Can't Get Alert To Work
Jul 3, 2002
I am setting up alerts on a new installation of SQL 2000 (on windows 2000 op-sys). I have set up the operator for email and paging. When I test the email and paging notification at the operator level, it works fine. I have set up an alert for a user defined message to page and email the operator if the error is raised. The error writes successfully to the SQL Server log however, the page and email do not work. I have similar alerts set up on several SQL 7.0 installations. What am I missing? Any suggestions are greatly appreciated.
Thanks
tcb
View 1 Replies
ADVERTISEMENT
Aug 13, 2015
Can you use the below query to get CPU high utilisation alert purposes for both named and default instance? or, do I need to make any changes here (@wmi_namespace=N'.ROOTCIMV2' ) ?
USE [msdb]
GO
EXEC msdb.dbo.sp_add_alert @name=N'CPU_WM_Utilization_Check',
@message_id=0,
@severity=0,
[code]....
View 2 Replies
View Related
Aug 5, 2004
Folks, i want an alert to be displayed by SQL when the processor shoots above 80% constantly for 30 seconds. Is there any perfomance counter alert sepcifically for this purpose?
Howdy!
View 8 Replies
View Related
Jan 28, 2008
Hi there
I've created the new alert by going to use the following stored procedure:
EXEC msdb.dbo.sp_add_alert @name=N'Severity
19 Error',
@message_id=0,
@severity=19,
@enabled=1,
@delay_between_responses=180,
@include_event_description_in=7,
@category_name=N'[Uncategorized]',
@job_id=N'00000000-0000-0000-0000-000000000000'
GO
But the result has a strange characters between 'Severity' and '19 Error' in sysalerts column. So I can't even drop this by using sp_delete_alert.
My question is how to access and modify the sysalerts system table cause I don't think you can access system table anymore?
BTW ... I am using the 90.00.3042 (Sp2).
Thanks
View 4 Replies
View Related
Jun 12, 2007
Hi,
I have to generate an automatic mail alert based on the sql server database table.In that
table has expiry dates baed on that dates ,I have to send an automatic mail through sql server.
please give solution for this issue.
Thanks in advance.
Regards,
Raja.
View 17 Replies
View Related
Jul 12, 2005
I'm trying to develop a email alert feature on my project. I was trying to approach with SQL trigger wich I think is the best option. Basically, when a new record is inserted into ad table, a email alert goes to peolpe who selected to receive alert wehen certain conditions are met. What would be the best approach? any examples?Thanks
View 2 Replies
View Related
Sep 4, 2002
I have set up an alert to detect when Page Deadlocks rise above 0. Overnight I have DTS packages populating SQL Server and various other jobs (Cognos Cube Builds etc.). My alert detected a Deadlock during the night but all of my processes completed fine. My problem/misunderstanding is that my alert is still popping up every 5 mins saying there is a Deadlock yet there is nothing running or no-one accessing SQL server and I cannot see any trace of the Deadlock in the Current Activity. Is this normal or is it a bug?
View 1 Replies
View Related
Jul 18, 2000
I have two questions:
1) how can I get an alert (via paging or email) when the SQL server is down ?
2) how can I get an alert ( via paging or email) when the SQL Agent goes
down?
I'm a novice SQL Server DBA.
thanks!
View 1 Replies
View Related
Sep 19, 2000
Currently, my client is allowing all the developers to log in as sa and most servers have a NULL sa password. Not a good idea. I am recommending them to move to integrated security with NT groups and to move away from using the sa login altogether. Then to secure the sa login, actually give it a password (something cryptic). I also wanted to set up an alert whenever someone logs in using the sa password. How can that be accomplished? A trigger on the sysprocesses table would work but seems a little risky.
View 8 Replies
View Related
Jan 11, 2000
Hello!
I've created an alert that is raised when the Percent Log Used rises above 80%. The response to this alert starts a job that performs a log backup.
Sometimes the database server is pretty loaded and the log backup takes some minutes and the alert is raised 3 (or more) times before the log backup ends. In response to this alert, plus 3 backups are performed.
Is it possible to make the alert sleep while the log backup is running, to avoid those extra backups?
I thought about disabling the alert in the first step (and re enabling it as the last step) but if the job fails the alert wouldn't be enabled... Right?
Thanks!
Fabio
View 4 Replies
View Related
Nov 27, 2002
I am trying to setup an alert when the following message occurs:
Stored function 'isxpf_execsql' in the library 'c:issrvinisxpf.dll' generated an access violation.
Error: 0, Severity: 20, State: 0
The Alert is defined as:
severity - 020
databasename: all databasese
error message contains this text: isxpf_execsql
This has occured sinde the alert was setup and the history of the alert says it has occured 0 times.
Any help would be appreciated.
TIA,
Philip
View 1 Replies
View Related
Aug 7, 2003
if in response to an alert i have defined a job and this job is scheduled for 10.00 am daily, will this job execute daily or only in response to the alert?
also i have set notifications to my computer in alert as well as in job. buti get notification defined in job and not in alert. why is it so?
View 4 Replies
View Related
Feb 4, 1999
Hi all,
I have encountered the following message while checking the Event Viewer of Administrative Tools (Common) :
SQL Executive Alert Engine
The data portion of event 19020 from MSSQL Server is invalid.
Is this serious or can I ignore it?
Anyone know what steps I should take?
Any advice will be much appreciated.
View 1 Replies
View Related
Apr 2, 2001
Hi all,
We have encountered a major SQLServer 2000 bug. I would like to find out whether anyone has seen this or whether there are work around. We are using SQLServer 2000 Standard Edition running on Windows 2000 Server.
Here is the problem. We have a main SP that calls several long SPs (1000+ lines in each SP) to migrate data from one SQL2000 server to another SQL2000 server. (Both database servers are within the same PC.) The bug occurs in the main SP. It skips a specific SQL statement (which is a call to a SP). There is nothing unique about this SQL statement because the same statement in other parts of the same SP works. This bug occurs consistently. We were able to trace it by putting PRINT statements around this SQL statement and inside the calling SP. We also tried to trace it using the Query Analyzer's Debug with a strange behavior. It seems like the Debugger has a line shifted in it's memory (lines are displayed fine.) This shift occurs a few statements before the Problematic Line. We observe this by trying to put a break point on a valid SQL statement. But the red dot actually shows on a comment line right after the intended line. It does not Step Into the Problematic Line (which is a call to a SP). Note that when we run small SPs, this behavior
does not show up. Everything works fine for small SPs.
Any help is appreciated.
Chung.
View 3 Replies
View Related
May 7, 2001
I am working with alerts and trying to see if there is a way that I can control the message on the notification. I have the job set to send an email and a net message when the job succeeds. Since this message will be going to the user, I owuld like to be able to make the message as clear as possible for them. Does anyone know if the message being sent can be modified or altered with an alert? And how?
Thanks!!
View 3 Replies
View Related
Jul 27, 2004
I wish I could delete the SPAM from Jasel.
-PatP
View 5 Replies
View Related
Aug 11, 2006
Hi guys,
Hope you are all well.
I am trying to set up a 'SQL Server event alert' that will 'net send' a warning message to one of the Operators that have been set-up on our SQL Server.
The alert has been configured to act on severity level '009 - User Defined', for all databases.
I have created a user defined system message with a severity level '9' on the sysmessages table.
EXEC sp_addmessage 80000, 9, 'My User Defined Message'
...and I have raised this error on our SQL Server.
RAISERROR(80000, 9, 1) WITH LOG
The error message is being generated in the SQL Server Log file, but for some reason my Alert does not appear to fire off the 'net send' event.
The operator is 'available to receive notifications', and I have tested the 'net send' command successfully.
Does anyone know why this Alert might not be sending a message with the 'net send' command?
Thanks in advance,
Kevin
View 1 Replies
View Related
May 11, 2004
Hi folks! I have an alert that fires on error 208(Invalid object name '%.*ls'.)
Can i customize it to get some thing like in the Net-Send command:
(invalid object name '%.*ls'. executed by %user from %computername)
What my concern here is to customize the messages. The description option in the alert allows only static info to be added.
Howdy!
View 1 Replies
View Related
May 26, 2008
Hi,
does anyone know if it is possible to set an alert like that ?
if cpu is over 85% and stay for more then 1min continuous over 85%then alert.
THX
View 15 Replies
View Related
Feb 28, 2007
I want to monitor updates on a certain table using an alert. When the table gets updated (any update), the alert will trigger a job.
Btw, I'm not allowed to add a trigger on the table, hence my idea to use an alert. Somehow I think I should use a WMI event alert, but I'm not sure which server event I should choose. In fact I'm not even sure I shóuld use a WMI event alert.
View 1 Replies
View Related
Jul 23, 2005
I'm a newby and I have a quick question. I have set up this procedureto run as a job. I can create a block and have it populate the table,but I need to be alerted via email when the table is being populated. Ido not know what step/s am I missing. Here is the scripts I ran:CREATE TABLE BlockMonitorInfo(spid smallint,blocked smallint,waittype binary,InfoTime datetime)go/*********creates a control table that lets you turn the backgroundprocess on and off**********/CREATE TABLE BlockMonitorControl(BlockMonitorOn tinyint)go/**********populates the control table and initially turns on thebackground process******/INSERT INTO BlockMonitorControlVALUES (1)go/*StartBlockMonitor accepts one datetime paramter that controls thesampling delay for capturing blocking information*/drop PROC StartBlockMonitorgoCREATE PROC StartBlockMonitor@DelayTime char(9)ASDECLARE @CurrentInfoTime datetime-- Set the control flag in BlockMonitorControl = Onupdate BlockMonitorControl set BlockMonitorOn = 1-- Capture blocking lock info until the control flag is set = false-- We set it off by running StopBlockMonitor which we'll create soon.WHILE (SELECT BlockMonitorOn from BlockMonitorControl) = 1BEGINSELECT @CurrentInfoTime = getdate()INSERT INTO BlockMonitorInfo (spid, blocked, waittype, InfoTime )SELECTspid, blocked, waittype, @CurrentInfoTimeFROMmaster..sysprocesses (nolock)WHEREblocked <> 0WAITFOR delay @DelayTimeENDgo/*StopBlockMonitor turns off the capture of blocking info by setting thecontrol flag in BlockMonitorControl = off*/DROP PROC StopBlockMonitorgoCREATE PROC StopBlockMonitorASUPDATE BlockMonitorControl SET BlockMonitorOn = 0goSELECTBlockMonitorInfo.*FROMBlockMonitorInfo,(SELECT distinct InfoTime FROM BlockMonitorInfo)BlockChainTimeWHEREBlockMonitorInfo.InfoTime =BlockChainTime.InfoTimeand Blocked not in(SELECT spidFROM BlockMonitorInfoWHERE InfoTime =BlockChainTime.InfoTime)This last query is what I have set up in a job, but I need the job toalert us when the table gets new information added.Thank you for the assistance!
View 1 Replies
View Related
May 23, 2008
Hi,
how can i create alert for CPU - if CPU grater then 90% and not drop below that in 1min then alert me.
THX
View 2 Replies
View Related
May 4, 2007
i have created sql alerts in sql server cluster
the alert fails trigger eventhough eventlog and sql server agents are working it reflects as if no events occur
View 2 Replies
View Related
Jun 13, 2007
HI,
I have to send an automatic e-mail based on database table .Could any body help me
how to write stored procedure and where to execute it.How to send an automatic e-mail through sql server?
Thanks in advance.
Regards,
Raja.
View 1 Replies
View Related
Mar 6, 2000
I'm getting an intermittent alert on SQL 7.0. This alert is firing on a severity 24 hardware error.
This has now happened twice and both times I have looked at both the SQL error logs and the
SQL Server event viewer. There are no references to the severity 24 errors in either the SQL error logs or
the event viewer. What could cause this alert and why isn't it being logged properly?
Randy
View 1 Replies
View Related
Dec 6, 2000
I am currently having problems with a SQL server running out of connections. Setting the number of connections to unlimited is not an option. The connections that are established are from other applications and asp pages that should disconnect but dont. I have setup an alert to send me a message everytime the maximum number of connections is met. I have also setup a job to run sp_who. The alert runs the job with the sp_who command when it is fired. How can I save the results of sp_who to a file?
TIA
Philip Talavera
View 2 Replies
View Related
Feb 9, 2000
Hi ,
I have a SQL 7 database in which I have set the autogrow on. I need some way to be notified when the database does an autogrow. The reason for this is that if it does an autogrow once then if I am notified then I can manually expand the DB size without having SQL Server do multiple autogrows. I was looking at setting an alert but cannot find any message in sysmessages that seem to be information types for auto grow. Has anyone done this kind of thing.
Thanks
Venkat
View 2 Replies
View Related
Mar 28, 2006
I created an alert (18453) to audit successful logins. After I was done with the alert I made I edited the alert 18453 to disable event log logging and then deleted the alert. My problem is that the alert is deleted but it continues to log to the SQL Server error log and the windows application log. I have tried restarting the SQL Server Agent and even had the server rebooted over the weekend. Has anyone else had this problem? Where is this configured and how can I disable it?
View 2 Replies
View Related
Mar 18, 2002
Hello Everyone,
Please help Newbie !!
I have a server where I have been getting
"SQL Alert Sev 24 : Fatal Error : Hardware Failure" for
the past week.
Occurence : We disconnected the workstation (which we are
using as SQL Server) from one floor and connected it to
another floor. No Configurations changed. No hardware
failures reported so far on the win 2000 box.
We are very well able to do the SQL development on that
box. Everything seems normal except I get this error sent
atleast once a day in the morning.
Regards,
Kurt
Follow are the Erros/Warnings in the Event log.
1)
The SNMP service is ignoring extension agent key
SOFTWAREMicrosoftDHCPMibAgentCurrentVersion
SOFTWAREMicrosoftWINSMibAgentCurrentVersion
SOFTWAREMicrosoftIASAgentCurrentVersion
SOFTWAREMicrosoftACSAgentCurrentVersion
because it is missing or misconfigured.
2)
Application popup. Service Control Manager : At least one
service or driver failed during
system startup. Use event viewer to examine the event log
for details.
3)
The site server ILS service service dependsd on the IIS
Admin Service which failed to start becasue of the
following error: The service cannot be started either
because it is disable or because it has no enabled devices
associated with it.
4)
The remote access connection manager service depends ont
eh Telephone service which failed to start because of the
following error: The service cannot be started, either
because it is disabled or because it has no enabled
devices associated with it.
5) Network Problem. The time service has not been able to synchronize with domain controller for a long time.
..
View 1 Replies
View Related
Jul 17, 2002
I need to set up an alert to for when blocking happens. What condition do I use. I can't find the one that correlates to blocking.
Please help.
Much appraciated,
K
View 1 Replies
View Related
Mar 6, 2004
Hi, I need to set an alert when a replication-conflict occurs rather that to check for conflicts manually. How can i accomplish this? I couldn't find the particular error-message to trap in an alert.
Regards!!
View 1 Replies
View Related
May 6, 2008
Is there an alert for physical memory in SQL2K5? My requirement is - I should get an alert when the free space on a particular drive comes below a threshhold.
------------------------
I think, therefore I am - Rene Descartes
View 11 Replies
View Related
May 7, 2008
is there a tsql command that returns the amount of disk space available. I want to set up a job to run and email if it gets to a certain level.
View 1 Replies
View Related
