Can I Achieve These Things Using Reporting Services?
Apr 17, 2008
I have a main report and some subreports.
What i want to achieve is the subreports would be dynamically sent parameters to and the layout would change depending on some
parameters sent from the main report.
So there ia going to be a main report that is constant but the subreports data and layout could change.
Another question is can i have an expression that would hide a subreport if there is no data in the subreport?
I've got a report that has 3 multiselect parameter selection dropdowns in my report.
Dropdown 3 is depending on the selected values of dropdown 2. Dropdown 2 is depending on the selected values of dropdown 1.
For example:
In dropdown 1 the values A1 and A2 are available
when I select a value A 1 in dropdown 1 values A1_B1 and A1_B2 are available in dropdown 2
when I select A1 and A2 in dropdown1 values A1_B1, A1_B2, A2_B1 and A2_B2 are available in dropdown 2
when i select A1_B1 in dropdown 2 values A1_B1_C1,A1_B1_C2 are available in dropdown 3 when i select A1_B1 AND A1_B2 IN dropdown2 values A1_B1_C1,A1_B1_C2, A1_B2_C1,A1_B2_C2 are available in dropdown 3
in the "picture" above I describe the selection i make in the report
so in dropdown 1 I select A1 in dropdown 2 I select A1_B1,A1_B2 in dropdown 3 I select A1_B1_C1,A1_B1_C2,A1_B2_C1, A1_B2_C2
then the strang happens.
When I look in profiler to see what happens, is that for dropdown 2 the second value for the parameter of dropdown 2 is and for dropdown 3 all except the first one is missing.
The values from the dropdownboxes are passed through to a subreport. When the selected values from dropdown boxes are passed though directly to the datasets this problem doesn't occur.
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Is it possible to dervive the result in a single query? Or separate query needed like the followings :
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, MIN(WT) AS MinWT, MAX(WT) AS MaxWT, AVG(WT) AS AvgWT, COUNT(RecID) AS TotalQ FROM TAB_Name GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, COUNT(Qid) AS 'WT<=0' FROM TAB_Name WHERE WT <= 0 GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, COUNT(Qid) AS 'WT<=10' FROM TAB_Name WHERE (WT > 0 AND WT <= 10) GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
Often when I write a stored procedure, I encounter a situation where it will be really convenient if I can ignore an error and continue the execution of next SQL statement, especially when I know what kind of error it will generate. It's just like the effect of "On Error Resume Next" in VB.
Does anyone have any idea or have some knowledge to share? I would really appreciate.
I am using SQL Server 2005 and SQL Server 2000. Thanks.
Is it possible to achieve partition parallelism in SSIS? What I am asking is, In DataStage, if I load some data like 'data reader -> trans1 -> trans2 -> destination' (and assume that I have 4 nodes configured), the tool divides the data into 4 different datasets and executes the package as 4 instances. This way the data load is very fast. Is it possible in SSIS?
Of course we can divide the dataset and load them thru multiple instances? But then dividing the dataset will differ for every load and so we need to modify the package all the time. Even if we divide the dataset, I am not sure 4 instances will run in 4 different nodes or in a same node? So anybody has any idea about it?
I have a flat file source which going to write in a db table. There is lot of warning message, which based on different condition (CSPL) generate different message, which I achieved through lots of conditional split and derived columns dataflow object. My question is can I achieved same functionality by the script task?
I am looking into various options to improve latency of our application (we figured the latency is mainly because data persistence - writes and reads from DB). I am looking into In-Memory databases also. But, before making that decision (of using in memory databases), I would like to see if there is a way to configure SQL Server 2005 to get as close performance as in-memory databases?
My question: 1. Is there a way that I can configure SQL Server 2005 to use a CACHE that gets loaded as needed basis, so that future database reads/writes will happen to the cache as opposed to disk (db writes)? 2. Is SQL Server 2005 recoverable in such configurations? 3. Are there any ideas/resources where I can get more details? (Such as sample configurations with bench mark numbers, rpevious experiences..etc)
I am developing a package using SSIS which needs to do the following.
1. Read all flat file from a folder. I am doing this using For Loop task. I know the total number of files in that folder hence I am setting the loop counter = file count.
2. The next step is to import the data from flat file to SQL server destination table using data flow task.
3. Upon successful completion of data flow task there are some other tasks like SQL to do some checks/validation on the data, export it to another tables.
Upon successful completion of step 3 the iteration goes to next file.
I want to achieve the following
IF step 2 has error (for example corrupt file or incomplete data), I want to fail data transfer completely, skip step 3, and go to step 1 for next available file and do rest.
We have two locations in US, I am thinking of having 2 node SQL cluster for Lync 2010, I alardy have One DB server running in one location, now we got new site where we are planning to have one more DB for redundancy.
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
Hi, can I assign a NAS(Network Attached Storage) server to store the database file(readable and writable) and assign other several MS SQL database servers which will use the same database file in NAS to achieve the objective of high availability?
If it can, how can I set it up in MS SQL Server or it requires another 3rd patry software to set it up?
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value. 1. In sql we have a like key word to query . for example select * from product where product like "AA%". what is equavalent mdx query to get such results ? 2.How to impliment the multivalue parameters without using dropdown box?
I am facing sever Refresh issue in PPS Reports. I have Two Dashboard
Dashboard_One and Dashboard_Two
I have few Filters on both the Dashboard .
In Dashboard_One I have 2 Filters
1)Year filter where Year 2012 is my Default value 2)City Filter where "CityOne" is Default Filter Value
If I select Year"2010" in Period Filter and "CityTwo" In City Filter.I see Related reports . Now I navigate to Dashboard_Two to See Other Reports where I have few Other Filter Like "Country" where I select "CountryThree" . When I navigate Back to Dashboard_one I do not see Dashboard with Default value given to them
I still see Filter value Year=2010 and CountryFilter="CountryTwo" in Dashboard Dashboard_One .. where as I should have seen it based on the Default value given to the Filter.. How should I resolve this refresh issue which I am facing in PPS Dashboard. I do not see Default value in the Filter ,It always give the filter value which was selected later when Navigated back.
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
