Can I Check For Null Reference Before Referencing ReportItems?
Feb 4, 2008
A report I maintain has an extensive footer that appears on each page, populated with information I've stashed into invisible cells in the table's header. This works great, except in rare circumstances where the report includes a page that doesn't display the table at all--in which case the report errors when it attempts to print ("Object reference not set to an instance of an object").
Due to the requirements of the report, I cannot guarantee that the table will appear on every page, every time. Is there a way I can safely refer to the reportItems collection, in case of Nulls? I'll be okay with blank values in the footer in the cases where the page has no reportItems to work with, but I can't have the report blow up when printing.
Thanks in advance,
Jeff Lautenschlager
View 3 Replies
ADVERTISEMENT
Aug 31, 2000
I receive the following error when creating a CHECK constraint that references another column. According to the good old Wrox SQL Server book, I'm using the correct syntax. Anyone have any ideas???
Thanks in advance!
Server: Msg 8141, Level 16, State 1, Line 1
Column CHECK constraint for column 'end_date' references another column, table 'Session'.
Here's an example of the script that I'm using:
CREATE TABLE Session (
session_key char(18) NOT NULL,
course_key char(18) NOT NULL,
site_key char(18) NOT NULL,
instructor_key char(18) NOT NULL,
start_date smalldatetime NULL,
end_date smalldatetime NULL
CHECK (end_date >= start_date)
)
.
View 1 Replies
View Related
Oct 20, 2015
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
View 5 Replies
View Related
Jun 11, 2015
CREATE TABLE PRODUCT_SALES
(
Salesmanid BIGINT,
Productid BIGINT
)
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,1)
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,2)
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,3)
SELECT * FROM PRODUCT_SALES
/* SalesmanID is reference key from Sales Master and ProductID is reference key from Product Master. How should i restrict user through DB with any constraint check, if user tries to enter
INSERT INTO PRODUCT_SALES (Salesmanid,Productid) VALUES (1,2),
It should throw error , if possible user defined message would be more useful.
View 7 Replies
View Related
Jun 15, 2006
For example, the table below, has a foreign key (ManagerId) that points to EmployeeId (primary key) of the same table.
-------Employees table--------
EmployeeID . . . . . . . . . . int
Name . . . . . . . . . . . nvarchar(50)
ManagerID . . . . . . . . . . . int
If someone gave you an ID of a manager, and asked you to get him all employee names who directly or indirectly report to this manager.
How can that be achieved?
View 6 Replies
View Related
Mar 12, 2007
Dear all,
I am running into a null reference exception on replication with SQL Server 2005 Compact Edition. The problem occurs at repl.synchronize(). Even though the statement is inside a try-catch block, the exception is not caught, and the application quits.
Device O/S: Windows Mobile 5.0 v 5.1.195 Build 14957.2.3.1
Hardware: Dell Axim X51v, Intel PXA270
Database: SQL 2005 SP2 (no post SP2-patches)
Exception shows as "an unexpected error has occured in AppName.exe. Select Quit and then restart this program, or select Details for more information." Details:
.. at NullReferenceException at AppName.Form1.Synch()
.. at .... (various lines)
.. at AppName.Form1.Main()
The application is based on the tutorial (Creating a Mobile Application with SQL Server Compact Edition) at http://msdn2.microsoft.com/en-us/library/ms171908.aspx.
The application was successfully working initially but then stopped working on replication after some minor modifications which were not related to the replication code, e.g. adding some buttons to the form.
Three things are puzzling me here..
1. The fact that this is a NullReferenceException and not a SqlCeException
2. Why the try-catch block doesn't work
3. Why the exception occurs
Is this a bug or am I doing something wrong here?
Any help would be appreciated.
Code sample below:
Sub Synch()
Try
LogMsg("Deleting db...")
DeleteDB()
LogMsg("Initializing repl...")
Dim repl As New SqlCeReplication
repl.InternetUrl = http://192.168.0.100/SQLMobile/sqlcesa30.dll
repl.Publisher = "TRKSRV"
repl.PublisherDatabase = "trk_db"
repl.PublisherSecurityMode = SecurityType.NTAuthentication
repl.Publication = "Trk"
repl.Subscriber = "Trk"
repl.SubscriberConnectionString = "Data Source=""Program FilesTrk2007DefectTrk.sdf"";Max Database Size=128;Default Lock Escalation =100;"
LogMsg("Adding subscription...")
repl.AddSubscription(AddOption.CreateDatabase)
LogMsg("Synch...")
repl.Synchronize()
LogMsg("Cleanup...")
repl = Nothing
Catch err As SqlCeException
MessageBox.Show(err.ToString & " " & err.HResult & " " & err.NativeError & " " & err.Message & " " & err.InnerException.ToString)
Catch err2 As Exception
MessageBox.Show(err2.ToString & " " & err2.Message.ToString & " " & err2.InnerException.ToString)
End Try
End Sub
View 1 Replies
View Related
Apr 7, 2008
I have a custom assembly that uses a config file to obtain database connection settings. This dll is then used by my sql report. I have added refrerenced to all the required dll's in my report and added the required code groups to all the necessary files. I have also placed my app.config file in C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer and C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssemblies
However when I actually run the report in the designer (vs2005) I am receiving Null reference exceptions when my code tries to read my config file because it is reading the machine.config file and not my app.config file. If I hard code my connection string everything works fine.
Can anyone tell me why the machine.config file would be referenced instead of my app.config file and how I can stop it from doing this?
View 6 Replies
View Related
Apr 17, 2008
Hi
I have two tables. one MasterDetail and second is countrydetail
In master detail i have MasterDetailId (Primary) and countryId.
In CountryDetail table I have Countrid (Primary),CountryName.
I don't want to give relationship because i can insert null value in countryid in MasterDetail table.
So i have wriiten query like this
-> select c.CountryName,m.MasterDetailId from MasterDetail m,CountryDetail c where c.CountryId=m.CountryId and m.MasterDetailId= '2'
If In MasterDetail table if CountryId is null then it will not show me any record. So I want that record and its value with this query and checking null values. Help me about solving this query.
Thank You
View 4 Replies
View Related
Mar 11, 2008
I am trying to create a stored proc.
I have to check a parameter for null value and if null then set it to zero
Here is the stored proc
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UPDATENOA]
(
@Accepted char(10),
@NOAId bigint,
@Court char(30),
@RetainerType char(30),
@PendingInTaxCourt char(1)
)
AS
begin
UPDATE NOA set StageCode = Accepted,Court=@Court,RetainerType=@RetainerType,PendingInTaxCourt=@PendingInTaxCourt where NOAId = @NOAId;
Declare @Sequence int
Select @Sequence = MAX(Sequence) From [dbo].[NOAStages] where NOAId=@NOAId;
if @Sequence IS NULL
{
@Sequence=0
}
Insert into [dbo].[NOAStages] (NOAId,StageCode,Sequence)
values (@NOAId,@Accepted,@Sequence+1)
But this is giving me error. What is the correct way to do this.
Thanks
View 6 Replies
View Related
Jan 19, 2007
How can I check on NULL values in a Select statement?
SELECT ID FROM TabelWHERE somecolumn <> NULL??
View 2 Replies
View Related
May 19, 2006
SELECT whatever_field, CASE LEN(DrAccount) WHEN 12 THEN DrAccount ELSE CASE (Note1) WHEN NULL THEN Location + DrAccount ELSE Note1 + DrAccount END END AS Account FROM Table1 The purpose of the CASE(Note1) is when Note1 column is null, return Location+DrAccount. The actual result is when Note1 column is null, it always returns null, Location+DrAccount is not executed. When Note1 column is not null, it returns correctly Note1+DrAccount. The problem seems to reside in validating the null value in WHEN NULL How to check for null in CASE(fieldname) WHEN ???
View 1 Replies
View Related
Jun 20, 2007
the SQL string below worked, and then started bringing up every record.
it should only select records with a value in at least one of the columns, but it apears to be suggesting that all records have some data in one of the columns. if I check the database or the output on the web page there apears to be no data. ?? confused.
"SELECT id, make, model FROM vehicles WHERE workToBeDone1 IS NOT NULL OR workToBeDone2 IS NOT NULL OR workToBeDone3 IS NOT NULL OR workToBeDone4 IS NOT NULL OR workToBeDone5 IS NOT NULL"
Any ideas how I could implement this more robustly?
cheers
M
View 14 Replies
View Related
Apr 14, 2015
Content table
deleteddate revokeddate
1/1/2001 null
null 2/2/2003
4/5/2004 null
I am trying to create a stored procedure where.I need to loop through every row of the table and check if there exists a date in either of the column. If date exists in either of the column for every row, I need to update some other stuff.For the above table, it meets my requirement, so I need to update. However if the table is as below, it doesn't meet the requirement, so I don't need to update
deleteddate revokeddate
1/1/2001 null
null null
4/5/2004 null
I started off as below, But I am getting incorrect values.
Declare @deleterevoke bit
Declare @DelRevId int
Declare @DelRevnumrows int
Declare @tempDeletedDate datetime
Declare @tempRevokedDate datetime
[code]....
View 4 Replies
View Related
Jul 2, 2007
hi guys, I'm using SQLServer 2005 and I was wondering how I check if some variable is null or not? I tryied to do as the code show but it doesn't work:
declare @number int
set @number = (select number from numbers where number_id = 1)
if (@number = null)
begin
set @number = 12
end
Thank you very much
View 3 Replies
View Related
Aug 23, 2007
Okay, I have the following statement for my store procedure:
Code Snippet
IF exists (SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID))
SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID)
ELSE
SELECT null ID, 'No parent page yet' title FROM Outlook
I wanted to put an ELSE IF statement right before the ELSE statement to check if the value is null. Something like this:
IF exists (SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID))
SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID)
ELSE IF (SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID) != null
SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID)
ELSE
SELECT null ID, 'No parent page yet' title FROM Outlook
Or if this is possible, it's much better:
IF exists (SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID) AND (SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID) != null)
SELECT [ID], [title], [name], [issueID] FROM [Outlook] WHERE ([issueID] = @OLissueID)
ELSE
SELECT null ID, 'No parent page yet' title FROM Outlook
I don't quite get how to write the SQL statement that I wanted so any help is much appreciated.
View 12 Replies
View Related
Aug 20, 2006
I am using Visual Web Developer Express 2005 and SQL Server Express 2005.
I have set up a trigger that fires when an update has been performed on a specific table. The trigger checks to see if specific columns have been updated. If they have, then the trigger code is executed. This part works fine.
I am now trying to find a way to check if null values exist in either one of two field from the same table. If either field contains a null value, then I don't want the trigger code to be executed.
How can I check for null values and skip a block of code within my Transact Sql trigger.
Thanks.....
View 2 Replies
View Related
Jan 27, 2008
I'm about ready to pull my hair out. I have a repeater control, and a date field. If the field is a valid date, I'll use it to calculate and display the person's age. Otherwise, I want to display "N/A". My problem is trying to determine if the date field is null or not.I'm using SQL Server 2005 which allows Nulls in the date field, and for many records I don't have a birth date. It makes sense for these records to leave the date Null. This is my code:Protected Sub Repeater1_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles Repeater1.ItemDataBound If e.Item.ItemType = ListItemType.Item OrElse e.Item.ItemType = ListItemType.AlternatingItem Then Dim LabelIcon As Label = CType(e.Item.FindControl("LabelIcon"), Label) Dim LblAge As Label = CType(e.Item.FindControl("LblAge"), Label) Dim inmate As WAP.prisonmembersRow = CType(CType(e.Item.DataItem, System.Data.DataRowView).Row, WAP.prisonmembersRow) If System.IO.File.Exists(Server.MapPath("~/images/picts/" & inmate.FILE2 & ".jpg")) Then LabelIcon.Visible = True End If If inmate.DATE_OF_BIRTH Is DBNull.Value Then If IsDate(inmate.DATE_OF_BIRTH) Then LblAge.Text = "Age: N/A" Else LblAge.Text = "Age: " & GetBirthdate(inmate.DATE_OF_BIRTH) End If End If End IfEnd Sub How can I resolve this?Diane
View 7 Replies
View Related
Sep 9, 2014
declare @user varchar(30) = ''
if(@user is not null or @user <> '')
BEGIN
print 'I am not empty'
END
ELSE
BEGIN
print 'I am empty'
ENd
The output should be 'i am empty' but when i execute this i am getting ' i am not empty'. even i did browse through but i don't find the difference in my logic.
View 9 Replies
View Related
Mar 13, 2014
I am using the below query to calculate column values. But I need to return zero when a column values is empty or null.
select [Funding] [Fundings],
[Original] AS [Originals],
[Variance] = SUM([Previous_Year]-[Current_Year]),
[SumValue] = SUM([CurrentYear]/4),
[ActualValue] = SUM([Variance] * 0.75),
[FinanceYear],
[New Value] = SUM([Previous_Year]+[Current_Year])
from Finance
GROUP BY [Original], [FinanceYear]
View 1 Replies
View Related
Mar 28, 2014
select '$ '+ CONVERT(varchar,CONVERT(decimal(10,0),CONVERT(money, Amt_Value)),1) as [Amount]
from Products
How can I sum this column values and need to set a validation like the column has null values it has to return zero.
View 2 Replies
View Related
Mar 20, 2006
Hi!I have a table with a check constraint. But unfortunately it does notwork like I wanted.CREATE TABLE MAP([R_ID] [T_D_ID] NOT NULL,[R_ID1] [T_D_ID] NULL,CONSTRAINT CHECK_ID1 CHECK (R_ID1 = R_ID OR R_ID1 = NULL),CONSTRAINT [PK_MAP] PRIMARY KEY ([R_ID]))R_ID1 should always have the value of R_ID or NullThe following statements should cause errors:insert into map (R_ID, R_ID1)values(1,2);update map set R_ID1=3 where R_ID=1;But there occur no errors. Does anyone have an idea? It is an SQL Server2000.TIASusanne
View 6 Replies
View Related
Jul 20, 2005
Hi, I have a record set that is bound to a table in MS SQL Server. Onefiled in the table is bound to a "long" type member variable in theRecordSet. What will happen to the "long" variable when the field isNULL in the table?Thanks!-Yi
View 1 Replies
View Related
Aug 16, 2006
I have a column say 'ActivationDate' which is a (database timestamp [DT_DBTIMESTAMP]) which I want to replace with an expression in derived columns
The condition is if 'ActivationDate' field is null or '' then 'Null' else 'ActivationDate'
I am struggling to write this condition. Without condition i.e. at present it saves the value in this database '1753-01-01 00:00:00.000'.
In the preview the 'ActivationDate'field does not show any thing so I recon it is either null or ''
View 6 Replies
View Related
Aug 5, 2015
I have a table that keeps track of all changes that were performed in an application. There is a column called "old value" and column called "new value". There are some values in the application that don't require data therefore the "old value" or "new value" values can be empty. These columns are an nvarchar data type because the value can be text or numbers or dates. An example is "ReceivedDate". There is a report that is generated based on this table.
What is happening is the query in the report dataset is adding dates when it should be displaying empty. They query is using "CASE/WHEN/THEN". What I need is "When the column is "RecievedDate" and it is not null then convert it to a date". This is for formatting purposes.
This is an example of the table:
UpdateColumn
Old Value
New Value
ReceivedDate
7/8/2015 5:00:00 AM
ReceivedDate
7/8/2015 12:00:00 AM
7/9/2015 5:00:00 AM
ReceivedDate
7/9/2015 12:00:00 AM
So, the first time it was updated there was no value but it was replaced with July 8, 2015 and so on.This is what the report is displaying
This is the query:
CASE UpdateColumn
... WHEN 'ReceivedDate' THEN (replace(convert(varchar(11),CONVERT ( date, oldvalue ), 106), ' ', '-') )
...
I tried adding
CASE UpdateColumn
...
WHEN 'ReceivedDate' IS NOT NULL
THEN (replace(convert(varchar(11),CONVERT ( date, oldvalue ), 106), ' ', '-') )
...
But it did not like the "IS NOT NULL".
View 9 Replies
View Related
Jun 25, 2015
I am looking for the best way to check to see if any columns are still NULL in a record. I have a form that gets filled out by users and the values entered into TableA. There are 6 columns in the table, 5 are responses and column6 indicates if the record is complete. So I want a way to see if all of the first 5 columns are NOT NULL and, if so, mark column6 with a 1.
I am thinking this would be a good thing for a trigger on INSERT or UPDATE to check to see if the first 5 columns are filled in and then mark the record as complete.
View 5 Replies
View Related
Oct 27, 2004
i have a trigger on a table right now... when fields are inserted, theres a text field inserted and i want to check if that text field = '' (the empty string, not NULL) and if it doesn't equal that, then perform some row updates on other tables, but if it is empty, to not do anything else in the trigger... right now i have this:
Code:
IF ((SELECT Note FROM XATPoDetail WHERE ReqNbr = (SELECT ReqNbr FROM Inserted)) LIKE(''))
Note is the text field, XATPoDetail is the table where its being inserted into. I had to do the select FROM the table because it wouldn't let me select a text data type from the "Inserted" virtual table
but it tells me me "Error 279: The text, ntext, and image data types are invalid in this subquery or aggregate expression"
thanks
View 2 Replies
View Related
Oct 27, 2004
i have a trigger on a table right now... when fields are inserted, theres a text field inserted and i want to check if that text field = '' (the empty string, not NULL) and if it doesn't equal that, then perform some row updates on other tables, but if it is empty, to not do anything else in the trigger... right now i have this:
IF ((SELECT Note FROM XATPoDetail WHERE ReqNbr = (SELECT ReqNbr FROM Inserted)) LIKE(''))
Note is the text field, XATPoDetail is the table where its being inserted into. I had to do the select FROM the table because it wouldn't let me select a text data type from the "Inserted" virtual table
but it tells me me "Error 279: The text, ntext, and image data types are invalid in this subquery or aggregate expression"
thanks
View 3 Replies
View Related
Oct 28, 2015
I am using SSDT to deploy my database project. This project has a post deployment script and i am creating a new user in this post deployment script. I have used sqlcmd variable to capture the username. I am doing a null/empty check for this variable and my code looks like below.
IF (([$(UserName)] IS NOT NULL) OR ([$(UserName)] <> ''))
BEGIN
CREATE USER [$(UserName)] WITHOUT LOGIN WITH DEFAULT_SCHEMA = dbo;
GRANT CONNECT TO [$(UserName)];
END
When i execute this, I am getting below error.
Could not deploy package.
Error SQL72014: .Net SqlClient Data Provider: Msg 207, Level 16, State 1,Line 15 Invalid column name 'User Name'.
Error SQL72045: Script execution error. The executed script:
View 2 Replies
View Related
Oct 19, 2015
how to do a check for 2 columns. As long as there is data for at least one of the columns I want to return rows.
Example Data
create table test
(
ID int,
set1 varchar(50),
set2 varchar(50),
[code]....
View 4 Replies
View Related
Apr 26, 2007
Is there a way to hide the value of an aggregated value in a matrix report when a row is hidded?
Something like IIF(ReportItems!TextBox1.Hidden,True,Flase)
The above gives me an error saying that Hidden is not a member of ReportItem.
View 5 Replies
View Related
Jun 12, 2007
I want to do is display the sum of textboxes in a group so I can have a subtotal for every group.
I tried these things:
Sum(ReportItems!txtbudget.Value).
I can't use Fields collection because the textbox value is from custom code so there are no Fields.
I searched for options on this and one option was supposed to be adding a field to the dataset. I tried this and I get "An error occured on the report server" when building the report before I even reference the field in the report.
I even wrote code to do the sum and passed in the ReportItem. I then get the error about the grouping scope.
I want the payroll sum to be the subtotal of each column. The budget values along with some other columns are from custom code that makes database calls (which was a workaround for another problem).
Object
Object Title
Budget
Current Spent
YTD Spent
4100
EMPLOYEES
$10,000.00
$11,307.45
$40,000
4105
EMPLOYEES - TEMPORARY
$2,000.00
$506.00
$7,000
4200
EMPLOYEE BENEFITS
$13,000.00
$2,354.74
$30,000
Payroll
View 12 Replies
View Related
Sep 10, 2014
I am using vs 2010 to write my dtsx import scripts.I use a script component as a source to create a flat file destination file.Everything have been working fine,but then my development machine crashed and we have to install everything again.Now when i use the execute package utility to test my scripts i get the following error:
Error system.NullReferenceException: Object refrence not set to an instance reference.
In PreExecute section
TextReader = new system.io.streamreader(" file name")
In the CreateNewOutputRows:
dim nextLine as string
nextLine = textReader.ReadLine
[code]...
is there something which i did not install or what can be the error?
View 0 Replies
View Related
Aug 16, 2007
I can add two reportitem controls, ie reportitems!begbal.value + reportitems!deposits.value, without a problem. However, when I add the 3rd reportitem control to the expression, ie + reportitems!withdrawals.value, some really funky arithmetic occurs. All of these controls I am referring to are in the same group footer.
Any help out there would be greatly appreciated.
View 1 Replies
View Related
