After restarting the SQL Sever agents, I can not connect to the server from my desktop via Enterprise manager or analyzer, but everything seems find on the server side. the error message is as follows: "a connection could not be established to [servername]
reason: SQL Server does not exist or access denied ConnectionOpen (Connect())..
I have not attempted to reboot the server yet, I would like to try to resolve the problem withoutout having to do this (last alternative)
setup:
SQL Server 2000 Service pack 3
running on Server 2000.
any help would be appreciated, thank you
I have a problem with the connection to the DB… I wrote this connection string in the web.config <add name="dbConnectionString" connectionString="server=(local);database=2C2M;Trusted_connection = True" providerName="System.Data.SqlClient"/>But then when I creat ( SQLdataSource ) and chose this connection , this message is appeared DataBase schema could not be retrieved for this connection . Please make sure the connection setting are correct and that the database is online. An error has occurred while establishing a connection to the sever . When connection to SQL Server 2005 , this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections. ( provider : Named Pipes provider , error : 40 – Could not open connection to SQL Server ) How I can solve this problem ? Note : I use SQL EXRESS SERVER
We want to run Unix Scripts on SunSolaris which Connected to MS SQLServer 2000.We would like to connect to SQL Server 2000 from Solaris. Is there anyway to connect to Sql Server 2000 natively (just like isql we use inwindows which has the client) with the help of third party ct library?or any other drivers or tools???TIA
Iam trying to connect to local copy of sql sever express from the command prompt with this command(sqlcmd) but i get the error below. What should i do to overcome the error. Basically what i want to do is to try out some commandline backup utilities and i deadly want to know how to do a backup from the command prompt. Help is greatly appreciated. HResult 0x2, level 16, state 1 Named pipes provider: could not open a connection to sql sever [2] sqlcmd: Error: Microsft sql native client: An error has occurred while estarblishing a connection to the sever. When connecting to sql sever 2005, this failure may be caused by the fact that under the default settings SQL sever does not allow remote connections.. Sqlcmd: Error: Microsoft sql native client: Login time out expired.
I recently upgraded from SQL Server 2000 to SQL Server 2005. I have Oracle databases I need to share data with. I was using the Heterogeneous Services (hsodbc) from Oracle and connected to SS 2000 fine. Since I've upgraded, I can't use hsodbc to connect to my SS 2005 database. I get the following error:
ORACLE GENERIC GATEWAY Log File Started at 2006-09-06T09:40:07
I want to connect to a SQL server from my workstation using the application in the Subject, but I need to connect as a different Windows user. Basically, I login to my workstation with my "Joe User" account, but for servers I used my "Joe Admin" account for security purposes. However, the Management console autofills in my workstation username when I select "Windows authentication" for the connection, and grays out the username/password fields so that I cannot specify another set of credentials.
Is there a way to change this behavior? Otherwise I will need to termserv into a server using my administrative account, install the management software there, and then begin the process. That is a lot of unecessary overhead that I would like to avoid.
Is it possible to connect SQL Sever 2005 Express from SQL Sever 2000 Enterprise Manager? Tried to connect but got the error message "must use SQL Server management tools to connect this sever"
Hello, I'm trying to locate the Sql Server MyCompany database. Does anyone one know where I can get a copy for download? Thanks in advance for your help.GreaseLightning
Hello,I'm wondering if someone could help me to find the answer for this questionI'm connecting to SQL server database using the server name. When i remove or type the server name in wrong spelling, no errors being catched or even rised!!!!!How can i catch if the server name is incorrect?regards
I know that my server name is FRANK because thats what it says on my Sql Service manager.
And i use that same server name when i connect from my Server Explorer(using Visual Studio.NET) and then i get a listing of the the Databases that are associated with my SQL Server.
I have no problems coonecting to an Access dataBase using OLedbConnection
I did not use Sql server for 2 weeks and now it shows the red small square on the server icon for SQL Server indication it is stopped. I can not now start it, it says access denies or not exist. Can you please help me to connect to it again as i do not want to re-install and los the databases. I have done nothing to it apart from i change my windows password as the system in the company you have to change it every 3 months, Do you think that might affects?
hi, I do have a couple of database and store procedures in 6.5... I want to confirm that I will not run into any problems before I upgrade to 7.0 . Is the upgrade pain free? By using the wizard, I will make sure that all upgrade will go right?
any feedback from guys who have already upgraded.. Please give me feeback
I have a situation where I might want to pull(select) some information from a DB2 database, and possibly push(insert) some data to the same DB2 database. I am sure this is being done in the real world. WHat software, infrastrucure, etc would I need to accomplish this. Is it as simple as using DTS and the proper drivers, or are their better products and solutions. ANy input appreciated.
Hi, I have installed SQL 2000 on my system and when I try to start it gives me an error saying 'ordinal 29 cant be found in the dynamic link library odbcbcp.dll. Please advice!!
I am trying to create a SQL Agent job with 3 steps.
I want to delete three tables.
Step 1 ...delete table "X"
Step 2 ...delete table "X"
Step 3 ...delete table "X"
problem is that afer i create the three steps and start the job it never seems to finish the first steps and non of the other steps run, the job looks like is executing and never finishes. I break the job into three jobs each completes fine. I need this to runs one job, any ideas?
I don't have any errors to share, but I have a question.
What kind of problems (if any) would I encounter if the computer name where SQL Server 2000 or 2005 was installed included special characters? An example would be FNB_(1).
Hi everyone,I need help in inserting a date time string to sql sever. For example, how do you insert textbox1.text="2006-08-30 09:00:00" into a datatable column names starttime (type datetime) in sql sever? How do I covert the format of this string before I do the insert?Thanks.a123.
Hi everyone,How do you insert this string value lable1.text="2006-08-30 09:00:00" into a data column like startdate (type: datetime) in sql sever?How do I convert this string value before I insert it into sql sever? Thank you very much.a123.
hi I have two questions: 1. I want a code to save data typed in a textbox during runtime using SQL server database. The database has a table with several colums where i have to reference the necessary column. 2. Can i use a Gridview to enter data during runtime and save the same data to the database? that is, INSERTING data to the database.
Connection failed: SQL State '37000' SQL Sever Error: 18452 [Microsoft][ODBC SQL Sever Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
I have verified in Enterprise Manager that the concerened login is using a Windows 2000 Authentication and has the correct grant access permissions set up for the default database. Also switching to SQL Server Authentication or disabling security are not the options available in this case.
One of my developers is trying to register a SQLServer server (Win 2000, SQL 2000) using Enterprise Manager. He receives the message below;
A connection could not be established to sever_name. Reason: "EXECUTE permission denied on objedt 'sp_MSSQLDMO80_version'.
His login is in an NT group and I added the login the way I've always done. I even tried adding his login alone. No luck. He can register other servers, just not this one. He can connect and run queries on this server using Query Analyzer without issue.
I tried granting explicit execute rights to the sp but the error pops up again but on a different sp this time.
This is not my server and is under the direct control of another dba and IT group. I spoke with them and they were clueless about any security setup/configuration that may have been done.
I have two SQL server one in the office and other on remote location. I have some data on SQL in the office and some data on remote location and need to query the data.
I have a SQL Server 2000 running on win 2003 where there is Linked Sever. Recently we have upgrade the SQL server 2000 to SQL 2005 and things were fine but suddenly one day things stopped working when I have tested the connection for link server. It failed and gave me this error. What could be the possible error .
The source it is linked is a System DSN which is linking is a remote server running Informix Database. The driver is Informix CLI-2.5 (32 bit). Is it the driver that is the cause of error or what ???
"The test connection to the linked server failed." =================================== An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ Program Location: at Microsoft.SqlServer.Management.Common.ServerConnec tion.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecutionManage r.ExecuteNonQuery(String cmd) at Microsoft.SqlServer.Management.Smo.LinkedServer.Te stConnection() at Microsoft.SqlServer.Management.UI.VSIntegration.Ob jectExplorer.LinkedServerConnectionTest.Invoke() =================================== Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "INFORMIX_LIBRARY". OLE DB provider "MSDASQL" for linked server "INFORMIX_LIBRARY" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". OLE DB provider "MSDASQL" for linked server "INFORMIX_LIBRARY" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". OLE DB provider "MSDASQL" for linked server "INFORMIX_LIBRARY" returned message "[INTERSOLV][ODBC Informix driver][Informix]Unable to load locale categories.". (.Net SqlClient Data Provider)
I have stored procedure which dynamically creates a job with 3 job steps which will eventually runs 3 SSIS packages in a sequence. But i dont know why it is skipping the 2nd step and executing the 3rd step. I can clearly observe it in the logs.
And if comment the 3rd step and re-run the job, now it is executing the 1st and 2nd step in a sequence. I can see the log for 2nd package also. Again i uncommented the code for calling the 3rd step which loads data into Oracle tables. This time again it is skipping the 2nd step. I dont know the reason why it is happening so. It is really frustrating me a lot. IS there any precedence/ priority given while loading data into Oracle database?
Job steps First step loads data from staging database to ODS Second step loads data from ODS to DataMart Third step loads data from DataMart to Oracle Tables
Can anyone please help me out.
I have tried all options.
Here is my stored procedure. Is anything wrong in the below stored procedure.
