Does anyone know if it is legal to use SQL Server 2005 Express in a commercial website? There is no need for SQL Server 2005 so the Express would do the job great.
Thx,
Viktor
Hi,
View 5 Replies View RelatedI'm working on a server based ASP.NET app.
I'd also like to deploy it as a single user version.
Rather than rewrite it to .Net windows (at least initially), I'm thinking about having the user install Cassini and SQL Server Express on their machines, and run the app as a "local" web app.
Clearly, there are a lot of issues to consider.
One is whether to even think about using SQL Server Express for this.
So, two questions on that, initially:
Q1) Are there any licensing issues? I would direct the user to download directly from MS.
Q2) What would it take to get SQL Server Express and the application to start talking to each other once SQL, Cassini and the application files were installed?
> I'm assuming I would have to build "data base initiation" and "file create" procedures, etc., but what about just having the App find SQL, start it, and get it configured, etc for use. How hard would it be to proceduralize this so that it would look to the user like a "standard" application software installation procedure?
Any guidance on this would be appreciated.
Thanks!
Has anyone used SQL Server 2005 on a production website? I know that it tops out at 1GB of ram, but it is free. Any idea how much load it will take before you need to move up to the full version?
View 1 Replies View RelatedSQL Server Express 2005 will not install. I download the necessary package direct from the asp.net website and towards the end of the installation the following error occurs:
"An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'."
I get the exact same message for the following:
Microsoft SQL Server VSS Writer - same message as above only requesting a valid copy of 'SqlWriter.msi'
MSXML6.0 Parser - same message as above only requesting a valid copy of 'msxml6.msi'
Can anyone help? I am desperate to use SQL with Visual Web Developer 2005 and 2008, but I am unable to do so. Please help if you can.
Steve
1Is it possible to choose local user,(instead of local system) in sql setup service login and then use mixed mode
default configuration in report server or choose configure server later. I will be using a third party host using vista, unfortunately I do not have my own server ( I do not have a domain yet)
vista sql 2005 standard vs 2008. ultimate
2 What is the best configuration for a new aspiring asp.net ssrs developer.
3 Do I need to configure the server if I choose local user?
4. what is the best way to configure sql?
By the way what items
should I look forward in choosing a web host,(who is willing to give alot of help to developers) my interests include ssrs 2008 sql 2008 sql 2005
asp.net mvc, crystal reports, wcf infragistics. I am really interested in showing
examples in sql reporting services, crystal reports wcf , web services , infragistics
asp.net mvc intrigues me.......
I would like to get on a track to eventually use sharepoint services
Thanks again, I know I ask I alot of questions........
Hello Everyone,I have been searching hard to get an answer on this question, I hope someone here can help me!Here is my situation:I am planning to build a website for them, that would be used for some event registration (by people outside my company). I also plan to use SQL Express Edition as the database backend for the site. Now this is where I have a question, can I use SQL Express and pay nothing? (It is free right?) There would be a maximum of 600 registrations over a period of 1 month. I don't expect more than 50 concurrent users. The administration side of the application would be used by internal employees (So, the application would be used by internal employees and external people). Where can I find more information about the license?I would be very thankful if someone can guide me on this.ASP_Newbie
View 3 Replies View RelatedHiI’m abut developing a website that has a 200 megabytes SQL database ,in my estimation the maximum online users are 100 users for first year , I want to make shore a SQL express 2005 database in good enough for my purpose. Another question is how much can I count on a SQL express 2005 database? I mean how much it could be grown and abut security (I mean is it as secure as SQL server?). Thanks.
View 3 Replies View RelatedWhy can't I run my website maded by ASP.NET 2.0 aftwr I upgrade SQL 2005 Express with SP1?
I have a website maded by Microsoft Visual Web Developer 2005 Express Edition, it work well! but after I download and install SQL 2005EXpress SP1,I find that website can work, the error message seems that it can't connect database, why? Do I need rebuild database?
Many thanks!
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
here is my web.config file:<?xml version="1.0"?><!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
--><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<appSettings><add key="EmailFrom" value="webmaster@reaganpower.com"/>
<add key="EmailSubject" value="File Ready for Download!"/><add key="SmtpServer" value=""/>
<add key="MailUser" value=""/><add key="MailPassword" value=""/>
<add key="MailPort" value="25"/><add key="EmailFormatSelected" value="Text"/>
<add key="PageTitle" value="Send It Now!"/><add key="ShareLocalFolderPath" value="H:MIS DepartmentIntranetSendItNowFileStorage"/>
<add key="httpDownloadPath" value="http://misfs/SendItNow/ContentFiles/"/>
<!--
<add key="CurrentTheme" value="CleanBlue" />-->
<add key="CurrentTheme" value="CleanOrange"/></appSettings>
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=(local)SqlExpress;AttachDbFilename=|DataDirectory|FileShareDB.mdf;Integrated Security=True;User Instance=True"providerName="System.Data.SqlClient"/>
</connectionStrings><system.web><!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.-->
<identity impersonate="false"/>
<roleManager enabled="true"/><compilation debug="true" strict="false" explicit="true">
<assemblies><add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages><namespaces>
<clear/><add namespace="System"/>
<add namespace="System.Collections"/><add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/><add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/><add namespace="System.Web"/>
<add namespace="System.Web.Caching"/><add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/><add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/><add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/><add namespace="System.Web.UI.HtmlControls"/>
</namespaces></pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user. -->
<authentication mode="Forms"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>-->
</system.web>
</configuration>
Hi all,
I have read/studied (i) Working with Databases in Visual Web Developer 2005 Express in http://quickstarts.asp.net/QuickStartv20/aspnet/doc/data/vwd.aspx, (ii) Xcopy Deployment (SQL Server Express) in http://msdn2.microsoft.com/en-us/library/ms165716.aspx, (iii) User Instances for Non-Administrators in http://msdn2.microsoft.com/en-us/library/ms143684.aspx, and (iv) Embedding SQL Server Server Express in Applications in http://msdn2.microsoft.com/en-us/library/ms165660.aspx. I do not understand the concepts and procedures to do Xcopy and User Instances for non-administrators completely-I do not know how to connect to databases and create database diagrams or schemas using the Database Explorer. I have a stand-alone Windows XP Pro PC. I have created a ChemDatabase with 3 dbo tables in the SQL Server Management Studio of my SQL Server Express and a website of my VWD Express application with an App_Data folder. I am not able to proceed to use Xcopy and user instance to bring the 3 dbo tables of ChemDatabase to my App_Data folder. Please help and give me some detailed procedures/instructions to bring the 3 dbo tables of ChemDatabase (or ChemDatabase itself) from the SQL Server Management Studio Express to the App_Data folder of the website of my VWD Express project?
Thanks in advance,
Scott Chang
Hello all,
Being still a relative newcomer to SQL Server (people may say I'm trying to take on too much being somewhat inexperienced once they read about the problem I'm trying to tackle, but alas...) I'm running into the following problem: I need to create tables in my user database on the fly (using Stored Procedures) so that each table can be created many times in the database but only once for every user. The tables should be named something like "username.Table1", "username.Table2" etc. as opposed to "dbo.Table1". I then want to use the stored procedure from .NET/C# in my web application, so that i can create the complete set of usertables for each of my clients.
Now, I tackled the stored procedure part (that is, it creates all the tables I need with all the parameters I want) and am able to use it from my web application (which took some time to learn but proved quite easy to do), but I cannot seem to get it coupled to the current user (instead of the dbo). Every time I trie, the tables are created as dbo.Table1 and when I try to create a new set, it gives a warning ("table with name such and so already exists..."). I made sure to log in as an authenticated user (using forms authentication) before trying to create the tables but this gives the aforementioned result.
What am I doing wrong? I use Visual Web Developer Express, SQL Server 2005 Express and IIS version 5.1
Please help :-D
Greetingz,
DJ Roelfsema
Hi there,
I have a question which I put the company that host my website but I didnt get a conclusive answer. Maybe someone here will be able to advise or help me with my situation.
I want to build a database that I will run on my local server and the front end of this will be run using a windows application. I have a website which I run the database on the remote server. What I would like to do is to be able to synchronize certain tables between the two databases (such as updating products table, or orders table). I am using sql server 2005 and I am using the sql server management studio to access my database on the remote server. I did notice there is a synchronzie button. I also came across some 3rd party tools. Not sure if that is the way to go.
If anyone as done this before or can give me any suggestions, I would be delighted.
Thanks
Anthony
HiI'm trying to convert some verbose SQL Server 2000 T-SQL code that useslots temp tables and the like into a SQL Server 2005 only version,possibly using CTE.What I want to achieve is a menu like that onhttp://www.cancerline.com/cancerlin...9801_6_3_3.aspxNotice how you have the top level menu items, and then child nodesexpanded down to the low level page that link sends you to.Table sql:CREATE TABLE [dbo].[NavigationNode]([NodeId] [int] primary key nonclustered,[Text] [nvarchar](150) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[AlternativeText] [nvarchar](250) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[Level] [int] NULL,[ParentNodeId] [int] constraint fk_parent_navnodeforeign key references [NavigationNode] ([NodeId]))Table data:1HomeNULL1NULL2SolutionsNULL113Solutions child1NULL224Solutions child2NULL225ContactNULL116solutions child1 child1NULL337solutions child1 child2NULL338solutions child1 child3NULL339solutions child1 child4NULL3310contact child1NULL25I have started to write some code with the common table expressionsyntax:declare @root int;set @root = 2;WITH Nav([NodeId],[ParentNodeId], [Text], [Level]) AS(SELECT [NodeId], [ParentNodeId], [Text], [Level]FROM [dbo].[NavigationNode]WHERE [ParentNodeId] = @rootUNION ALLSELECT n1.[NodeId], n1.[ParentNodeId], n1.[Text], n1.[Level]FROM [dbo].[NavigationNode] n1INNER JOIN Nav n2ON n1.[ParentNodeId] = n2.[NodeId])SELECT *FROM NavWhich returns:32Solutions child1242Solutions child2263solutions child1 child1373solutions child1 child2383solutions child1 child3393solutions child1 child43However I would prefer to the childnode, and then get parents of thatchild recursively. Doing that would leave me with a result set thatcould add the top level menu items to and have all the data required.Any help is greatly appreciated.-Brian
View 1 Replies View Related
Dear members
I am using window vista and I am not able to download the SP2 for sql server 2005.
every time there is a message age can't be displayed.
from where I can download the sp2
thanks in advance
in visual studio web developer express edition 2008 i added a new item this was a sql server database which i called test2. I added a table called comments, and the fields name, email, comments, IPAddress, and Date and in my comments.aspx page i added a name textbox, a texbox for email, a textbox for comments and the submit button i double clicked on the submit button and added the following code
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim mydS As New SqlDataSource mydS.ConnectionString = ConfigurationManager.ConnectionStrings("testConnectionString1").ToString mydS.InsertCommandType = SqlDataSourceCommandType.Text mydS.InsertCommand = "INSERT INTO comments(Name,Email,Comments,IPAddress,Date) VALUES (@Name,@Email,@Comments,@IPAddress,@Date)" mydS.InsertParameters.Add("Name", TextBox1.Text) mydS.InsertParameters.Add("Email", TextBox2.Text) mydS.InsertParameters.Add("Comments", TextBox3.Text) mydS.InsertParameters.Add("Date", Date.Now) mydS.InsertParameters.Add("IPAddress", Request.Params("REMOTE_ADDR")) Dim rowsaffected As Int16 = 0 Try rowsaffected = mydS.Insert Catch ex As Exception Server.Transfer("errors.aspx") Finally mydS = Nothing End Try If rowsaffected <> 1 Then Server.Transfer("errors.aspx") Else Server.Transfer("confirm.aspx") End If End Sub Protected Sub TextBox1_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged End Sub but when i run it it gives me a problem with this line mydS.ConnectionString = ConfigurationManager.ConnectionStrings("testConnectionString2).ToString and says something abt unidentified object and I want to know how do i set the connection string or alternatively where?????? and my table does not update with the corresponding values i enter on the webpage. i also changed the authentication mode to forms instead of windows as i was advised but i'm still having a problem
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
Hi all,
I am stuck with a problem using ASP.Net website. I created a website which accesses a database table in SQL Server 2005. The default.aspx is a form which inserts/updates/deletes data from the database. After creating the website I published it to IIS (Inetpub -> wwwroot). When I use Visual Studio 2005 and build the website and start with debugging. the form comes up and i can insert/update or delete the data from the table as I want. Now, as I have the website published I can access the form from another sharepoint website using the url as
/Employee_Data/Default.aspx">http://<mydesktop>/Employee_Data/Default.aspx
the form shows up but I am not able to access any of the database. I do not see any errors either. Once I click on the button the page just refreshes but nothing else happens. I have my web.config as :-
<?xml version="1.0"?>
<configuration>
<appSettings/>
<connectionStrings/>
<system.web>
<compilation debug="true"/>
<authentication mode="Windows"/>
</system.web>
</configuration>
Am I missing something? I even have Anonymous access in the IIS inetpub properties. I can even the database as I am the administrator..... I appreciate your suggestions.
Thanks,
Kavya
Hi guys,
I am just wondering what's the difference of sql server 2005 standard and enterprise editions. can I use SQL server 2005 to host a database for a website?
Thanks!
Daren
I just have a simple question that can hopefully answer whether I should dive too deeply into Reporting/Analysis Services. I'm looking to run some clustering algorithms on user-inputted keywords on objects within my database (please see http://flickr.com/photos/tags/friends/clusters/ for an example of what I'm talking about). It seems to me that the various reporting methods that SQL Server provides would be an ideal, quick and easy way of providing this for my SQL Server 2005 database.
Can the reporting services provide this type of functionality? And if so, would this be scalable? I would want to be able to access this clustered data in much the same way I do queries across my database and would want them to be done quickly and efficiently.
Thank you for your help.
Where can I further educate myself on this subject?
Right off from the start I would assume that installing SQL Server 2000 or 2005 on Windows Server 2003 that is set up as a web server hosting a website would be against "best practices." Is my assumption right?
Common sense tells me to not to host a website on a pc that is also hosting my database.
Hi, everyone!
I'm trying to practice with the website starter kits using Visual Studio
2005. But so far, I haven't been able to run the mentioned websites because
the connection they use is against SQL Server Express...
I don't have SQL Server Express. Instead, what I have installed is SQL
Server 2005 Standard Edition.
I'm not even able to use the new APS.NET WeSAT application to administer the sites because allway get the "Time out" error.
Do any of you know how to resolve this whole situation?
Thanks very much in advance for your help.
Ralph.
Hello,
View 1 Replies View RelatedIf i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies View Related
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
Hello everybody,
I intend to used SQL Express database in my website so that I don't have to go through all the database deployment effort when deplying my website.
In this regard, can anyone please tell me what features would it require in my hosting package so that my application works fine (in database context). Would I have to purchase any additional features (like the way we purchase SQL Server database(s) in hosting package) for SQL EXpress in order to deploy my application??
I look forward to you kind replies.
Thank you.
Zulfiqar Dhuka
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies View RelatedHi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
Hi, I am using express database and tools. I have an aspnetdb express database because I am using the login controls, personalisation...Can I use this database for my private tables also? Or do I need a separate express database for my private tables? Will using aspnetdb database, which contains special asp.net tables, for my private website tables create any kinds of problems in using my website? I want to use a single express database for my website, not two different express databases.
Regards, Sandy
Hi,
I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ?
Thanks in advance.
Currently I have following things installed on my Computer
1. SQL Server Express 2005
2. SQL Server Management Studio Express 2005 CTP
I need to install following things
A. Microsoft SQL Server 2005 Express Edition with Advanced Services
B. Microsoft SQL Server 2005 Express Edition Toolkit
Do I need to uninstall any any of 1 or 2?
What should be my path to upgrade these software.
I've started with the development of a website which will use a sql server 2005 database. I want to use the asp.net membership and roles functionality. In the end the website will be hosted by a hosting company.
What is the best way to store the database? In the App_data folder or outstide the App_data folder?
Second, do hosting companies support placing sql server databases stored into the App_data folder?
Hi all,
I have a stand-alone Windows XP Pro PC that has SQL Server Express (SSE) and Visual Web Developer Express (VWDE) programs. The Microsoft "pubs" Database is installed in the SQL Server Management Studio Express (SSMSE). I created a website in my VWDE program. I need the .mdf file of the pubs Database in the App_Data folder of website of my VWDE project. I think that User Instance in my SSE is established. I have studied Xcopy Deployment (SQL Server Express) and User Instance for a quite a while and I still do not know where and how to use Xcopy to get the mdf file of the pubs database into the App_Data folder of the website of my VWDE project. Please help and give me the detailed key steps/instructions about where and how to get the .mdf file of the pubs database into the App_Data folder of the website of my VWDE project via Xcopy.
Thanks in advance,
Scott Chang