Can Use Fieids Of Diffirent Datasets In A Matrix ?
Oct 29, 2005Can Use Fieids of diffirent datasets in a matrix ? SUM(Fields!a.value) is invalid?
View 4 Replies
ADVERTISEMENT
Matrix Reports With References To Multiple Datasets
Oct 4, 2007Hello and thank you for the help in advance.
I know this has to be possible maybe I am just missing somthing.
I am creating a matrix report which will compare year by year quotes to orders The issue is quotes and orders each have their own dataset. I will be pivoting on JobType which is in both datasets and spelled the same. Is there a way to do this or will I have to figure out how to union the tables? If not possible why does it allow you to name the dataset in the expression?
Thanks, Leo
Reporting Services :: Add Two Different Custom Calculated Fields From Two Different Datasets In Matrix
May 22, 2015I am not sure if this is possible or not, we have two datasets and each one has an additional calculated field which breaks the value JobBilledExVAT into three years.
So it reports for example how much we billed in May 2015, 2014 and 2013.
I have got the table to display this when reporting on one dataset by grouping by year
The datasets both look similar to thisÂ
SELECT
 Practice.ibvSalesByJob.JobBilledExVAT
 ,Practice.ibvSalesByJob.[Year]
FROM
 Practice.ibvSalesByJob
 INNER JOIN Practice.idvJobType
[Code] ...
The calculated field isÂ
=Switch(Fields!Year.Value = Parameters!Year.Value ,"15", Fields!Year.Value = Parameters!Pre1Year.Value ,"14", Fields!Year.Value = Parameters!Pre2Year.Value ,"13")
The field I am looking to add together is below
=Sum(Fields!JobBilledExVAT.Value)
If I do the below on the dataset associated with the matrix it displays the sum for each year correctly, I would however like to add the Sum(Fields!JobBilledExVAT.Value) from a different dataset (ABS1M) for the relevant year.
I tried this
=Sum(Fields!JobBilledExVAT.Value) + Sum(Fields!JobBilledExVAT.Value, "ABS1M")
However this adds 2015, 14 and 13 from ABS1M and doesn't add them individually if that makes sense? With the calculated field it only shows Year under the main dataset heading not 15, 14 and 13 separately.
I was think of using LOOKUP however I don't know how this would work as 15, 14 and 13 are not displayed under the dataset.
Mapping One Table To Another In Diffirent Databases
Jan 14, 2004I want to map a table1 in one database to a table2 in another database. That way I can populate the table2 with the information that table1 has. How would you go about doing this. Very new at this and need help! Thanks alot .
View 4 Replies View RelatedTemporary Table In 3 Diffirent Stored Proc
Mar 30, 2004I know there maybe something similar of what im asking for but i just cant find it.
I have 3 Stored procedure.
SPA - create a temporary table "sp_getListOfChildren"
SPB - insert the data into the temp table "sp_InsertCategoriesFound"
SPC - display the list of categories i found "sp_ListingAvailableCategories"
process:
SPA call SPB and SPC call SPA
my problem is in the SPC. it seems that the table doesnt exist anymore when i do a select but in the message tab of my sql analyser i can see that the table have some data before executing that store proc..
Invalid object name '#TblTempCat'. for my SPC !! ??? why.. how do i detect a temp table in diffirent stored procedure per user and as to be temp table.. for multiple access.. "WEB"
============MY "SPC" CODE=============
alter PROCEDURE sp_ListingAvailableCategories @CurrentCategoryID AS uniqueidentifier
AS
exec sp_getListOfChildren @CurrentCategoryID
select * from #TblTempCat
select * from TblCategories where CatID not in (select CatID from #TblTempCat) and CatId <> @CurrentCategoryID
Reporting Services :: SSRS Matrix - Add A Column In A Matrix With A Variance
Aug 6, 2015I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing,
(
(Fields!Amount.Value)
/Previous(sum(Fields!Amount.Value))
)
)
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category")
should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
A Matrix Above Two Charts. Right Chart Moves Depending On Matrix Growth ... ???
Jan 10, 2008I have a Matrix table that expands to the right when choosing an amount of months to be shown. Under this matrix I have to Charts. The two charts are situated together, that is no space between them, and to the left of the report.
Now, if I choose a lot of months, say three years the matrix diagram will be huge to the right. The problem I have is that the second diagram, the one on the right, moves to the right depending on how big the report gets, and this is not good at all. The two charts are supposed to be all the way to the left.
How? Why does the right chart move?
Thanks in advanced
Kind Regards
Matrix - Create Two Rows In A Matrix
Nov 26, 2007Hello.
I hope to explain myself well - I want to make a matrix with two rows.
Lats say my data is this:
I hava a list of months and in every month I have a number of pepole and there age.
How can I show this in a matrix?
It need to be in a matrix since I need the columns to expand acording to the month but I don't know how to create two diffrent rows in my matrix.
The data should look like this:
10/06 11/06 12/06 01/07 02/07 03/7 04/07 .....
num 5 1 2 5 4 5 7 .....
age 16.1 25 18.5 14.8 25.5 20.5 18.5 .....
Thanks for any help.
Filtering Through Matrix Or Groups In Matrix
Aug 21, 2007I have a report thats fully functional. I just want to add a filter so that my "Visits" field only displays the Visits per day that are less then 6. When i try to filter out the matrix or the group, it tells me the datatypes are different . Something about int32. Its in a matrix, but i have seen this happen in a table too, so i guessing thats not the problem. I just want to be able to display the information for Sales Reps with less then 6 Visits. Any help, will be greatlly appreciated.
View 1 Replies View RelatedAdding Columns To A Matrix Report That Don't Belong To The Matrix Columns Groups
Jan 2, 2007Can we do this?
Adding more columns in a matrix report that don€™t
belong to the columns drilldown dimensions€¦
That is, for example, having the following report:
Product Family
Product
Country City Number of units sold
Then I
would add some ratios, that is, Units Sold/Months (sold per month) and other that
is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some
columns should be precalculated prior to the report so do not get into it, the
real problem I don€™t see how to solve is adding one or two columns for showing
these calculated column that doesn€™t depend on the column groups but they do
for the rows groups€¦
Any guidance
on that?
The only
way I am seeing by now is to set it as two different reports, and that is not
what my client wants€¦
Many
thanks,
Jose
Second Matrix Blanks Out First Matrix
Jun 8, 2007Hello,
I have a matrix in my report that is based on an MDX query. I copy-paste the matrix and then see the two matrices in the report and all is fine.
I then insert a group into the second matrix. When I run the report the second matrix appears as I would expect, but the cells are blank in the first matrix. Sometime all the data cells are blank, but not the totals.
I tried a similair thing with a table. I added a table based on the same MDX dataset and the cells in the matrix were also then blanked out.
I made sure that the matrices were not sitting on top of each or even in the same space.
The goal here is to show the same dataset but with different groupings. I thought of doing drilldowns, drillthroughs, etc. but this is the way they want to see the data.
Any ideas what I am doing wrong?
Thank you for the help.
-Gumbatman
Where Did The Datasets Go In .NET 2.0???
Jul 5, 2006I typically use DataAdapters and Datasets from the toolbox when connecting to a SQL database. Since switching to VS 2005, I am not able to find (or add) these items to the tool box for web site development.
Any ideas on how I can get them back? Or is there a better alternative to retrieving the data so I can process it? Any help or suggestions would be appreciated.
Thank you
About Datasets
Apr 19, 2007Can anyone advise me on how to view the contents of a dataset in VS dotnet 2003..
I had filled a dataset from a query...But i don know what happens after filling the qry results.It might be helpful if someone tells me to view the contents of the dataset
Ado Datasets
Jun 6, 2007hi
i am using older ado datasets in a borland 6 program.
i need to retrieve the data per record count....
example is that i need all 1000 records but i only want to retrieve them 100 at a time....
how will i accomplish this?
Datasets And SQL Injection
Oct 25, 2007I have become a big fan of the datasets in Visual Studio 2005. I usually create the SQL for each method in the table adapter; however, I am wondering if there is any 'built-in' functions in the C files for sql injection prevention? I have read that using stored procedures is a good method for prevention. Should I be using SP rather than SQL within my methods in the data table?
View 5 Replies View RelatedWorking With Datasets
May 3, 2007Hi,
Is there any possibility of combining data from two datasets to a single report item. If there is any thing that we can do, can any one please tell me what to do, so that my problem will be solved.
Thanks
Rajeev
Large Datasets
Mar 27, 2008Hi,
I have a table which has over 450,000 records in it, I have now split this into 4 so each table has around 100,000 records in it but I'm still having the problem of the data being returned really slowly.
What I need to do to this data is group it by a code and show the total for each code for every month of the year (this is currently based on one column and selecting the data accordingly). I have created views and put some indexes onto my table but the results are still being returned slowly. Does anyone have any suggestions of how I can speed this up?
Thanks
Gemma
Datasets And Iff Statements
Sep 6, 2007
Hello experts,
I have a report with four different datasets that slice certain record by different days of the week. I can do the individual summing for each dataset by putting a , "datasetname" at in the expression. I also have 4 matrixes in the report that are grouped on certain transactions within each timeslice. My problem is that if I use the dataset name in the fields, the groups get ignored. Do I have to put the dataset name in each group expression? for example, here is my group expression...
Code Snippet
=iif(Left(Fields!TestName.Value,4)="VTAM","VTAM Logon",
iif(Left(Fields!TestName.Value,4)="CICS","VTAM Logon",
iif(Left(Fields!TestName.Value,4)="Shaw","SHAW Main Menu",
iif(Left(Fields!TestName.Value,7)="Inquiry","Inquiry Menu",
iif(Left(Fields!TestName.Value,6)="Search","Search Menu",
iif(Left(Fields!TestName.Value,6)="SEAX A","SEAX Auxiliary Search Menu",
iif(Left(Fields!TestName.Value,8)="SEAX - B","SEAX",
iif(Left(Fields!TestName.Value,4)="STLN","STLN","Other Value"))))))))
Not sure where I put the dataset name in this.
Thanks,
C
Joining Two DataSets
Jan 2, 2007 How do you join two datasets in reporting services... one from sql and another from oracle?
Thanks
Cached Datasets?
Aug 8, 2007Hello all,
I have a report with a table and a chart. It uses dataset1 as the data source.
All works fine.
I create a new dataset called dataset2.
The queries are exactly the same. The only differences between the 2 datasets is the database server and the fact that one of the columns is a smallint (in dataset2) and an int(in Dataset1)
I change the datasetName property of both the table and the chart to use dataset2.
When I run the report I get a conversion error stating that there was an overflow of int2 while using dataset1. I have verified the report is not using dataset1 anywhere. If I delete dataset1 and run the report the error goes away. If I add it back, I get the error again. Why is the report looking at dataset1 if it is not referenced at all in the report? Does SQL RS cache the datasets and verify each when it compiles?
regards,
Bill
Relationship Between Two Datasets
Apr 29, 2008If I have a dataset that has ID and CODE, and another dataset that has CODE and DESCRIPTION, is it possible to relate these two datasets to one another so I put the ID and Code in columns 1 and 2 and then put the related DESCRIPTION in column 3 on the report table layout? In other words, can you "JOIN" two datasets, or must all that be done in the query and create a unified dataset for the report contents?
View 6 Replies View RelatedMultiple Datasets
May 31, 2007I have a report that I have created with multiple subreports and datasets. There should be a better solution so I am asking the question here.
The report should display like this:
Object
Object Title
Budget
Curr-Spent
Ytd-Spent
Ytd-Encum
Post-Ytd
Balance
% Remaining
4100
EMPLOYEES
$380.00
$250.93
$343.67
$0.00
$0.00
$61.33
15.94%
4102
EMPLOYEES - TEMPORARY
$149.00
$110.75
$139.70
$0.00
$0.00
$47.30
30.16%
4201
EMPLOYEE BENEFITS
$138.00
$73.16
$12.60
$0.00
$0.00
$32.40
25.28%
Each column represents another dataset.
Each column right now is a subreport so I can use the object as a parameter to the subreports dataset. Each column needs to have the object as a parameter.
Is there a way I can pass a field from the first dataset as a parameter for the next dataset without using subreports?
Joining Two Datasets?
Mar 8, 2007Hi All,
I have got two datasets. Some 'normal' rows with state values and an addtional dataset with the translation from state value to plain text (value / text pair).
A table object is attached to the first dataset, but I would like to show the plain text from the second dataset in a group header. So I'd like to do some kind of 'look up in another dataset'.
I wasn't able to find a function that could help me solve this problem. Does anyone has any ideas on this?
Kind regards.
Connect To SAS Datasets
May 4, 2006Is it possible to connect to SAS dataset using MS SQL Server 2005? If yes, then please explain how do I access SAS data source.
View 1 Replies View RelatedUsing Two Datasets In A Report
Feb 25, 2008hello everyone!
i have a report in which i use two datasets
the problem is that when i was using only one, there wasn't any scope argument you know, to tell in which dataset i am , because there was only one and all fields and cells in my table returned me the correct values
but as soon as i add the second data set and i drag and drop the datasets fields in my table
instead of having for instance
Code Snippet
=Fields!Consultant.Value
or
Code Snippet=(Fields!Consultant.Value, "dataset1")
it automtically applies the function "first"
Code Snippet=First(Fields!Consultant.Value, "dataset1")
and i don't understand why
please can you give me precious help on this
because it returns me the name of the first consultant only and if i deleter the function first in the expression, the report doens't work anymore
2 Datasets In One Report?
Nov 29, 2007Dear Experts,
I have a problem regarding my report.
Can we use 2 datasets in one report (tabular or chart, either one)?
my report get its data-fed from OLAP database (Cubes) and Oracle tables.
Let say the cube contains the actual sale (all aggregated and query using MDX) and the Oracle table contains the budget value for specific period.
And I am trying to construct a tabular like this:
date item type Revenue Budget Actual (Sale - Budget)
Jan calls regular 2000 1800 200
Jan calls super 3000 2500 500
Feb calls new 1000 900 100
Mar calls super 4500 4000 500
..... and so on
The data for date, item, type and Revenue are available in the OLAP (cubes) and the Budget value is available in Oracle table and we can't afford to transfer the Budget value to the cube.
Is this possible in SSRS? Please let me know if more information needed.
Thanks very much
2 Datasets For 1 Table
Sep 28, 2007Hi !
I'm creating a report with SSRS (2005). In that report I have a table, and in that table I need to put fields from two different datasets. But I don't know how to link those both datasets (because if I don't I get a cartezien product)...
Could someone help me please ??
PS : Excuse my poor english please...
Using 2 Datasets In The Same Table?
Jul 31, 2007is this possible? i need to make a report that accesses two different tables, one for user activity and the other for the number of reports that user has done. the report information is in a different database however so i have to use different datasets. is there a way to use both databases in the same table? all i need is the one field from the reporting one and they can be linked by the user id...
View 1 Replies View RelatedFiltering Datasets
Jun 18, 2007I have the following report
1. A mulitvalued parameter State with WA, SA, QLD, TAS etc
2. A single value parameter of Top n - 10, 20, 40
The user will select the state and the top number to get the top n sellers off that state or a combination off states.
I have a dataset with the following cutdown version off SQL
Declare @TopNo Int
Set @TopNo = @Param_TopNo
Set Rowcount @TopNo
SELECT CreateDate,SaleDate,sales.Consultant, State, Sum(Value) As Winbacks
FROM dbo.tbl_kpi_sales
GROUP BY CreateDate, Consultant, State, SaleDate, Winbacks
ORDER BY Winbacks Desc;
Set RowCount 0
When I execute it and select 'Select all' from the mulitvalued state parameter with a Top N value off 100 the query returns all the top 100, which is correct, however when i select just a single state ie WA it only returns me the records which were in the TOP 100 off all states when it should be filtering it by only the state I choose and returning the 100 records...For some reason it when a single state is selected or a combination off states the dataset is already narrowed down and doesnt reexecute the query for just that state...Can someone suggest how to overcome this, maybe a table filter ?
Combining Two Different Datasets Into One
Mar 26, 2008
I am relatively new to MS Reporting and I can€™t figure out how to do something that seems rather simple.
I need to somehow combine two different SQL statements into one dataset. The two different SQL statements are the same, except for the Select list and the Where.
Example,
1st Dataset:
SELECT dbo.claimtable.grpnum_plancode, dbo.plancodetable.plandescription,
SUM(dbo.claimtable.charges) AS Charges,
SUM(dbo.claimtable.benefitpaid) AS BenefitPaid
FROM dbo.claimtable INNER JOIN dbo.plancodetable ON
bo.claimtable.grpnum_plancode = dbo.plancodetable.grpnum_plancode
WHERE (dbo.plancodetable.plantype = 'Med') AND (dbo.claimtable.paiddate BETWEEN @BeginDate AND @EndDate) AND (dbo.claimtable.paidflag = 'Y') AND (dbo.claimtable.grpnum IN (@GroupNumber))
GROUP BY dbo.claimtable.grpnum_plancode, dbo.plancodetable.plandescription
2nd Dataset:
SELECT dbo.claimtable.grpnum_plancode, dbo.plancodetable.plandescription, COUNT(distinct dbo.claimtable.claimid) AS ClaimCount
FROM dbo.claimtable INNER JOIN
dbo.plancodetable ON dbo.claimtable.grpnum_plancode = dbo.plancodetable.grpnum_plancode
WHERE (dbo.plancodetable.plantype = 'Med') AND (dbo.claimtable.paiddate BETWEEN @BeginDate AND @EndDate) AND (dbo.claimtable.paidflag = 'Y') AND (dbo.claimtable.backoutflag = 'N') AND (dbo.claimtable.grpnum IN (@GroupNumber))
GROUP BY dbo.claimtable.grpnum_plancode, dbo.plancodetable.plandescription
I tried just referring to the different dataset within the report table, but it only provides it at the aggregate level and I need the claimcount at each individual claimtable.grpnum_plancode level.
I tried a union statement, but get a variety of errors.
Any help would be greatly appreciated.
[Almost Resolved] SqlDataReader Vs. DataSets
Feb 1, 2008Hi,
I am pretty new to harcore ASP.NET and .NET in general but I know the basics of the language and stuff like that. Basically I used to be a hardcore object pascal Delphi developer doing Windows Applications but have now moved to .NET world. The reason I posted this question here is I couldn't find any other specific place to ask so here it goes.
To get me started with good programming source and practices I downloaded the ASP.NET TimeTracker Starter Kit and after some modificaion in connection string (using SQL 2005 Developer edition not the Express one) I have managed to make it work. Things done in there are pretty interesting way by using a delegate to retrieve data and present it using databound controls.
As much simple as it sounds I am more of a fan of not using too many databound controls except in dropdown box, list box and stuff like that. So basically I need to develop DataAccessLayer (DAL) in such a way that it's useful for both Windows and Web application. So with my research I found that I should be using DataSets in the DAL because they are serializable and thatz what Web Applications & Services love over using SqlDataReader. Other advantage of using DataSet is to use ForEach syntex over While Loop in SqlDataReaders. So below is some code I extracted from the TimeTracker Starter Kit to get me started.
I also noticed that the return result is a list array of certain object, in this case Category. So does it mean that it can be used in frontend using ForEach syntex? How can I convert the code below to use DataSets over SqlDataReader? Private Delegate Sub TGenerateListFromReader(Of T)(ByVal returnData As SqlDataReader, ByRef tempList As List(Of T))
Public Overrides Function GetAllCategories() As List(Of Category)
Dim sqlCmd As SqlCommand = New SqlCommand()
SetCommandType(sqlCmd, CommandType.StoredProcedure, SP_CATEGORY_GETALLCATEGORIES)
Dim categoryList As New List(Of Category)()
TExecuteReaderCmd(Of Category)(sqlCmd, AddressOf TGenerateCategoryListFromReader(Of Category), categoryList)
Return categoryList
End Function
Public Overrides Function GetCategoryByCategoryId(ByVal Id As Integer) As Category
If Id <= DefaultValues.GetCategoryIdMinValue() Then
Throw New ArgumentOutOfRangeException("Id")
End If
Dim sqlCmd As SqlCommand = New SqlCommand()
AddParamToSQLCmd(sqlCmd, "@CategoryId", SqlDbType.Int, 0, ParameterDirection.Input, Id)
SetCommandType(sqlCmd, CommandType.StoredProcedure, SP_CATEGORY_GETCATEGORYBYID)
Dim categoryList As New List(Of Category)()
TExecuteReaderCmd(Of Category)(sqlCmd, AddressOf TGenerateCategoryListFromReader(Of Category), categoryList)
If categoryList.Count > 0 Then
Return categoryList(0)
Else
Return Nothing
End If
End Function
Private Sub TGenerateCategoryListFromReader(Of T)(ByVal returnData As SqlDataReader, ByRef categoryList As List(Of Category))
Do While returnData.Read()
Dim actualDuration As Decimal = 0
If Not returnData("CategoryActualDuration") Is DBNull.Value Then
actualDuration = Convert.ToDecimal(returnData("CategoryActualDuration"))
End If
Dim category As Category = New Category(CStr(returnData("CategoryAbbreviation")), actualDuration, _
CInt(returnData("CategoryId")), CDec(returnData("CategoryEstimateDuration")), CStr(returnData("CategoryName")), _
CInt(returnData("ProjectId")))
categoryList.Add(category)
Loop
End Sub
Hope this makes sense. Sorry if I have posted this in a wrong section..!
Cheers,Nirav
SqlDataSources Or DataSets - Confused
Apr 10, 2008I was watching the "To Do List" AJAX video created by Joe Stagner and while watching the video I noticed (in designer) Joe use a Dataset to populate a Gridview and this got me thinking. I have a few gridviews in my app at work that just use SqlDataSources, and they seem to work fine, but is it better to use Datasets ?
View 3 Replies View RelatedSelecting Fields From 2 Datasets
Mar 16, 2006Need syntax for selecting fields from 2 different datasets in one report.
Each dataset connects to a different server.