Is there a way to restore a "single" object in SQL Server 2000? (I only need 1 table and 1 stored procedure restored -- however it appears as though I need to restore the ENTIRE DB to get to these!)
thx.
I opened SSMSexpress and attached to my sql 2005 database and automatically created the scripts for creating all the object in a SQL 2000 DB. The objects seem to be created but I did get script messages. Are these messages harmless?thanksMilton
Msg 208, Level 16, State 1, Procedure Requestview, Line 3
Invalid object name 'dbo.requests'.
Msg 15135, Level 16, State 1, Procedure sp_validatepropertyinputs, Line 147
Object is invalid. Extended properties are not permitted on 'dbo.Requestview', or the object does not exist.
Msg 15135, Level 16, State 1, Procedure sp_validatepropertyinputs, Line 147
Object is invalid. Extended properties are not permitted on 'dbo.Requestview', or the object does not exist.
Hello All,I am not a SQL Server expert, but I have been put in a prettyprecarious situtation and I am close to panicking :( I have need torestore a SQL database from backup (through Enterprise Manager). Thedatabase got corrupt and I detached it, then was unable to attach itagain. I created a new database with the same name and file names torestore to. When I go to All Tasks, restore, and restore from apreviously run full backup, it says "SQL Server is currently in theprocess of restoring the backup set," but the progress bar does notbudge. I look in the data folder and see the full sized transactionlogs (35GB I know, need to be shrunk). The .mdf file remains at 1024Kthough. Do I need to just wait longer? Normally when restoring from aSQL Server .BAK file, the progress is shown to me as it goes along. Ido not know what to do here. Any help would be GREATLY appreciated. Iapologize for sounding like a newbie, but with SQL Server, I amdefinitely in that category.Thanks,-D
View 1 Replies View RelatedDear all,
I have a backup for SQL server database.
It use differential backup.
I use following steps to restore the database to one of date's backup,because I want to monitor this date's data.
(1) restore a set of the complete backup first.
and select " Leave database nonoperational but about to restore additional transaction logs"
(2) restore one of date's backup, the backup number is 70.
if I restore the backup number by sequence after a set of complete backup is restore, it is ok
But I can not restore them by sequence,because there are many diffenential backup.
The error message is :
Cannot apply the backup on device 'c: empCk2006backup' to database 'CK2006'.
Restore database is terminating abnornally.
I have tried to use following choice :
Force restore over existing database
Leave database operational. NO additional tracsaction logs can be restored.
Leave database nonoperational but able to restore additional transaction logs.
Leave database read-only and able to restore addtional transaciton logs.
But it also failed to restore.
How should I do?
Thanks you
Hai friends.....
I am doing project in ASP.NET(vb) my backend is sql server 2000...in my PC..
I have another pc....where sql server 2000 is installed.....
i have nearly 50 tables...in sql server 2000. in my PC..
I want to backup these tables from my pc and another pc...
can u tell me the steps...
I will try immediately....
Ambrose......
Hi,
Any one know how to restore a SQL 2000 backup on to a server which has SQL 7.0??
Thanks,
Naveen
Hello!
I have a bug in SQL Server 2000 that I would like to discuss.
The bug is described briefly on http://support.microsoft.com/kb/821334.
"The potential for inconsistency in the backup history tables backupset and backupmediafamily is resolved. This issue may cause the restore process to point to the wrong backup files."
According to my experiences the bug is extremely serious. SQL Server backup and restore operations are not fully reliable. If you have a disaster situation there is a possibility that you can not perform a restore.
Technically a media_family_id is generated in a backup operation and inserted into msdb.dbo.backupmediafamily. What could happen is that a media_family_id, that already exists in backupmediafamily, is generated.
The bug is fixed from version 8.00.0859, but only if you have an special undocumented trace flag (3003) enabled.
Here is the information that I have got from Microsoft about this trace flag.
"Trace flag 3003 changes how SQL generates media_set_id for new backup files. It will guarantee that new media_set_id values in backupset table are unique when you create a new file with your backup. This is the only place in code where TF 3003 is used so it will not impact your SQL Server operations."
I have a SQL Server with 80 databases. I have a maintenance plan with full backup every 24 hours and log backup every 5 minutes.
The error happened on my server a few times every 24 hours. I believe it's a general problem.
Best regards
Ola Hallengren
scott writes "Hi!
I have been asked to write a DTS package that copies a database (call it DBOLD) to another database (call it DBNEW) every night. I do the following:
BACKUP DATABASE DBOLD_App
TO DISK = 'C:ackupDBOLD.bak'
WITH INIT
GO
Then I do the following:
RESTORE DATABASE DBNEW FROM DISK = 'C:ackupDBOLD.bak' WITH MOVE 'DBOLD_App_Data'
TO '... the new one .MDF', REPLACE,
MOVE 'DBOLD_App_Log' TO '... the new one.LDF', REPLACE
The RESTORE often (but not always) fails, particularly if 2005 Reporting Services has queried the data in DBNEW during the day. There should be no-one using the DBNEW overnight when the DTS package runs, so I have permission to "toss then overboard" if they are (note - DBNEW is effectively read-only, for reporting purposes, and is completely refreshed each night, so lost updates etc are not an issue).
How can I force the restore to proceed? I've tried dropping, detaching/attaching but the existing connection(s) apparently prevent this. I dont care about the contents of DBNEW as the data is conmpletely refreshed each night.
If you have any ideas I would be pleased to hear them...
Thanks in advance...Scott"
Of course I'll try this before I go live, but I figured I'd askhere first. I've read the docs, and the answer is unclear.My current backup strategy is:Take a full database backup occasionally (like, every two weeks).Back up logs every five minutes.This works, but restoring the database all the way through cantake a while, as I've sometimes spun through 800+ log restores.I'd like to change toTake a full database backup occasionally (like, every two weeks).Take a differential backup every day.Back up logs every five minutes.So, I'd have this set of backups after day twoFULLLOGS 1-100DIFFERENTIALLOGS 101-200When I go to restore, do I always have to doFULLDIFFERENTIALLOGS 101-200or can I doFULLLOGS 1-100LOGS 101-200?I guess what I'm really asking is: is there any reason to keepthe "old" logs around (in this case 1-100), if I assume I alwayshave the latest differential?I suppose I *might* need them to do a "point in time" restore,i.e.FULLLOGS 1-53.but assuming I never want to do that, can I discard the logsthat are earlier than my latest differential?
View 1 Replies View RelatedSorry for basic question, But i dont know more about SQL Server,
During Last weak , i have bought a new server with Plesk 7.6 that SQL Server 2000 Express is installed on it, I want to know how can i restore databases that comes from other servers, for example restore a SQL Server 2000 Express backup file on this server? is there any special software?
Another question is about changing Collation of a database how can i change collation of databases that i make with SQL Server 2000 Express?
Hi,
I've got a question regarding attaching/restoring of DBs and wonder if anyone could help me out.
Does SQL Server 2000 provide a functionality to attach/restore DB automatically? ie, some kind of polling service to attach/restore DB that were detached previously?
Thanks
Danny.
I have a database backup from Server Express 2005 that I want to restore to SQL Server 2000. I keep getting an error message saying it was created a newer version and wont work. Is there a workaround to this.
Thanks.
Hi All
I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Please help me to solve this problem. Thanks
Hi Friends,I have installed SQL server 2005 Express Edition and SQL Server managementI have a SQL server 2000 db backup file. I try create a new database in my SQL server 2005 express Edition and try restore that backup file from device, it only searching for file with *.bak and *.tm extension! I tried generate backup file with .bak extension and tried restore into SQl server 2005 express edition but still it is not allowing to do so! I also tried copy my database's data file and log file and paste it under SQL server 2005 express edition Data folder and still not able to read the tables.Is that any ways to do restoring for this SQL server 2000 backup file into SQL server 2005 express edition! Anybody can help me on this please...:eek:
View 2 Replies View RelatedHi Dear,
May Any one guide me?
I have a backup file of database which is in SQL Server 2000. it has no Extension.I want to restore this backupfile or this database in my SQL Server 2005.
I have tried to Attach Database or attach this backup file in Sql Server2005 but it also fails .
First I have created New database name as is on the backupfile and then I have also tried to rename this file with .bak extension and then try to restore again it fails.
Plese Guide me urgently........
:eek: :eek: :eek: :eek: :eek:
Hi All
This is a very urgent requirement of my client having 200 stores and one Head office. the HO has just installed SQL-Server 2005, The HO sends small backups of the data related to stock transfer which needs to be restored at stores. It was working find when both the HO and stores were SQL-Server 2000. but the process has come to a dead halt as the HO has SQL-Server 2005. It is not possible to convert the stores immediately. please help me out.
Thanks
Raoshan
I am maintaining a .net 1.0 asp.net web application that accesses a SQL server 2000 database. I need to backup the database and then restore it on a laptop. Currently it resides on a server. The problem is that on the server they are using sql server 2005. If I backup using 2005 and then try and restore this database using SQL server 2000 or 2005 on the laptop, I get an error message. "Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE DATABASE is terminating abnormally.
What can I do to restore the database? Must it be backed up with SQL server 2000 and then restored with SQL Server 2005?
Please help!
I was running Small Business Server 2003 with MS SQL Server 2000. I put backups of all my SQL Server 2000 databases on hard disk d: and the operating system and applications on c:/. I then reformatted c:/ (but left d:/ intact) and installed Windows XP Home. Then I installed MS SQL Server 2005 Developer's Edition.
I would like to now restore the backups of the SQL Server 2000 databases (still intact on drive d:/) to SQL Server 2005, but I get a variety of error messages.
I suspect that I am going about this the wrong way. I have done several hours of research in the documentation without success. I cannot attach the SQL Server 2000 database to SQL Server 2005 because it is a backup, not a database. I cannot migrate the databases as part of the installation of SQL Server 2005 because (a) they are back-ups, and (b) I don't have SQL Server 2000 installed when I install SQL Server 2005.
Is there a solution?
TIA
Mark Schreiner
I have a file backup database SQL Server 2000
I want to restore it to SQL Server 2005.
But it failed.
I try :
Database ( right-click) - Restore Database - From Device - Specify Backup Add
Locate Backup File. I must choose File of Type is All File so that i can find file backup from SQL 2000, if i choose File of Type is *.bak,*.trn so i cannot find that file.
And then i choose OK all. But it failed. The error is below :
Restore failed for Server 'DHBK-734D0C3663'. (Microsoft.SqlServer.Smo)
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLdataqlsach_Data.MDF" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
System.Data.SqlClient.SqlError: Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLdataqlsach_Data.MDF" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
We are attempting to restore one of our databases from a backup that went to a local drive on the server.
We see the backupset in the list but receive an error that it is not available when we try to use it. When we try to restore from device and select the files the drive letter is not available. When we attempt to enter the path to the file it can't locate it. We don't have space on our SAN to copy the backup there and we can't add the local drive to the cluster resources.
Is there a way to get this backup done?
I want restore database in my disk , but i cant . I've click and add from device. this is the screen. And when i click content , it show me this text : Object cannot be cast from DBNull to other types. (mscorlib) .
View 2 Replies View RelatedDoes any one has any clue for this error ? I did went through a lot of articles on this error but none helped . I am working in Visual studie 2005 and trying to upload image in sql database through a simple form. Here is the code
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
using System.Web.Configuration;
using System.IO;
public partial class Binary_frmUpload : System.Web.UI.Page
{protected void Page_Load(object sender, EventArgs e)
{
}protected void btnUpload_Click(object sender, EventArgs e)
{if (FileUpload.HasFile == false)
{
// No file uploaded!lblUploadDetails.Text = "Please first select a file to upload...";
}
else
{string str1 = FileUpload.PostedFile.FileName;
string str2 = FileUpload.PostedFile.ContentType; string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
//Initialize SQL Server Connection SqlConnection con = new SqlConnection(connectionString);
//Set insert query string qry = "insert into Officers (Picture,PictureType ,PicttureTitle) values(@ImageData, @PictureType, @PictureTitle)";
//Initialize SqlCommand object for insert. SqlCommand cmd = new SqlCommand(qry, con);
//We are passing Original Image Path and Image byte data as sql parameters. cmd.Parameters.Add(new SqlParameter("@PictureTitle", str1));
cmd.Parameters.Add(new SqlParameter("@PictureType", str2));Stream imgStream = FileUpload.PostedFile.InputStream;
int imgLen = FileUpload.PostedFile.ContentLength;byte[] ImageBytes = new byte[imgLen]; cmd.Parameters.Add(new SqlParameter("@ImageData", ImageBytes));
//Open connection and execute insert query.
con.Open();
cmd.ExecuteNonQuery();
con.Close(); //Close form and return to list or images.
}
}
}
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error:
Line 32:
Line 33: string str2 = FileUpload.PostedFile.ContentType;
Line 34: string connectionString = WebConfigurationManager.ConnectionStrings["GSGA"].ConnectionString;
Line 35:
Line 36: //Initialize SQL Server Connection Source File: c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs Line: 34
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Binary_frmUpload.btnUpload_Click(Object sender, EventArgs e) in c:UsersManojDocumentsVisual Studio 2005WebSitesGSGABinaryfrmUpload.aspx.cs:34
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
When I try and run Report Builder Reports i get this error message "Object reference not set to an instance of an object. "
I can run reports locally but not from Report manager
here is the stack trace info
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces) +18
Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e) +358
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +482
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +958
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
Hi all,
I'm getting this problem 'Object reference not set to an instance of an object.' whenever I try to review a report and I checked the log file and this is what it had
w3wp!ui!1!11/14/2006-10:54:20:: Unhandled exception: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Reporting.WebForms.WebRequestHelper.GetExceptionForMoreInformationNode(XmlNode moreInfo, XmlNamespaceManager namespaces)
at Microsoft.Reporting.WebForms.WebRequestHelper.ExceptionFromWebResponse(Exception e)
at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Some previous forums stated checking the webconfig file but the web config file look okay. Is there another way to fix this.
Much Thanks,
Carl
for disastor recovery purposes i have a user request to restore a sql server 6.5 base backup(.dat file) into sql server 7.0 or 2000. can this be done in a restore on a different server?? all servers are windows 2000
View 3 Replies View RelatedIn Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
I have a web application that I am rebuilding. I have many picture files that want to take off the file system and move into SQL as a blob. I will create an index of uids against the file names but need a good way to bulk add the files to the database... any hints on code or tools would be a great help.
Thanks
Bill
I used to rely heavily on the sysobjects.crdate under mssql 6.5 to identify the last time an object was updated (primarily sprocs, but also tables and views). With the Sql7 Alter command, there doesn't seem to be any easy way to tell the last time an object was changed. Is this data stored out on any of the system tables/information views?
View 1 Replies View RelatedHi
I'm trying to copy a s2k db to s2005 64 bit db.
I setup the copy db as a schedule but it keeps failing which invalid object name which i think would suggest that the import table is not there?? even thought it is there I have checked the structure of the table which looks fine.
Does anyone have any ideas to get around this?? Or can I do some other checks?
Many Thanks
Robert
OnError,SEA-SRV-00009,NT AUTHORITYSYSTEM,sea-srv-00008_SEA-SRV-00009_Transfer Objects Task,{524DBB9C-783A-4989-8239-7825B10BF060},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,0,0x,ERROR : errorCode=-1073548784 description=Executing the query "
CREATE view [dbo].[vw_tf_stock_take_scanned] as
select dbo.i_st_stakedt.inputref, dbo.i_st_stakedt.whse, dbo.i_st_stakedt.stockcode, dbo.i_st_stakedt.ticketref,
dbo.i_st_stakedt.bin, dbo.i_st_stakedt.checkqty, dbo.i_st_stakedt.updated, dbo.i_st_stakedt.status,
dbo.i_st_stakedt.createdon, dbo.i_st_stakedt.createdat, dbo.i_st_stakedt.filler
from dbo.i_st_stakedt inner join
dbo.i_st_stakehd on dbo.i_st_stakedt.inputref = dbo.i_st_stakehd.inputref
where dbo.i_st_stakehd.status not in ('X','P')
" failed with the following error: "Invalid object name 'dbo.i_st_stakedt'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
helpFile= helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
StackTrace: at Microsoft.SqlServer.Management.Dts.DtsTransferProvider.ExecuteTransfer()
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSMOTransfer()
OnError,SEA-SRV-00009,NT AUTHORITYSYSTEM,SAS_mig,{40DA50FD-2E47-4B84-99D8-6FFDB0A4DD8D},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,0,0x,ERROR : errorCode=-1073548784 description=Executing the query "
CREATE view [dbo].[vw_tf_stock_take_scanned] as
select dbo.i_st_stakedt.inputref, dbo.i_st_stakedt.whse, dbo.i_st_stakedt.stockcode, dbo.i_st_stakedt.ticketref,
dbo.i_st_stakedt.bin, dbo.i_st_stakedt.checkqty, dbo.i_st_stakedt.updated, dbo.i_st_stakedt.status,
dbo.i_st_stakedt.createdon, dbo.i_st_stakedt.createdat, dbo.i_st_stakedt.filler
from dbo.i_st_stakedt inner join
dbo.i_st_stakehd on dbo.i_st_stakedt.inputref = dbo.i_st_stakehd.inputref
where dbo.i_st_stakehd.status not in ('X','P')
" failed with the following error: "Invalid object name 'dbo.i_st_stakedt'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
helpFile= helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
StackTrace: at Microsoft.SqlServer.Management.Dts.DtsTransferProvider.ExecuteTransfer()
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSMOTransfer()
OnProgress,SEA-SRV-00009,NT AUTHORITYSYSTEM,sea-srv-00008_SEA-SRV-00009_Transfer Objects Task,{524DBB9C-783A-4989-8239-7825B10BF060},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,0,0x,Database transfer failed for 1 database(s).
OnProgress,SEA-SRV-00009,NT AUTHORITYSYSTEM,sea-srv-00008_SEA-SRV-00009_Transfer Objects Task,{524DBB9C-783A-4989-8239-7825B10BF060},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,100,0x,Transfer objects finished execution.
OnTaskFailed,SEA-SRV-00009,NT AUTHORITYSYSTEM,sea-srv-00008_SEA-SRV-00009_Transfer Objects Task,{524DBB9C-783A-4989-8239-7825B10BF060},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,0,0x,(null)
OnPostExecute,SEA-SRV-00009,NT AUTHORITYSYSTEM,sea-srv-00008_SEA-SRV-00009_Transfer Objects Task,{524DBB9C-783A-4989-8239-7825B10BF060},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,0,0x,(null)
OnWarning,SEA-SRV-00009,NT AUTHORITYSYSTEM,SAS_mig,{40DA50FD-2E47-4B84-99D8-6FFDB0A4DD8D},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,-2147381246,0x,SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
OnPostExecute,SEA-SRV-00009,NT AUTHORITYSYSTEM,SAS_mig,{40DA50FD-2E47-4B84-99D8-6FFDB0A4DD8D},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,0,0x,(null)
PackageEnd,SEA-SRV-00009,NT AUTHORITYSYSTEM,SAS_mig,{40DA50FD-2E47-4B84-99D8-6FFDB0A4DD8D},{91AA3955-85BF-4DA1-B2BC-0A14787BE06D},11/2/2007 11:02:24 PM,11/2/2007 11:02:24 PM,1,0x,End of package execution.
I am trying to restore a database that was backed up in SQL 2000 to our server which is running SQL 7.0 and I'm getting an error message. Is there a compatibility issue and if it is how can I resolve it?
Thanks
I have encountered a slight problem restoring a SQL Server 7 database to Server 2000.
In some of the tables, all records are duplicated.
When I try to delete them naturally I get an error "Too many rows were affected by update". What are my options here?
Hi everyone,
Can you let me know, how to restore a database backup of sql 2000 into sql 7.0. If it is explain me the process of it.
Thanks
Jagannath
Hi all,
Can someone tell me if I could get db dumps from sql server 6.5 and restored them into SQL Server 2000 Enterprise Edition Server.
If yes, could you please tell me the trick to achive this.
Regards
Uday