Can I Export/attach A MS SQL 2005 Database To MS SQL2000 ?
Feb 13, 2007I know I can go from 2K to 2005, but can I go the other way ?
Thanks
I know I can go from 2K to 2005, but can I go the other way ?
Thanks
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
Hi
I have new bought the SQL server 2005 enterprise, but it have 2 CDs, so what are the differences between CD1 and CD2? and so which one should i install first? or is it necessary to install both two or just need to install one of them?
And about my original sql 2000 database, can i just attach it's MDF file into the sql 2005 engine, or which import wizard can load the sql 2000 MDF into sql 2005? or do i need to keep the sql 2000 engine before do this?
thx
I detached a db to copy it and to my surprise i cant reattach it the same way i detached ... How do i do this?
View 1 Replies View RelatedA DB was in suspect mode I detached & tried to re- attach the db. but it return below error
SQL Server detected a logical consistency-based I/O error: torn page
There are no good backups available for this can anybody help
We are testing our product installation and run into the following problem on Windows XP and Server 2003, but not 2000:
I am trying to attach a database using a command line program that we made, but get the following error:
Could not open new database 'Launcher5'. CREATE DATABASE is aborted.
File activation failure. The physical file name "C:MARCMARC5DataLauncher5_log.LDF" may be incorrect.
The log cannot be rebuilt when the primary file is read-only.
I have a bunch of database mdf's and ldf's that was running on 2005. Can I attach these to an instance running on 2008 without any problems?
View 3 Replies View RelatedHi All
I try to attach MobileShop_Data.MDF database by using SQL server 2000 and SQL 2005 Express, but It's impossible . I don't know why .
Someone can help me bypass this problem ? this is my database .
http://www.4shared.com/file/26729050/17b56825/Database.html
Many thanks in advance .
...
regards,
Quachnguyen
I have MS SQL Server 2005 installed and when trying to connect to AdventureWorks DB
Downloaded AdventureWorksDB.msi file and when trying to attach recieve this error when running script ?
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'AdventureWorks'. CREATE DATABASE is aborted.
Msg 602, Level 21, State 50, Line 1
Could not find row in sysindexes for database ID 8, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Then tried to attach the DB and get this
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'JKIMBLE1'. (Microsoft.SqlServer.Smo)
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 8, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'AdventureWorks'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Is there a difference between MS SQL Server 2005 and SQL Server 2005 Express Edition
I have installed a sample from the web and put it in my localhost inetpub folder, then i open up my SQL Server 2005 Express to attach the database from the App_Data directory, it throws an error below:
errors occur in both window and sql authentication login.
Error:
Attach database failed for Server '...SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
Additional Information An exception occcured while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
Directory lookup for the file "C:Documents and SettingsmirtariqMy DocumentsWorksStarterKitVSI smallbusiness_csApp_DataSmallCompanyDB_log.LDF" failed with the operating system error 3(The system cannot find the path specified.).(Microsoft SQL Server, Error:5133)
I m facing a strange phenomenon.
Please refer to below points.
environment:
------------------
windows XP sp2
SQL Server 2005 express [log on as 'network service'(by default)]
programming language: VC++(MFC)
There is a sample database in .mdf format which to be attached to SQL Server.
Ist case:
------------
I add MASTERDSN (for master databse) to ODBC by calling API SQLConfigDataSource() and then attach the sample DB to SQL Server by calling stored procedure 'sp_attach_db' through VC++ code.
On verification from SQL Server management studio express, the DB attached is in read only mode.
II case:
----------
I add MASTERDSN using ODBC data source administrator manually.
Now I add MASTERDSN (again with same name) by calling API SQLConfigDataSource() and then attach the DB to SQL Server by calling stored procedure 'sp_attach_db' through VC++ code.
Now on verification, the DB attached is not in read-only mode.
The problem is that why there is difference in behavior in both cases?
I want to get the sample DB attached in read-write mode in Ist case.
Hopefully waiting for ur response.
Thanks & Regards
Now that everyone helped me install SQL Server, it's time to use it... then...
I'm trying to work my through the MS Press book ADO.Net Step by Step. After installing the practice files, there is a step to attach the sample database provided. Within the folder which contains the sample files, I'm told to execute an app which I believe was called "Config.exe". This app brings up a form with 3 text-boxes, to collect the Server Name, Database Name, as well as the Database MDF Filename. There are also 2 buttons, "Attach" and "Detach".
This book assumes, that SQL Server Express is installed. In the book, the author does mention that if this isn't the case, to adjust the Server Name as necessary.
(The following do not include the quotes, but you probably already knew that...)
In the form mentioned above, the default Server Name is "(local)SQLEXPRESS",
I changed this to "(local)MSSQLSERVER".
The next text-box for Database Name contains: "AdoStepbyStep"
The last text-box for Database MDF Filename contains: "c:ADO.NET 2.0 SBSSampleDBsAdoStepbyStep_Data.MDF"
The path/spelling of the text in the above is indeed correct. Clicking the "Attach" button, results in the following:
--- ERROR ---
Function: AttachDB
Description: [Microsoft][ODBC SQL Server Driver][DBMSLPCN]InvalidConnection.
[Microsoft][ODBC SQL Server Driver][DBMSLPCN]ConnectionOpen (ParseConnectParams()).
I've never used SQL Server, so please any advice needs to be at a relatively elementary level. I've primarily been a mainframe programmer, so this is new to me.
Thanxxxxxxxxxxxxx in advance for any replies!!!
Hello,
I want to attach a database collation en-us to an instance ( downloaded as french ).
I would want to know if i may have known problems ( i want download databases samples in english only )
Sql Server 2005 Express SP2 with advanced services
Many thanks beforehand
Have a nice day
Hi. I would like to if its possible to take a Express ".mdf" file and attach it to a full blown SQL Server 2005?, to "attach" it to a real SQL Server 2005?. And how do i do this?. or do i have to do it since there is a "DataDirectory" directive that manage this for me in the connectionstring?, im a little newbie about this :)
View 1 Replies View RelatedI'm trying to see the differences between Backup/Restore and Attach/Detach. I backup and detach a database from SQL Server 2000 SP3 and then attach and restore it to SQL Server 2005 SP1.
The differences I noticed are:
1. The restored database has a much larger initial size (database size is same) for data and log.
2. The attached database has a last backup date
3. If the backup is restored over a database, the restored database is showing owned by the database owner of the database restored over but syslogins and sysusers do not match.
I don't understand why #1 happens.
Are there any other differences between Backup/Restore and Attach/Detach?
Thanks,
Peter
After i reinstall SQL Server 2005 Express on my local machine, and then tried to attach AdventureWorks_Data.mdf into Database, it gives me the following error:
Mark up:
I tried to reinstall the Adventureworks.msi installer and reattach again in SQL Server 2005 Express, it gave me the same error.
I then deleted both SQL Server 2005 Express & Adventureworks, and then restart my pc and reinstall again, it still gave me the same error.
Error:
Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum)
Additional Information:
An Exception occurred while executing a Transact-SQL Statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
CREATE FILE encountered operating system error 5(Access is denied.) while attempting to open or create the physical file 'C:Program FilesMicrosoft SQL ServerMSSQL.1DataAdventureWorks_Data.mdf' (Microsoft SQL Server, Error:5123)
I have an application which stores records on a local SQL Express and I need to move the records to a SQL 2000 database. I have the SQL 2000 server linked in the Express Management Console (under Linked Servers). I'm trying to use a stored procedure to accomplish this, but get an error "Invalid object name 'ngtxa4-rsmsz-01.newpurchase.tblRequest'." Express uses a table named tblTRequest in the TempPurchase database, while 2000 uses a table named tblRequest in a NewPurchase database. Here is the stored procedure I'm using:
USE [tempPurchase]
GO
/****** Object: StoredProcedure [dbo].[InsertRequestToMain] Script Date: 07/09/2007 08:54:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[InsertRequestToMain]
AS
BEGIN
INSERT INTO [ngtxa4-rsmsz-01].newpurchase.tblRequest
(fldRequestDate, fldRequiredBy, fldUserID, fldWorkAreaID, fldVendorID, fldClassID, fldEstimate, fldMemo, fldStatusID, fldStatusDate, fldSystemID,
fldtmpRequestID, fldUpdateCode)
SELECT fldRequestDate, fldRequiredBy, fldUserID, fldWorkAreaID, fldVendorID, fldClassID, fldEstimate, fldMemo, fldStatusID, fldStatusDate, fldSystemID,
tmpRequestID, UpdateCode
FROM tblTRequest
WHERE (fldHold = 0)
END
Any assistance with this would greatly be helpful. Thank you.
How can I export data from SQL2000 to XML?Is there any tools with SQL for that?I don't want to use "for xml explicit"...*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedCan multiple instances of SQL 2005 Express attach to the same database files on a network share? I have seen this done before with MSDE where the database files are stored on the server, but instead of having a SQL server running on the network and then connecting to it, only the database files exist on the network share and the users connect through MSDE running on the local machine. Is this possible with SQL2005Express? I do not have the ability to share an SQL instance from one workstation to another nor do I have the ability to install an instance on the corporate server. Is it as simple as creating the database and storing the files on the share then attaching the database to the SQL Instance on each workstation?
View 3 Replies View RelatedI recently posted this question to MSDN forum and was directed to re-ask it on this forum. Following are the question and answer I got.... >>>>>>>>>>I am trying to export a table from VWD into a CSV, MySQL or text file so I can transmit it to my hosting manager. They won't take it in as a .mdf - After browsing around on VWD Options & Help I can't find someting that specifically has export options for database.Anyone ? Answer :you maybe best asking the gurus over at the ASP.NET forums:http://forums.asp.netI think this would come from the database manager itself on options to export data, not within VWD however. Again, best to ask there
View 1 Replies View RelatedHi there,
I cannot seem to find a way to export a database model from Visio to Sql Server.
Can somebody provide a walkthrough how to export it?
Thanks a lot
I have to export data from SQL Server 2005 express to Access database. I have done many import/export using DTS package via SQL 2000. I don't have BI installed in my SQL SERVER 2005 Express. I understand that I have to use SSIS for sql server 2005. Any help is greatly appreciated.
View 1 Replies View Related
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
How can I Export Database with foreing Key and primary key.
Operation is that
SQL2005 Management Studio/Database/Tasks/Export Data
Before Version is SQL2000 we can Selected Copy Object and data between server and then Use Default Options click checked and Select Copy Index, Copy Foreing Primary key vs vs
But this options is not found in the SQL2005 Management Studio/Database/Tasks/Export Data wizard or I can't found it.
How can I export foreing Key and primary key with SQL2005 Management Studio/Database/Tasks/Export Data wizard.
Best Regards,
Athena.
An attempt to attach an auto-named database for file C:WebApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
My web.config file, the connection strings
<connectionStrings>
<add name="POAdatabaseConnectionString1" connectionString="Data Source=sss;Persist Security Info=True;Initial Catalog=POAdatabase.mdf;Integrated Security=SSPI" providerName="System.Data.SqlClient" />
</connectionStrings>
I cann't really find the statement for attaching aspnetdb.mdf. I don't where to find it. Is there any other web.config file in the C drive? Thanks for help!
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
I want to import a table and data in SQL 2005 to the table in the ASPNETDB mdf. Please help.
View 4 Replies View RelatedIs there any way to attach a SQL DB to SQL Server 2005 using VB.Net? If so can you also set security?
View 3 Replies View RelatedIs it possible to attach sdf file (SQL Server Compact Edition Database File) to sql server 2005 ent. edition?
Thanks in advance.
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which the company says works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get an error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
If I detach a database on a server, then attach the database with asingle file only using the data file...will I lose any transactionsthat were in the original log file? There is a debate going on here atwork where some people think that during the detach, transactions inthe log file are saved to the data file.Thanks!
View 4 Replies View RelatedI've created a database inside my ASP.net project, the database is in the App_Data folder as exepcted.I can't run the aspnet_regsql until I have attached it using SQL Server Management Studio, but when I try to attach the database it doesn't let me navigate through my folders properly. The database is in C:UsersWardieDocumentsFirstProjectApp_Data but SQL SMS only lets me navigate to the folder C:UsersWardie and no further for some reason, meaning I can't attach the database and can't use the aspnet_regsql service to create the membership tables.Does anyone know how to fix this?
View 3 Replies View RelatedHi guys,
I had user who would like attach trial database and de-attach database when he do development. I do not want him had any other permission except the database he attach. I give him database creator role. But it did not seems work. I have to give him database creator role and system admin role also. Any one have better ideas about this?
Thanks for help
Helen