Can After Insert Trg Start A VB Event?
Jun 5, 2008I have had some class room training but not sure if this can be accomplished via CLR trigger, User defined function or similar. Can any point me to article/posting or offer up suggestions.
Tom
ADVERTISEMENT
SQLServer And SQL Browser Fails To Start With An Event ID 7000
May 14, 2006I just finished installing SQL Server 2005 Express including the Toolkit.
During installtaion I selected instance name as SQLExpress.
I cannot start SQLServer nor SQL Browser services and reports Event ID 7000 with a message Path not found.
Although, the entire installation ran error free. I am running Winodws XP Professional w/SP2 and up-to date patches. Please help!
yaj
SQLISPackage Start/finish Events In Windows Event Logs
Mar 1, 2007I was wondering if anyone knew of a way to disable the following, SQLISPackage start/finish events sent to windows event logs everytime a SSIS package is executed and completed.
Regards
Ryan Dickson
A Trigger That Fire Every Insert Event?
May 21, 2004This trigger fired once ONLY during an insert event. My web form inserted 4 news records so it should fire the trigger 4 times correct?
CREATE TRIGGER trInsertImplementationTaskP1
on dbo.ImplementationTasks
FOR INSERT
AS
DECLARE @ITIDint
SELECT @ITID = (SELECT ITid
from inserted)
EXEC TrigSendNewIMAlertP1 @ITID
Raiserror With Log Insert An Event ID:9724
Jun 20, 2007Hello,
I have seen that when I call raiserror with log from the SPs activated by SB (severity lower that 10) I have always inside the SQL Server Log an entry with Event ID:9724 and then another entry with a different Event ID but roughtly the same message.
I would like to know more about this Event ID:9724 but I'm not to find information.
Somebody can explain me that or adress me some useful link?
Thankx for any help.
Marina B.
2nd INSERT INTO Statement In A Button Click Event
Mar 6, 2006Hi everyone.I am trying to write 2 INSERT INTO statements into a Button click event. Both statements go to the same database but differnet tables. The first statement works fine but the 2nd causes an error with the Try, Catch, Finally statement. When I remove the ExecuteNonQuery from the 2nd statement, the 2nd INSERT INTO statement fails to work. Any help would be brilliant. Thanks!
Private Sub btnInsertChange_Click(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Handles btnInsertChange.Command
'Insert Guide changes into ChangesReport table in sql server Me.SqlCommandThemeTest.Connection = Me.SqlConnection1
Dim Name As String Dim values As String Dim sSQL As String Name = "Theme, Guide, GuidePage, PageType, ChangeCategory, ChangeFrom, ChangeFromText, ChangeTo, ChangeToText ContentManager" values = "lstTheme, lstGuideName, lstGuidePage, lstPageType, lstChangeCategory, lstChangeFrom, txtChangeFrom, lstChangeTo, txtChangeTo, Label1" SqlCommandThemeTest.CommandText = "INSERT INTO dbo.ChangesReport (Theme, Guide, GuidePage, PageType, ChangeCategory, ChangeFrom, ChangeFromText, ChangeTo, ChangeToText, ContentManager) VALUES (@themeValue, @guideValue, @guidepageValue, @pagetypeValue, @changecategoryValue, @changefromValue, @changefromtextValue, @changetoValue, @changetotextValue, @contentmanagerValue)"
SqlCommandThemeTest.Parameters.Add("@themeValue", lstTheme.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@guideValue", lstGuideName.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@guidepageValue", lstGuidePage.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@pagetypeValue", lstPageType.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@changecategoryValue", lstChangeCategory.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@changefromValue", lstChangeFrom.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@changefromtextValue", txtChangeFrom.Text) SqlCommandThemeTest.Parameters.Add("@changetoValue", lstChangeTo.SelectedItem.Text) SqlCommandThemeTest.Parameters.Add("@changetotextValue", txtChangeTo.Text) SqlCommandThemeTest.Parameters.Add("@contentmanagerValue", Label1.Text)
Try Me.SqlConnection1.Open() Me.SqlCommandThemeTest.ExecuteNonQuery() Catch ex As Exception Response.Write(ex.ToString) Finally Me.SqlConnection1.Close() End Try
'Insert textbox to ChangeLogFrom ddl Me.CmdDDLFromUpdate.Connection = Me.SqlConnection1
Name = "ChangeFromText" values = "txtChangeFrom" sSQL = "INSERT INTO dbo.Change Log From (ChangeLogFrom) VALUES (@changelogfromValue)" Me.CmdDDLFromUpdate.Parameters.Add("@changelogfromValue", txtChangeFrom.Text)
Try Me.SqlConnection1.Open() Me.CmdDDLFromUpdate.ExecuteNonQuery() Catch ex As Exception Response.Write(ex.ToString) Finally Me.SqlConnection1.Close() End Try
How To Set Start Identity Column During An Insert
May 2, 2008Hi.
I am doing a left join insert from two tables, and i know my ID is the Indentity column. I am doing something wrong and it has to do with the identity issue. I have set the identity to on, b/c i currently have data in the table (tblProduct) and I am inserting all the records not in that field from a table named Complete_Products. Can someone please examine this query and tell me what I am doing wrong? I think I need to set a start value for the identity but not totally confident on how to do that.
Thanks. Below is my query with error.
Set Identity_Insert tblProduct on
INSERT INTO tblProduct
(productCode, productName, productNavID, CanBeMounted, productRetailPrice, productHeight, productWidth, Rank, CanBeFramed, ProductType)
SELECT Complete_products.APNum, Complete_products.Title, Complete_products.CategoryID, Complete_products.Mountable, Complete_products.price,
Complete_products.Height, Complete_products.Width, Complete_products.IRank, Complete_products.frameable, Complete_products.Typ
FROM Complete_products LEFT OUTER JOIN
tblProduct AS tblProduct_1 ON Complete_products.APNum = tblProduct_1.productCode
where tblProduct_1.productCode IS NULL
Msg 545, Level 16, State 1, Line 2
Explicit value must be specified for identity column in table 'tblProduct' either when IDENTITY_INSERT is set to ON or when a replication user is inserting into a NOT FOR REPLICATION identity column.
Recovery :: Configure Extended Event To Trigger A Mail Whenever Any Event Occurs
Jun 2, 2015Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
DB Engine :: Event Tracing For Windows Failed To Send Event
Oct 25, 2011My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date 10/25/2011 10:55:46 AM
Log SQL Server (Current - 10/25/2011 10:55:00 AM)
Source spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
WMI Event Watcher Task Continual Firing Event When Not Triggered
Apr 8, 2008I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
Help - Security Event Log Posts Error Event ID 560 Every Few Seconds
May 31, 2007Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
Query Or Script To Get The Event Viewer Event Properties?
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
Inserting Multiple Records Using A @start And @count With One INSERT (and No Loop)
Aug 22, 2007Is there a way to insert multiple records into a database table when you're just given "count" of the number of rows you want? I want to do this in ONE insert statment, so I don't want a solution that loops round doing 100 inserts - that would be too inefficient.
For example, suppose I want to create 100 card records starting it card number '1234000012340000'. Something like this ...
declare @card_start dec(16)
set @card_start = '1234000012340000'
declare @card_count int
set @card_count = 100
drop table card_table
create table card_table (
card_number dec(16),
activated char default 'N'
)
insert into card_table
select
... ???? ....
But WITHOUT using a while-loop (or any other kind of loop). I'm looking for fast and efficient code! Thanks.
EVENT ID 18456 STATE: 16 Login Failed For User 'DOMAIN/user'. [CLIENT: &&<local Machine&&>] Every Minute In Event Log.
Oct 22, 2007We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
It Takes A Long Time To Insert The First Record Each Time When The Program Start
Dec 15, 2006I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
SSIS - Data Flow To Flat File - Insert At Start Of File
Oct 24, 2007Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
Help Me -CURSOR Backward Insert From End Date &&> To Start Date
Jan 14, 2008need help
help me -CURSOR backward insert from End Date > to Start Date
how to insert dates from end to start
like this
SELECT 111111,1,CONVERT(DATETIME, '17/03/2008', 103), CONVERT(DATETIME, '01/03/2008'
i explain i have stord prosege that create mod cycle shift pattern
and it working ok
now i need to overturned the insert so the first insert is the '17/03/2008' to '16/03/2008' ..15...14..13..12...2...1
so the first insert be '17/03/2008' next '16/03/2008' ...........................01/03/2008
tnx
Code Block
DECLARE
@shifts_pattern TABLE ([PatternId] [int] IDENTITY(1,1 ) NOT NULL, [patternShiftValue] [int]NOT NULL)
declare
@I int
set
@i=0
while
@i < 5
BEGIN
INSERT INTO @shifts_pattern ([patternShiftValue] )
SELECT 1 UNION ALL
SELECT 2 UNION ALL
SELECT 3 UNION ALL
SELECT 4 UNION ALL
SELECT 5 UNION ALL
SELECT 6 UNION ALL
SELECT 7 UNION ALL
SELECT 8
set
@i=@i+1
end
declare
@empList
TABLE
( [empID] [numeric](18, 0) NOT NULL,[ShiftType] [int]NULL,[StartDate][datetime]NOT NULL,[EndDate] [datetime] NOT NULL)
INSERT INTO
@empList ([empID], [ShiftType],[StartDate],[EndDate])
SELECT 111111,1,CONVERT(DATETIME, '01/01/2008', 103), CONVERT(DATETIME, '17/01/2008', 103)
-- create shifts table
declare
@empShifts
TABLE ( [empID] [numeric](18, 0) NOT NULL,[ShiftDate] [datetime]NOT NULL,[ShiftType] [int]NULL ,[StartDate] [datetime]NOT NULL,[EndDate] [datetime]NOT NULL)
DECLARE
@StartDate datetime
DECLARE
@EndDate datetime
Declare
@current datetime
DEclare
@last_shift_id int
Declare
@input_empID int
----------------- open list table for emp with curser
DECLARE
List_of_emp CURSOR FOR
SELECT
emp.empId,emp.ShiftType,emp.StartDate,emp.EndDate FROM @empList emp
OPEN
List_of_emp
FETCH
List_of_emp INTO @input_empID , @last_shift_id ,@StartDate,@EndDate
SET @current = @StartDate
-----------------
-- loop on all emp in the list
while
@@Fetch_Status = 0
begin
-- loop to insert info of emp shifts
while
@current<=@EndDate
begin
INSERT INTO @empShifts ([empID],[ShiftDate],[ShiftType],[StartDate] ,[EndDate])
select @input_empID ,@current,shift .patternShiftValue ,@StartDate,@EndDate
from @shifts_pattern as shift where PatternId=@last_shift_id+1
-- if it is Friday and we are on one of the first shift we don't move to next shift type .
if (DATENAME(dw ,@current) = 'Friday' ) and
EXISTS(select ShiftType from @empShifts where ShiftDate=@current and empID= @input_empID and ShiftType in ( 1,2,3))
-- do nothing
--set @last_shift_id=@last_shift_id
print ('friday first shift')
ELSE
set @last_shift_id=@last_shift_id+ 1
set @current=DATEADD( d,1, @current)
end
FETCH
List_of_emp INTO @input_empID ,@last_shift_id,@StartDate,@EndDate
-- init of start date for the next emp
set
@current = @StartDate
end
CLOSE
List_of_emp
DEALLOCATE
List_of_emp
select
empID,shiftDate,DATENAME (dw,shift.ShiftDate ), shiftType from @empShifts as shift
RETURN
IS Same? (RS Start In Window Severvices V RS Start In Configration)
Mar 30, 2007
1) RS Start in Window Severvices
2) RS Start in Configration
1) and 2) Is Same?
I think that It looks like same Operation.
Event Log
Oct 9, 2001Hello,
Following are the two events frequently observed in the system event error log
has any body come across these errors
1.The description for Event ID ( 318 ) in Source ( SQLServerAgent$XYZ ) could not be found. It contains the following insertion string(s):
2.he Open Procedure for service "MSSQLServer" in DLL "SQLCTR70.DLL" failed. Performance data for this service will not be available. Status code returned is DWORD 0.
Any soultions for the above
Nilesh
Event 998
Sep 16, 2002I get the following message in the eventlog and I can't find any information about it.
SQL 7 sp3
Can anyone help?
Event ID: 998
Source: SQLServerProfiler
Type: Error
Category: Internal Error
Executable: I:MSSQL7innsqlservr.exe
Description: Error performing inpage operation.
Source: ........srcwritelog.c
Line: 811
Event ID:333
Nov 6, 2007HOW TO RESOLVE IT?
View 1 Replies View RelatedEvent ID: 421
Jun 28, 2007I get this error in My Event Log on My WSUS server. I am running a Windows 2000 with SQL 2K SP4.
Connection to database failed. Reason=Cannot open database requested in login 'SUSDB'. Login fails. Login failed for user 'WSUSASPNET'.. Connection string: Data Source=WSUS;Initial Catalog=SUSDB;Connection Timeout=60;Application Name=WSUS SQL Connection; Trustedd_Connection=Yes;Pooling='true'; Max Pool Size = 100
Event ID 107
Apr 30, 2008I have been observing repeat error logs in the Event Viewer (Appln Logs) for event ID 107
Event Type: Error
Event Source: Report Server Windows Service (MSSQLSERVER)
Event Category: Management
Event ID: 107
Date: 4/14/2008
Time: 3:22:28 AM
User: N/A
Description: Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
And also found an information in the error log saying that SQL Server Service started successfully immediately after this error occurred.
Is there any known root cause which makes the service restrat often ? How much is this impacting ?
Are there any methods to resolve this ?
I would be happy to get some more information on this.
Thanks.
Time Event
Oct 6, 2006i heard somewhere that there is a time a "time event wizard" or something like that in SQL. and i like to know were can i find it. any link or answer will be really appreciated thanks.
View 5 Replies View RelatedNeed Some Help On SELECTING Event
Apr 21, 2008hello all,
i have a nested gridview. how do i add a SELECTING event for this datasource for my inner gridview? because i need to increase the commandtimeout. thnx.
private SqlDataSource ChildDataSource(string strCustno) { string strQRY = "Select ..."; SqlDataSource dsTemp = new SqlDataSource(); dsTemp.ConnectionString = ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString ; dsTemp.SelectCommand = strQRY; return dsTemp; }
OnRowDeleting Event ?
May 30, 2008i need some clarification here,i changed the CommandField for 'Delete" to the template field like this and its working well with the extender .<asp:TemplateField>
<ItemTemplate><asp:LinkButton ID="lnkDelete" runat=server Text="Delete" OnCommand=onCommand_deleter CommandArgument="Deleting" CommandName="Delete" ></asp:LinkButton>
<ajax:ConfirmButtonExtender ID="cnfDelete" TargetControlID="lnkDelete" runat=server ConfirmText="Are you sure you want to delete this ?" ></ajax:ConfirmButtonExtender>
</ItemTemplate>
</asp:TemplateField>
I am confused b/c
Earlier,i was handling the delete of a gridview row under OnRowDeleting event.Now its being handled by "onCommand_deletePlayer".Then why do I still need to handle onRowDeleting event?It gave me error,when i tried to avoid it.What exactly i shud code in OnRowDeleting. I am checking something like this rightnow in onRowDeleting,but this doesn't cancel the deletion despite of raising the messageif (gridView.Rows.Count <= 1)
{e.Cancel = true; lblMessage.Text = "You must keep at least one record // e.cancel doe NOT work,rows gets deleted despite the message,if delete link is clicked..}
Is there a way to stop the user from deleting the LAST and ONLY row from db for a given condition?thanks
Event Viewer
Feb 1, 2002I tried to save an event viewer file as a .txt format file and when I open the saved file, it's not readable.
Can someone have an idea of what format should I save the event viewer file so I will be able to view it's contents?
Thanks in advance!!
Job Failed With Event 208
May 2, 2000We are trying to schedule a DTS package. If we run the package when the server is logged in the job works. If we logoff the server the job fails.
We looked in the NT Event log and we get a message from the SQLServerAgent that the job failed with Event 208. If we check the job Run History in the Next Run we get message 'Date and Time is not Available'. I should mention that the DTS pachage contains some mapping to drives on the server.
Any ideas? We have been struggling with this for a long time. Thanks.
Event Error?
Dec 30, 2002Why would I get an application event viewer error when I truncate the transaction logs on my databases? All the error tells me is that i truncated the database log.
Thanks
File Event
Jul 4, 2003Hi,
Can anyone help me with this?
I need to run an SQL job if a specific file exists. Actually, that specific files gets created different time in different day. I need to run the job when the file arrives. Is there any way to do this in SQL? I have done this in seagate scheduler but I need to do it in SQL.
Please help!!!!!!!
Thanks.
Choosing Event To Log
Feb 21, 2006Hi,
log backup done every 5 min.
so sql server log file full of entries
"Log backed up: Database: Prices, creation date(time):...."
could loging for Log backed for db Prices be disabled ?
Thanks
Alex
Event Capture
Jul 27, 1998Hi,
We would like to capture events in our system. There seem to be
three obvious capture points for us - application, triggers, transaction
log. The latter seems to be the most attractive, since we`re looking
for a solution with minimal performance impact. In general, our
problem is similar to populating data warehouses from on-line databases.
Can anyone proffer some advice? In particular, being quite new to
SQL Server, I am not sure how difficult/possible it is to read the
transaction log in order to cull events. Some direction here would
be greatly appreciated.
Thanks,
Karl
Truncate Log Vs. NT Event Log
May 5, 1999I want to experiment with setting the Truncate Log on Checkpoint option to True to see if this will lessen the chance of my transaction log running out of space. Before I do this I want to be sure that the Transaction Log is not tied to the NT Event Log, SQL Error Log, etc. For example, does the NT Event Log (or any other log) use the Transaction Log? Thanks, Kevin.
View 2 Replies View Related