Can Not Access Excel File Using OpenRowset

Aug 8, 2007



I am using SQLServer 2005 SP2. I enabled the Ad Hoc Distributed Queries and DisallowAdhocAccess registry option is explicitly set to 0. Query is working fine when I remote desk to the server and execute when I run same query from my workstation I am getting following error


Msg 7399, Level 16, State 1, Line 1

The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" reported an error. The provider did not give any information about the error.

Msg 7303, Level 16, State 1, Line 1

Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".


Any help is appreciated.
Thanks
--
Farhan

View 8 Replies


ADVERTISEMENT

T-SQL (SS2K8) :: Access EXCEL Using OPENROWSET

May 22, 2014

I'm trying to access Excel file from SQL Server management studio using OPENROWSET using the below query but getting the error listed below.

Query:
SELECT *
FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'Excel 12.0 Xml;HDR=YES;Database=E:TestFilesExcelFile.xlsx',
'SELECT * FROM [Sheet1$]'
)

Error:
Msg 7415, Level 16, State 1, Line 2
Ad hoc access to OLE DB provider 'Microsoft.ACE.OLEDB.12.0' has been denied. You must access this provider through a linked server.

View 9 Replies View Related

How To Query An Excel File By Using Openrowset

Mar 1, 2007

Hi everyone,

I'm trying to query an excel file and I get a mistake. The query is as follows:

SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=C:ExcelFile.xls', 'select * from Sheet1')

and I get the following error message:

Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.
[OLE/DB provider returned message: The Microsoft Jet database engine could not find the object 'Book1'. Make sure the object exists and that you spell its name and the path name correctly.]
OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IColumnsInfo::GetColumnsInfo returned 0x80004005: ].

I'm thanking any help that you can give.

Thanks,

Oscar.

View 7 Replies View Related

OPENROWSET ( CAN WE CREATE FILE WITHOUT EXCEL TEMPLATE??)

Mar 20, 2008

insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=D: esting.xls;', 'SELECT * FROM [SheetName$]') select * from pubs.dbo.authors
 
I am using similiar query to above to create a excel file, however for this to work, I need to create a template file which has the same columns as the authors table. Is there a way to NOT to define template columns , as I some times will not know which columns will be available... as teh query is dynamic....

View 4 Replies View Related

Import Excel-File (OPENROWSET) On X64 SQL Server

Jan 7, 2008

Hi, recently I encountered the following problem:
I tried to execute a stored procedure on the newly installed SQL 2005 Server (now on x64 Win Server 2003) which imports an Excel-File into a DB table.
We use OPENROWSET to access the Excel data. But I recognized this is dependent on Jet OLE DB which seems is not available for x64 windows.

Is there another way to import excel data using a stored procedure.

thank you in advance, rene

View 12 Replies View Related

SQL 2012 :: OPENROWSET To Read In Data From Excel 2010 File (XLSX)

Jun 12, 2015

I have a test server (TEST1) running SQL 2012 and Windows 2012R2. One of the developers wants to use OPENROWSET to read in data from an Excel 2010 file (an xlsx file).

I have loaded the Microsoft Drivers in "AccessDatabaseEngine_64.exe" and enabled the Ad Hoc Distributed Queries option in SQL.

This is the sample code we are working with:

SELECT
X.MEMBID
FROM OPENROWSET(
'MSDASQL',
'Driver={Microsoft Excel Driver (*.xls, *.xlsx, *.xlsm, *.xlsb)};DBQ=etworkserverFolder1Folder2MEMBIDs.xlsx',
'SELECT * FROM [Sheet1$]'
) AS X

I can run the sample query from my laptop with SSMS (I have admin rights) and I can also run it as SA from my laptop. So all is good, right?

But if I RDC into TEST1, I cannot run the query. I get this error:

OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver] Your network access was interrupted. To continue, close the database, and then open it again.".
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver]General error Unable to open registry key Temporary (volatile) Ace DSN for process 0x574 Thread 0xb74 DBC 0x1d07f08 Excel'.".
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Excel Driver]General error Unable to open registry key Temporary (volatile) Ace DSN for process 0x574 Thread 0xb74 DBC 0x1d07f08 Excel'.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".But wait! It gets better.

I can run the query as SA from TEST1.

And of course, the developer can't run it either.

And it works fine in the production server.

I'm thinking the basics are there but something isn't right in some permission somewhere.

View 9 Replies View Related

Any Idea Why OpenRowSet To Open Excel File Doesn't Work Well In SQL 2005?

Mar 3, 2007

Maybe it worked once, but in most time it doesn't work, query like below

select top 10 *
from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webablefilessitefiles4000010
eibcactive.xls',
'select * from [crap2$]')


I got error

OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)" returned message "Unspecified error".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)".


but the same query can run without any problem on a SQL 2000 server run on a server in the same network.

Any idea?

View 12 Replies View Related

OPENROWSET And EXCEL

Nov 7, 2006

I having an excel file called TEST.XLS (in c: drive) which has 3 columns (c0,c1,c2) & 8 rows
c0 c1 c2
1 a A
2 b B
3 c C
4 d D
5 e E
6 f F
7 g G
8 h H

In sql server i have one table called TEST which has three columns
c0 char(10)
c1 char(10)
c2 char(10)


when i runnig the following query

select *
into TEST from openrowset('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=C:TEST.xls;HDR=YES',
'select * from [Sheet1$]')



i am getting error like this

Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error.
[OLE/DB provider returned message: The Microsoft Jet database engine could not find the object 'Sheet1$'. Make sure the object exists and that you spell its name and the path name correctly.]
OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IColumnsInfo::GetColumnsInfo returned 0x80004005: ].

Version : Sql server 2000 & Excel 2002

Anybody having any idea why this error occuring?
thanks in advance...
Philkos

View 2 Replies View Related

OPENROWSET To Excel

Jan 14, 2007

Hi Anyone I am new member and happy to be here.

I am having trouble exporting the correct data from sql server to an excel spreadsheet using 'OPENROWSET'

The problem is that although the data from my sql table is say :
'a',1,2,3 , the excel spreadsheet sees the data as :
'a','1,'2,'3 ..1,2,3 are of course numbers NOT text, its just that the driver has put a single appostraphy before the number !

I know there is a bug with the ISAM driver but has anyone managed to solve this or has anyone have any alternatives ?

best regards

Reza

R Khan

View 3 Replies View Related

Openrowset And Excel

Apr 17, 2007

I'm doing an openrowset query on an excel sheet. (Using SQL Server 2005) Everything works great, except that I have one column that has both numeric and text data in the spreadsheet. The query returns that column as datatype varchar but puts nulls in the rows that have numeric data in the spreadsheet.

Any suggestions?

I run:

select *
from openrowset('microsoft.jet.oledb.4.0',
'Excel 8.0;database=[filepathandname],
'select * from [Sheet1$A4:G5000]')

on spreadsheet data that looks like:

Model_id Model_name
. . .
123 t4556
124 x225
125 455
. . .

and get something like . . . .

Model_id Model_name
. . .
123 t4556
124 x225
125 NULL
. . .

View 1 Replies View Related

Distant Access To Excel File For Import

Aug 3, 2007

Hi,
I'm developping a web application and I need to import a data from an excel file to sql server 2005.
It works very well locally (visual studio & sql server & the excel file on the same machine).
But it doesn't work when visual studio & excel file are in a machine and sql server is in another server.
I have always the same problem:
'C:Documents and SettingsmomoBureauFile.xls' n'est pas un chemin d'accès valide. Assurez-vous que le nom du chemin d'accès est correct et qu'une connexion est établie avec le serveur sur lequel réside le fichier.
Could any one help me please ?!
Thank you in advance.

View 5 Replies View Related

OpenRowSet With Excel DENIED

Oct 7, 2005

Same with OpenDataSource. SQL 2000, logged in as non-SA.Getting message:Ad hoc access to OLE DB provider 'Microsoft.Jet.OLEDB.4.0' has beendenied. You must access this provider through a linked server.Can run with SQLOLEDB with connection string to same server(obviously), but when trying to access an Excel file, get the messageabove.It appears that the file name given in the connection string to Excelis with respect to the SQL server, so I have used UNC names to thefile. Nothing.Want to avoid DTS when it's a table that I need and can't use a linkedserver because it's always a one time thing.Any tips appreciated!

View 2 Replies View Related

Openrowset Excel 2007

Jul 31, 2007

Haven't been able to find much information on using openrowset with excel 2007 xlsx files. I've tried the following with no success so far.

SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'Excel 12.0 Xml;Database=\serverfolderfile.xlsx;HDR=No;IMEX=1',
'SELECT f1 FROM [Raw Keywords$] WHERE f1 IS NOT NULL')

If anyone knows the correct way to do this please tell me.

View 3 Replies View Related

Import Data From Word,excel And Access File

Jun 12, 2007

Is it possible to import data from a word table into sql table? How to import data from access and excel worksheet into sql table?
vishwa mukh

vishwamukh

View 2 Replies View Related

How To Access To Excel,csv Or Other Formatted File Using OLE DB(SQL Native Client)?

Apr 13, 2007

Hi~.

First, is it possible to access(read/write) to the excel,csv or my-own-formatted file using OLE DB(SQL Native Client)?



If possible, how?

View 1 Replies View Related

Delete Data In Excel Using Openrowset?

Feb 23, 2008

Hello,
I would like to delete all data from an excel sheet except the headers row.
Is there any way to do this using Openrowset with JET or something like that?
Thanks
Philippe

View 26 Replies View Related

T-SQL (SS2K8) :: OPENROWSET When Excel Worksheet Name Is Unknown

Sep 7, 2011

I've created a stored procedure that accepts two arguments: the name of an Excel workbook (@workbookBillRun), and the name of the first worksheet found in that workbook (@worksheetBillRun).

Through dynamic SQL, I'm able to construct a statement that pulls out data.

SELECT @sqlBillRun = '
SELECT [ACCTNUM], [INVNUM], [RECURRING], [NON RECURRING], [USAGE],[DISCOUNT],[TAXES]
FROM OPENROWSET (''Microsoft.ACE.OLEDB.12.0'', ''Excel 12.0;;Database=' +@workbookBillRun+ ';HDR=YES'',
''SELECT * from [' +@worksheetBillRun+ '$]'')'

The workbook name will always be known: when the user uploads the file, I change the name to match a certain pattern. Example: 2011-08 AUG.xlsx

However, I won't always know the worksheet name. The workbook *should* contain just one worksheet; and the worksheet *should* be named identically to the workbook (2011-08 AUG), but it may not be named as such. And if I pass an invalid worksheet name, the code above will fail.

I've created error handling to alert the user of an incorrectly named sheet. However, I was curious whether I could extract the name of the first worksheet in the workbook from within T-SQL.

View 6 Replies View Related

Export In Excel With Using OPENROWSET From Stored Procedure

Nov 22, 2007



Hi
I am Utarsh Gajjar.
I am working on SQL Server 2005.

I have following Stored Procedure.

----------------------------------------------------------------------------
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO

ALTER PROCEDURE [dbo].[ExportInExcel]
@QueryString VarChar(8000) =''
AS
BEGIN TRY

INSERT INTO OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:Customers.xls;IMEX=1','SELECT * FROM [Sheet1$]')
EXEC (@QueryString )


END TRY
BEGIN CATCH
DECLARE @ErrorMessage VARCHAR(8000);
DECLARE @ErrorSeverity INT;
DECLARE @ErrorState INT;

SELECT @ErrorMessage = ERROR_MESSAGE(),
@ErrorSeverity = ERROR_SEVERITY(),
@ErrorState = ERROR_STATE();

RAISERROR (@ErrorMessage, -- Message text.
@ErrorSeverity, -- Severity.
@ErrorState -- State.
);
END CATCH

-------------------------------------------------------------------------------

Error is

-------------------------------------------------------------------------------
(0 row(s) affected)

Msg 50000, Level 16, State 2, Procedure ExportInExcel, Line 31
The requested operation could not be performed because OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" does not support the required transaction interface.

(1 row(s) affected)



how can i solve this problem?


Thanks in advance.

View 16 Replies View Related

OpenRowSet And OpenDataSource Fail On Production To Open Excel Data

Jun 26, 2006

The following statement fails when using SQL Analyzer under sa but works on all of our development and staging server. All are SQL Server 2005 SP1. We upgraded production over the weekend from SQL Server 2000, creating a new instance machinenameSQL2005.

SELECT *

FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',

'Excel 8.0;Database=d:data est.xls',

'SELECT * FROM [Sheet1$]')

The error we are getting only in prodcution is:

OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Unspecified error".

Msg 7303, Level 16, State 1, Line 1

Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".

Any help seriously appreciated,



Tronn

View 44 Replies View Related

Passing A Variable To A Linked Query (OPENROWSET For Excel Syntax)

May 11, 2007

Hello,

I responded to a very old discussion thread & afraid I buried it too deep.

I have studied the article: How to Pass a Variable to a Linked Query (http://support.microsoft.com/default.aspx?scid=kb;en-us;q314520)



but I have not gotten all the ''''' + @variable syntax right.



Here is my raw openrowset with what I am aiming at.






Code Snippet

-- I want to use some kind of variable, like this to use in the file:

DECLARE @FIL VARCHAR(65)

SET @FIL = 'C:company foldersDocumentationINVENTORY.xls;'

--

SELECT FROM OPENROWSET('MSDASQL', 'Driver=Microsoft Excel Driver (*.xls);DBQ=C:company foldersDocumentationINVENTORY.xls;', 'SELECT * FROM [Inventory$]')

AS DT



Anyone game? Many thank-yous, in advance.



Kind Regards,

Claudia.

View 1 Replies View Related

OPENROWSET To Access Error

Jul 20, 2005

Hi ,I have been trying to connect to access database from SQL Server 7.0.This machine is having 7.0 as a default instance and 2000 as a namedinstance.Also the machine doesn't have access installed and Microsoft.Jet.4.0is of version SP8 for Windows 2000The access database is password protected.I have tried all, OPENROWSET, OPENDATASOURCE, linked server, and ODBC.These are some of the commands which I have tried but gives followingerror.*******************************************SELECT a.*FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','F:Geerimainilling.mdb';'bhagath';'bhagath', Employee)AS aServer: Msg 7303, Level 16, State 2, Line 1Could not initialize data source object of OLE DB provider'Microsoft.Jet.OLEDB.4.0'.[OLE/DB provider returned message: Cannot start your application. Theworkgroup information file is missing or opened exclusively by anotheruser.]**********************************************SELECT * FROM OPENDATASOURCE ('Microsoft.Jet.OLEDB.4.0','DataSource="F:Geerimainilling.mdb";User ID=bhagath;Password=bhagath;JetOLEDB:SystemDatabase="c:WINNTsystem32System.mdw"')...EmployeeServer: Msg 7303, Level 16, State 2, Line 1Could not initialize data source object of OLE DB provider'Microsoft.Jet.OLEDB.4.0'.[OLE/DB provider returned message: Cannot start your application. Theworkgroup information file is missing or opened exclusively by anotheruser.]**********************************************SELECT *FROM OPENROWSET('MSDASQL','Driver={Microsoft Access Driver(*.mdb)};Dbq=F:Geerimainilling.mdb;Uid=bhagath; pwd=bhagath','SELECT*FROM Employee')Server: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'MSDASQL' reported an error.[OLE/DB provider returned message: [Microsoft][ODBC Driver Manager]Data source name not found and no default driver specified]**********************************************I have tried all possible combinations but most of the time I come upwith Error 7399.In case if anyone has some other syntax and successful with that,please let me knowRegards,Mahesh

View 1 Replies View Related

OPENROWSET Problem Connecting To Access Database

Jun 27, 2007

Hi all,

For a flexible import in our SQL database (SQL 2000 on a Windows 2003 server) we use OPENROWSET. In our development on a local instance of SQL Server, we have no problems with a connection to Accesss. However, when we deploy the same code with the same Access database to our test server we get an error indicating to use a Linked Server.

We set all neccessary parameters for allowing ad hoc queries and encounter no problems with queries to different SQL Servers and Oracle databases. Also, when we execute the query to the Access database on a local disk from a job, it works fine. Run the same query to an Access database on a fileshare from a job results in an error.

How come the OPENROWSET selection cannot be run from the query analyser or to an Access database on a fileshare? What security settings are blokking?

We use the following query:
SELECT top 10 *
FROM
OPENROWSET(
'Microsoft.Jet.OLEDB.4.0',
'C:Testdata est.mdb';
'admin';'',Table1)

Thanks for all your help,
Nils

View 1 Replies View Related

Recurring Issue - OPENROWSET For Excel Query Stops Working , Cured By Restart Of SQL Server

May 25, 2007

Hi,

I am having a recurring issue that involves a stored proc using OPENROWSET to query an excel file. I used the surface area config to enable this on the server, and made sure that is still set. After an undetermined amount of time, the OPENROWSET query starts failing with this message:

OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Unspecified error".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".

I corrected this previously by restarting the SQL server, but not before I checked permissions, the excel file itself, etc, and that was the last thing to try.

I am using SQL 2005 with SP1 installed - my primary approach to tackling this issue is to install the SP2, but I did not find this bug referenced in the fixes, and was wondering if anyone else had further insight.

Thanks,
Darrell Young

View 3 Replies View Related

What Syntax Should I Use To Connect To Access DB (having System Database) Via OPENROWSET?

Aug 9, 2007

MS SQL Server 2005 Express.
I'm trying to connect to Access DB (having System Database) via OPENROWSET.
Everything (client, server and access file) is on local drive.

This works (ODBC):


select *
from openrowset('MSDASQL',
'Driver={Microsoft Access Driver (*.mdb)};Dbq=C:MBK.mdb;SystemDB=C:SECURED.MDW;Uid=me;Pwd=pw;',
'select * from [Mbk]')

This works (Jet.OLEDB):

select *
from opendatasource('Microsoft.Jet.OLEDB.4.0',
'Data Source=C:MBK.mdb;Jet OLEDBystem Database=C:SECURED.MDW;User ID=me;Password=pw;')
...Mbk

This won't work (Jet.OLEDB):

select *
from openrowset('Microsoft.Jet.OLEDB.4.0',
'MS Access;Database=C:MBK.mdb;System Database=C:SECURED.MDW;UID=me;PWD=pw;',
'select * from [Mbk]')

saying ... "Wrong argument".

This won't work (Jet.OLEDB):

select *
from openrowset('Microsoft.Jet.OLEDB.4.0',
'MS Access;Database=C:MBK.mdb;SystemDB=C:SECURED.MDW;UID=me;PWD=pw;',
'select * from [Mbk]')

saying ... "There are no permissions for usage of object C:MBK.mdb". It seems that it simply hasn't found system database file C:SECURED.MDW, cause when I change SystemDB=C:SECURED.MDW to something like BlahBlahBlah=C:SECURED.MDW the same message is shown.

So, what is the right syntax for stating System Database in OPENROWSET query string? And why 'System Database' won't work?

Thank you.

View 1 Replies View Related

HELP: How To Access Lotus Notes Database Using SQL 2005 Openrowset Command?

Mar 3, 2008

Any advice on how to achieve the above, if possible, would be greatly appreciated.

Cheers,
j.

View 1 Replies View Related

SSIS Package Access Files Via Openrowset Strange Problem?

Sep 7, 2007

I have three machine:

S: Running SQL Server Express
V: Running SSIS package in VS.Net
F: Shared folder host excel files

And an openrowset SQL statement: select * from openrowset(..... \Fexcel.xls....). This statement can be run in SS management studio connecting to S using my Windows logon(integration security) without any problem.

However, the same SQL running inside SSIS package (integration security using my Windows account) get the following error:


Error: 0x0 at Check headers: OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "The Microsoft Jet database engine cannot open the file '\Fexcel.xls'. It is already opened exclusively by another user, or you need permission to view its data.".

Error: 0xC002F210 at Check headers, Execute SQL Task: Executing the query "....openrowset....." failed with the following error: "Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.



(My Windows account is administrator of Windows and sysadmin or SQL Sever Express on S)

View 1 Replies View Related

Distributed Query: Import XML Using OpenRowSet Bulk From UNC - Access Denied

Feb 26, 2008

I'm experiencing issues importing XML data using a distributed query with the following statement which is run from an XP client named WorkstationA connecting to SQL2005 SP2 ServerB, the XML data is located on ServerC.


AdHoc Queries using OpenRowSet has been enabled and verified.


The SQL Server service is running using a domain user account with permissions to read the remote files. I have logged in locally to the SQL server and verified this. It still fails even if the SQL services are running using LocalSystem.

User on Workstation A is authenticated with Integrated security (SQL Admin) and has rights to read the XML files on ServerC.

WorkStationA = SQL2005 Mgt Studio running the query
ServerB = SQL2005 SP2
ServerC = XML data files


DECLARE @xml XML
SELECT @xml =CONVERT(XML, bulkcolumn, 2)
FROM OPENROWSET(BULK '\SERVERCSHAREPATHDATAFILE.XML', SINGLE_BLOB) AS x
SELECT @xml


Results: Msg 4861, Level 16, State 1, Line 2

Cannot bulk load because the file "\SERVERCSHAREPATHDATAFILE.XML" could not be opened. Operating system error code 5(Access Denied).


The query fails when it is run from Workstation A connected to SQL ServerB querying data on ServerC via a UNC.
The query is succesful when it is run from the local SQL ServerB. The problem is with distributed queries.
The query is succesful when the XML files are local to the SQL server including referencing them via a local UNC

Thank you for any responses.



Hamish

View 4 Replies View Related

OpenRowset On A DBase IV File

May 26, 2000

Has anyone had any experience using the openrowset function to access a dbase IV file? I can access the file using ADO from within VB but not getting anywhere using openrowset. If anyone knows the syntax or has an example it would be greatly appreciated.

Thanks in advance...

Jim

View 4 Replies View Related

Openrowset To Text File

Mar 29, 2002

Can I use OPENROWSET in Query Analyzer to connect to a text file in a SELECT statement and/or an INSERT statement? I need to move data from a text file to a SQL Server db. But, I can't figure out the right parameters for the OPENROWSET method. Thanks for any help.

Gerald

View 1 Replies View Related

OPENROWSET On XML File Through HTTP

May 7, 2008

Hi everyone,


I am currently using the OPENROWSET command to read a XML file.


-- Use OPENROWSET to read an XML file from the file system

SELECT @xml = BulkColumn

FROM OPENROWSET(BULK 'c:file.xml', SINGLE_BLOB) TempXML


However, the file I wish to process is being generated externally and published through a web server. The file is constantly being updated, and I need to have the latest data frequently. Is it possible to do something along the lines of:


-- Use OPENROWSET to read an XML file from the file system
SELECT @xml = BulkColumn

FROM OPENROWSET(BULK 'http://webserver/file.xml', SINGLE_BLOB) TempXML


If it is not possible, can someone recommend the best method to copy/download the file? I have considered standalone Windows Services and utilizing SQL Server. Are there significant pros or cons to either approach? Are there other methods I am not awere of? Any feedback on this would be greatly appreciated.


Thanks,


Matt K.

View 3 Replies View Related

From Sql Column To File, OPENROWSET?

Aug 28, 2006

Hi There

I am using OPENROWSET to import a file from disk to a varbinary(max) column in sql server.

However as far as i can see OPENROWSET is only to import into Sql Server. However i need to reverse this as well, by that i mean export a varbinary(max) column data to a file on disk. How can i do this ? (The file is a compress text file).

How does this work for file types, i mean you can import any file as binary but when you export it back to disk will the file typr still work, will a .xls or a.exe imprted and exported like this still function 100%.

Thanx?

View 9 Replies View Related

Certain Numeric Fields Not Read From The Excel File When Using A Excel File Source.

Jul 20, 2006

I have the Excel Connection Manager and Source to read the contents from an Excel file. For some reason couple of numeric fields from the Excel worksheet are brought over as nulls even though they have a value of 300 and 150. I am not sure why this is happening. I looked into the format of the fields and they are set to General in Excel, I tried setting them to numeric and that did not help.

All the other content from the excel file is coming thru except for the 2 numeric fields.

I tried to bring the contents from the excel source to a text file in csv format and for some reason the 2 numeric fields came out as blank.

Any inputs on getting this addressed will be much appreciated.

Thanks,

Manisha

View 5 Replies View Related

OPENROWSET Format File Dynamic

May 22, 2008

Hi,

Can someone please point me as to where I can find info for the following. I have seen this somewhere but I am unable to find it.

I am trying to do
INSERT INTO Table
SELECT ...
FROM OPENROWSET(BULK '\sharedDriveDataFile.txt',
FORMATFILE = '\sharedDriveFormatFile.txt',
FIRSTROW = 2)
AS Q

How can I make that shared drive dynamic? as such..hoping not to use dynaic SQL
INSERT INTO Table
SELECT ...
FROM OPENROWSET(BULK @SharedDrive DataFile.txt',
FORMATFILE = @SharedDrive FormatFile.txt',
FIRSTROW = 2)
AS Q

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved