Can't Update A Record Using A DetailsView And SqlDataSource
Feb 13, 2007
Hi,
I'm trying to create a registration page that I've divided into multiple pages (first page for basic details, next page for address, etc.). I insert the record in the first page, and update it in the other pages. I pass the newly created ID to the other pages using the Page.PreviousPage property.
In the second page, I have the SqlDataSource configured as "SELECT * FROM [Table] WHERE ID = ?", and the UpdateCommand is "UPDATE .... WHERE ID = ?".
In Page_Load, I am updating the SelectCommand to "SELECT ... WHERE ID = " & intID, and the UpdateCommand similarly. The I do a dtlsvw.Databind()
But when I go to the next page (the newly created ID is being passed properly), the update doesn't do anything. The new record doesn't contain the values in the detailsview. Can somebody help me out?
Thanks,
Wild Thing
View 2 Replies
ADVERTISEMENT
Mar 6, 2006
Hi
I have a Page with a DetailsView and SqlDataSource. When Editing the DetailsView the Sql;DataSource UpdateCommand does not seem to pick up the @parameters of the form fields. I have used OnItemUpdating to view all Keys/OldValues/NewValues passed into the UpdateCommand but nothing seems to be picked up.
When I place a value into UpdateCommand it updates correctly but does not when I use the form. At this stage I have simplified the code down to typical Master-Details Pages (Separate) using a QueryString to filter the SelectCommand. But nothing seems to work.
Please help! I have wasted so much time trying to resolve this and I am on deadline and need this to work.
Thanks
Dave
View 3 Replies
View Related
Jul 30, 2007
For some reason I can't make the stars align. Could someone spot the problem here? I'm looking to select the Identity of my last inserted record in the code behind my DetailsView. Here are the relavent bits:
Stored Procedure:ALTER PROCEDURE usp_EW_INSERTMajor
@StartDate datetime, @Finishdate datetime, @ProjectName nvarchar(1000), @WorkCell nvarchar(1000),
@JobName nvarchar(1000), @PartName nvarchar(1000), @StatusID int, @ResponsibleID int, @FacilityID int
AS
Set nocount on
DECLARE @ProjectID int
/*This saves the bits to the Project table*/
INSERT INTO EW_Project (ProjectTypeID,FacilityID,StartDate,FinishDate,Status,EmployeeID)
VALUES(1,@FacilityID,@StartDate,@FinishDate,@StatusID,@ResponsibleID)
/*This saves the bits to the Major table*/
SET @ProjectID = SCOPE_IDENTITY()
INSERT INTO EW_MajorBasic(ProjectID,ProjectName,WorkCell,JobName,PartName)
VALUES (@ProjectID,@Projectname,@WorkCell,@JobName,@PartName)
Set nocount off
SELECT @ProjectID as ProjectID
SQLDataSource<asp:SqlDataSource ID="ProjectData" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>"
SelectCommand="usp_EW_GETMajorBasic"
SelectCommandType="StoredProcedure"
UpdateCommand="usp_EW_UPDATEMajorBasic"
InsertCommand="usp_EW_INSERTMajor"
InsertCommandType="StoredProcedure"
UpdateCommandType="StoredProcedure"
DeleteCommand="DELETE FROM EW_Project WHERE ProjectID = @ProjectID"
>
<UpdateParameters>
<asp:Parameter Name="ProjectID" Type="Int32" />
<asp:Parameter Name="StartDate" Type="DateTime" />
<asp:Parameter Name="Finishdate" Type="DateTime" />
<asp:Parameter Name="ProjectName" Type="String" />
<asp:Parameter Name="WorkCell" Type="String" />
<asp:Parameter Name="JobName" Type="String" />
<asp:Parameter Name="PartName" Type="String" />
<asp:Parameter Name="StatusID" Type="Int32" />
<asp:Parameter Name="ResponsibleID" Type="Int32" />
<asp:CookieParameter CookieName="EW_FacilityID" Name="FacilityID" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="StartDate" Type="DateTime" />
<asp:Parameter Name="Finishdate" Type="DateTime" />
<asp:Parameter Name="ProjectName" Type="String" />
<asp:Parameter Name="WorkCell" Type="String" />
<asp:Parameter Name="JobName" Type="String" />
<asp:Parameter Name="PartName" Type="String" />
<asp:Parameter Name="StatusID" Type="Int32" />
<asp:Parameter Name="ResponsibleID" Type="Int32" />
<asp:CookieParameter CookieName="EW_FacilityID" Name="FacilityID" />
</InsertParameters>
<SelectParameters>
<asp:Parameter Name="ProjectID" Type="Int32" />
</SelectParameters>
<DeleteParameters>
<asp:Parameter Name="ProjectID" />
</DeleteParameters>
</asp:SqlDataSource>
DetailsView<asp:DetailsView
ID="DetailsView1"
runat="server"
AutoGenerateRows="False"
DataKeyNames="ProjectID"
DataSourceID="ProjectData"
SkinID="SimpleDetailsView"
OnItemDeleted="ProjectData_Deleted"
OnItemInserted="DetailsView1_ItemInserted">
Code-Behind: Sub DetailsView1_ItemInserted(ByVal sender As Object, ByVal e As DetailsViewInsertedEventArgs) Handles DetailsView1.ItemInserted
Dim newID As Integer = e.Values("ProjectID")
testlabel.Text = newID
End Sub
To be clear, everything is working. When I come to this page with an ID, the records display fine (Select works). The Update and Delete work just fine. The Insert works fine too. It's just that the ItemInserted part does not want to grab the ProjectID. Specifically, testlabel displays a Zero.
View 2 Replies
View Related
Oct 16, 2006
Hi,I have an updatable DataGrid linked to a SQLDataSource in a web site developed using VS2005. Update works fine unless a value in the existing row is Null. Only one column in the database allows nulls.Putting a debug stop in the SqlDataSource1_Updating event, I checked the parameter value in the Immediate window and got the following result:?e.Command.Parameters(16){System.Data.SqlClient.SqlParameter}System.Data.SqlClient.SqlParameter: {System.Data.SqlClient.SqlParameter}DbType: Int32 {11}Direction: Input {1}IsNullable: FalseParameterName: "@original_FiresolveJobNo"Size: 0SourceColumn: ""SourceColumnNullMapping: FalseSourceVersion: Current {512}Value: NothingIs there a property I can set to generate a suitable Null check clause for the Update statement?Many Thanks,Keith.
View 3 Replies
View Related
Aug 25, 2006
I have null values in some of the fields & when I use EDIT to make changes these changes are not recorded + I receive no error.
View 1 Replies
View Related
Dec 18, 2007
Hi,I am using detailsview to update my database and got a question regarding datetime format. Here is part of my code:
<asp:TemplateField HeaderText="Project Deadline">
<EditItemTemplate>
<asp:TextBox ID="txtDeadline_edit" runat="server" Text='<%# Bind("pro_app_deadline") %>'></asp:TextBox>
<asp:CompareValidator ID="txtDeadlineedit_validator" runat="server" ErrorMessage="Not a valid date format" ControlToValidate="txtDeadline_edit" Operator="DataTypeCheck" Type="Date"></asp:CompareValidator>
</EditItemTemplate>
<ItemTemplate><asp:Label ID="txtDeadline" runat="server" Text='<%# Eval("pro_app_deadline") %>'></asp:Label>
</ItemTemplate></asp:TemplateField>
Since the format of my parameter 'pro_app_deadline' is datetime, it get stored as YYYY-MM-DD hh:mm:ss in datebase. If I want to validate user's input like above way, it always fails since hh:mm:ss append to YYYY-MM-DD. My question is, is there some way I can avoid hh:mm:ss?
Thanks a lot!
View 2 Replies
View Related
Jun 9, 2007
Hi everybody,I have a little Problem with an update and Detailsview.I have 2 table (tblUser - uid,uName,rId) and (tblRole - rId, rDescription) In my update I don't want to use the roles id, I want to use the roles Description.Via sql I do a update the role to Admin like that UPDATE tblUser
SET rId =
(SELECT rId
FROM dbo.tblRoles
WHERE (rDescription = 'Admin')) But I don't get it to work for the detailsview update
View 4 Replies
View Related
Jul 23, 2007
i get Incorrect syntax near 'nvarchar'.Must declare the scalar variable "@BookingID".
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.Must declare the scalar variable "@BookingID".
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Incorrect syntax near 'nvarchar'.Must declare the scalar variable "@BookingID".] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 ...i am using the Edit feature of the detailsview, seems like the datatype is wrong? ID are int (in my DB, BookingID is int), and also its readonly it should not be updating in the first place right? --------------------------------Any way to debug whats in "new" values? ItemUpdating? how to do it?
View 3 Replies
View Related
Jun 9, 2008
Hi,
Can anyone tell me why my Update attempts are not working? Here is my code:
<body>
<form id="form1" runat="server">
<div>
<asp:DetailsView ID="DetailsView1" runat="server" Height="50px" Width="125px"
AutoGenerateEditButton="True" AutoGenerateRows="False" DataSourceID="SqlDataSource1"
DefaultMode="Edit">
<Fields>
<asp:BoundField DataField="City" HeaderText="City" SortExpression="City" />
</Fields>
</asp:DetailsView><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionStringListings %>"
SelectCommand="SELECT [City] FROM [Listings]"
UpdateCommand="UPDATE [Listings] Set [City]=@City WHERE [ListingID]=@ListingGuid ">
<UpdateParameters>
<asp:Parameter Name="City" />
<asp:Parameter Name ="ListingGuid" />
</UpdateParameters>
</asp:SqlDataSource>
<asp:Label ID="Label1" runat="server" Text="Label"></asp:Label>
<asp:Label ID="Label2" runat="server" Text="Label"></asp:Label>
</div></form>
</body>
And here is my code behindProtected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load ListingGuid = Request.QueryString("GUID")
End SubProtected Sub DetailsView1_ItemUpdated(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewUpdatedEventArgs) Handles DetailsView1.ItemUpdated
Label1.Text = "updated"
Label2.Text = ListingGuidEnd Sub
Please let me know what I am doing wrong?
View 3 Replies
View Related
Feb 21, 2008
I am using a stored procedure to update data while in detailsview.I am having a rough time. Dont know why this wont workthanks a lotheres my codeALTER PROCEDURE UpdateCustomerInfo ( @CustomerID as INT, @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @OfficeType as varchar(50) = NULL, @Ext as Int=NULL, @BridgeExt as int=NULL, @Workstation as varchar(50)=NULL, @OldPrinters as varchar(50)=NULL, @NewPrinters as varchar(50)=NULL, @PhoneImg as varchar(50)=NULL, @OfficeImg as varchar(50)=NULL, @Complete as Bit=NULL, @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, @ConfPhone as varchar(50)=NULL, @ConfExt as varchar(50)=NULL, @ReutersDacsId as Varchar(50)=NULL, @Bloomberg as Varchar(50)=NULL, @NewFloor as Int=NULL, @OldFloor as Int=NULL )AS UPDATE CustomerInfo SET LName = @LName, FName = @FName, Dept = @Dept, PhoneType = @PhoneType, Ext = @Ext, BridgeExt = @BridgeExt, Workstation = @Workstation, OldPrinters = @OldPrinters, NewPrinters = @NewPrinters, OfficeImg = @OfficeImg, PhoneImg = @PhoneImg, Complete = @Complete Where CustomerId = @CustomerId UPDATE Extras SET CustomerID = @CustomerID, FaxModel=@FaxModel, FaxNumber=@FaxNumber, ConfPhone=@ConfPhone, ConfExt=@ConfExt, ReutersDacsId=@ReutersDacsId, Bloomberg=@Bloomberg where CustomerID = @CustomerID RETURN
View 2 Replies
View Related
Mar 28, 2008
I have 2 Gridviews and a DetailsView for each GridView. The first Gridview and DetailsView work fine and I can Insert, Delete and Update the DetailsView just fine. However the second Gridview/DetailsView will only let me Insert but not Delete or Update. When I click on the "Delete" button it just ignores me. If I do an "Edit", when I try to click on the "Update" button it is ignored again and I have to click on "Cancel". I don't get any error messages...
Anyone have an idea what might be wrong?
View 4 Replies
View Related
May 10, 2006
I want to update two tables in one page. So I created two FormView bound on two SqlDataSource controls, and I create a Update button on the bottom of page. And I writen some codes as below:
btnUpate_Click(object sender, EventArgs e){
sqlDataSource1.Update();
sqlDateSource2.Update();}
But, the records haven't updated.
In SqlDataSource2_Updating() function, I found all the parameters is null.
So, how to modify my code to do it.
Zhang
View 2 Replies
View Related
Aug 16, 2006
I am trying to update a record in a table based off of criteria of another record in the table.
So suppose I have 2 records
ID owner type
1 5678 past due
2 5678 late
So, I want to update the type field to "collections" only if the previous record for the same record is "past due". Any ideas?
View 5 Replies
View Related
Mar 26, 2008
Hi All,
I am trying to create package something like that..
1- New Customer table as OleDB source component
2- Lookup component - checks customer id with Dimension_Customer table
3- And if same customer exist : I have to update couple fields on Dimension_Customer table
4- if it does not exist then I have insert those records to Dimension_Customer table
I am able to move error output from lookup to Dimension_Customer table using oledb destination
but How can I update the existing ones?
I have tried to use oledb command but somehow it didnt work
my sql was like this : update Dimension_Customer set per_X='Y', per_Y= &Opt(it should come from lookup)
I will be appreciated if you can help me...
View 3 Replies
View Related
Apr 2, 2008
I I have a GridView with paging enabled which is bound to a SqlDataSource. I'd like to be able to tell the user how many records were returned in total by the SqlDataSource. Is there any way to do this without re-running the query?
View 3 Replies
View Related
Feb 16, 2006
Hi,
I would like to know how many records are selected in sqldatasource after select command
Thanks
View 5 Replies
View Related
Feb 21, 2006
I have a table named invoice that contains the following columns-invoiceno - Primary key and is set to autonumber-customerno-incoicedateand on my VB code i did the following InsertCommandSqlDataSource1.InsertCommand = "INSERT INTO invoice(customerno, invoicedate) VALUES('" & Session("UID") & "', GetDate()) "SqlDataSource1.Insert()My Question is how do i get the Primary Key Value it generated during the insert operation(invoice['incoiceno'])? Besides the creationg a stored procedere like the one in the MSDN Library
View 1 Replies
View Related
Jun 19, 2007
Is me again,and now i facing problem to retrieve a single record from the database.
here is my code:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim user As String user = TextBox1.Text Dim varpassword Dim mydata As SqlDataSource
mydata.SelectCommand = "Select * from tbluser where uLogin = '" & user & "'" varpassword = mydata.SelectCommand.uPassword
End SubEnd Class
but i get the error : 'uPassword' is not a member of 'String'
i wan to retrieve the password of that user,can anyone help me?
thanks
View 3 Replies
View Related
Jan 28, 2008
I am using ASP.NET 3.5 with SQLDataSource, when a record is inserted is there a way to retreive the newly created GUID value in a field?
I am currently using SELECT @NewID = SCOPE_IDENTITY() to retreive the newly created record unique ID field, but I need the secondary field GUID field's value instead in this case.
Thank you.
View 7 Replies
View Related
Jan 3, 2005
hi!
I have a big problem. If anyone can help.
I want to retrieve the last update time of database. Whenever any update or delete or insert happend to my database i want to store and retrieve that time.
I know one way is that i have to make a table that will store the datetime field and system trigger / trigger that can update this field record whenever any update insert or deletion occur in database.
But i don't know exactly how to do the coding for this?
Is there any other way to do this?
can DBCC help to retrieve this info?
Please advise me how to do this.
Thanks in advance.
Vaibhav
View 10 Replies
View Related
Sep 6, 2006
I'm new to ASP and ASP.NET so I used the Wizards in Visual Web Deverlopment Express 2005 to build the following code:<asp:DetailsView ID="DetailsView" runat="server" DataSourceID="TracksDataSource"
Height="50px" Width="125px" AutoGenerateEditButton="True" AutoGenerateRows="False">
<Fields>
<asp:BoundField DataField="pk_trackID" HeaderText="pk_trackID" ReadOnly="True" SortExpression="pk_trackID" />
<asp:BoundField DataField="trackName" HeaderText="trackName" SortExpression="trackName" />
<asp:BoundField DataField="trackPath" HeaderText="trackPath" SortExpression="trackPath" />
<asp:BoundField DataField="lyrics" HeaderText="lyrics" SortExpression="lyrics" />
</Fields>
</asp:DetailsView>
<asp:SqlDataSource ID="TracksDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:connectionString %>"
SelectCommand="SELECT * FROM [Tracks] WHERE ([pk_trackID] = @pk_trackID)" UpdateCommand="UPDATE [Tracks] SET [trackName] = @trackName, [trackPath] = @trackPath, [lyrics] = @lyrics WHERE [pk_trackID] = @pk_trackID" >
<UpdateParameters>
<asp:Parameter Name="trackName" Type="String" />
<asp:Parameter Name="trackPath" Type="String" />
<asp:Parameter Name="lyrics" Type="String" />
<asp:Parameter Name="pk_trackID" Type="String" />
</UpdateParameters>
<SelectParameters>
<asp:ControlParameter ControlID="TracksListBox" Name="pk_trackID" PropertyName="SelectedValue" Type="String" />
</SelectParameters>
</asp:SqlDataSource> However, when I click Edit, change something, and then Update it doesn't update the database. However, if I remove the DataField bindings and use the AutoGenerateRows feature it works fine.
View 7 Replies
View Related
Nov 6, 2006
One of the requirements of the UpdateParameters for a GridView I'm building is that the fields that are being edited via EditItemTemplates are passed back to the UpdateParameter as XML. How would I go about combining the fields from the GridView/EditItems into an XML string that I can set as an asp:Parameter?
Thanks.
View 1 Replies
View Related
Mar 15, 2007
OK guys, I'm sure I'm doing something stupid here but after 2 days I find myself extremely frusted... Any help would be appreciated
I'm tring to write an update procedure for an SqlDataSource control that will allow me to chage the primary key values of a record in the table. Everything seems to work fine with the exception of obtaining the old values (the primary key before its changed by the end user) during the update. I've read several articles on the web an in the forums on this topic. Much of it has to do with the .NET beta version alteration from "original_{0}" to "{0}". I believe those conversations do not describe my problem.
Anyhow, onto some source code. Here's the ASP source code for a grid view and sql data source. <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False"
DataKeyNames="productName,productURL" DataSourceID="SqlDataSource1" EmptyDataText="There are no data records to display.">
<Columns>
<asp:CommandField ShowSelectButton="True" />
<asp:BoundField DataField="productName" HeaderText="productName" ReadOnly="True"
SortExpression="productName" />
<asp:BoundField DataField="productURL" HeaderText="productURL" ReadOnly="True" SortExpression="productURL" />
<asp:BoundField DataField="productSupportURL" HeaderText="productSupportURL" SortExpression="productSupportURL" />
<asp:BoundField DataField="description" HeaderText="description" SortExpression="description" />
<asp:BoundField DataField="modified" HeaderText="modified" SortExpression="modified" />
<asp:BoundField DataField="userid" HeaderText="userid" SortExpression="userid" />
<asp:BoundField DataField="useridDomain" HeaderText="useridDomain" SortExpression="useridDomain" />
<asp:BoundField DataField="sortOrder" HeaderText="sortOrder" SortExpression="sortOrder" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:SBAAdminConnectionString1 %>"
DeleteCommand="DELETE FROM [homePageList] WHERE [productName] = @old_productName AND [productURL] = @old_productURL"
InsertCommand="INSERT INTO [homePageList] ([productName], [productURL], [productSupportURL], [description], [modified], [userid], [useridDomain], [sortOrder]) VALUES (@productName, @productURL, @productSupportURL, @description, @modified, @userid, @useridDomain, @sortOrder)"
ProviderName="<%$ ConnectionStrings:SBAAdminConnectionString1.ProviderName %>"
SelectCommand="SELECT [productName], [productURL], [productSupportURL], [description], [modified], [userid], [useridDomain], [sortOrder] FROM [homePageList]"
UpdateCommand="UPDATE homePageList SET productSupportURL = @productSupportURL, description = @description, modified = @modified, userid = @userid, useridDomain = @useridDomain, sortOrder = @sortOrder, productName = @productName, productURL = @productURL WHERE (productName = @original_productName) AND (productURL = @original_productURL)" OldValuesParameterFormatString="original_{0}">
<DeleteParameters>
<asp:Parameter Name="old_productName" Type="String" />
<asp:Parameter Name="old_productURL" Type="String" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="description" Type="String" />
<asp:Parameter Name="modified" Type="DateTime" />
<asp:Parameter Name="userid" Type="String" />
<asp:Parameter Name="useridDomain" Type="String" />
<asp:Parameter Name="sortOrder" Type="Single" />
<asp:Parameter Name="productName" Type="String" />
<asp:Parameter Name="productURL" Type="String" />
<asp:Parameter Name="productSupportURL" Type="String" />
<asp:ControlParameter ControlID="GridView1" Direction="InputOutput" Name="original_productName"
PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="GridView1" Direction="InputOutput" Name="original_productURL"
PropertyName="SelectedValue" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="productName" Type="String" />
<asp:Parameter Name="productURL" Type="String" />
<asp:Parameter Name="productSupportURL" Type="String" />
<asp:Parameter Name="description" Type="String" />
<asp:Parameter Name="modified" Type="DateTime" />
<asp:Parameter Name="userid" Type="String" />
<asp:Parameter Name="useridDomain" Type="String" />
<asp:Parameter Name="sortOrder" Type="Single" />
</InsertParameters>
</asp:SqlDataSource>I added a text box for every field in the grid to the form and update the fields when the user selects a record in the GridView. I then added an Update button to the form and tied the event to this procedure: Protected Sub bUpdate_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles bUpdate.Click
'if the user has not entered key fields!
If missingKeyFields() Then
Exit Sub
End If
Dim count, so As Integer
Dim uDomain, uid As String
'parse out the user id and domain.
Try
If HttpContext.Current.User.Identity.Name = "" Then
uid = "unknow"
uDomain = "unknown"
Else
uid = HttpContext.Current.User.Identity.Name
uid = uid.Substring(uid.IndexOf("") + 1)
uDomain = uid.Substring(0, uid.IndexOf("") - 1)
End If
Catch ex As Exception
uid = "unknow"
uDomain = "unknown"
End Try
'fill in the parameters
'@productName, @productURL, @productSupportURL, @description, @modified, @userid, @useridDomain, @sortOrder
Me.SqlDataSource1.UpdateParameters.Item("productName").DefaultValue = Me.tbProductName.Text
Me.SqlDataSource1.UpdateParameters.Item("productURL").DefaultValue = Me.tbProductURL.Text
Me.SqlDataSource1.UpdateParameters.Item("productSupportURL").DefaultValue = Me.tbProductSupportURL.Text
Me.SqlDataSource1.UpdateParameters.Item("description").DefaultValue = Me.tbProductDescription.Text
Me.SqlDataSource1.UpdateParameters.Item("modified").DefaultValue = Now
Me.SqlDataSource1.UpdateParameters.Item("userid").DefaultValue = uid
Me.SqlDataSource1.UpdateParameters.Item("useridDomain").DefaultValue = uDomain
Me.SqlDataSource1.UpdateParameters.Item("sortOrder").ConvertEmptyStringToNull = True
If Integer.TryParse(Me.tbSortOrder.Text, so) Then
Me.SqlDataSource1.UpdateParameters.Item("sortOrder").DefaultValue = so
Else
Me.SqlDataSource1.UpdateParameters.Item("sortOrder").DefaultValue = ""
End If
'insert the record.
count = Me.SqlDataSource1.Update()
Me.lCommandInfo.Text = count.ToString + " record was updated."
End Sub
The net result of the procedure is the message "0 record was updated." when I select a record in the gridView and then edit the "productName" field and click Update.
In an attempt to trace down the problem I added this code: Protected Sub SqlDataSource1_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles SqlDataSource1.Updating
Message.Text = e.Command.CommandText
Message.Text += "<br>"
For lp As Integer = 0 To e.Command.Parameters.Count - 1
Message.Text += e.Command.Parameters(lp).ParameterName + "=" + e.Command.Parameters(lp).Value
Message.Text += "<br>"
Next
End Sub
The message label displays the following text:UPDATE homePageList SET productSupportURL = @productSupportURL, description = @description, modified = @modified, userid = @userid, useridDomain = @useridDomain, sortOrder = @sortOrder, productName = @productName, productURL = @productURL WHERE (productName = @original_productName) AND (productURL = @original_productURL)
@description=interesting!
@modified=3/15/2007 4:07:31 PM
@userid=unknow
@useridDomain=unknown
@sortOrder=
@productName=ok22
@productURL=http
@productSupportURL=http
@original_productName=ok
@original_productURL=ok
Notice how the "@original_productURL" has the same value as the "@original_productName"? This should not be the case. The @original_productURL should equal "http" since I didn't update the field's value. It seems like the second field of the primary key is not getting updated or passed to the @original_productURL parameter. Since .NET handles the @original_{0} parameters I don't know why the field isn't being properly updated.
Any thoughts on how to track down the root cause of my problem... Or better yet any thoughts on a work around to my problem?
Thanks,Johnny
View 5 Replies
View Related
Jun 14, 2007
I need to know how to setup the ControlParameter for a template control in my Gridview? I have a datepicker in my template and I need to know how to refer to it in the ControlParameter of the SQLDataSource control.
<UpdateParameters>
<asp:ControlParameter Name="dp_start" ControlID="bdpPlanStart" PropertyName="SelectedValue" Type="Datetime" /> Here is the template:<asp:TemplateField HeaderText="Start" SortExpression="dp_start">
<ItemTemplate>
<%#DataBinder.Eval(Container, "DataItem.dp_start", "{0:d}")%>
</ItemTemplate>
<EditItemTemplate>
<BDP:BasicDatePicker id="bdpPlanStart" SelectedValue='<%# DataBinder.Eval(Container.DataItem,"dp_start") %>' runat="server" DateFormat="d">
</BDP:BasicDatePicker>
</EditItemTemplate>
</asp:TemplateField>
View 1 Replies
View Related
Nov 7, 2007
I am trying to reload an AJAX control without reloading the page. This question may belong under AJAX, but I'm not sure if I'm managing the SqlDataSource correctly. I want to set the SelectCommand to a new SQL statement and refresh the form on the screen. My code is below. It doesn't seem to be working. Do I need to call something else or is this correct and the problem is with that nasty AJAX?SqlDataSource oSqlDataSource1 = (SqlDataSource) oContentPlaceHolder1.FindControl("SqlDataSource1");oSqlDataSource1.SelectCommand = "SELECT * FROM WorkHistory WHERE WorkHistoryID = " + sWorkHistoryID;oSqlDataSource1.Select(DataSourceSelectArguments.Empty);
View 2 Replies
View Related
Jan 16, 2008
Is there a way to have two sql update commands so I can use both during an update depending on which row it is?
View 1 Replies
View Related
Feb 8, 2008
I have a number of textboxes in a WizardStep of my CreateUserWizard and I can't update the contents to the database (see below for an example). Any suggestions would be appreciated. Dim txt As TextBox = cuwMoreInfo.FindControl("txtAddress")
srcMoreInfo.UpdateParameters("Address").DefaultValue = DirectCast(txt, TextBox).Text
View 12 Replies
View Related
Apr 5, 2008
Hi All,
i want to use sqldatasource with controlparameters.there are some textboxes and a dropdownlist on my page.i can easily insert and delete records on database table by using these controls as controlparameters by sqldatasource insert() and delete() method but updating fails.i use try catch block to see the error but no errors found.And also update() method returns 1 that indicates that it worked fine but when i look into the database i see that the record is not updated.i am stucked and surprised.any ideas please?
Thanks
View 5 Replies
View Related
Apr 18, 2008
I just want to update a single file on the table with the content of a text box
the sql statement is update GAMME set newvaleur=@newvaleur where product_ID=old_product_ID
on sqldatasource1 updating I wrote
E.COMMAND.PARAMETERS("@newvaleur").value=....
e.command.parameters("old_product_id").value=....
the thing is it doesn't work, I don't think the line with the old_product_id is ok but I don't know how to do it...
View 4 Replies
View Related
Jan 15, 2006
Hi,
I have a repeater which i need to build editing capabilities into in a similar way as the GridView, just a little unsure how to tie it together. Ideally i would like to use a GridView as this would do all of the work for me however it looks like I need to go with the repeater due to the nested nature of the data I am working with.
What is the best way to go about updating the data source from within a repeater? I have already built the edit interface with some MultiViews in the Repeater control and handling the ItemCommand event, just not sure how to actually update the data source.
Can I still use the SqlDataSource wizard to generate all of the SQL for me? If so, within the ItemCommand event handler I have the data i want to update back to the database by using the FindControl method and retrieving the Text, but how do i get this data into the SqlDataSource object and update the database?
Are there any samples available which show how to update a datasource using a repeater?
Your help is much appreciated
trenyboy
View 6 Replies
View Related
Jul 10, 2006
I'm passing a parameter to a stored procedure stored on my sqlserver, or trying to atleast. And then firing off the update command that contains that parameter from a button. But it's not changing my data on my server when I do so.
I'm filling a dropdown list from a stored procedure and I have a little loop run another sp that grabs what the selected value should be in the dropdown list when the page loads/refreshes. All this works fine, just not sp that should update my data when I hit the submit button.
It's supposed to update one of my tables to whatever the selected value is from my drop down list. But it doesn't even change anything. It just refreshes the page and goes back to the original value for my drop down list.
Just to make sure that it's my update command that's failing, I've even changed the back end data manually to a different value and on page load it shows the proper selected item that I changed the data to, etc. It just won't change the data from the page when I try to.
This is what the stored procedure looks like:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ALTER PROCEDURE [dbo].[UPDATE_sp] (@SelectedID int) AS
BEGIN
UPDATE [Current_tbl]
SET ID = @SelectedID
WHERE PrimID = '1'
END
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And here's my aspx page:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Editor.aspx.vb" Inherits="Editor" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Data Verification Editor</title>
</head>
<body>
<form id="form1" runat="server">
<asp:SqlDataSource ID="SQLDS_Fill" runat="server" ConnectionString="<%$ ConnectionStrings:Test %>"
SelectCommand="Current_sp" SelectCommandType="StoredProcedure" DataSourceMode="DataSet">
</asp:SqlDataSource>
<asp:SqlDataSource ID="SQLDS_Update" runat="server" ConnectionString="<%$ ConnectionStrings:Test %>"
SelectCommand="Validation_sp" SelectCommandType="StoredProcedure" DataSourceMode="DataReader"
UpdateCommand="UPDATE_sp" UpdateCommandType="StoredProcedure">
<UpdateParameters>
<asp:ControlParameter Name="SelectedID" ControlID="Ver_ddl" PropertyName="SelectedValue" Type="Int16" />
</UpdateParameters>
</asp:SqlDataSource>
<table style="width:320px; background-color:menu; border-right:menu thin ridge; border-top:menu thin ridge; border-left:menu thin ridge; border-bottom:menu thin ridge; left:3px; position:absolute; top:3px;">
<tr>
<td colspan="2" style="font-family:Tahoma; font-size:10pt;">
Please select one of the following:<br />
</td>
</tr>
<tr>
<td colspan="2">
<asp:DropDownList ID="Ver_ddl" runat="server" DataSourceID="SQLDS_Update" DataTextField="Title"
DataValueField="ID" style="width: 100%; height: 24px; background: gold">
</asp:DropDownList>
</td>
</tr>
<tr>
<td style="width:50%;">
<asp:Button ID="Submit_btn" runat="server" Text="Submit" Font-Bold="True"
Font-Size="8pt" Width="100%" />
</td>
<td style="width:50%;">
<asp:Button ID="Done_btn" runat="server" Text="Done" Font-Bold="True"
Font-Size="8pt" Width="100%" />
</td>
</tr>
<tr>
<td colspan="2">
<asp:Label runat="server" ID="Saved_lbl" style="font-family:Tahoma; font-size:10pt;"></asp:Label>
</td>
</tr>
</table>
</form>
</body>
</html>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And here's my code behind:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Imports System.Data
Imports System.Data.SqlClient
Partial Class Editor
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
Saved_lbl.Text = ""
Done_btn.Attributes.Add("OnClick", "window.location.href='Rpt.htm';return false;")
Dim View1 As New DataView
Dim args As New DataSourceSelectArguments
View1 = SQLDS_Fill.Select(args)
Dim Row As DataRow
For Each Row In View1.Table.Rows
Ver_ddl.SelectedValue = Row("ID")
Next Row
SQLDS_Fill.Dispose()
End Sub
Protected Sub Submit_btn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit_btn.Click
SQLDS_Update.Update()
Saved_lbl.Text = "Thank you. Your changes have been saved."
SQLDS_Update.Dispose()
End Sub
End Class
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Any help is much appreciated.
View 4 Replies
View Related
Aug 3, 2006
I'm referring to this bug, which I've seen a lot of people (including me) run into:
http://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=93937
Has anyone heard if MS plans to fix this soon?
Thanks
View 3 Replies
View Related
Mar 16, 2007
I have a Gridview (edit enabled), connected to a SQLDataSource.
SQLDataSource populates the gridview from 1 SelectCommand.
figure1:
ColumnA | ColumnB | ColumnC
I have 2 SQL Server 2005 tables: Table1 and Table2
Now on my SQLDataSource's UpdateCommand, I want the value of ColumnB to go to Table1's ColumnB, and ColumnC to go to Table2's ColumnC.
How do I do this?
I understand I can't do this with 1 UPDATE-SET sql query. Maybe I can with stored procs or something, but im kinda noobish when it comes to this. How? Thanks
View 1 Replies
View Related
