On sqlserver 2000 transactional replication:
How would I best go about changing a published table's column from smallint to int? I could not find anything about it in BOL or MS.com. I do not think EM/Replication Properties allows the change. I suspect I have to run "Alter Table/Column" on the Publisher and each Subscriber the old-fashioned way. Is that true?
Thanks!
Dear All,
i've one database replicated from production server.
now i need to change one perticular table column datatype.
what steps i need to follow to do this?
thankyou very much
Arnav
Even you learn 1%, Learn it with 100% confidence.
Hope to be my last question.
I used Transacational with update sub method. When adding new column to replicated table. Do I need to generate new snapshot again? Just want to know how can I apply the new schema to subsciber DB without doing all regenerate snapshot, recreate all tables and bulk copy.. Please help
Hi All
I want to retrieve the data type of table column and validate the input data whether same as data type of table column before insert into database. Any suggestion?
I use asp.net + msde
Thank you.
I have a strange problem. I have a computed column in a replicated table, the Formula is as follows:
(isnull(hashbytes('SHA2_256',CONVERT([varchar](256),[AccrualReference],(0))),(0))) the column is also Persisted.
This gets around a case sensitivity issue and is used as the Primary Key column, which works well.The problem is that this table is then replicated to another server. On the subscriber the value of this computed field is being returned as 0x00000000 for every row, so this must be the ISNULL function doing its job. But why? The AccrualReference is the true PrimaryKey and is never NULL.
If I remove the computed specification and set the field up as varbinary(64) the value then gets replicated. This then means maintaining a different table schema for in excess of 500 tables.
Hi all!
I want to create a table. One of the columns should be in the data type MONEY with two digits on the right side of the decimal point.
How is that possible?
Thanks a lot and greetings from vienna
landau
Hi All,
I am using SQL Server 2000 Enterprise Edition fully patched. Database is in Simple Recovery mode.
I need to change a column's data type from "int(4)" to "smallint(2)". I know for sure that there will be no data (precision) lost, because I know the possible values that this column could have.
My problem is that the table I am dealing with has 600,000,000 records in it. I dropped all indexes before I tried to alter the table. But still it is taking forever and filling up my 280GB disk with transaction log file.
I know that in Oracle, if I want I can turn off logging and do these kind of modifications relatively faster.
I was wondering if there is a way of disabling logging before running this alter command.
What is the best practice to handle a situation of this sort?
I appreciate your help.
Thanks in advance,
Sinan Topuz
Hi,
I'm merge replicating a SQL Server 2005 database (publisher) to SQL Compact databases (subscribers) on mobile devices. I understood that I could add a "not null" column to a replicated table on the server as long as I specified a default value, but it seems this is not possible. I ran the following script on the server database:
ALTER TABLE Activity ADD ActivityRequiresProject bit not null default(0)
which executed OK. When I went to synchronize the db on the mobile device I got the following error:
Alter table only allows columns to be added which can contain null values. The column cannot be added to the table because it does not allow null values.
The SQL statement failed to execute. If this occurred while using merge replication, this is an internal error. If this occurred while using RDA, then the SQL statement is invalid either on the PULL statement or on the SubmitSQL statement. [ SQL statement = alter table "Activity" add "ActivityRequiresProject" bit not NULL constraint "DF__Activity__Activi__4A47DDAE" default ( ( 0 ) ) ]
Does anyone know if this is a valid error? Is is possible to add a not null column with default, and if not how do I update the schema on a replicated database?
Regards,
Greg
Can I increase the length of a varchar column of table involved in transactional replication without dropping and recreating publication/subscription?
Any help/short-cuts/undocumented features greatly appreciated.
Regards
Opal
I tried to run this(below) the table is replicated(transactional).
EXECUTE
sp_rename N'dbo.Tablename.Columnname, N'New_Columnname', 'COLUMN'But getting this error message:
Msg 15051, Level 11, State 1, Procedure sp_rename, Line 227
Cannot rename the table because it is published for replication.
I'm new to replication and am trying to determine the best approach to add a column (NOT NULL with no DEFAULT) to a replicated table. The only success I have had is if I do the following:
Delete entire Subscription
Delete entire Publication
Add column to table
Create new Publication
Create new Subscription
Run SnapShot
The problem with this approach is that each step affects the entire database and not just the modified table. I think it is inefficient to redo replication for a simple object change. What am I missing? Is there a way to only replicate the changes made to the one table without having to run a SnapShot for the entire publication?
Keep in mind the column must be defined as NOT NULL and cannot have a Default.
Thanks, Dave
I need to update a large table, about 55 million rows, without filling the transaction log, in the shortest time as possible. The goal is to alter the table and change the data type for Text column from VARCHAR(7900) to NVARCHAR(MAX).
Since I cannot do it with an ALTER TABLE statement (it would fill up the transaction log) I'm thinking to:
- rename column Text in Text_OLD
- add Text column of type NVARCHAR(MAX)
- copy values in batches from Text_OLD to Text
The table is defined like:
create table DATATEXT(
rID INTEGER NOT NULL,
sID INTEGER NOT NULL,
pID INTEGER NOT NULL,
cID INTEGER NOT NULL,
err TINYINT NOT NULL,
[Code] ....
I've thought about a stored procedure doing this but how to copy values in batch from Text_OLD to Text.
The code I would start with (doing just this part) is the following, but maybe there are more efficient ways to do it, or at least there's a better way to select @startSeq in the WHILE loop (avoiding to select a bunch of 100000 sequences and later selecting the max).
declare @startSeq timestamp
declare @lastSeq timestamp
select @lastSeq = MAX(sequence) from [DATATEXT] where [Text] is null
select @startSeq = MIN(Sequence) FROM [DATATEXT] where [Text]is null
BEGIN TRANSACTION T1
WHILE @startSeq < @lastSeq
[Code] ....
I have a scenario where I need to add a blank column to a table that is a publisher. This table contains over 100 million records. What is the best way to add the column? In the past where I had to make an update, it breaks replication because the update would take forever as jobs are continuously updating the table so replication can't catch up.
If I alter a table and add a column, would this column automatically get picked up in replication?
Hi All,
Is there a way by which we can modify the width of a column of a table which is being replicated without touching the ongoing transactional replication? This is for MSSQL2000 Transactional Replication.
I know (and successfully tried) that we can add a column to a table and that gets propaged to the replicate database and indeed the added column gets reflected there. How to add a column? sp_repaddcolumn or Right Click on the Publication-Properties and it shows a button to Add a Column.
This is what I have tried for modifying the width of a column of a table participating in Transactional Replication from varchar(10) to varchar(100)
MH (source) -> MH1 (Replicate)
The column €ścol1€? had width of varchar(10) and this was altered to varchar(100).
insert into MH..test_mh values(4,'abcdeabcdefff')
select * from MH1..test_mh
exec sp_dropsubscription @publication = N'MH', @article = N'test_mh', @subscriber = N'UKPBDRMTST2', @destination_db = N'MH1'
go
exec sp_droparticle @publication = N'MH', @article = N'test_mh'
go
alter table test_mh alter column col2 varchar(100) null OR
MH1..sp_help test_mh
exec sp_addarticle @publication = N'MH', @article = N'test_mh', @source_table = N'test_mh'
go
exec sp_addsubscription @publication = N'MH', @article = N'test_mh', @subscriber = N'UKPBDRMTST2' , @destination_db = N'MH1'
go
Needless to say, help would be apreciated -
~Mihir
How can I compare column in the same table and show only column and value that has been changed.
declare @t table (GroupID CHAR(6),Text1 VARCHAR(MAX),Text2 VARCHAR(MAX),Text3 VARCHAR(MAX))
insert into @t
SELECT '11111','Text1','Text2','Text3'
insert into @t
SELECT '11111','Text1','Text2','Text4'
END RESULTS:
Column Name Old New
Column 3 |'Text3' |'Text4'
I have a need to insert rows into an Audit type table when valueschange in certain fields in a table. I thought I could do this via atrigger. However, on requirement is to include in the audit both theold and new value.Is there a "simple" way to do this? I know I could query the tablebefore the update and compare to what the new value is and reactaccordingly.Just wondering if there is something nifty in Sql Server that I ammissing that could help me with this.Thanks in advance for your help.Bill
View 3 Replies View RelatedIs it possible to have a replicated table that you can open from and input data manually?
That is, I've got a table that I am replicating data to and I want to add some manual data to this table, every now and then.
Will this break replication?
www.beyonder422.com
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedWorking on partitioning a few large tables. One of the tables included a text column and the €śTEXTIMAGE_ON [PRIMARY]€? clause which would prevent the partitioning of this table. After some research we found that the data was legacy and no longer used. We updated the column on the affected rows to NULLS and altered the column to a VARCHAR(20)
When I attempted to run the ALTER TABLE SWITCH I encountered the error
Msg 4947, Level 16, State 1, Line 1
ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresultsjoe' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part'.
After a lot of grief and testing I determined that the message was bogus and the real issue is that the 'sys.tables' still has €ślob_data_space_id€? with a value of 1 for this table.
I created a copy of the table with the text column altered to varchar and one with just the varchar to begin with. After copying data from the original table, I tried to run the alter switch. It failed once again for the text column altered to varchar table, but it worked for the varchar from the start.
Since it appears that this value is causing my issues, is there anyway to update the table in place. I know I can BCP the data out, but that would take too long and would defeat the advantage of using the alter switch method.
BOL States:
The allow updates option is still present in the sp_configure stored procedure, although its functionality is unavailable in Microsoft SQL Server 2005 (the setting has no effect). In SQL Server 2005, direct updates to the system tables are not supported. This means we cannot update the table manually.
Thanks
Hi..
I got 10 Tables with data in it for 100 Loans. The data can be Good and Bad .....
I had a Update Proc which Updates the 10 tables with the Good data what ever i pass...for this 100 Loans
Tha Proc will update the existing data in all tables whether it is Good or Bad Data.
when the updating is completed I want to know what are the Loans that were updated where there is a Bad Data in atleast one Field of the 10tables.
I don't want to check field by field in each table.... if there is a bad data and my proc updated with a Good Data i want to know that Loan.
Can any one has an idea on this,,,,
Thanks
Bob
Is there a Tool/Utility/StoredProcedure/Query/View that can tell me the last time the data in a particular table was changed?
That change can be the result of either an ADD , INSERT, or DELETE statement.
I am using SQL Server 2005.
I am attempting to create a stored procedure that will launch at report runtime to summarize data in a table into a table that will reflect period data using an array type field. I know how to execute one line but I am not sure how to run the script so that it not only summarizes the data below but also creates and drops the table.
Any help would be greatly appreciated.
Current Table
Project | Task | Category | Fiscal Year | Fiscal Month | Total Hours
---------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 2007 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2007 | 02 | 20
Proj 1 | Task 1 | Cat 3 | 2007 | 03 | 35
Proj 1 | Task 1 | Cat 1 | 2008 | 01 | 40
Proj 1 | Task 1 | Cat 2 | 2008 | 02 | 40
Proj 1 | Task 1 | Cat 3 | 2008 | 03 | 40
Proposed Table
Project | Task | Category | Fiscal Month 01 | Fiscal Month 02 | Fiscal Month 03 | Fiscal Year
---------------------------------------------------------------------------------------------------------------------------------------------------
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2007
Proj 1 | Task 1 | Cat 2 | 0 | 20 | 0 | 2007Proj 1 | Task 1 | Cat 3 | 0 | 0 | 35 | 2007
Proj 1 | Task 1 | Cat 1 | 40 | 0 | 0 | 2008
Proj 1 | Task 1 | Cat 2 | 0 | 40 | 0 | 2008
Proj 1 | Task 1 | Cat 3 | 0 | 0 | 40 | 2008
Thanks,
Mike Misera
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
Hi,
My scenario:
I have a master securities table which has 7 fields. As a part of the daily process I am uploading flat files into database tables. The flat files contains the master(static) security data as well as the analytics(transaction) data. I need to
1) separate the master (static) data from the flat files,
2) check whether that data is present in the master table, if not then insert that data into the master table
3) If data present then move that existing record to an history table and then update the main master table.
All the 7 fields need to be checked to uniquely identify a single record in the master table.
How can this be done? Whether we can us a combination of data flow items or write a sql procedure to do all this.
Thanks in advance for your help.
Regards,
$wapnil
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedHello, I would like to get the columns in a table, this works fine:SELECT syscolumns.* FROM sysobjects INNER JOIN syscolumns ON sysobjects.id = syscolumns.id WHERE sysobjects.name = 'Customers'ORDER BY syscolumns.colidHowever, is there a way to get Column_Data_Type as for example "nchar" or "varchar" instead of having it as numbers.Can anybody help ?thanks
View 7 Replies View RelatedThis is an easy one , I need to know the way to check programatically for an SQL server 2000 column data type , if the result is a code , which codes are for the diferent datatypes ( varchar , text , smallint , etc ) , if you send me an url is ok.
thank you
Hi,
I'm trying to figure out the best way to determine the data_type of a column, given the table name and column name. Once I've determined it's a charactor string I can get the length using COL_LENGTH, but I can't fund a command or procedure that will return the data type.
Thank you.
can anyone help me figure out why when i run the following storedprocedure i get the error:(1460 row(s) affected)Msg 245, Level 16, State 1, Procedure SP_SALESTRENDS, Line 40Conversion failed when converting the varchar value 'X' to data typeint.SP:--STORED PROCEDURE FOR INVOICE TRENDS:--To use Stored Procedure use the following code:--EXEC SP_INSPECTIONSUMRY (MONTH), (OFFICE)--(OFFICE) CAN BE: BGR FOR BANGOR, SP FOR SOUTH PORTLAND, NH FOR NEWHAMPSHIRE, UNH FOR UNH--(REPORT) CAN BE: PRODUCT CODE FOR REPORT BROKEN OUT BY PRODUCT CODE-- EXEC SP_SALESTRENDS BGR, INVOICED, 2006, XALTER PROCEDURE SP_SALESTRENDS@OFFICE VARCHAR(30),@REPORT VARCHAR(30),@VARYEAR INT,@CODE VARCHAR(30)ASIF @REPORT='INVOICED'SELECT YEAR(I.INVOICEDAT) AS VARYEAR, MONTH(I.INVOICEDAT) AS VARMONTH,SUM(I.STOTAL) AMOUNT, P.PERSON, P.PRODUCT, C.DESCRIPTNINTO #TEMP_SALESTRENDSFROM OPENQUERY(PROJECTS, 'SELECT PROJECT, INVOICEDAT, STOTALFROM INVSUMYR') ILEFT JOIN(SELECT *FROM OPENQUERY(PROJECTS, 'SELECT NUMBER, PRODUCT, PERSONFROM PROJMAST')) PON (LTRIM(I.PROJECT)=LTRIM(P.NUMBER))LEFT JOIN(SELECT PC, DESCRIPTNFROM OPENQUERY(PROJECTS, 'SELECT PC, DESCRIPTNFROM PRODCODE')) CON (C.PC=P.PRODUCT)GROUP BY YEAR(I.INVOICEDAT), MONTH(I.INVOICEDAT), P.PERSON, P.PRODUCT,C.DESCRIPTNORDER BY VARYEAR, VARMONTH-- INVOICED REPORT BROKEN OUT BY OFFICEIF @REPORT='INVOICED' AND @CODE=1 AND @VARYEAR=1234 AND@OFFICE='NORRIS'SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @CODE!=1 AND @VARYEAR=1234SELECT VARYEAR, VARMONTH, SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT=@CODEGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED'AND @CODE!=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT=@CODE AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='NORRIS' AND @CODE=1 AND@VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='BGR' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('G', 'H', 'I', 'J', 'K', 'L')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='BGR' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('G', 'H', 'I', 'J', 'K', 'L') AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='SP' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('A', 'B', 'C', 'D', 'E', 'C', 'S', '3', '4')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='SP' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('A', 'B', 'C', 'D', 'E', 'C', 'S', '3', '4') ANDVARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='NH' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('W', 'X', 'Y', 'N', 'O', 'P')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='NH' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('W', 'X', 'Y', 'N', 'O', 'P') AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='UNH' AND @CODE=1 AND @VARYEAR=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('U', 'Z', 'R', 'V')GROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTHIF @REPORT='INVOICED' AND @OFFICE='UNH' AND @CODE=1 AND @VARYEAR!=1234SELECT VARYEAR , VARMONTH , SUM(AMOUNT) AS AMOUNTFROM #TEMP_SALESTRENDSWHERE PRODUCT IN ('U', 'Z', 'R', 'V') AND VARYEAR=@VARYEARGROUP BY VARYEAR, VARMONTHORDER BY VARYEAR, VARMONTH--END OF SALES TRENDS STORED PROCEDUREthanks.
View 4 Replies View RelatedHow do I programatically change a column (say username) in a table (say tblusers) from varchar(25) to varchar(100)I am looking for something likealter tblusers set username as varchar(100) I know the above statement in nonsensical but it conveys the idea.
View 3 Replies View RelatedHELLO
i have an sql server database, with a table an some columns.
how can i get the data type of each column and the lengh define in the database table?
I want to change a column's data type from bit to int. There are data in the table already. I'm wondering if it is save/correct way to issue the following command to change the data type for that column.ALTER TABLE database_tableALTER COLUMN my_bit_column INT; Thanks.
View 1 Replies View Related