We have just installed a new SQL 2005 Clustered server and loaded integration services. However it appears that integrations services may not work properly in a clustered environment.
So can integration services be setup on a clustered SQL 2005 server?
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
I recently set up a SQL 7.0 cluster (active/passive) on a pair of Win2K boxes. I noticed that the SQLServerAgent would refuse to send system alerts to my e-mail account, yet net sent messages worked fine. I know I've set everything up properly, so I paid the $245 to speak with Microsoft.
The answer was found; their response follows:
{redacted}
CAUSE:
============
On a cluster an undocumented stored procedure is called by the Operator to send email and this causes it to fail. SQL Mail is not supported on SQL 7.0 clusters and any features depending on it will also fail.
RESOLUTION:
============
SQL 2000 does support SQL Mail on clusters with MS Office 2000 and up.
In SQL 2000 Books Online do a search for the following topics and include the quotes:
“Using SQL Server Tools with Failover Clustering”
Also you can workaround the problem by using a job that uses xp_sendmail to send the alert instead.
{END}
Now is that lame or what? Of all the functions you would expect to work in a failover cluster, you would think that e-mailing the operator in the event of a failure would be high on the list. Apparently, not so. Their official answer was to upgrade to SQL2000. Anybody care to guess the price on doing a dual CPU dual box cluster upgrade?
Now my question is this: The tech person was right, xp_sendmail does work fine. What I have wanting to do, and have been unable to do, is to write a TRIGGER that would fire whenever an error is logged by the SQL server. I have looked around, but could find no documentation on what table it is that receives error logs.
Does anybody know which table receives error messages? I'm wanting to write a trigger that exec's xp_sendmail so I get error alerts.
Hi all
I am busy looking at the WIndows 2003 Comptu Cluster setup (Well I am loading it)
And I am interested to know if any body has run SQL 2005 Enterprise on this platform before ?
I know that Windows Compute Cluster uses a JOB scheduler to run tasks and this can be customised for each task , to allow it to use more resourses or less .
I also know that SQL 2005 is much more capable of running cluster mode with database replication and log file shipping
I want to know is of I load SQL 2005 on a Clustered Compute setup will it handle the SQL jobs, database requests with out the scheduler.
The question might be a bit tricky but any help is appricated
Thanks
Sylvester
HI
What is the advantage of running SQL Server Integration Services on a cluster.
Regards, Balaji Thiruvenkataraju
I am currently at a site that has two instances on the same node. How do I help them get SSIS to work. I get the message that "SSIS will not work on a multy instance node". I this the final answer or is there a workaround? Tom.
View 4 Replies View RelatedI'm still new to SSIS packages and I'm NOT a developer. I am in the process of doing preliminary/prepatory work for migrating our SQL 2000 platforms to SQL 2005.
I am having a REAL headache with migrating/moving DTS packages from SQL 2000 to SQL 2005. Here are things that I know :
1. I know that some packages cannot be migrated due to ActiveX issues and other issues. Fine.
2. I know that I can install DTS backwards compatibility components on the server in order to be able to edit the DTS packages using a SQL 2000 DTS GUI. Fine.
3. I know that I can use the Migration wizard to migrate packages (and that some of them can't be migrated this way). Fine.
Here's what I don't know/or am conjecturing:
1. In a clustered environment, I have to edit the <%Install Path%>/90/DTS/Bin/MsDtsSrvr.ini.xml file to set the <ServerName> property to the Virtual Server name. Correct? Why can't M$ do this for me?
2. Do I HAVE to export the SSIS package to a .DTSX file in order to be able to edit it with Visual Studio? Is there ANY way around this?
3. If I am running in a clustered environment and I use the File System for storing packages, then the pacakges must be stored on a shared volume, right?
4. I did not find SQL Server Integration services on the B- (Passive) node. Do I have to install it separately onto the B server (much like having to install the Client Tools)?
If anyone has some guidance or tips on running SSIS in this brave, new, wonderful world, I would sure appreciate it.
And yes, I am going to go out right now and order a new book on SSIS.
Regards,
hmscott
OK so I am aware that the SSIS service can be clustered relatively easily but my problem is a bit more complex I believe.
I have an ActiveActiveActive 3 node cluster running Windows 2003 sp1 all running SSIS packages. What I need is a solution to having an instance fail to another node and still be able to run scheduled SSIS packages through the SQL Agent.
The solution that I have come up with is to have a single network share for all three instances of SSIS running locally on the individual nodes. I have removed the ability for SSIS to look in MSDB by altering the config file and reference only the Packages share on the network for accessability. They all share the same config file on the share as well. The share structure looks something like this simplified example.
\server1SSISConfiguration
\server1SSISPackages
\server1SSISPackagesInstance1
\server1SSISPackagesInstance2
\server1SSISPackagesInstance3
Once I change the registry to point to the config file all three instances can access the Instance1, 2 or 3 directories.
This works ok for the jobs, and I can access the stored packages under the file system folder only if I'm remotely connected to that particular physical server hosting the service or on the console. The problem I am having though is when users or I attempt to access the SSIS Engine through SSMS from our locale machines. It seems as though SSMS is having trouble with the passthrough of the directory information. On the share I obviously have permissiosn to access the directory structure (full control to be exact) because I can get to it when I access it from SSMS on the server.
This is the error I get...
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The storage location for the folder "File System" cannot be accessed. (MsDtsSrvr)
DETAILS:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetChildren()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren()
===================================
The storage location for the folder "File System" cannot be accessed. (MsDtsSrvr)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetDtsServerPackageInfos(String sPackageFolder, String sServerName)
at Microsoft.SqlServer.Dts.SmoEnum.PackageEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
Any work around or suggestion would be appreciated.
Thanks,
Zach
Hi,
I have been battling the whole day to get my project working on our sql cluster.
My project contains file system packages parent(control) packages etc. I cannot get any package to execture after deploying and configuring the packages with the manifest.
When I try to execute even a simple package, i get the following error:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
11/09/2007 15:06:59,SGA Staging ETL import,Error,0,BRY-CLUSSQL-1,SGA Staging ETL import,(Job outcome),,The job failed. The Job was invoked by User sgainterface. The last step to run was step 1 (Test).,00:00:00,0,0,,,,0
11/09/2007 15:06:59,SGA Staging ETL import,Error,1,BRY-CLUSSQL-1,SGA Staging ETL import,Test,,Executed as user: SUPERGRPSvcSQL. ...on 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 3:06:59 PM Error: 2007-11-09 15:06:59.45 Code: 0xC0011007 Source: {8B6231A9-8E5B-47BC-B54F-6A448B93B085} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2007-11-09 15:06:59.45 Code: 0xC0011002 Source: {8B6231A9-8E5B-47BC-B54F-6A448B93B085} Description: Failed to open package file "\10.202.29.35SGA Import ConfigsSGA Staging Deployment PackagesActive PackagesSGA ETL Step 1.1 - Prepare Branch Master File.dtsx" due to error 0x80070005 "Access is denied.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML f... The package could not be f... The step failed.,00:00:00,0,0,,,,0
Has anyone ever gotten this error? Is it permission related? I have already granted the sql user for this project ownership over the database but I think that the agent does not have permission to access those file system packages. This might be a problem since it is a file system package...if so, how do I grant the agent access to an NT file system?
Regards
I have the following setup:
1. Clustered Microsoft SQL Server 2005 (Build 3790: Service Pack 2) with .net 2.0 - Server A
2. Separate server containing the SSIS services (Per Microsoft - SSIS isn't cluster aware). - Server B
I am getting the following error when I run a SSIS package through a scheduled job on the Server A:
Description: The task "Set dynamic file name variable" cannot run on this edition of Integration Services. It requires a higher level edition.
I found the following post that fixes the issue, but I don't want to install SSIS on the SQL Cluster (Server A) because it isn't cluster aware.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=67276&SiteID=1
This package runs fine locally from Visual Studio or from Server B. All of my other SSIS packages run fine on the Server A through the SQL Agent. This package fails on a script task that is setting some dynamic variables. Do I need to install some additional components or service packs to SQL Server on Server A?
I don't want to install SQL Server on the Server B and run the jobs through that agent because we don't have the money for a separate license.
How Do I work on SSIS? Where to start...........???
View 7 Replies View RelatedHi all.,
I am new to SSIS,if it is a wrong place to post this, please forgive me.
How to work with SSIS., I need to use SSIS in my project., Please can any one tell a link to learn how to work with SSIS.,
I am looking forward for a link.,
the book "microsoft sql server 2005 integration services" by kirk haselden claims you can download examples and source code at www.samspublishing.com
er no
what happens is this
go to the site
look for the 'downloads' link
see there isn't one
search for authors
h etc.... lose a few minutes of your life
find the book
yay
it forces you to sign up for an account in order to get the samples - outrageous
prepare for endless spam from sams
sign up
click on download samples
find the configedit folder
load into vs
run it
it doesn't work!!
thanks
Warning 1 The referenced component 'SourceLibrary' could not be found.
Warning 2 The referenced component 'SourceGrid2' could not be found.
Error 3 Unable to find source file 'K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigurationsEditorinDebugConfigurationsEditor.exe' for assembly 'ConfigurationsEditor.exe', located in '[TARGETDIR]' K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditSetupConfigEditSetupConfigEdit.vdproj SetupConfigEdit
Error 4 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 9 7 ConfigEdit
Error 5 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 10 7 ConfigEdit
Error 6 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 87 40 ConfigEdit
Error 7 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 11 15 ConfigEdit
Error 8 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 24 17 ConfigEdit
Error 9 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.cs 25 11 ConfigEdit
Error 10 The type or namespace name 'SourceGrid2' could not be found (are you missing a using directive or an assembly reference?) K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlConfigEdit.Designer.cs 318 17 ConfigEdit
Error 11 Metadata file 'K:MASSoftware and ToolsSamplesSSISKirk Haselden bookSamplesSRCUtilitiesConfigEditConfigEditControlinDebugConfigEdit.dll' could not be found ConfigurationsEditor
Warning 12 Could not resolve this reference. Could not locate the assembly "SourceGrid2". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors. ConfigEdit
Warning 13 Could not resolve this reference. Could not locate the assembly "SourceLibrary". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors. ConfigEdit
one could argue that ssis should have a config editor supplied with it, instead of having to go into notepad
Can I install only [Bus....integ.. dev.... st..]. on my machine without SQL 2005? I have a sybase database management system.. can I work with SSIS?
Can it extract something from IBM DB2/DATACOM/LOTUS NOTES/VSAM/???
pl give me answers with justifications!!!!
Hi,
I am completely new to SSIS. Is there a way to get SSIS to work with a SQL server 2000 database. Is there a SQL 2000 Add in that can be utilized. Basically I want to save the SSIS package to the SQL 2000 database and schedule it to run.
Please let me know if you want any more details.
thanks in advance.
Hello,
I have configured Kerberos delegation for several web services. One of the web service calls SSIS packages, but the packages don't run with the expected impersonate user : the package starts with the imporsonate user, but continue with ASPNET user (which is not allowed to execute SSIS and connect to DB).
If the web service is called directly (no delegation), SSIS packages run with the correct user. It looks like than there is an autenthicate issue, but kerberos is configured and web services can run from one to another with the impersonate user. The issue occured only when I call SSIS packages.
Here is a extract of the SSIS log file :
Code Snippet <dtslog>
<record>
<event>PackageStart</event>
<message>Beginning of package execution.
</message>
<computer>WKS-GE-BRAZILIA</computer>
<operator>WKS-GE-BRAZILIAPascal.Brun</operator>
<source>ImportMonthlyCSV</source>
<sourceid>{D053CB99-FDE4-492D-83BC-821E1B34704B}</sourceid>
<executionid>{EA9C1929-4131-4FDD-A6FC-560E01A65536}</executionid>
<starttime>09.08.2007 17:31:02</starttime>
<endtime>09.08.2007 17:31:02</endtime>
<datacode>0</datacode>
<databytes>0x</databytes>
</record>
<record>
<event>OnError</event>
<message>SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Data Warehouse" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
</message>
<computer>WKS-GE-BRAZILIA</computer>
<operator>WKS-GE-BRAZILIAASPNET</operator>
<source>Import CSV</source>
<sourceid>{284D3166-F372-4B03-86C1-75A4D8DC9A5C}</sourceid>
<executionid>{EA9C1929-4131-4FDD-A6FC-560E01A65536}</executionid>
<starttime>09.08.2007 17:31:02</starttime>
<endtime>09.08.2007 17:31:02</endtime>
<datacode>-1071611876</datacode>
<databytes>0x</databytes>
</record>
...
Any help is required.
Thanks in advance.
I have a query that joins with different table using link server in the database. SSSI doesn€™t take the query. How to make the SSIS package query to use the link server in the data base ?
thanks
I would like to setup SSIS project so that multiple developers can work on same project. I am having issues with protectionlevel properties while another developer opens the package created by other developer.
Can anyone guide me on setting up project so that multiple developers could open the package and run (not simaltaneously though). Also tips on setting up source safe or team foundation will be appreciated!
Thanks
Mahesh
Hello All,
I am trying to run the below query in SSIS, However it does not work, but when I try to run the same query in Oracle client it works fine. Here is the following query:
select 'AAA-'||OWNER AS SOURCE,
table_name,
column_name,
SUBSTR(data_type,1,50) DATA_TYPE ,
SUBSTR(decode(data_type,'NUMBER', DATA_PRECISION, DATA_LENGTH),1,20) DATA_LENGTH
from all_tab_cols
where owner='XXX'
ORDER BY TABLE_NAME, COLUMN_ID
Here ARE the following errorS I get when running from SSIS:
[ORA_AAA_XXX [147]] Error: There was an error with output column "SOURCE" (612) on output "OLE DB Source Output" (157). The column status returned was: "The value could not be converted because of a potential loss of data.".
[ORA_AAA_XXX [147]] Error: The "output column "SOURCE" (612)" failed because error code 0xC0209072 occurred, and the error row disposition on "output column "SOURCE" (612)" specifies failure on error. An error occurred on the specified object of the specified component.
Any help?
Regards,
Raju
We made SSIS package in dev environment in windows 2008R2 and SQL server 2012. Same packages were placed on SAN disks in cluster environment and are invoked with security contexxt of admin user and wih dtexec utility ( we call this using an sp). rarely but procedure completed i see the log text file by SSIS package and find the return code 5 means package is unable to load. i canst found what are the exact reasons for return code 5.
View 2 Replies View RelatedI€™m importing a Flat file (delimited text) into a sql server database table and trying to trap any import errors in another output Flat file.
I create a Flat File Source task. After tweaking the task, the Source €śError Output€? tab shows all the input columns and all €śError€? and €śTruncation€? values are set to €śRedirect row€?
Next I add a €śSQL Server Destination€? task and connect the Source green arrow to it.
Finally I add a Flat File Destination task (error Output task), connect the Source red arrow to it, click €śOK€? in the €śConfigure Error Output€?, and finally add a connection manager to the Error output task. When I look at the Mappings tab of the Error Output file it shows only three available input columns: €śFlat File Error Output Column€?, ErrorCode, and ErrorColumn
I€™m not sure where they came from but that info is not very useful to me. I want to know which line the error occurred on as well as the bad column(s). If nothing else, I need to see at least the actual row that was bad. How can I get that information?
Barkingdog
Dear all,
I've been searching the article for error handling in SSIS but seems no article have same problem exactly as mine. In my package there's container, it contains Data Flow task and some of Script tasks. I put an error precedence from Data Flow task into Script task that contains script for log an error that might be occured. The Data Flow task imports data from flat file into SQL Server 2005 and I've set a semicolon as the column delimiter. Unfortunately there is a data in flat file that had one column contain semicolon as its value.
This would trigger an error and I hope the error would be logged into a table as I wrote inside Script task. But it didn't work. The error precedence won't work, the package stop in flat file source instead. I've been trying the event handler but it didn't work either. Maybe I got wrong implementation, anybody can help me explain the error handler and solve the problem ?
Here is the capture of my package, since I didn't know how to attach the picture in this forum.
Thanks in advance.
Best regards,
Hery
I'm trying to figure out a solution for posting financial transactions against our Payflow Pro (Verisign) payment gateway (web service) using SSIS. The process I have in my mind goes like this...
1.) Select the appropriate records from our financial system DB.
2.) Iterate through each record and post the pertinent values against the payment gateway web service.
3.) Create log files for successful and failed transactions.
The log files would then be manually imported into our financial system.
Thanks in advance.
If in BIDS I set "work offline" on to change an SSIS package, the connections for source and destination had already been build. Can I move this package to another server and execute it without going into BIDS and changing the switch back?
View 7 Replies View RelatedGreetings,
I need to install the SSIS components on the referenced database server. I believe the SSIS components are cluster aware, so I was planning on just doing add/remove and selecting the components. Rather than breaking the cluster apart to patch the components back to SP1, I was thinking of just running the SP2 install right over the top of the running cluster to bring everything up to SP2.
I'm looking for any suggestions/comments on whether this is the proper way to proceed or if I'm going to have a problem.
TIA
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Thanks
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
When I use the following execute statement where I am "Hard Coding" in the parameters, the stored procedure runs successfully and it places the data into the table per the stored procedure.
SQLStatement: dbo.sp_ml_location_load @system_cd='03', @location_type_cd=Store;
However, the @system_cd parameter can change, so I wanted to set these parameters up as variables and use the parameter mapping in the Execute SQL Task.
I have set this up as follows and it runs the package successfully but it does not put the data into the table. The only thing I can figure is either I have the variables set up incorrectly or the parameter mapping set up incorrectly.
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
Here is my set up, what is wrong here:
I Created these Variables:
Name Scope Data Type Value
system_cd Locations String '03'
location_type_cd Locations String Store
I added these parameter mappings in the Execute SQL Task
Variable Name Direction Data TypeParameter NameParameter Size
User::system_cd Input NVARCHAR@system_cd -1
User::location_type_cd Input NVARCHAR@location_type_cd -1
I used this SQLStatement: EXEC dbo.sp_ml_location_load ?,
It runs the package successfully but it does not put the data into the table.
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using the following line command "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
Hi There,
I am trying to set a variable with this default value using expression. This works in tsql but doesn't in ssis. Can anybody tell me what is wrong with this?
dateadd("dd", -1, datediff("dd", 0, getdate()))
Thanks.
At one of my accounts I'm using SQL 2008r2 and SSIS in an DWH solution. Today I wanted to created a dynamic sql statement in one of the packages. The dynamic part is in the where-clause a sql query I use. I want to set the values for this clause dynamically. Therefor I created a user variable (named 'Filter') which should get it´s value at run-time.
/DTS "MSDBProdMy Package" /SERVER "My-Server" /CHECKPOINTING OFF /REPORTING EW /SET "Package.Variables[User::Filter].Properties[Expression]";" where [Starting Date] < '2008-09-01 00:00:00.000' "
However when I execute this package with dtexecui it doesn not use the value specified after the /SET parameter, but instead uses the value specifiied at design time. I get the same when I add the execution of ths pacakage as a sql server job step (type SSIS). I would expect that value specified after the /SET parameter would overwrite the valus specified at design time, but I don't see that happening.
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?