Can Not See Columns In Query Design View

Nov 3, 2006

Even though I select "Column Names" in Design View when creating a query (or view), only "* (All Columns)" appears in the table box.

In InfoPath, when I connect a combo-box, err drop down box, to the database, I am unable to connect directly to a table... no tables are shown. If I select a different database, these problems do not exist.

I can not find any setting to allow these columns to be shown in the design view or any setting that will "expose" the tables in InfoPath.

I tried creating a new database and exporting the data, tables and data, from the troubled DB to the new DB; however, the new DB exhibited the same behaviour. The system tables, Master and Model, have the same behaviour. Please help me with your ideas and suggestions... thank you very much for your time.

This database was upsized from Access 2003 to SQL Server 2000 SP4.

rogge

View 7 Replies


ADVERTISEMENT

DB Design :: Alter View To Add Columns

Jun 9, 2015

I would like to alter view to add columns. My base table is populated by application and the base table name is always change. Is there any way to add some extra columns to this view.

One way is to create a sp to add columns and use the view inside the sp. But I would like to know is there any way to alter the view. 

View 4 Replies View Related

SQL Query Analyzer -&> Design View -&>Save

May 14, 2007

in SQL Query analyzer i get the desired result for the following querry succesfull.

But can any one help me in getting the same result in design view so that i can save this view and get the required result on my aspx page.(Web page)

A beginer !!!! not much familiar with MS SQl.....HELP>>>

USE nfxdash SELECT *, DATEDIFF(day, Date_Opened, getdate()) AS no_of_days
FROM nf_Tickets

View 1 Replies View Related

In Query Builder Design View, How Does The Filter Operator MDX Work?

Nov 12, 2007

Good morning all,

I have searched everywhere for this and I can't find any information on it. When I use the Query Builder, in the top pane, the Filter pane, there are five columnsimension, Hierarchy, Operator, Filter Expession and Parameters.

In the dropdown for Operator, one of the choices is MDX. I cannot find any documentation on how to use this operator. I want to limit my filter to SELF_AND_AFTER, and I am hoping that this is possible using this operator. I know how to hand code it, but I have a ton of other tweaks to make to the query, so I want to use the Query Designer as much as I can.

Does anyone have any links to documentation on how to use this operator?

Thanks,
Kathryn

View 2 Replies View Related

Query To View With Many Columns

Jul 31, 2007

Hi All,
I have a simple question. If I have a view that query from joined multiple tables and return a lot of columns (more than 100). If I run a simple query just return several columns (e.g. 4-5 columns), will SQL Server query all columns first from all joined table? or can SQL Server query only necessary column from related table?


Does anyone have idea how to join table that can reflect both left and right join?
Table A Table B
Column1 Column2 Column3 Column4 Column1 Column2 Column 3 Column5
A Jan 5 xxx A Jan 1 yyy
B Feb 3 C Mar 4
B Mar 4 C Apr 3
C Apr 2 D May 2
E Mar 1

Result Table
Column1 Column2 Column3 Column4 Column 5
A Jan 6 (= 5+1) xxx yyyy
B Feb 3
B Mar 4
C Mar 4
C Apr 5 (= 2+3)
D May 2
E Mar 1

So the result table is a join on column1 and column2 (both are primary key), with column3 is a sum aggregate. Table A has additional column4 and Table B has additional column5, so quite difficult to union (In fact, there are a lot of column differences between table).

Thanks for the help.

View 3 Replies View Related

Write A CREATE VIEW Statement That Defines A View Named Invoice Basic That Returns Three Columns

Jul 24, 2012

Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.

This is what I have so far,

CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID

[code]...

View 2 Replies View Related

Matching A View's Columns To It's Underlying Table's Columns

Jul 20, 2005

Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name

View 2 Replies View Related

Design View Of Table

Jul 25, 2001

How do you get the design view of a table in sql server query analyser?
I know in oracle its desc table_name.
Thanks

View 6 Replies View Related

View Design Problem

Nov 22, 2005

hi
suppose that i have 2 tables:
TBCars(Keep information about one car like model,plaqueNo, owner,...)
&
TBServices(keep service information,like serviceType,serviceDate,..)

in this system, when a car for a first time enter to this system, i insert 1 record for it into TBCar, from second time, every time this car enter to system, one record inserted into TBServices(that refer to 1 record in TBCar,1-& relationship).

now i build a VIEW with these fields:

IDCar,Model,PlaqueNo,Owner,ServiceType,ServiceDate

the expected result from this view, return n record that n is number of records in TBServices. but i want 1 record in result for every car in TBCar.
in this result grid, serviceDate & serviceType is the last record inserted into TBServices.
& i want records in TBCars that dont have any child in TBServices come into my VIEW.

View 1 Replies View Related

Permissions To See Design View

Jul 23, 2005

Is there a way to allow users to see the design view of a table withouthaving dbo permissions?Thanks

View 1 Replies View Related

DB Design :: View Or Trigger

Jun 10, 2015

i have a question about updating views:for example: lets assume we have a table which keep the users score and we have a view which created from so many tables and calculate the sum of the users scores. now if one of the user's score changes all the view created again or just part of the view will update?i ask this to find out how can i design my database? how can calculate users scores?i can wrote a trigger to do it or use the view. which way is faster and better in this case?

View 9 Replies View Related

Conditional Statement In View Design

Apr 10, 2008

Have a View where I need to enter a conditional IF_THEN_ELSE statement in a new field (field has an alias). If this were an Access query I would do following:

IIf([dbo.AR1_CustomerMaster.EmailAddress] Is Null, "A", "B")

How can I accomplish same in View design??

View 2 Replies View Related

How To Get Today's Date In View Design

Feb 28, 2008

I need to control DOF (date of order) which data type is datetime for today's date.
I use 1) or 2) but got null.
1) = getdate(),
2) = DATEADD(day, DATEDIFF(day, 0, GETDATE()), 0)
I use
between '2/28/2008' and '2/28/2008'
will get result.
How to get today's date?

View 7 Replies View Related

Analysis :: Cube XML Is Different Than Design View

Aug 4, 2015

I have a cube. Its xml is different at some point than its design view. Suppose for some dimension and its attributes, source table is different than what it showing in the properties window for them..

Is this possible? How to read cube xml because there are repeating tags in it. There are two type if dimension tags.. one has only attributed and other has all properties.

View 7 Replies View Related

How Can I Add Pictures To My Database Filed In Design View?

Nov 7, 2007

I have a database called ‘Objects’ which has many field. One of its fields is called ‘Image’ and has a data type image. 
I want to add pictures to each one of my records offline, is this possible?  i.e. by copying the address from my C drive such as C:Documents and SettingsfseyedarabiMy DocumentsMy Pictures
 

View 1 Replies View Related

Can't View Table Design Or Return All Rows

Jul 30, 2000

Help, is something wrong with my SL Server? I am unable to return any rows from all tables in all databases (user and system)on My SQL 7.0 SP2 machine. Whne i right click on the table in E.M and select design or open table i get no results. Does anyone know why this is happening? It did not always happen either.
Thanks

View 1 Replies View Related

How Can I View The Design Of The Ssis Package After Migration

Jun 8, 2007

OK, I was able to successfully migrate all of my DTS packages to SSIS, for SQL 2005. I can log into intergration services and see my packages listed under:

servername --> stored packages --> msdb. Now my question is, how can I open these packages, not run them open them in a design mode like you can in SQL 2000, you can double click on the package name and view the design of the package. how can i do that now that I have them in SQL 2005?







View 6 Replies View Related

DB Design :: How To Select NULL Values In A View

Sep 15, 2015

I am creating a view and want to select records where the value of a Customer field (Klant Test Plan) is NULL or has exact the same value as for example customer field 2 (Klant Schedule).

I have already the code below:

SELECT DISTINCT
                      TOP (100) PERCENT dbo.Product.ERPKey, dbo.TestPlan.CoA, dbo.TestMethod.WorkInstruction, dbo.Customer.Name AS [Klant Testplan],
                      Customer_1.Name AS [Klant Schedule], LEFT(dbo.ShopFloor.ShopFloorNumber, 7) AS Schedule,
                      CASE WHEN Customer_1.Name = 'ItsMe BV' THEN Customer.Name ELSE Customer_1.Name END AS Customer
FROM         dbo.Customer AS Customer_1 INNER JOIN

[Code] ....

View 9 Replies View Related

DB Design :: How To Switch Security Context In A View

Jun 5, 2015

I have 2 databases one for datawarehouse and one for reporting.

I created a view in the reporting database joining several tables from datawahourse. The view is meant for a users who uses powerpivot. It will contain a few million of rows.

I set up a role in the reporting database. I assigned select rights to that role on the view.

When the  user wants to access the view, he can see the view but a select gives

The server principal "pp_user" is not able to access the database "datawarehouse" under the current security context.

How can I fix this ? I don't want to give the user select rights on tables in the datawarehouse.

View 3 Replies View Related

DB Design :: Schema Binding A View In Management Studio

Oct 13, 2015

I'm using SQL Server 2008 R2 Management Studio. I have a view that I'd like to index. Obviously, that requires that the view be schema bound to the underlying table. I have found myriad explanations for how to programmatically create a schema bound view, but I've never created a view like that before, and since I'm more a mechanical engineer than a database manager, I'd like to be able to do it the 'easy' way, by just creating the view in Management Studio by going to the database, right clicking on 'Views', clicking on 'New View...' and then, hopefully, checking some box somewhere that schema binds the table to the view.

View 2 Replies View Related

DB Design :: Rename Table Cannot Be Found In View Designer

Jul 8, 2015

I renamed a database table, and then try to create a view with that table. However, the renamed table does not appear in view designer. I have to close and re-open SQL Server Management studio 2014.

View 5 Replies View Related

DB Design :: Unable To View Table Record In Database?

Jul 24, 2015

I am creating a simple application form using visual studio 2015. I can create database.mdf successfully and create dbo.table successfully. but when i tried to view table by expanding the table icon on the server explorer, the table should be able to show list of table but it didn't show any record and why is it like that.

View 4 Replies View Related

Database Design/query Design

Feb 13, 2002

Ok, I'm doing a football database for fixtures and stuff. The problem I am having is that in a fixture, there is both a home, and an away team. The tables as a result are something like this:

-------
Fixture
-------
fix_id
fix_date
fix_played

----
Team
----
tem_id
tem_name

-----------
TeamFixture
-----------
fix_id
tem_id
homeorawayteam
goals

It's not exactly like that, but you get the point. The question is, can I do a fixture query which results in one record per fixture, showing both teams details. The first in a hometeam field and the second in an away team field.

Fixture contains the details about the fixture like date and fixture id and has it been played

Team contains team info like team id, name, associated graphic

TeamFixture is the table which links the fixture to it's home and away team.

TeamFixture exists to prevent a many to many type relationship.

Make sense? Sorry if this turns out to be really easy, just can't get my head around it at the mo!

View 2 Replies View Related

Changing To Design View Of A Reporting Services Report File

Nov 13, 2007

When I am working on an Integrations Services project and I open a Reporting Services file, it displays it in the Code view. Is there a way to display it in the Design view? Or do I have to close the project and open up a Reporting Services project?

Fred

View 1 Replies View Related

Question On Design With Identity Columns

Aug 23, 2005

Normally when I have a "Many-toMany" or linkage table where the primary key consists of a foreign key from two different tables, I do not bother to make a separate identiy column instead.Does anyone see a reason why an identity column would be more or less desireable ? For exampleTable Person PK  - PersonIDTable Car PK  - CarIDTable PersonCar PK (PersonID, CarID)Or would it be better to make an Identity Column such as PersonCarID so then the table would look like the following:Table  PersonCarPK - (PersonCarID)FK - PersonIDFK - CarIDCreate Unique Constraint on Person and CarIDAny feedback is appreciated

View 46 Replies View Related

DB Design :: Maximum Number Of Columns

Jun 3, 2015

I am adding a table within my vb.net program using New datatable(tblname) function, then adding 22 columns (col01 to col22) to this table using .columns.add (colname) function without any error.The program however throws an exception when trying to assign a value to column number 14 (col14) saying this column does not belong to table tblname. Assigning a value from col01 to col13 is working fine.Is there a limitation on number of columns can be added to a table using code?

View 2 Replies View Related

Copying Columns To Table With Different Design

Jun 17, 2006

I am working with a SQL database that was migrated from MS Access and adapted for full-text search which involved creating a new table with a different design. I would like to copy three columns (YearGiven, MonthGiven, DayGiven) from the Documents table to the newly-created FullDocuments table so that I can delete the Documents table and four other tables with redundant data. Here are the two tables involved in the column copy:

Documents Table
DocID (Primary Key)
DocNo
SequenceNo
YearGiven
MonthGiven
DayGiven

FullDocuments Table
FullDocID (Primary Key)
DocNo
SequenceNo
SectionText
YearGiven (empty €“ no data)
MonthGiven (empty €“ no data)
DayGiven (empty €“ no data)

After the copy column procedure I want the FullDocuments table structure to look like this:

FullDocuments Table
FullDocID (Primary Key)
DocNo
SequenceNo
SectionText
YearGiven (full of transferred data)
MonthGiven (full of transferred data)
DayGiven (full of transferred data)

The problem is that the FullDocuments table contains approximately 4x as many rows as the Documents table. This is because each document has four types €“ the primary Text document and three supplemental documents (Background, Report, and Index). Whereas the Documents table has one row for each Document, the Full Documents table has four rows per document (the four document types). Instead of simply doing a copy and paste of columns based on a primary key and foreign key relationship (as described in the MSDN online books), I need to copy and paste based on the DocNo and SequenceNo columns. Thus the same date data (Year, Month, Day) will need to occupy four consecutive rows for each document in the FullDocuments table (as is now the case with the DocNo and SequenceNo).

I will end up with one table that meets the requirements for the full-text search (primary key and all the text to be searched) and eliminate five tables (Documents and the four document type text tables). This is a static database consisting of historical records so I am not concerned about input errors that can be associated with denormalization.

I tried exporting the data using the Export Wizard using the €œCopy data from one or more tables€? option. The transfer failed. The most relevant lines of the Error Report are:


·Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert the value NULL into column 'FullDocumentID', table 'Documents.dbo.FullDocuments'; column does not allow nulls. INSERT fails.".
(SQL Server Import and Export Wizard)
·Error 0xc0047022: Data Flow Task: The ProcessInput method on component "Destination - FullDocuments" (61) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
(SQL Server Import and Export Wizard)

·Error 0xc0047021: Data Flow Task: Thread "WorkThread0" has exited with error code 0xC0202009.
(SQL Server Import and Export Wizard)
I then tried the €œWrite a query to specify the data to transfer€? option focusing on just the YearGiven column using various FETCH, INSERT AND UPDATE commands without any luck. Questions:

1. Is the query approach the best way to achieve my objective, or did I miss something in the €œCopy data€? option in the Export Wizard?

2. If the query approach is the best way, any suggestions on what the query will look like?

Thanks for any help you can provide.

View 5 Replies View Related

DB Design :: Two Columns - How To Extract Substring

Apr 23, 2015

I have two columns "Project Name" and "Flag". 

Now i want to find out all the project names which contain a particular substring in it, like say - "SRM" and update the "Flag" column to value 1 for all those projects.

View 15 Replies View Related

Different Query Plans For View And View Definition Statement

Mar 9, 2006

I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?

View 10 Replies View Related

DB Design :: How To Split One Column Into Two Columns In Server

Mar 6, 2015

I have a ipaddress column is there where i need to split the column into two columns because of values like below

172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874
172.26.248.8,Fe80::7033:acba:a4bd:f874

I have written the below query but it will throuh some error.

  select SUBSTRING(IPAddress0, 1, CHARINDEX(',', IPAddress0) - 1) as IPAddress0 
   from IPADDRESS
error:
Msg 537, Level 16, State 2, Line 1

Invalid length parameter passed to the LEFT or SUBSTRING function.

View 16 Replies View Related

Retaining Fields For Multiple Models In Mining Model Prediction Tab Design View

Nov 29, 2006

I am using BI Dev Studio for SS2005 in a research (as opposed to a production) environment. Often I want to compare the results of multiple models using the same attributes. If I switch to a different model, the Design view completely resets. Is there any way to retain the same field names with different models in the Design view?

My current workaround is to give my models similar names with AR, DT, CL, LOG, NN suffixes and make global changes in the DMX.

I have consulted the following without finding an answer:
http://msdn2.microsoft.com/en-us/library/ms178445.aspx
http://msdn2.microsoft.com/en-us/library/ms175642.aspx
http://msdn2.microsoft.com/en-us/library/ms175678.aspx
http://msdn2.microsoft.com/en-us/library/ms175637.aspx

Thanks for your help,

Sam

View 3 Replies View Related

Database Table Design For Huge Number Of Columns

Jan 24, 2008

Hi

I have a table (Sql server 2000) which has 14 cost columns for each record, and now due to a new requirement, I have 2 taxes which needs to be applied on two more fields called Share1 and share 2
e.g
Sales tax = 10%
Use Tax = 10%
Share1 = 60%
Share2 = 40%

So Sales tax Amt (A) = Cost1 * Share1 * Sales Tax
So Use tax Amt (B) = cost1 * share2 * Use tax

same calculation for all the costs and then total cost with Sales tax = Cost 1 + A , Cost 2 + A and so on..
and total cost with Use tax = Cost1 +B, Cost 2 +B etc.

So there are around 14 new fields required to save Sales Tax amt for each cost, another 14 new fields to store Cost with Sales Tax, Cost with Use tax. So that increases the table size.
Some of these fields might be used for making reports.

I was wondering which is a better approach out of the below 3:
1) To calculate these fields dynamically while displaying them on the User interface and not save in DB (while making reports, again calculate these fields dynamically and show), or
2) Add new formula field columns in database table to save each field, which would make the table size bigger, but reporting becomes easier.
3) Add only those columns in database on which reports needs to be made, calculate rest of the fields dynamically on screen.

Your help is greatly appreciated.
Thanks

View 3 Replies View Related

Database Table Design For Huge Number Of Columns

Jan 24, 2008

Hi

I have a table (Sql server 2000) which has 14 cost columns for each record, and now due to a new requirement, I have 2 taxes which needs to be applied on two more fields called Share1 and share 2
e.g
Sales tax = 10%
Use Tax = 10%
Share1 = 60%
Share2 = 40%

So Sales tax Amt (A) = Cost1 * Share1 * Sales Tax
So Use tax Amt (B) = cost1 * share2 * Use tax

same calculation for all the costs and then total cost with Sales tax = Cost 1 + A , Cost 2 + A and so on..
and total cost with Use tax = Cost1 +B, Cost 2 +B etc.

So there are around 14 new fields required to save Sales Tax amt for each cost, another 14 new fields to store Cost with Sales Tax, Cost with Use tax. So that increases the table size.
Some of these fields might be used for making reports.

I was wondering which is a better approach out of the below 4:
1) To calculate these fields dynamically while displaying them on the User interface and not save in DB (while making reports, again calculate these fields dynamically and show), or
2) Add new formula field columns in database table to save each field, which would make the table size bigger, but reporting becomes easier.
3) Add only those columns in database on which reports needs to be made, calculate rest of the fields dynamically on screen.

4) Create a view just for reports, and calculate values dynamically in UI and not adding any computed values in table.



Your help is greatly appreciated.
Thanks

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved