Can I Return A Value In A Variable From A SSIS Program Back To C# After The SSIS Program Is Run From C#?
May 21, 2007Can I return a value in a variable from a SSIS program back to C# after the SSIS program is run from C#?
View 1 Replies
ADVERTISEMENT
Can I Read What Is In A SSIS Variable From Within A C# Program That Executed It?
May 21, 2007Can I read what is in a SSIS variable from within a C# program that executed it?
View 3 Replies View RelatedHow To Run A Console Program In Ssis?
Aug 3, 2007I need to execute a console program and capture its output.
What's the best way to do it?
(no xp_cmdshell approach)
Thanks,
SSIS And Program Redistributable
Oct 9, 2007I wrote program which connect to some remote MS SQL Server 2005, create SSIS package and store it to drive. Also it have ability to load SSIS package from drive, connect to server, load the SSIS package to specified server and execute it. Obviously, I used references to SSIS dlls in program. Question is - is SQL2005 necessary to be installed on computer where I execute the program? Since the program works with remote SQL Servers, I think what only some dlls is necessary for the program. Is it so?
View 12 Replies View RelatedProblem Running SSIS From C# Program.
Mar 13, 2007I am able to run it from the file system but when I try running it from SQL Server I get an error message that it cannot load package. I am using the following code.
Package package = app.LoadFromSqlServer("trans_hist", Properties.Resources.dbServerName, Properties.Resources.userId, Properties.Resources.password, null);
Kicking SSIS Package Off Using C# Program
Feb 28, 2008Hello,
I was wondering if it was possible to execute a package using a C# program. Can I use dtexec? How does this work?
Thanks.
To Program Between The Process Of Load Of Data In SSIS
Jun 23, 2006It is possible to program part of the process of load of data within the SSIS. The origin is a Flat file (.txt and .dat) and the destiny a SQL Server 2005. All the fields of the file are not mapean origin with the destiny table and data are needed other tables that are in the Data Base.
View 1 Replies View RelatedIntegration Services :: Running A Program Remotely From SSIS
Jun 9, 2015we run std 2008 r2. I'll be putting together a pkg whose last step needs to execute a program that resides on a remote (not same as where pkg runs) computer and that program must run on the remote computer. Return code(s) would be important to the pkg. I see talk about running over http which may or may not be possible with that remote ws 2003 sp2 server.
The pkg will be running on a ws 2008 r2 std sp1 machine.Does the community have any recommendations for running a remote program from ssis?
As I think about it, i'm not a big fan of making a pkg wait for another process synchronously. So I may just want to trigger the remote program and let something I would set up on the remote server tell me daily if the program succeeded. Interestingly this is a rewrite of a pentaho job that does wait for the remote program execution. I suppose installing ssis on that remote server is an option but I think i'd get a lot of resistance going that route. I'll probably be triggering a sql agent to ssis job after that remote program finishes.
Integration Services :: Call SAP RFC Program From SSIS Package
Sep 30, 2015How do we connect and get data from SAP database using SSIS 2012/2014.Currently we are extracting data using WebService, and BAPI function call for RFC, but it seems not so much reliable, due to timeout and others. ion providing the link for download of .NET Framework Data Provider for mySAP Business Suite and some sample to invoke and get the data using SSIS.
View 5 Replies View RelatedDo Sqlexception Breaks The Functionality Of The Program? (program Flow)
May 23, 2007why we use sql exceptions ...
what the program will do if we caught that exception .. i need some suggestions ... i got this exception(String or binary data would be truncated.
The statement has been terminated.).. will it affect the functionality of the program...
hiow can i avoid this exception..
How To Return A Set Of Data To The Calling Program
Jul 9, 2007hi,
i am new to SQL. i am trying to retrieve a set of data(i.e. set of rows which satisfies my condition given in the select statement). i want to output this recordset to my calling program i.e C#.net. how could i do this. i was adviced to use temp tables. but i am not sure how to do it. can any one say that using the temp table is the correct way. if so can u give me some sample code.
my proble is
Table name: ProductDetails Table
It has following columns
ProductID Name UnitPrice Category Stock
when i give a category value from front end it should bring me the rows which comes under the given category. there will be many rows under this category. how could i send this set of rows back to my calling program.
regards,
Johny
Help Sending A Variable From A C# Program To A SQL Query Using The Configuration Wizard In Visual Studio 2008
Apr 29, 2008I am trying to send a variable selected by the user and have all of the results that match that selection show in a datagridview. I tried using this query but it gives me not result.
//code
SELECT wasteDate, wasteFeed, wasteLbs
FROM tbWaste
WHERE (wasteDate = 'date1')
//code
date1 is being set by a datetimepicker
I am getting no results when I run the program
I have tried out every different combination of ways of coding it i can think of
if anyone can help it would be greatly appriciated.
SSIS: Problem Mapping Global Variables To Stored Procedure. Can't Pass One Variable To Sp And Return Another Variable From Sp.
Feb 27, 2008I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
SSIS Hard Time Getting Back XML Return Data From Stored Procedure Call Executed By Execute SQL Task
Aug 9, 2006I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
How To Get A Variable Value Return Back From A Child Package ?
Sep 29, 2006I have a parent package (i.e. P) and a child package (C). I was able to easily pass a variable value from P to C. And C did computations and get a result (i.e. integer) and stored this integer to a variable (x).
Now I want the value of "x" to be passed back to P and store in P's variable (say Px). Anyone knows how to ?
Thanks
Steve
Help In Program
Aug 29, 2001i have a program which should give the out like this
XAPIALTMKT20010829105525.TXT
but its giving the output = 'X'
which is just the first initial...how
can i get this...
if i don't write the @filename=....
only then its giving the output..but i want to store it in the
varable..how can i do that
================================
declare
@v datetime ,
@filename varchar
select @v=getdate()
select @filename='XAPIALTMKT'
+CONVERT(varchar, @v, 112)
+SUBSTRING(CONVERT(varchar, @v, 108), 1, 2)
+SUBSTRING(CONVERT(varchar, @v, 108), 4, 2)
+SUBSTRING(CONVERT(varchar, @v, 108), 7, 2)
+'.TXT'
print @filename
================================================
thanks,
Harish
Get With The Program
Jul 23, 2005It is very interesting to me that most people in this group can't do simpleSQL. Are you viewing MySQL as a simple file system?As long as you do that,you willnot understand SQL in any dialect. So from now on:When you have a question about SQL. post the table structures. Uh, "WithCreate".Post some sample data in the form of INSERTS.Regards,Rich--The journey is the reward.
View 2 Replies View RelatedSQL Program Question
May 22, 2006Hello, i installed :
SQL Server 2005 Express Edition with Advanced Services
Install Microsoft SQL Server 2005 Express Edition with Advanced Services
but I do not see any program in my program menu to open it. Is this a stand alone program I can open? Thanks
Mailsend Program
Oct 10, 2007Hi All,
I am trying to send an email from a cmd prompt from SQL Server 2005 server using mailsend program. I am getting the message "Could not send mail". I am really stumped, don't know how to fix it. Any suggesstions?
Thanks.
Mailsend Program
Oct 9, 2007Hi All,
I have installed SQL Server 2005 and created a job. I made the job failed to test the mailsend program. The notification step that uses the mailsend succeeded but I did not get an email. I am using mailsend program on SQL Server 2000 and it works fine. I am really stomped and don't know what to do to fix it?
Thanks.
Is It This Job Can Program In Trigger?
May 14, 2008I've have following table,
tblHIT - this table will reveive record every minutes
Date | Time | Main_ID | Hit
------------------------------------
3/1/2006 | 100 | 200 | 8700
...
...
...
4/14/2008 | 100 | 200 | 4500
4/14/2008 | 100 | 201 | 8700
4/14/2008 | 200 | 200 | 3500
4/14/2008 | 300 | 201 | 7700
...
...
I've also 1 job in SQL Server Agent will execute STORED PROCEDURE and will filter 7 days record before from current date and insert it into tblHIT_7days. tblHIT_7days shown as follow
tblHIT_7days
Date | Time | Main_ID | Hit
------------------------------------
3/7/2008 | 100 | 200 | 8700
...
...
...
4/13/2008 | 100 | 200 | 4500
4/13/2008 | 100 | 201 | 8700
4/13/2008 | 200 | 200 | 3500
4/13/2008 | 300 | 201 | 7700
I've plan to create TRIGGER. This TRIGGER will insert the appropriate record from tblHIT into tblHIT_7days and also delete a appropriate record in tblHIT_7days. This INSERT and DELETE transaction depend on current date.
Is it possible, TRIGGER can do this?
Triggers - C# Program
Oct 12, 2007Hi,
In SQL Server is it possible to have a trigger that will throw an event which could be caught by C# program running in the back ground?
Is this even possible? If it is, have u any links to help/examples?
Regards!
Using Sql Server In DB Program
Oct 26, 2006I am about to build a program that will require the use of DB. In the pass I used Access as my back end, but this time I would like to use Sql Server. I just have a few questions before I begin.
1. After deploying and installing my program, do I need to have sql server installed on users system or can the DB file exist on its own and just use ADO.NET to access the file? (As I done in the pass to access my Access mdb file)
2. If I can deploy a sql file -- can it be done with Sql Server Express?
3. If it can't be done, what db program should I use?
Program Locking Up While Using Rda
Apr 15, 2008On some occasions when trying to send data back to the server, the program will lock up for up to 30 minutes. The code below is the rda data transfer process and the function IsConnected() determines whether there is a connection.
If Not MainFrm.IsConnected Then
rda.ConnectionManager = True
End If
If MainFrm.IsConnected Then
Dim sCon As String = "Provider=SQLOLEDB;Data Source=175.21.21.121;Initial
Catalog=OurDb;User ID=UserId;Password=pwd"
rda.InternetUrl = "http://Ourwebsite.co.uk/tfr/sqlcesa30.dll"
rda.LocalConnectionString = "Data Source=Program FilesSysdata.sdf"
For i As Integer = 0 To RecCount - 1
Try
rda.SubmitSql(UpdateRec(i, 0), sCon)
Catch Ex As SqlCeException
ErrTxt = Ex.ToString
End Try
Next
Public Shared Function IsConnected() As Boolean
Dim request As HttpWebRequest
Dim response As HttpWebResponse
Try
request = CType(WebRequest.Create("http://www.intel.com/"), HttpWebRequest)
response = CType(request.GetResponse(), HttpWebResponse)
If response.StatusCode = HttpStatusCode.OK Then
response.Close()
Return True
Else
response.Close()
Return False
End If
Catch Ex As WebException
Return False
End Try
End Function
There are rda properties which determine a timeout. How can I use these to stop my program from locking up if the signal is weak?
ASP.NET,Gettting Error In The Program
Jan 4, 2007Hi,
please have look into the code and let me know the solution plz.
string ProID;
try
{
using(SqlConnection conn=new SqlConnection(source))
{
conn.Open();
DataSet ds=new DataSet();
DDLProject.Items.Clear();
SqlCommand cmd=new SqlCommand("SP_ProjectSelect",conn);
cmd.CommandType=CommandType.StoredProcedure;
cmd.Parameters.Add("Name",SqlDbType.NChar,30,"@Name");
cmd.UpdatedRowSource=UpdateRowSource.None;
cmd.Parameters["Name"].Value=DDLProductLine.SelectedItem;
SqlDataReader dr=cmd.ExecuteReader(); ------------->>>> Here iam getting Following Error.
while(dr.Read())
{ Response.Write(dr["ID"].ToString());
}
}
}
catch(System.Exception ex)
{
Response.Write(ex);
}
Error:
System.InvalidCastException: Object must implement IConvertible. at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.ExecuteReader() at MIS.UI.ResourceList.DDLProductLine_SelectedIndexChanged(Object sender, EventArgs e) in c:inetpubwwwrootdotnet pgmsmisui
esourcelist.aspx.cs:line 121
Any suggestion plzz,where went wrong.
Thanks in advance
Regards
Mahesh Reddy
Use Sql 2005 To Program Against Sql 2000
May 15, 2007I have sql server 2005 (full version) installed on my local machine, while the databases (on the server) I want to program against are in sql 2000. Could I program against sql 2000 databases using sql 2005? If yes, what do I need to know before I start doing that? Any suggestions are welcome.
View 1 Replies View RelatedProblem With Update Program
May 29, 2008I have written this Program For Updating the profile Information .At the Page_Load Event I read the profile information from the database and write it in the respective Textboxes .At the Button_Click event I have written a program to Update the data from the respective Textboxes.The program executes but doesnot updates .public partial class CreateProfile : System.Web.UI.Page{ SqlConnection con; SqlCommand com; string un = HttpContext.Current.User.Identity.Name; protected void Page_Load(object sender, EventArgs e) { con = new SqlConnection("Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Profiledata.mdf;Integrated Security=True;User Instance=True"); com = new SqlCommand("select * from profiletable where username='" + un + "' ", con); DataSet ds = new DataSet(); SqlDataAdapter da = new SqlDataAdapter(com); SqlCommandBuilder cb = new SqlCommandBuilder(da); DataTable dt = new DataTable(); da.Fill(ds); dt = ds.Tables[0]; Textname.Text = dt.Rows[0][1].ToString(); com.Cancel(); } protected void Button2_Click(object sender, EventArgs e) { con = new SqlConnection("Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\Profiledata.mdf;Integrated Security=True;User Instance=True"); con.Open(); com = new SqlCommand("update profiletable set name='" + Textname.Text + "' where username='" + un + "' ", con); com.ExecuteNonQuery(); com.Cancel(); con.Close(); }} Plz help me with this program........................
View 4 Replies View RelatedRunning SQL In A Batch Program
Apr 6, 2001I need to create a program that will run Client Access to download data from the AS400 to a flat file, then run SQL DTS to import the data into a table for use by another software package.
I've created a bat file that does that using the CA RTOPCB command and the SQL DTSRUN utility. Problem is that it appears that I need to first check to see if there is a table in SQL and if there is to delete it. Otherwise, rather than overlay the existing data in the table it adds to it.
Is there a way to issue a SQL drop table in DOS? Or am I missing something that could be done in SQL?
The DTSRUN is using a local package and CA is using a transaction request.
Rapid Program Design
Mar 8, 2001does anyone know of tools that allow free format screen design, easily programmable data validation and prgramming for use with SQL. I am used to using 4GL languages and want to avoid low level programming. For example to fifind a record and display the details i am used to a line of code that would allow the data field to do the find on to be entered and the next line of code would say find fieldname using index name and the results displayed
please say yes !!!
Get Password To Start A Program
Apr 3, 2003I have this Visual Basic program that if you are already logged into the application, the program get the username and password automatically to run the program. If the user runs the program not logged into the application, the program prompts username and password.
I need to know the T-SQL statement that will get the username and password when the user is already logged into the application. Basically I have the username part but the password keeps coming back as NULL and will not allow program to run.
Please help.
Sharon
Keyword Search Program
Sep 11, 2003Hi,
I am in the middle of developing procedure for keyword search for our website.
Input parameter is a string consisting keywords in comma delimited format.
This is the example of data I get from business group which I use to populate my key_search table.
product_id keyword
1 Microsoft, training
1CA, DBA
1CA, developer
1CA, network admin
1AZ, DBA
1AK, developer
1MN, DBA
1MN, developer
1OH, developer
2Microsoft, training
2AZ, DBA
2AZ, developer
2IL, developer
2MN, DBA
2CA, developer
2NY, business analyst
2NY, DBA
2NY, developer
2NY, programmer
3Oracle, training
3finance
4Oracle demo
4logistic
4Oracle Financials
4Financial Analyzer
They have provided search string examples like 'Microsoft, DBA, CA'
or 'CA'
or 'Microsoft, developer' or 'training'
I have script ready to remove comma from the string and store words from the input string in a temporary table.
But this is the easiest part.
The Confusing part now for me is to write the optimal code for retrieving the exact match from the key_search table as there is no limit on how many words can be in the string, it can be 1, 2, 3 or more.
Any suggestions on how should I handle this search?
Problems With SQL Server 2K And VB Program
Jun 27, 2001Hi,
My company has recently migrated our Informix database to SQL server 2K. The data is successfully migrated and the client are able to connect to the database. However, when trying to run a VB application to access the data, it keeps on prompting for SQL server login whenever an sql statement is executed. What could be the problem? We are using SQL server 2k on Windows 2000 and on the client Windows 95. Thanks!
Bulk Copy Program
Jun 11, 2004Hi Techies,
I have a bcp which generates .txt file perfectly. I just wanted to know how can i generate a text file in distributed environment.
Assuming that my Sql Server is running in machine A. I wanted the bcp to generate in Machine B. What are the permission's i should give in order to generate it in Machine B.
Regards
--Tanveer