Can @@ROWCOUNT = 0 Even When A Row Is Inserted Into A Table?
May 31, 2006Does @@ROWCOUNT always return an accurate acount of rows affected by last query OR can it be equal to zero when some rows have been affected?
View 2 Replies
ADVERTISEMENT
Rowcount - Returning Rowcount From SSIS To A Vb.net App Executing The Dtsx Package
Jul 7, 2006I have a vb.net application that executes a simple flat file to sql table dtsx package. I want to capture the rowcount to display back to the user to verify the number of rows that were inserted or updated to the table. I have a Row Count component placed between the flat file source(without errors) and the destination component. I have assigned a variable named RecordCount to the Row Count component. So far so good I hope : )
Now, I also use a variable to "feed" the package the flat file source. This works fine, but I cannot figure out how to retrieve the row count information and how to assign that to the variable RecordCount.
Also, if anyone has any insight on the way to work with the OnProgress method in SSIS I would appreciate that as well. In SQL 2000 using DTS I create a "PackageEventsSink" that I had found online, and it worked great for monitoring the progress of the DTS. Can't seem to figure out how to get it to work in SSIS.
Thanx,
Mike
How To Get Rowcount From Table
Aug 16, 2007Hi guys, can anybody help to solve this problem.
set @count=0Insert into User_t (userid, counter) select userid, count+1 from resultset is not working
0/p: bhasker 1 bhanu 1 kishore 1
but o/p must be bhasker 1 bhanu 2 kishore 3
SQL LOJ Rowcount &&> SSIS MergeJoin Rowcount. Why?
Jul 25, 2007In sql I perform the following
SELECT * FROM
xlsdci x LEFT OUTER JOIN fffenics f ON f.[derived deal code] = x.[manual dcd id]
which gives me a row count of 2709 rows
In SSIS I have a merge join component (left outer)
left input = xlsdci with a sort order of 1 ASC on [manual dcd id] (OLE DB source component)
right input = fffenics with a sort order of 1 ASC on [derived deal code] (OLE DB source component)
which when run in the IDE gives me a rowcount of only 2594 rows
Why is this so?
Also if I change the join to INNER in the merge join, the number of rows drops dramatically to only 802.
Fair enough, I hear you cry, maybe there are IDs in the 'xlsdci' table that are not in the 'fffenics' table. Ok. But the following SQL reveals that there are only 14 rows(IDs) in 'xlsdci' that are not in 'fffenics'
SELECT * FROM xlsdci
WHERE [manual dcd id] NOT IN (SELECT [derived deal code] FROM dbo.fffenics)
What is going on here?
Table Rowcount Question
Jul 20, 2005What's the difference between the rowcount column returned by:DBCC SHOW_STATISTICS('table_name','primarykey')andSELECT rows FROM sysindexes WHERE id = OBJECT_ID('table_name') AND indid < 2Is the second query always accurate, whereas the 1st may not be if the tablestats are bad?
View 1 Replies View RelatedWriting RowCount Variable To Table
Dec 5, 2006I have a series of tasks in a Sequence Container. One of them is a Data Flow task, and inside that task is a Row Count transformation that counts the number of rows I add to a table. The Row Count transformation was added to record the number of rows written to a table in a log table.
When I try to retrieve the resulting variable (RowCount) in the Data Flow task, I get the default value (0). When I try to retrieve it in a subsequent task, I get the value 1. When I try to consume it in the OnPostExecute Event Handler of the original Data Flow task, I get a value of NULL.
1) When is the appropriate time to call the variable assigned to a Row Count transformation so it can be written to a log table?
2) Is there a way during debugging to see the set value of the RowCount variable?
I am using Microsoft SQL Server Integration Services Designer Version 9.00.2047.00 in Visual Studio 2005 Version 8.0.50727.42 (RTM.050727-4200)
Thank you in advance for your posts.
Updating A Large Table: Set @@rowcount Versus Explicit Transactions
Jul 23, 2005When I need to perform an update against multi-million row table Itypically specify @@rowcount, to reduce locks.e.g.set @@rowcount 1000while exists (select * from myTable where col2 is null)update myTableset col2 = col1 + 'blahblah'where col2 is nullHowever, my boss' script does something like this. I think it works OKbut it seems overly complicated to me. Any thoughts?while exists (....)begin traninsert into #tableselect ...update myTableset ...from myTable join #table ...(@numberOfRows is a counter variable, tracking #rows that have beenupdated since last batch)if @numberOfRows > 1000begincommitbegin tranendend
View 2 Replies View RelatedINSERT INTO - Data Is Not Inserted - Using #temp Table To Populate Actual Table
Jul 20, 2005Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedTransact SQL :: Verify Inserted Values From One Table (in CSV File) With Another Table (in Database)
Aug 4, 2015I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV)
1X
1Y
Results Table(SQL)
CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
2015-08-04 08:35:29.203 successfully inserted value 1Y
2015-08-04 08:30:29.203 Test Pass
2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output:
All values from values table are inserted successfully
Total count of values inserted: 2
If only few values are inserted, example only 1X from Values table is inserted in Message
Example:
Results Table CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
Output:
All values from values are not inserted successfully in result table.
Total count of values inserted: 1
Missing Values not inserted in results table are: 1Y
Update One Table When Records Inserted In Another Table - Variables In Trigger
May 19, 2014I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr]
for insert
as
begin
declare @liter as decimal(28,6)
[Code] ....
Is Having A Trigger That Inserts A Row In Table 'A', When A Row In Same Table Is Inserted By ADo.Net Code?
Oct 13, 2006I want to insert a row for a Global user in Table 'A' whenever ADO.Net code inserts a Local user row into same table. I recommended using a trigger to implement this functionality, but the DBA was against it, saying that stored proecedures should be used, since triggers are unreliable and slow down the system by placing unecessary locks on the table. Is this true OR the DBA is saying something wrong? My thinking is that Microsoft will never include triggers if they are unreliable and the DBA is just wanting to offload the extra DBA task of triggers to the programmer so that a stored procedure is getting called, so he has less headache on his hands.Thanks
View 2 Replies View RelatedTrigger- Dump 'inserted' Table To Temp Table
Jul 11, 2006I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
How To Solve Tables Or Functions 'inserted' And 'inserted' Have The Same Exposed Names.
Jul 23, 2005Hi all!In a insert-trigger I have two joins on the table named inserted.Obviously this construction gives a name collition beetween the twojoins (since both joins starts from the same table)Ofcourse I thougt the usingbla JOIN bla ON bla bla bla AS a_different_name would work, but itdoes not. Is there a nice solution to this problem?Any help appriciated
View 1 Replies View RelatedInserted Table ?
Nov 3, 2005Trying to get my head around this table:
I thought it contained all data used in an insert; meaning if i enter a row in a table the inserted table should then contain all data entered?
Ive created multiple tables linked via primary key Learner_ID this key is unique to any/all students and can never be duplicated hence i thought i would use it to link the tables.
I have tables Fab / Main / Elec / Learner_info / WS_WR.
For Fab / Main / Elec the only data i need form Learner_info is the Learner_ID field, i simply used:
INSERT INTO FAB(Leaner_ID)
SELECT Learner_ID
FROM Inserted
as a trigger to insert the ID into these tables. Everything works perfectly fine. So i assumed that i would be able to use something very similar to insert say:
Learner_ID, FNAME, LNAME, ONAME and C_NUM from the learner_info table into the WR_WS table. Apparently i was wrong I can insert the learner_ID perfectly but if i then try to add another insert trigger eg: insert fname i get an sql error:
Cannot insert the value NULL into the column 'LEARNER_ID', table 'swdt_im.WS_WR'; column does not allow nulls. INSERT fails.
Now from reading the error it suggests to me that because the second trigger is running my learner_id value has become a NULL. Obviously a primary key wont accept this value so the statement fails.
What im struggling to understand, im sure i will solve the problem eventually but i would apreciate help, and this is most important to me rather than a solution is this:
If i enter data into a row on a table does that data go into the inserted table in the same row? or does the data go into inserted as a single entry row, meaning when i tab along from learner_ID into FNAME does Learner_ID become row 1 (in inserted) and FNAME the current row? or do they go into the appropriate columns?
I was under the assumption that i could enter:
LEARNER_ID / FNAME / LNAME / ONAME / C_NUM
into one table and have a trigger insert those values into multiple other tables. Dont suppose someone can help me out im alright querying a SQL db but ive never had to develop anything other than a single table one myself before
Thanks in advance
Inserted/deleted Table.
Mar 4, 2004Hi,
I am currently working on a MS SQL server 2000.
I would like to access the data inserted or deleted within a trigger. however the built-in tables -- inserted and deleted --- are not accessible. anyone knows why? And is there any other way to do this?
Thanks
How To Retrieve A Value From The Inserted Table
Aug 20, 2004I'm writing a trigger for my DotNetNuke portal that requires me to read the value of a just inserted record. I believe I'm doing this right, still I'm unable to retrieve the desired value from the Inserted table. What am I doing wrong? Here is my code:
CREATE TRIGGER tr_addEditorRole ON [dbo].[UserPortals]
AFTER INSERT
AS
Declare @Portal int
set @Portal = (select PortalId FROM inserted)
Declare @TabId Int
set @Tabid = (select TabID from Tabs where Tabs.PortalID = @Portal
and Tabs.TabName = 'MyTab')
Declare @ModuleId int
set @ModuleId = (SELECT ModuleId FROM Modules WHERE Modules.TabID = @TabId
and Modules.ModuleTitle = 'MyModule')
update Modules
set
AuthorizedEditRoles = '-1;'
where ModuleId = @ModuleId
How To Find An Inserted Value In A Table
Apr 19, 2006Hello,
I have 2 tables, and use objectdatasource and stored procedures, with sql server.
Let say in the first table I have IDCustomer as a datakey, and other records, and in the second I have the same IDCustomer and CustomerName. I have an INSERT stored procedure that will create a new record in the first table (so generate a new IDCustomer value), and I would like to insert immediately this new value in the second table.
How can I know the value of this new IDCustomer ? What is the best way to handle that ? Once the insert in the first table is done should read it the table and extract (with an executescalar) the value and then insert it in the second table ? This solution should work but I am not sure this is the best one.
Thanks for your help.
Using Inserted Table In Trigger
Feb 17, 2005hi, i am writing a trigger to log inserts,updates and deletes in a table and would like to also enter the user details ie who did the transaction. is the spid in the inserted table? if not how do i get this information?
TIA
Getting Recenlty Inserted Value From A Table
Nov 21, 2007Hi all,
I am inserting one row from sp which is at one database into table on other database.I want to retrieve one columns value which will be recently inserted .
I was trying it using output parameter and @@Identity in sp.
But hardly any success.I guess we can not get @@Identity values from other server.
Can anybody suggest better way to do it
Thanks
Kedar
Inserted Table When Inserting
Mar 10, 2004Hi,
Now thanks to you good folks on here, I have recently found out that when inserting data into table, there is a system table which can be queried with triggers - specifically called "Inserted".
What I am wondering is what are the limitations of what I can do with the data in this table?
I know I can query it from within the trigger, but can I update data specifically in this table before it is inserted?
(ie IF field1 FROM inserted = 'blah' UPDATE inserted SET field2 = 'something')
If so is there anything that I need to look out for? Concerns? Etc?
Thanks in advance for your help
Cheers
XMl Data Is Not Getting Inserted To Table
Sep 10, 2014Data is not getting insert into table. Below mentioned is the query used. I need getting the data inserted to the table
DECLARE @FilterTable Table
(
ColumnName varchar(50),
Value varchar(250),
Type varchar(50)
[code]....
Inserted And Deleted Table
Aug 24, 2007
hi
for after trigger the records stored in followig table
inserted and deleted table.
but i want to know where this tables physically stored ...i mean in which database master or some other database?
and 2nd thing tigger fired for each row or for only insert,delete,update statement?
thanx
Special Table Inserted
Aug 2, 2007Hi,
I am building my after update trigger. The code snippet looks like this:
DECLARE Curs_PrimKey CURSOR FORSELECT * FROM Temp_PrimKeyOPEN Curs_PrimKeyFETCH NEXT FROM Curs_PrimKey INTO @P_KeyWHILE @@FETCH_STATUS = 0BEGIN EXEC('INSERT INTO Temp_Value SELECT '+ @P_Key + ' FROM inserted') SELECT @P_Key_Value = (SELECT PValue FROM Temp_Value) EXEC('DELETE FROM Temp_Value') SELECT @P_Key_Insert = @P_Key_Insert + @P_Key + ' = ' + @P_Key_Value + ', ' FETCH NEXT FROM Curs_PrimKey INTO @P_KeyENDCLOSE Curs_PrimKeyDEALLOCATE Curs_PrimKey
You must know that in the trigger after update there is a special table called inserted. From the code above you can see that I am trying to loop all primary key which is included in Temp_PrimKey. Based on the key I want to select the value from table inserted. If I update a row in the table it gives error:
"No row was updated.
The data in row 13 was not committed.Error Source: .Net SQLClient Data Provider.Error Message: Invalid object name 'inserted'."
I am guessing that if we EXEC the query it is not execute inside the trigger environment, hence it doesn't find the table 'inserted'. Can anybody tell me how to work around this? Thanks.
Getting Identity Of Inserted Record Using Inserted Event????
Jun 5, 2006is there any way of getting the identity without using the "@@idemtity" in sql??? I'm trying to use the inserted event of ObjectDataSource, with Outputparameters, can anybody help me???
View 1 Replies View RelatedSquare Boxes Getting Inserted In Table
Apr 11, 2007hi ,
In my database I have table with column of datatype nvarchar in which I am writing the address of users.Now address field in aspx page is multiline because of which my address contains characters and
. These special characters are getting inserted in database as square boxes. Is their any way to avoid it. Also the constraint is that I don't want to replace or
by space before writing contents to database.
Please write to me any solutions u are having.
thanks in advance.
Thanks and regards,
Nita Jadhav.
Is It Ever Possible That 2 Different Rows Are Inserted At Same Time Into A Table?
Jul 27, 2007There is a stored procedure that inserts a row into 'Vendors' table. Is it possible that two different calls to this sp happen at the same time and as a result, each sp inserts into the table its row at exactly the same time?
View 1 Replies View RelatedTrigger, Inserted Pseudo Table?
Jul 1, 2004I am trying to create a trigger on a table but when I check the syntax it
tells me that "The column prefix 'inserted' does not match with a table name or alias used in this query"
CREATE TRIGGER trg_Structural_GenerateBarcode ON [dbo].[tbStructuralComponentSchedule]
AFTER INSERT
AS
DECLARE @iCount int, @cBarcode char (25), @cCode char(4)
DECLARE @cProject char(7), @cComponent char(10), @iEntryID int
SELECT @cProject = inserted.fkProjectNumber, @cComponent = inserted.fkComponentID, @iEntryID = inserted.EntryID
.......
GO
How do I use the inserted pseudo table?
Mike B
Inserting New Row, Need To Grab Key From Another Table Thats Just Inserted
Oct 11, 2004i have 2 tables right now, po and notes...
the notes table contain the note_id and notetext, so example of a row would be:
1 this is the note for the first row
2 this is the note for computer parts
etc..
the po table has item info, description, po_id, and note_id, heres an example:
po_id item desc note_id
1 215-33 computer parts 2
the problem is, is there a way where say i insert the note row into the notes table first and then get the note_id of that, so that i can then insert the row into the po table which includes the note_id from the notes table?
would i have to use two separate inserts or can i use one? i was going to just insert the notes row first, and then use a query using the LIKE() function on the note text to get the note_id, but some notes may be the same as others, so the note_id wouldn't be the correct one :( and i think just getting the last row of the notes table would be bad too incase someone happens to insert a row into that table at the same time
any ideas please?
thanks!
Data From XML To Table - Only Null Value Getting Inserted
Sep 23, 2014I tired to insert data from xml to a table .but only null value is getting inserted into the table. The query is attached below.
create table Detail_test1
(
DetailIdInt,
LaIdInt,
OcCodeVarchar,
BIdINT,
RateINT)
Declare @xml XML
set @xml='<ArrayOfBDetailLine>
[Code] ....
How To Use Table Inserted Within Exec In A Trigger?
Mar 17, 2008I like to use the table "Inserted" within exec(), but it doesn't work because the scope is different. Does anyone have some sort of solution to this problem? The reason I am doing it this way is because I have a table consist of 200+ columns of bit types that contains permission information (The worest design i have ever seen!).
Code Snippet
--gather column names
declare @ScreenPermissions nvarchar(256)
declare c_Permission cursor
for
SELECT [name]
FROM syscolumns
WHERE id = (
SELECT id FROM sysobjects
WHERE type = 'U'
AND [NAME] = 'ScreenPermissions'
)
and [name] like 'Allow%'
open c_Permission
fetch next from c_Permission
into @ScreenPermissions
while @@fetch_status = 0
begin
exec('INSERT INTO EmployeeInRoles (EmployeeID, RoleID) ' +
'select i.EmployeeID, r.RoleID ' +
'from inserted as i ' +
' inner join ScreenPermissions AS sp on sp.EmployeeID = i.EmployeeID and sp.' + @ScreenPermissions + ' = 1 ' +
' inner join Roles AS r on r.LoweredRoleName = Lower(' + '''' + @ScreenPermissions + '''' + ')' )
fetch next from c_Permission
into @ScreenPermissions
end
close c_Permission
DEALLOCATE c_Permission
How Data Is Inserted Into Table Internally
Nov 2, 2015I would like to know how data is inserted and selected from table internally. Like how buffers are created and how they are executed.
Eg. Table1
col1 col2 col3
1 a 1
2 b 2
I want to know how this data is inserted into tables. How many buffers are created ? Does it depends on the columns? How buffers are executed?
How To Display Column From Inserted Table
Jul 31, 2007Hi all,
I have created a trigger in SQLExpress which looking for any insertion to a specific table in a database:
Create Trigger Tg_Insert on [tablename]
FOR Insert
AS
Select * FROM Inserted
---------------------------------------------------------
Assume there is nothing wrong with this trigger as I have already checked the output with Query tool.
My question is how can I display the newly inserted data to the client? In my case, Console application.
I want to do something like Console.WriteLine("data from inserted table here");
How can I achieve this? FYI, I'm using VS2005 with sqlexpress 2005.
Thanks in advance.
Regards,
SHAH
Viewing The "inserted" Temp Table During Trigger?
Apr 6, 2001Having probs debugging trigger ... need to view the "inserted" table contents, how do I do this? Manuals are pants, any tricks folks?
View 1 Replies View Related