Can't Delete Old Traces Urgent!
Jan 31, 2002
This one has stumped me. Hopefully somebody can help.
A while ago, I setup a trace that posted the log to the desktop. I needed to stop the trace this morning, so I went into the profiler and deleted the traces. There was a private and shared trace. Now every time I start up something that has to do with sql server, the log pops up on the desktop. I'm not sure why the trace wasn't deleted or stopped. The trace includes what program accessed sql. Whether it is EM or Query analyzer or ISQL. It gets posted in the log. Any suggestions? I need to remove this because the log fills up the drive and causes the server to crash.
Thanks
View 1 Replies
ADVERTISEMENT
Feb 8, 2008
I cleaned up a SQL 2005 server database that was being used as a publisher. SQL 2005 server (cluster server Active/Passive)with SP1 was reinstalled on the box. I removed all replication related entries from replication tables and cleaned up the DB. Now, I noticed that distributor_admin login is present. I am going to set this database as a publisher again. Should I go ahead and delete the old distributor_admin account before re setting replication? Please note that before replicatin was cleaned, this DB was used as publisher ONLY. The distributor DB was residing on another server, which was later cleaned up.
Now, does SQL 2005 server reinstall re create distributor_admin AUTOMATICALLY? Or, should I knock off the existing distributor_admin before RE SETTING replication. The distributor DB will be installed on the other server in this case too.
PLEASE HELP!!
View 1 Replies
View Related
Aug 21, 2006
Any suggestions on how I can monitor the following without using traces? I am a dba/developer working as a developer on a contract, and I'm supposed to be tuning. However, I can't run traces. I've got my own procs that monitor locking, etc. But I would like to get at least i/o and cpu throughout the day. It would also be nice to get the query executed. Basically, the type of stuff you'd normally use traces for.
I know about @@cpu, @@io etc., but these are basically useless (no?) since they only record since the server was started. There is a stored proc but it only monitors these things since the last time it was run.
Does anyone know how I could utilize the above? I tried to write a script but I couldn't get it to work. :(
I realize that in general this is a ridiculous request, but I thought I would ask anyway.
View 4 Replies
View Related
Dec 10, 2007
Please help, it's urgent!!
We are using sql server 2000 DB,
Sa is trying to delete a user from the Great Plains application and got the follow error:
Deleting the login failed for an unknown reason, contact your sql server administrator for assistance.
View 4 Replies
View Related
Jun 12, 2000
Can you run 6.5 traces through the SQL 7.0 profiler. If so, I am getting a login error. I do have the same db name, login, and perms.
Andy
View 1 Replies
View Related
Aug 14, 2007
Hey guys,
I need some help knowing what to look for in Profiler to troubleshoot an issue.
I've got an application that accesses a SQL Server database that has suddenly started timing out when users launch and attempt to log in, and I'm trying to find out where and why the application might be timing out (whether it's a server issue, a stored procedure or SQL query from the application that could be optimized, a table that could be truncated or archived, etc.). All I have to work with from troubleshooting the database side are a series of trace files from Profiler that were run for a total of about 5 minutes while the application was launched and then timed out. Of course, there are a whole lot of statements being issued, hundreds of tables being accessed, lots of stored procedures and even more ad-hoc queries coming straight from application source code.
So my question is, what do I need to look for in these trace files that might be a red flag to an issue? I'm no DBA, but I know that really long durations might be a tip-off. I'm only seeing these on the occasional Event:Audit Logout (which I read in another thread could potentially be very normal). Anything else that I might want to filter for?
I appreciate any help!
Mandy
View 2 Replies
View Related
Mar 20, 2008
I want to use ShowPlanXML in my traces. Information witch is given by this event is quite interesting but I dunno how to bound it with other events. For example I have SqlBatchComplete event and want to get XML plan of it but I have no idea how to do it.
View 3 Replies
View Related
Jul 20, 2007
Hi
I have a procedure in a history database that does insert into 3 tables inside a transaction. users complaint that the proc sometimes takes too long during heavy usage. I did some traces to see what is taking up the time, I found that the rpc duration was averaging > 500 ms (should only take 50ms). I checked to see if one of that statements were taking too much time, but only see the commit transaction statement taking around 500 ms). I check the avg disk queue to be around 30. ( this is on a single local disk) .
So is this definitely a disk issue, or is there something else I need to check
thanks
P
View 1 Replies
View Related
Jan 10, 2001
I have a table with with 4000000 lac records in one table and I tried to copy
the data from this table to an another table using
INSERT INTO TAB2
SELECT FROM TAB1
It failed sayin that the transaction log is full...and neeeds to back up the
transaction log to free some space.
Now if I try to delete the table TAB2 it system is hanging.
Any ideas
Thanks
Reddy
View 5 Replies
View Related
Sep 26, 2005
I am debating whether to go to all the trouble of setting up on-demand Profiler traces on some test servers for the developers here. Really just tracing RPC:Completed and SQL:BatchCompleted, so the developers can at least try to catch a performance problem before going to production. The question I have, though, is just how useful is this sort of information to mid- to low-level (i.e. experience) developers. One of the bigger concerns is over Java applications, which like to hide their queries behind a lot of "sp_cursorfetch" calls.
My question to the forum is if you are a developer, have you ever dreamed of having this sort of information available? How useful is it?
I am going to try to post a poll along with this, but I am not sure it will work..
View 3 Replies
View Related
Nov 29, 2011
When I restart the server that hosts the database engine SQL Server 2005 Standard Edition SP4, the trace gets up mytrace-5.trc with a size of 100 MB and id is 2, leaving the hard disk space, then the SQL Server stops execution of the trace due to lack of space. I do not know how to erase the trace, because I do not know where is it.
The archive log looks like : SQL Trace ID 2 was started by login "sa"
Trace ID '2' was stopped because of an error. Cause: 0x80070070(There is not enough space on the disk.). Restart the trace after correcting the problem.
I only know how delete a trace, knowing id.
EXEC sp_trace_setstatus 2, 0
EXEC sp_trace_setstatus 2, 2
Which configuration file I can disable all SQL Server traces. If I run select * from sys.traces, I just get the default trace:
id = 1
status = 1
path= D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGlog_32736.trc
max_size = 20
stop_time = NULL
max_files = 5
is_rowset = 0
is_rollover = 1
is_shutdown = 0
[code]....
View 4 Replies
View Related
Jul 21, 2004
Hi
if i try to delete data via MFC from Microsofts SQL Server 2000
i get following message: Data can be read only.. Weird i can write and read already. do i have to setup anything in Micrsofts SQL Server 2000 ??
please help its urgent.
Greets
Indian
View 1 Replies
View Related
May 27, 2015
We are planning to convert or change all existing Traces to Extended Events in SQL server 2012. What is the procedure to convert custom traces. We have already created some below custom traces: like this we are planning to convert for all servers.
exec sp_trace_setevent @TraceID, 20, 23, @on
exec sp_trace_setevent @TraceID, 20, 8, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 64, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 21, @on
[code]...
View 6 Replies
View Related
Sep 27, 2000
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
A connection could not be estabished to server--Timeout expired
Please verfy SQL Server is running and check your SQL Server registration properties and try again.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
Please help!!!
View 3 Replies
View Related
Sep 11, 2015
I have some simple files but they are failing because the delete history task is failing as it is looking for files in a non existent directory.
It is looking for files in C:Program FilesMicrosoft SQL ServerMSSQL10_50.INSTANCEMSSQLLog whereas it should be looking in C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLLog
how I can get this corrected so I can get the Maintenance Plans to run correctly.
I have tried deleting and recreating the Plan but to no avail
View 0 Replies
View Related
May 19, 2012
I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies
View Related
Oct 23, 2004
Hello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
View 1 Replies
View Related
Nov 13, 2006
I am having great difficulty with cascading deletes, delete triggers and referential integrity.
The database is in First Normal Form.
I have some tables that are child tables with two foreign keyes to two different parent tables, for example:
Table A
/
Table B Table C
/
Table D
So if I try to turn on cascading deletes for A/B, A/C, B/D and C/D relationships, I get an error that I cannot have cascading delete because it would create multiple cascade paths. I do understand why this is happening. If I delete a row in Table A, I want it to delete child rows in Table B and table C, and then child rows in table D as well. But if I delete a row in Table C, I want it to delete child rows in Table D, and if I delete a row in Table B, I want it to also delete child rows in Table D.
SQL sees this as cyclical, because if I delete a row in table A, both table B and table C would try to delete their child rows in table D.
Ok, so I thought, no biggie, I'll just use delete triggers. So I created delete triggers that will delete child rows in table B and table C when deleting a row in table A. Then I created triggers in both Table B and Table C that would delete child rows in Table D.
When I try to delete a row in table A, B or C, I get the error "Delete Statement Conflicted with COLUMN REFERENCE". This does not make sense to me, can anyone explain? I have a trigger in place that should be deleting the child rows before it attempts to delete the parent row...isn't that the whole point of delete triggers?????
This is an example of my delete trigger:
CREATE TRIGGER [DeleteA] ON A
FOR DELETE
AS
Delete from B where MeetingID = ID;
Delete from C where MeetingID = ID;
And then Table B and C both have delete triggers to delete child rows in table D. But it never gets to that point, none of the triggers execute because the above error happens first.
So if I then go into the relationships, and deselect the option for "Enforce relationship for INSERTs and UPDATEs" these triggers all work just fine. Only problem is that now I have no referential integrity and I can simply create unrestrained child rows that do not reference actual foreign keys in the parent table.
So the question is, how do I maintain referential integrity and also have the database delete child rows, keeping in mind that the cascading deletes will not work because of the multiple cascade paths (which are certainly required).
Hope this makes sense...
Thanks,
Josh
View 6 Replies
View Related
Nov 17, 2006
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
View 6 Replies
View Related
Oct 26, 2000
hi, I have settup up sql mail and did the following:
1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook
2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services
3. I used the profile that I created in outlook to test the sql mail but got an error:
Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI
Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account
I do have a valid domain account
I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
View 1 Replies
View Related
Mar 23, 2001
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed.
I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment.
The error is:
19015: The encrypton is required but no available certificat has been found.
Please help me to start sql server.
Thanks.
Michel
View 4 Replies
View Related
Nov 26, 2007
this is my Delete Query NO 1
alter table ZT_Master disable trigger All
Delete ZT_Master WHERE TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
alter table ZT_Master enable trigger All
I have troble in Delete Query No 2
here is a select statemnt , I need to delete them
select d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
I tried modified it as below
delete d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
but this doesn't works..
can you please help?
and can I combine these 2 SQL Query into one Sql Query? thank you
View 1 Replies
View Related
Feb 16, 2008
I'm using SqlDataSource and an Access database. Let's say I got two tables:user: userID, usernamemessage: userID, messagetextLet's say a user can register on my website, and leave several messages there. I have an admin page where I can select a user and delete all of his messages just by clicking one button.What would be the best (and easiest) way to make this?Here's my suggestion:I have made a "delete query" (with userID as parameter) in MS Access. It deletes all messages of a user when I type in the userID and click ok.Would it be possible to do this on my ASP.net page? If yes, what would the script look like?(yes, it is a newbie question)
View 2 Replies
View Related
Sep 16, 2013
The requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
View 3 Replies
View Related
Aug 20, 2007
I ran the following query in Query Analyzer on a machine running SQL Server 2000. I'm attempting to delete from a linked server running SQL Server 2005:
DELETE FROM sql2005.production.dbo.products
WHERE vendor='Foo'
AND productId NOT IN
(
SELECT productId FROM sql2000.staging.dbo.fooProductList
)
The status message (and @@ROWCOUNT) told me 8 rows were affected, but nothing was actually deleted; when I ran a SELECT with the same criteria as the DELETE, all 8 rows are still there. So, once more I tried the DELETE command. This time it told me 7 rows were affected; when I ran the SELECT again, 5 of the rows were still there. Finally, after running this exact same DELETE query 5 times, I was able to remove all 8 rows. Each time it would tell me that a different number of rows had been deleted, and in no case was that number accurate.
I've never seen anything like this before. Neither of the tables involved were undergoing any other changes. There's no replication going on, or anything else that should introduce any delays. And I run queries like this all day, involving every thinkable combination of 2000 and 2005 servers, that don't give me any trouble.
Does anyone have suggestions on what might cause this sort of behavior?
View 3 Replies
View Related
Nov 20, 2007
Hi,
I have a problem with one report on my server. A user has requested that I exclude him from receiving a timed email subscription to several reports. I was able to amend all the subscriptions except one. When I try to remove his email address from the subscription I receive this error:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Online no help couldn't offer any advice at all, so I thought I'd just delete the subscription and recreate it again, but I receive the same message. "Okay, no problem, I'll just delete the report and redeploy it and set up the subscription so all the other users aren't affected", says I. "Oh, no!", says the report server, and then it give me this message:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.DBInterface.DeleteObject(String objectName) at Microsoft.ReportingServices.Library.RSService._DeleteItem(String item) at Microsoft.ReportingServices.Library.RSService.ExecuteBatch(Guid batchId) at Microsoft.ReportingServices.WebServer.ReportingService2005.ExecuteBatch() --- End of inner exception stack trace ---
What's even weirder is that I'm the owner and creator of the report and I'm a system admin and content manager on the report server and I set up the subscription when the report was initially deployed. Surely I should have sufficient rights to fart around with this subscription/report as I see fit?
I have rebooted the server, redeployed the report, checked credentials on the data source and tried amending and deleting from both the report manager and management studio but still I am prevented from doing so.
Any help would be much appreciated.
Thanks in advance,
Paul
View 3 Replies
View Related
Jul 6, 2000
Hello,
I am facing a huge problem in my sql server database using access as a front end.The main problem is trying to execute queries "views" ,since they reside on sql server now,and using variables or parameters in reports and forms to filter on this query.
Ex.
how can the following be implemented using the same query but in sql server?
Access
------
SELECT MAT_Charts.YYYYMM
FROM MAT_Charts
WHERE ((([Area_Code] & "-" & [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
GROUP BY MAT_Charts.YYYYMM;
It is specifically this statement in which I am interested:
[GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
Thank you very much for your concern.
View 2 Replies
View Related
Feb 23, 2006
First, this is not my code.
This one is weird and I am missing something fundamental on this one. A developer was getting a timeout with this...
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE FROM INVOICECLAIMMAPPING WHERE CLMRECDID IN (SELECT DISTINCT CLMRECDID FROM CLAIMSRECEIVED WHERE SUBMITTERTRANID = @SUBMITTERTRANID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsreceivedPayorServices where ClmRecdPyID in (SELECT ClmRecdPyID
FROM ClaimsReceivedPayors
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedPayors WHERE ClmRecdid in (SELECT ClmRecdID
FROM ClaimsReceived
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
I applied a couple of indices and got ride of the uncorrelated subqueries
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE INVOICECLAIMMAPPING
FROM INVOICECLAIMMAPPING
JOIN CLAIMSRECEIVED
ON INVOICECLAIMMAPPING.CLMRECDID = CLAIMSRECEIVED.CLMRECDID
WHERE CLAIMSRECEIVED.SUBMITTERTRANID = @SUBMITTERTRANID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment
WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsreceivedPayorServices
FROM ClaimsreceivedPayorServices
JOIN ClaimsReceivedPayors
ON ClaimsreceivedPayorServices.ClmRecdPyID = ClaimsReceivedPayors.ClmRecPyID
WHERE ClaimsReceivedPayors.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsReceivedPayors
FROM ClaimsReceivedPayors
JOIN ClaimsReceived
ON ClaimsReceivedPayors.ClmRecdid = ClaimsReceived.ClmRecdid
WHERE ClaimsReceived.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Suddenly this constraint was being violated with the change
ALTER TABLE [dbo].[ClaimsReceivedPayorServices] ADD CONSTRAINT [FK_ClaimsReceivedPayorServices_CLAIMSRECEIVEDPAYOR S] FOREIGN KEY
(
[ClmRecdPyID]
) REFERENCES [CLAIMSRECEIVEDPAYORS] (
[CLMRECPYID]
)
Is the delete on ClaimsReceivedPayors starting before the delete on ClaimsreceivedPayorServices finishes? If so why would it matter between the join and subquery? This one is making me depressed because I can not explain it.
View 2 Replies
View Related
Apr 3, 2008
Hi all
Need some advice solving a little problem I have with my database!
Current setup:
I have a person table that is made up of 39 columns. I also allow for person records to be deleted but I do this by having another table I call LogicallyDeletedrecords. This table is made up of the PersonId, Reason for deletion/suppression and a date time stamp. To access Live records I created a view based on my Person table which contains a WHERE clause to exclude records that exist in the LogicallyDeletedrecords. Similarly, I have another view DeadPersonData which contains Person records that have been removed. Hope it all makes sense so far! Now on to my worries!
The problem:
My Person table contains 9+ million records. The LogicallyDeletedrecords table has 500k+ but I anticipate further growth over the coming weeks/months. My worry is that my LivePersonData view will be too slow to access as my LogicallyDeletedrecords table grows. What’s more, as part of my Load routine, I have to make sure that Person data loaded on to the system is excluded if that same person exists as a deleted member. Both of these actions could slow down my system as the deleted table grows.
My thoughts:
I’ve been thinking of physically deleting dead Person records from my person table (possibly creating an archive table to hold them). But then if I delete them how do I cross check the details when new Person details get loaded?! As I said, my current LogicallyDeletedrecords table holds the PersonId, ReasonDeleted and CreationStamp. The only way is to add further columns which I use to match Person Details?
Any design suggestions would be welcome!
View 3 Replies
View Related
Aug 12, 2007
I am trying to write one sql statement that deletes from two tables. Is it possible ? If yes, any thoughts ?
View 5 Replies
View Related
Feb 1, 2007
Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
View 6 Replies
View Related
Dec 20, 2000
Hi everybody,
I have a batch which needs to be run every day night at 2:00 am.I Using At command but it is not working. if u have idea, please let me know
I AM USING THE FOLLOWING COMMAND :
AT 2:00AM C:SCHED.BAT
Thanks in advance
Krishna
View 3 Replies
View Related
Apr 19, 2008
hi all
its urgent really urgent
please reply soon
I am getting error in sysindexes when i run dbcc checkdb on a production db.
the error is Server: Msg 8928, Level 16, State 1, Line 1
please help me to remove this
all the options of dbcc checkdb as well as table are not helping me
thanks in advance
View 4 Replies
View Related
