Hi, all here,
I am having a question-is it possible to update several columns using CASE expression in SQL language? like if I wanna set each CASE for each column.
Thanks a lot in advance for any help and guidance.
I am relatively new to complex queries and need creating a query using a CASE in order to update columns to be either A or B. A few things about this is that I am joining tables from linked servers as well. This is the last part. I execute the query and receive the error:
Incorrect syntax near the keyword 'from'.
select (select FirstName from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as supervisorFirstName,
(select LastName from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as supervisorLastName,
(select PersonID from [ZZZXXX].HCM.dbo.tPerson where PersonGUID = tPersonJobHistAlias.SupervisorPersonGUID) as SupervisorEmployeeID,
[Code] .....
I want to update multiple column in one table using with case statement. i need query pls..
stdidnamesubject result marks
1 arun chemistry pass 55
2 alias maths pass 70
3 babau history pass 55
4 basha hindi NULL NULL
5 hussain hindi NULL nULL
6 chandru chemistry NULLNULL
7 mani hindi NULLNULL
8 rajesh history NULLNULL
9 rama chemistry NULLNULL
10 laxman maths NULLNULL
Hi,
I get the following issue:
Server: Msg 125, Level 15, State 4, Line 16
Case expressions may only be nested to level 10.
I need to create a stored procedure that looks at two fields to generate a rating depending on each value. I have tried to use a case statement but am restricted to a certain number of nesting levels. Is there a way around this?
Code Snippetselect answerID,ram_severity, ram_probability,
case when ram_severity='0' and ram_probability='A' then 10
else case when ram_severity='0' and ram_probability='B' then 10
else case when ram_severity='0' and ram_probability='C' then 10
else case when ram_severity='0' and ram_probability='D' then 10
else case when ram_severity='0' and ram_probability='E' then 10
else case when ram_severity='1' and ram_probability='A' then 10
else case when ram_severity='1' and ram_probability='B' then 10
else case when ram_severity='1' and ram_probability='C' then 10
else case when ram_severity='1' and ram_probability='D' then 10
else case when ram_severity='1' and ram_probability='E' then 10
else case when ram_severity='2' and ram_probability='A' then 10
else case when ram_severity='2' and ram_probability='B' then 10
else case when ram_severity='2' and ram_probability='C' then 10
else case when ram_severity='2' and ram_probability='D' then 100
else case when ram_severity='2' and ram_probability='E' then 100
else case when ram_severity='3' and ram_probability='A' then 10
else case when ram_severity='3' and ram_probability='B' then 10
else case when ram_severity='3' and ram_probability='C' then 100
else case when ram_severity='3' and ram_probability='D' then 100
else case when ram_severity='3' and ram_probability='E' then 1000
else case when ram_severity='4' and ram_probability='A' then 10
else case when ram_severity='4' and ram_probability='B' then 100
else case when ram_severity='4' and ram_probability='C' then 100
else case when ram_severity='4' and ram_probability='D' then 1000
else case when ram_severity='4' and ram_probability='E' then 1000
else case when ram_severity='5' and ram_probability='A' then 100
else case when ram_severity='5' and ram_probability='B' then 100
else case when ram_severity='5' and ram_probability='C' then 1000
else case when ram_severity='5' and ram_probability='D' then 1000
else case when ram_severity='5' and ram_probability='E' then 1000
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
end
as rating
from table ua
Im sure there must be a way I just cant find it yet. Many thanks in advance
I have a query which works absolutely fine when connecting to an actual server:
WITH CLAIMDATA AS(
SELECT DISTINCT
DB_NAME() AS DBName,
'UA' AS Client,
POLICY AS KMPONO,
[code]...
If i change the connector to REPLPROD (which is a linked server): From REPLPROD.XUNMDTAUAI.dbo.UPPOREP UP INNER JOIN REPLPROD.XUNMDTAUAI.dbo.UKKMREP UK
I get the error:
Msg 8180, Level 16, State 1, Line 1
Statement(s) could not be prepared.
Msg 125, Level 15, State 4, Line 1
Case expressions may only be nested to level 10.
All,
I have seen it happen frequently that I type in a perfectly valid SSIS expression (this is easy for me since I am an old hand at C++/C/C#) in a row in a Derived Column transformation, and it turns red. Or sometimes, I will have an invalid expression that I correct, but it stays red. Finally I have also seen it happen that I make some change in the data flow pipeline and suddenly a Derived Column transform develops an error. I then go into the Derived Column transform and find that the expression has turned red. So, I literally have to go into the expression in these cases, and make a trivial change to them to get the red error to go away. Alternatively, I can cut the derived column expression text, and then paste it back in and it works (this is most telling.)
So, it seems to me the Derived Column is somehow holding onto some meta data about the Derived Column that is getting out of date (rather than re-evaluating the correctness of the Expression.) One thing I usually can do to repro this at times is to remove a column (that the Derived Column depends upon) from the pipeline and then re-add it. When I go into the Derived Column it will be red, and then like I said I have to tweak the expression to force SSIS to re-evaluate the expression.
Anyway, I'm curious if anyone else has seen this?
Thanks.
Trying to setup a derived column to use an expression stored in a package variable. But it seems that variables are always evaluated as text...I need it to evaluate as a Columname sometimes.
Example:
On an ETL of Products I want a new derived column that uses two other columns.
I can hardcode an expression of ProductID + " - " + ProductName and that results in dynamic output. But now I want to use that as an expression stored in a variable so I can change it when needed.
So I make that expression = @[User::Variable]
and stuff into @variable ( a string param) : ProductID + " - " + ProductName
My output is the literal "ProductID + " - " + ProductName", and not the actual ID's and Names
I've tried with/without brackets, quotes and braces but no change.
Any way I can get the pieces in that variable expression to evaluate as column names?
I want to have this query insert a bunch of XML but i get this error...
Msg 128, Level 15, State 1, Procedure InsertTimeCard, Line 117
The name "ExpenseRptID" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Msg 128, Level 15, State 1, Procedure InsertTimeCard, Line 151
The name "DateWorked" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
What am i doing wrong...Can anyone help me out!! Thanks!!
p.s I know this query looks crazy...
Code Block
IF EXISTS (SELECT NAME FROM sysobjects WHERE NAME = 'InsertTimeCard' AND type = 'P' AND uid=(Select uid from sysusers where name=current_user))
BEGIN
DROP PROCEDURE InsertTimeCard
END
go
/*********************************************************************************************************
** PROC NAME : InsertTimeCardHoursWorked
**
** AUTHOR : Demetrius Powers
**
** TODO/ISSUES
** ------------------------------------------------------------------------------------
**
**
** MODIFICATIONS
** ------------------------------------------------------------------------------------
** Name Date Comment
** ------------------------------------------------------------------------------------
** Powers 12/11/2007 -Initial Creation
*********************************************************************************************************/
CREATE PROCEDURE InsertTimeCard
@DateCreated DateTime,
@EmployeeID int,
@DateEntered DateTime,
@SerializedXML text,
@Result int output
as
declare @NewTimeCardID int
select @NewTimeCardID = max(TimeCardID) from OPS_TimeCards
-- proc settings
SET NOCOUNT ON
-- local variables
DECLARE @intDoc int
DECLARE @bolOpen bit
SET @bolOpen = 0
--Prepare the XML document to be loaded
EXEC sp_xml_preparedocument @intDoc OUTPUT, @SerializedXML
-- check for error
IF @@ERROR <> 0
GOTO ErrorHandler
--The document was prepared so set the boolean indicator so we know to close it if an error occurs.
SET @bolOpen = 1
--Create temp variable to store values inthe XML document
DECLARE @tempXMLTimeCardExpense TABLE
(
TimeCardExpenseID int not null identity(1,1),
TimeCardID int,
ExpenseRptID int,
ExpenseDate datetime,
ProjectID int,
ExpenseDescription nvarchar(510),
ExpenseAmount money,
ExpenseCodeID int,
AttachedRct bit,
SubmittoExpRep bit
)
DECLARE @tempXMLTimeCardWorked TABLE
(
TimeCardDetailID int not null identity(1,1),
TimeCardID int,
DateWorked DateTime,
ProjectID int,
WorkDescription nvarchar(510),
BillableHours float,
BillingRate money,
WorkCodeID int,
Location nvarchar(50)
)
-- begin trans
BEGIN TRANSACTION
insert OPS_TimeCards(NewTimeCardID, DateCreated, EmployeeID, DateEntered, Paid)
values (@NewTimeCardID, @DateCreated, @EmployeeID, @DateEntered, 0)
-- check for error
IF @@ERROR <> 0
GOTO ErrorHandler
--Now use @intDoc with XPATH style queries on the XML
INSERT @tempXMLTimeCardExpense (TimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep)
SELECT @NewTimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep
FROM OPENXML(@intDoc, '/ArrayOfTimeCardExpense/TimeCardExpense', 2)
WITH ( ExpenseRptID int 'ExpenseRptID',
ExpenseDate datetime 'ExpenseDate',
ProjectID int 'ProjectID',
ExpenseDescription nvarchar(510) 'ExpenseDescription',
ExpenseAmount money 'ExpenseAmount',
ExpenseCodeID int 'ExpenseCodeID',
AttachedRct bit 'AttachedRct',
SubmittoExpRep bit 'SubmittoExpRep')
-- check for error
IF @@ERROR <> 0
GOTO ErrorHandler
-- remove XML doc from memory
EXEC sp_xml_removedocument @intDoc
SET @bolOpen = 0
INSERT OPS_TimeCardExpenses(TimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep)
Values(@NewTimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep)
select @NewTimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep
from @tempXMLTimeCardExpense
-- check for error
IF @@ERROR <> 0
GOTO ErrorHandler
-- For time worked...
INSERT @tempXMLTimeCardWorked(TimeCardID, DateWorked, ProjectID, WorkDescription, BillableHours, BillingRate, WorkCodeID, Location)
SELECT @NewTimeCardID, DateWorked, ProjectID, WorkDescription, BilliableHours, BillingRate, WorkCodeID, Location
FROM OPENXML(@intDoc, '/ArrayOfTimeCardWorked/TimeCardWorked', 2)
WITH ( DateWorked DateTime 'DateWorked',
ProjectID datetime 'ProjectID',
WorkDescription nvarchar(max) 'WorkDescription',
BilliableHours float 'BilliableHours',
BillingRate money 'BillingRate',
WorkCodeID int 'WorkCodeID',
Location nvarchar(50)'Location')
-- check for error
IF @@ERROR <> 0
GOTO ErrorHandler
-- remove XML doc from memory
EXEC sp_xml_removedocument @intDoc
SET @bolOpen = 0
INSERT OPS_TimeCardHours(TimeCardID, DateWorked, ProjectID, WorkDescription, BillableHours, BillingRate, WorkCodeID, Location)
Values(@NewTimeCardID,DateWorked, ProjectID, WorkDescription, BillableHours, BillingRate, WorkCodeID, Location)
select @NewTimeCardID ,DateWorked, ProjectID, WorkDescription, BillableHours, BillingRate, WorkCodeID, Location
from @tempXMLTimeCardWorked
-- commit transaction, and exit
COMMIT TRANSACTION
set @Result = @NewTimeCardID
RETURN 0
-- Error Handler
ErrorHandler:
-- see if transaction is open
IF @@TRANCOUNT > 0
BEGIN
-- rollback tran
ROLLBACK TRANSACTION
END
-- set failure values
SET @Result = -1
RETURN -1
go
Hi Everyone,
I am trying to do a query where I need to use as little C# as possible to build my gridview. Basically I have a column called statusID. There are about 15 options for this column but I only want to count certain ones. I want to count when statusID = 3 and output that into a column called "fullUnitsUsed" but when the value is 4 or > 13 I want it to count and put the result into a column called "halfUnitsUsed". I also want it to count based on the month. To accomplish this I have used CASE and GROUP BY. This has worked to some extent. Currently if I COUNT for one month I get the correct number of fullUnitsUsed and halfUnitsUsed used for January. Unfortunately the query returns 2 records for the month. The first one has a value for fullUnitsUsed and halfUnitsUsed is NULL, the second record has fullUnitsUsed as NULL and halfUnitsUsed has the correct value. I was hoping to output one record where both fullUnitsUsed and halfUnitsUsed have data. My other problem is that if I test for the entire year (which is what this query is supposed to do) there are 5 records returned for each month, 3 of the records have fullUnitsUsed and halfUnitsUsed both as NULL and for the other 2, one has fullUnitsUsed with data and the other has halfUnitsUsed with data and the other column in both records is NULL. The values for fullUnitsUsed and halfUnitsUsed are counted for the entire year as well, which I only want it to count based on each month. Below is my query, any suggestions about how to approach this will be greatly appreciated. If any clarification is needed please let me know. Again if I could get this to work completely with SQL and not need to use any more C# than I have to it would be preferable.
SELECT People.lastName + ', ' + People.firstName AS fullName, Property.Name, NYSDDSORegion.Description, OpenDays.[month], OpenDays.maxOpenDays,CASE Attend.statusID
WHEN 3 THEN COUNT(Attend.statusID)
END AS fullUnitsUsed,CASE Attend.statusID
WHEN 4 THEN COUNT(Attend.statusID)
WHEN 14 THEN COUNT(Attend.statusID)
WHEN 15 THEN COUNT(Attend.statusID)
WHEN 16 THEN COUNT(Attend.statusID)
WHEN 17 THEN COUNT(Attend.statusID)
WHEN 18 THEN COUNT(Attend.statusID)
WHEN 19 THEN COUNT(Attend.statusID)
WHEN 20 THEN COUNT(Attend.statusID)
END AS halfUnitsUsed
FROM Attend INNER JOIN People ON Attend.personID = People.personID
INNER JOIN Property ON Attend.propertyID = Property.propertyID
INNER JOIN NYSDDSORegion ON Property.RegionID = NYSDDSORegion.RegionID
CROSS JOIN OpenDays
WHERE (Attend.attendDate BETWEEN '1/1/2007' AND '12/31/2007')
GROUP BY Property.Name, People.lastName, NYSDDSORegion.Description, People.firstName, OpenDays.monthID, OpenDays.[month], OpenDays.maxOpenDays, Attend.statusID
ORDER BY Property.Name, fullName, NYSDDSORegion.Description
I'm unable to specify multiple columns in my order by statement if i use a case statement.
Does anyone know why this is, or what syntax would make this work?
Thanks
SELECT ....
ORDER BY (CASE Lower(@SortExpression)
WHEN 'prodname' THEN prodname, prodprice
WHEN 'prodsize' THEN prodsize, prodname
WHEN 'prodprice' THEN prodprice, prodname
Else prodcompany, prodname
END)
Please help me, i want to know how to make sql server columns case sensitive for a login table.
View 1 Replies View RelatedHi,
I have a problem. I need to rename all columns of a database to uppercase. Since SQL SERVER 2005 does not support changing system tables is there a smooth way to do this? Has anyone ideas for a script? point me to the right direction.
I have found the stored procedure sp_rename which could be useful (or would it be better to alter the tables)...
So any help would be appriciated very much...
Regards
fb
I am writing a fairly simple sql, and I would like to write something like
Code Snippet
select
firstname as firstname,
case
when firstname = 'Peter' then 'yes'
else
'no'
end as whatever
from
MyTable
where
whatever = 'yes'
And this should then select out the rows where column number 2 is 'yes'.
It doesn't work, and I have to copy the firstname = 'Peter' into the where clause.
But why?
Is it possible to combine a CASE statement with two different columns to retrieve data into one result column? In one column it has multiple JobCode, but this needs to be divided. The only way I can see to do this is take the data from another column to get the results.Ex. JobCode - has one code for several job descriptions (there are about 30), but all within this code cannot have the same level of access. So I need to divide them out, and put them in one column for AccessLevel.Â
 JobTitle - has one code for one job, (but there are over 100).I want to pull from both columns to get the results I need to assign appropriate access level in one column.
Case JobCode    (they all have same job code, but everyone in this job code should not have same access)
When '45' Then '1' (Principal, Asst. Prin, or any Administrator, Counselors)
When '25' Then '2' (this could be teacher, etc. )     Â
Case JobTitle  (this is how access should be)
       When '12345' Then '1' (this is Administration only)Â
[code]....
I am using Visual Web Developer Express 2005 as a test environment. I have it connected to a SQL 2000 server. I would like to use a Select Case Statement with the name of a column from a SQL Query as the Case Trigger. Assuming the SQLDataSource is named tCOTSSoftware and the column I want to use is Type, it would look like the following in classic ASP:
Select Case tCOTSSoftware("Type")
Case 1
execute an SQL Update Command
Case 2
execute a different SQL Update Command
End Select
What would a comparable ASP.Net (Visual Basic) statement look like? How would I access the column name used in the SQLDataSource?
SELECT
h1.ftraccode,
CASE WHEN FTRAADDRED='A' then h1.ftrascode end as 'From Sec',
CASE WHEN FTRAADDRED='r' then h1.ftrascode end as 'To Sec',
case when ftraaddred ='A' then h1.ftradesc end as 'From Description',
case when ftraaddred ='r' then h1.ftradesc end as 'to Description'
from bHISfile h1
where h1.ftradesc like 'sw%'
order by 1
----------------------------------------------------------------
clintcode |from_sec | to_sec| from_desc | to_desc
---------------------------------------------------------------
ABADJ16421 |NULL | MMTEI |NULL |SWITCH TO OAPIF
ABADJ16421 |OAPIF | NULL |SWITCH FROM MMTEI |NULL
2(row)
Expected output like this
----------------------------------------------------------------
clintcode |from_sec | to_sec| from_desc | to_desc
---------------------------------------------------------------
ABADJ16421 |OAPIF | MMTEI |SWITCH FROM MMTEI |SWITCH TO OAPIF
1(row)
When I try to do the following SQL statement to select a different column it gives the error below as one is a date and one a number
[I]ORA-00932: inconsistent datatypes: expected DATE got NUMBER
Select
CASE WHEN 2=1 THEN DATE+TP_PERIOD/48 ELSE TP_PERIOD END DATETIME,
Is there a way to use TOCHAR or something so I can get either result in one column?
That may not be the most exact TITLE I have used for a question as CASE may not be the best expression to use but I have a query:
select AR.ClientID,
AR.ReferenceID,
AAC.SequenceID,
AA.AppearanceDate,
CASE
WHEN AAC.Outcome IS NULL Then 'Cancelled' else
[Code]....
This returns the following data set:
ClientID ReferenceID
SequenceID AppeareanceDate
Outcome Rownum
1000000 2
2000358 2005-11-07
Yes 1
[Code] ...
What I want the eventually solution to be is that for each unique/distinct client, reference and sequence there is one record (row). Based on the row_number, I want the first 'AppearanceDate' renamed to 'AppearanceDate1' with the first AppearanceDate as the data and the first Outcome to be renamed 'Outcome1' with the first Outcome as the data. Any subsequent rows would follow as columns:
ClientID ReferenceID
SequenceID AppeareanceDate1
Outcome1Â AppearanceDate2
Outcome2
1000000 2
2000358 2005-11-07Â
Yes NULL
[Code] ...
Only four AppearanceDates and outcomes are required based on the unique/distinct Client, Reference and SequenceIDs. How I can loop through the Appearances based on the row_number and show each record in one row?
I have 1 table (Test1)
A B C D
-----------------------------
010 15.2 20 0
030 13.8 25 0
090 10.3 1.2 0
010 7.25 10 0
030 25.1 25.23 0
010 21.01 14 0
090 10.50 8 0
I want to use SP to do something like this
UPDATE Test1
If [A] = '010' then
SET [D] = [B]
end if
If [A] = '090' then
SET [D] = [C]
end if
It is possible to use SP and only one UPDATE statement ?
This is not acceptable (the table is read twice, 200.000 - 300.000 rows)
UPDATE Test1
set [D] = [B]
WHERE [A] ='010'
+
UPDATE Test1
set [D] = [C]
WHERE [A] ='090'
Okay, so i have to check to tables against each other.
if record in Table1 IS NOT in Table2 i want to set dnc to '' or null if record in Table1 IS in Table2 i want to set dnc to 'Y'
currently, i have to do two passes. i was wonder if anyone would help me make this one statement.
Thanks!
update t1
set dnc = ''
from test_new.dbo.consumer t1
go
update t1
set dnc = 'y'
from test_new.dbo.consumer t1
inner join residential.dbo.dnc on tl1=phone
go
Im trying to do the following but get the error.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
The code is
update [table]
set [field 1] = (select (case [field 2]
when 'B' then 'Y'
when 'C' then 'N'
when 'N' then 'N'
when 'P' then 'Y'
else 'N'
end)
from [table]),
[field 3] = (select (case [field 2]
when 'B' then 'Y'
when 'C' then 'Y'
when 'N' then 'N'
when 'P' then 'N'
else 'N'
end)
from [table])
ANy ideas?
I am selecting from the database table and while I am selecting I am changing the value of the field
so thisis how it goes.
SELECT
.InCompleteOther = CASE WHEN (ErrMessage='Beneficiary in status') THEN 'You have End_Stage'
ELSE InCompleteOther
END
From MYTABLE
some how I am getting an error what could be it.
I can't seem to figure this out, trying to update from another table based on a case expression: Keep getting a syntax error by the join clause.
UPDATE Table1
SET Table1.Id =
CASE WHEN Table1.AlphaCol = 'UNKNOWN' THEN 0
ELSE Table2.Id
END
JOIN Table2
ON Table1.AlphaCol = Table2.Description and Table1.Type = Table2.Type
WHERE Table1.Id is NULL
Is it possible to use CASE in update statement? What is the syntax? I need to pass parameter @week, when @week = 0, 2, 4, then field = @Status and so on
Thanks.
Hi,
I have a table as follows:
CREATE TABLE [MyTable] (
[SaleYear] [smallint] ,
[SaleMonthNum] [smallint] ,
[SaleMonthName] [nvarchar] (20) ,
[TotalSale] [money] NULL
) ON [PRIMARY]
GO
What I want is to update the field 'SaleMonthName' based on the 'SaleMonthNum' field using the CASE expression. I want something like this (pseudo-code):
update Mytable
set SaleMonthName
Case:
IF SaleMonthNum =1, then := 'January'
IF SaleMonthNum =2, then := 'February'
...
IF SaleMonthNum =12, then := 'December'
Many TIA.
Hi guys,
My first question is, is it possible like this?
case
when a=b then
update table1
set columnA = convert(datetime,columnB,113)
from table2
where a=b
insert into table1 (columnames)
select (few columns, and few defined value)
from table2
where a=b
else
insert into table1 (columnames)
select (few columns)
from table2
where a=b
end
from there u can know im a newbie n know nothing bout sql :D
Thanks in advance guys!
Hi,
I have this update statement that works, it updates the totalamount to calc amount, but I want to update totalamount only when it is not equal to calcamt.I have tried many things but in vain.Can some one please help me.
How do i use case statements to update only when totalamount!=calcamt.
update c
set totalamount= calcamt
from Prepay c
JOIN
(select sum(amt) as calcamt, payid
from pay
group by payid
)b ON b.payid= c.payid
where c.cust_no='somenum'
I would like to update a decimal column in a temporary table based ona set of Glcodes from another table. I search for a set of codes andthen want to sum the value for each row matching the Glcodes. Theproblem is I keep getting multiple rows returned errors."Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.The statement has been terminated."This is correct as there can be many rows matching the Glcodes foreach iteration of the case statement and I need to catch them all.I have posted some of the code below and would appreciate any help asI'm scratching my head over this one. It's all very much work inprogress again.Regards,DECLARE@CostCentreNVARCHAR(3)DECLARE@COIDNVARCHAR(3)DECLARE@TheYearNVARCHAR(5)DECLARE@PlorBSNVARCHAR(2)DECLARE@BusinessUnitNVARCHAR(50)DECLARE@BranchNVARCHAR(3)SET@CostCentre= 'xxx'SET@COID= 'inc'SET@TheYear= '2004'SET@PlorBS= 'x2'SET@BusinessUnit= 'PBUS'SET@Branch= ‘usa'CREATE TABLE #SummaryTempTable ([GLD_ACCTNG_PER] int,[Order Num] decimal(9,2),[Summary Description] varchar(50),[Summary Amount] decimal(9,2))INSERT INTO #SummaryTempTable VALUES(199999, 1.1, 'Tot Ext Sales',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 1.2, 'Tot Int Sales',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 1.3, 'Inter Mark Up',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 2.1, 'Tot Ext Costs',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 2.2, 'Tot Int Costs',0.0)INSERT INTO #SummaryTempTable VALUES(199999, 2.3, 'Inter Mark UpCharges', 0.0)UPDATE #SummaryTempTableSET [Summary Amount] = (SELECT sum(CASEWHEN ((ACT_GL_NO between '4000' and '4059') or (ACT_GL_NO between'4065' and '4999') or (ACT_GL_NO IN ('4062','4063'))) THEN GLD_TotalWHEN (ACT_GL_NO IN ('4060','4064')) THEN GLD_TotalWHEN (ACT_GL_NO = '4061') THEN GLD_TotalWHEN ((ACT_GL_NO between '5000' and '5059') or (ACT_GL_NO between'5065' and '5401') or (ACT_GL_NO IN ('5805','5806','5062','5063')))THEN GLD_TotalWHEN (ACT_GL_NO IN ('5060','5064')) THEN GLD_TotalWHEN (ACT_GL_NO = '5061') THEN GLD_TotalELSE 0END)FROM howco_dw_test.dbo.cubeFinancePeriodWHERE ([coid] = @COID) AND (GLD_SSN_BRH = @Branch) AND(GLD_ACCTNG_PER like @TheYear) AND ACT_GL_NO BETWEEN 4000 AND 9999AND GLD_CST_CTR IN ('008','021','031','041')GROUP BY ACT_GL_NO, GLD_ACCTNG_PER)
View 1 Replies View RelatedHi,
I have this update statement that works, it updates the totalamount to calc amount, but I want to update totalamount only when it is not equal to calcamt.I have tried many things but in vain.Can some one please help me.
How do i use case statements to update only when totalamount!=calcamt.
update c
set totalamount= calcamt
from Prepay c
JOIN
( select sum(amt) as calcamt, payid
from pay
group by payid
)b ON b.payid= c.payid
where c.cust_no='somenum'
An IBM Global Services consultant is telling my client that in order to have SAP BI read any data from any other application supported by SQL Server 2005, that all tables and fields MUST be in UPPER CASE. This would mean that SAP BI could not read ANY data from AdventureWorks (which everyone needs ) but more importantly from 95% of applications written and stored on SQL Server. I find this to be ludicrious, frankly, but don't know how to find out if it is true. Anyone?
View 4 Replies View RelatedBelow is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
Is it possible to use CASE statement with INSERT /UPDATE statement?this is what i am trying to do
i have a table like this
Field1 Field2 Field3 FieldType1 FieldType2 FieldType3
1-when there is no data for a given combination of Field2 and Field3,i need to do "insert".i.e the very first time and only time
2-Second time,when there is already a row created for a given combination of Field2 and Field3,i would do the update onwards from there on.
At a time value can be present for only one of the FieldType1,FieldType2,FieldType3) for insert or update
I am passing a parameter to the stored procedure,which needs to be evaluated and wud determine,which field out of (FieldType1,FieldType2,FieldType3)has a value for insert or update .this is what i am trying to do in a stored procedure
CREATE PROCEDURE dbo.StoredProcedure
( @intField1 int, @intField2 int, @intField3 int, @intFieldValue int , @evalFieldName varchar(4) )So i am trying something like
CaseWHEN @evalFieldName ="Fld1" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,@intFieldValue,cast(null as int) fld2 ,cast(null as int) fld3)
CaseWHEN @evalFieldName ="Fld2" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,@intFieldValue,cast(null as int) fld3)
CaseWHEN @evalFieldName ="Fld3" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,cast(null as int) fld2,@intFieldValue)
END
similar trend needs to be followed for UPDATE as well..obiviousely its not working,gives me synatax error at case,when,then everywher.so can someone suggest me the alternative way?..i am trying to avoid writing stored procedure to insert/update for each individual fields..thanks a lot
Hello everyone,
is there anyway to use an update sub query in a case expression , something like this for exampleselect username,(case when password ='606' then (update users set username = 'me' where id= '3') else password end) from users i have been googling this issue just with no usefull resultsthanks for any replyMahmoud Manasrah