSalesperson varchar(30))
-- PARSE OUT @pSALESPERSON PARAMETER AND STORE VALUES IN TEMP TABLE
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I was trying to save the Stored Procedures; however, SQL Server would not save it and gave me the "Error 259: (SQL Server) Ad-hoc updates to system catalogs not enabled. System Administrator must reconfigure system to allow this."
Does anyone know what to do with this error? I went search the error in the Microsoft TechNet Website and did not get any resolution.
In SQL Server 2000 when we use to create a new procedure it was saved in Management Consule, but when I create a new procedure and wants to save it SQL Server 2005 (Management Console) ... it saved like a query on my local drive ... I am confused what to do ... if i save it on local drive then how can i call it when required.
When I create/alter a store procedure in SQL Server 2005, SQL server always checks for syntax errors first and won't let me save the change if it detects any error. Is there a way we can force the SQL server to save the store procedure that fails the syntax check?
I know SQL server will allow such invalid store procedures if you detach & re-attach the entire database from one SQL server to another server. However, if I try to manually create the same store procedure from one server on a different server with a script, then it won€™t let you save the store procedure if the linked server (or the table) can€™t be accessed from the new sql server.
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Is there a way to run query, make file out of query (txt,csv or xls -for example) and save it as a blob into the table column typeImage/Text?Any thoughts would be greatly appreciated.Thanks!
I have visual web developer and sqlexpress 2005 installed on my windows XP pro.
I am creating stored procedures through VWD and works fine for me. However today I realize I do not know how to create stored procedures through sqlexpress server managment.
When I try it it wants to save it as file. And if I do that I am not able to see them until manually open each .sql file.
Hello:I didn't find any documentation that notes save point names are casesensitive, but I guess they are...Stored Proc to reproduce:/* START CODE SNIPPET */If Exists (Select * From sysobjects Where Type = 'P' and Name ='TestSaveTran')Drop Procedure dbo.TestSaveTranGoCreate Procedure dbo.TestSaveTranAsBeginDeclare@tranCount int--Transaction HandlingSelect @tranCount = @@TRANCOUNTIf (@tranCount=0)Begin Tran localtranElseSave Tran localtranBegin Try--Simulate Error While ProcessingRAISERROR('Something bad happened', 16, 1)/*If this proc started transaction then commit it,otherwise return and let caller handle transaction*/IF (@tranCount=0)Commit Tran localtranEnd TryBegin Catch--Rollback to save pointRollback Tran LOCALTRAN --<< NOTE case change--Log Error--Reraise ErrorEnd CatchEndGo--Execute Stored ProcExec dbo.TestSaveTran/*Should receive the following message:Cannot roll back LOCALTRAN. No transaction or savepoint of that namewas found.*//* END CODE SNIPPET */What is really strange, if there is a transaction open, then no erroris thrown. So if you execute as so:/* START CODE SNIPPET */Begin Tran--Execute Stored ProcExec dbo.TestSaveTran/* END CODE SNIPPET */There is no "Cannot roll back LOCALTRAN...." message.Questions:1-)Can someone confirm save point names are case sensitve and this isnot happening because of a server setting?2-)Is this a logic error that I am not seeing in the example codeabove?We have changed our code to store the save point name in a variable,which will hopefully mitigate this "problem".Thx.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I am new to sql sever management studio express, but a long time query analyzer user. This is a very basic question.
I want to change the default directory in sql server management studio express so that when I go to save a query, it is already pointed to the correct one. Where do I change that?
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END. Any help on this would be appreciated.