Select * from myTable where myTable_ID in (2,6,7,9)
I want to build the list of values that are in parenthesis, in my VB code and pass it in through a parameter, so it's like this:
Select * from myTable where myTable_ID in (@myValues)
Is this possible? I tried it where myValues = '2,6,7,9' but am getting a conversion error. I'm starting to believe it's not possible to do what I'm trying to do. Is there another way?
I have a multiselect checkbox list in my UI. I pass the list items to my stored proc as comma separated parameter and then I have a function which converts this parameter to a table with separate rows.
E.g. : a,b,c,d
Converted to result table
result a b c d
I want to insert each row of the result table into another table. How to do that.
E.g., the table after the function is :
CREATE TABLE #result ( Subject varchar(100) )
insert into #result values ('a') insert into #result values ('b') insert into #result values ('c') insert into #result values ('d')
Ok, I want to write a stored procedure / query that says the following: Code: If any of the items in list 'A' also appear in list 'B' --return false If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF (SELECT values FROM tableA) IN(SELECT values FROM tableB) Return False ELSE Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns." How can I do this?
Insert Query: insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE) SELECT DISTINCT tri_IDENT.IDA AS PPID, tri_Ldg_Tran.CLM_ID AS PTicketNum, tri_ClaimChg.Line_No AS PLineNum, tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT' THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate, tri_Ldg_Tran.Tran_Date AS PEntryDate, tri_ClaimChg.Hsp_Code AS PHCPCCode, tri_Ldg_Tran.Adj_Type, tri_Ldg_Tran.PRS_ID, tri_Ldg_Tran.Create_Time, tri_Ldg_Tran.Adj_Group, tri_Ldg_Tran.Payer_ID, tri_Ldg_Tran.TRN_ID, tri_ClaimChg.Primary_Claim, tri_IDENT.Version FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc = qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN tri_Ldg_Tran RIGHT OUTER JOIN tri_IDENT LEFT OUTER JOIN tri_ClaimChg ON tri_IDENT.Pat_Id1 = tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID = tri_ClaimChg.PRS_ID AND tri_Ldg_Tran.Chg_TRN_ID = tri_ClaimChg.Chg_TRN_ID AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN tri_Payer ON tri_Ldg_Tran.Payer_ID = tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type = tri_Ldg_Tran.Pay_Type AND qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg') AND (tln_PaymentTypeMappings.PTMClientCode = 'SR') AND (tri_ClaimChg.Primary_Claim = 1) AND (tri_IDENT.Version = 0)
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2 Windows Server 2003 1GB Ram....(I know, I know)
TIA
Code Snippet GO CREATE TABLE [dbo].[Tokens]( [TokenID] [int] IDENTITY(1,1) NOT NULL, [Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED ( [TokenID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens] ( [Token] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] GO CREATE FUNCTION [dbo].[SplitTokenList] ( @TokenList varchar(max) ) RETURNS @ParsedList table ( Token varchar(255) ) AS BEGIN DECLARE @Token varchar(50), @Pos int SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ',' SET @Pos = CHARINDEX(',', @TokenList , 1) IF REPLACE(@TokenList , ',', '') <> '' BEGIN WHILE @Pos > 0 BEGIN SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1))) IF @Token <> '' BEGIN INSERT INTO @ParsedList (Token) VALUES (@Token) --Use Appropriate conversion END SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos) SET @Pos = CHARINDEX(',', @TokenList, 1) END END RETURN END GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList] @TokenList varchar(max) AS BEGIN SET NOCOUNT ON; create table #Tokens (TokenID int default 0, Token varchar(50)) create clustered index Tind on #T (Token) DECLARE @NewTokens table ( TokenID int default 0, Token varchar(50) )
--Split ID's into a table INSERT INTO #Tokens(Token) SELECT Token FROM SplitTokenList(@TokenList) BEGIN TRY BEGIN TRANSACTION --get ID's for any existing tokens UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0) FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token) OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old SELECT TokenID, Token FROM #Tokens WHERE TokenID <> 0 UNION SELECT TokenID, Token FROM @Tokens COMMIT TRANSACTION END TRY BEGIN CATCH DECLARE @er nvarchar(max) SET @er = ERROR_MESSAGE(); RAISERROR(@er, 14,1); ROLLBACK TRAN END CATCH; END GO
We already used Oracle Datasatage Server the following Query statement for Source and Lookup.here there is parameter maping in the SQl Statement . How can achive in SSIS the Folowing Querystatment?
Query 1: (source View Query) SELECT V_RDP_GOLD_PRICE.GDR_PRODUCT_ID, V_RDP_GOLD_PRICE.ASSET_TYPE, V_RDP_GOLD_PRICE.PREFERENCE_SEQ, V_RDP_GOLD_PRICE.RDP_PRICE_SOURCE, TO_CHAR(V_RDP_GOLD_PRICE.PRICE_DATE_TIME,'YYYY-MM-DD HH24:MI:SS'), TO_CHAR(V_RDP_GOLD_PRICE.REPORT_DATE,'YYYY-MM-DD HH24:MI:SS'), V_RDP_GOLD_PRICE.SOURCE_SYSTEM_ID FROM V_RDP_GOLD_PRICE V_RDP_GOLD_PRICE WHERE REPORT_DATE = (select max(report_date) from V_RDP_GOLD_PRICE where source_system_id = 'RM' )
Query 2: (look up )
SELECT GDR_PRODUCT_ID, TO_CHAR(MAX(PRICE_DATE_TIME),'YYYY-MM-DD HH24:MI:SS') , TO_CHAR(REPORT_DATE,'YYYY-MM-DD HH24:MI:SS') FROM V_RDP_GOLD_PRICE where GDR_PRODUCT_ID = :1 and report_date = TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') AND PRICE_DATE_TIME BETWEEN TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') - 7) AND TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') GROUP BY GDR_PRODUCT_ID, TO_CHAR(REPORT_DATE,'YYYY-MM-DD HH24:MI:SS')
please anyone give the sample control flow and how to pass the parameter?
I need to create a stored procedure that takes a list of product numbers(541, 456, CE6050,...) and selects only the customers that have all product numbers in the list. I have a product table that has the following schema:
So a customer can have more than one product, but I need a select statement that takes the product numbers and selects them against the product table and returns only the customerNumbers that have the entire list of product numbers. I have tried doing a join on the product list and productNumber, then join with the customer table on customerNumber, but that gets any entires found in the list not the entries that have all the product numbers. Thanks in advance for any help.
Hi, I am a newbie, this is my first post (please go easy).
Iam at the moment trying to set up a query for someone looking for a property on an estate agents website.
From a drop down menu, the user can: select an area (where they may like to live) from a list of areas. select an amount of bedrooms from a list of bedrooms select a minimum price from a list of prices select a maximum price from a list of prices.
The query I worked out for this is as follows: $data = mysql_query("SELECT * FROM property WHERE area like '$area' and bedrooms like '$bedrooms' AND price BETWEEN '$min_price' AND '$max_price'") or die(mysql_error());
This seems to work fine and shows all the properties that meet the criteria onto my webpage.
However, I then thought, someone may not care which area they live in and want to see all properties in all the areas, so I decided to add the option 'All areas' to my 'areas' list, I then did the same for the other lists, eg 'all bedrooms' option to my bedrooms list and so on.
I am now trying to write a query that incorporates where the 'all..' option is selected and have become very stuck! Can someone set me off in the right direction for this. I hope that makes sense?!?!
I am trying to insert into a database Checkbox list items, I get good values up till the checkBox List and then it gives me all O's, My fields in my database are bit columns so I need the checkbox list itmes to be converted to this format. This is what i have so far. One thing is I don;t think I am inserting into the correct database columns. bitLOD, bitInjury, bitIllness, bitreferral are the database fileds.Private Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click 'Check for the page ID to make sure not an update page then either insert new data or update existing data. Dim id As String Dim LOD As Byte Dim Injury As Byte Dim Illness As Byte Dim Referral As Byte id = Trim(Request.QueryString("ID"))For Each LItems As ListItem In CheckBoxList1.Items If LItems.Selected = True ThenSelect Case LItems.ValueCase "1" LOD = 1Case "2" Injury = 1Case "3" Illness = 1Case "4" Referral = 1 End Select End If Next 'Put data into the Database If id = "" Then 'save data into the database sql = "INSERT tblSADHealth (intTaskForceID, intUICID, strSSN, dtInjury, strNotes, LOD, Injury, Illness, Referral,) " _ & "VALUES (" & ddlTaskForce.SelectedValue & ", " & DDLUIC.SelectedValue & ", '" & txtSSN.Text & "', '" & txtStatus.Text & "', " _ & "'" & txtDate.Text & "','" & txtNotes.Text & "', " & LOD & ", " & Injury & ", " & Illness & ", " & Referral & ")" Response.Write(sql) Response.End()
In a multi-user environment, I would like to get a list of Idsgenerated, similar to:declare @LastId intselect @LastId = Max(Id) From TableManiaINSERT INTO TableMania (ColumnA, ColumnB)SELECT ColumnA, ColumnB From OtherTable Where ColumnC > 15--get entries just addedSELECT * FROM TableMania WHERE Id > @LastIdThe above works fine, except I'm assuming it will not work in amulti-user environment. Is there any way to get the set of Ids thatwere just added in the previous statement (similar to @@IDENTITY)without doing all of this in a serializable transaction or making atemp table of every single Id before the insert statement?
I frequently have the problem where I have a list of items to delete ina temp table, such asProjectId Description------------- ----------------1 test12 test43 test34 test2And I want to delete all those items from another table.. What is thebest way to do that? If I use two IN clauses it will do it where itmatches anything in both, not the exact combination of the two. I can'tdo joins in a delete clause like an update, so how is this typicallyhandled?The only way I can see so far to get around it is to concatenate thecolumns like CAST(ProjectId as varchar) + '-' + Description and do anIN clause on that which is pretty nasty.Any better way?
What are the options to create a table of contents based on the report items in a List Control? Document Mapping works for online viewing. A table of content would make the report easier to read when it's printed.
I want to get the list of items present in that order based on the confidentiality code of that product or Item and confidentiality code of the user.
I display the list of orders in first grid, by selecting the order in first grid I display the Items present in that order based on the confidentiality code of that item.
whenever order in 1st grid is selected i want to display the items that the item code should be less than or equal to the confidentiality code of the logged-in user other items should not display.
If the all the items present in the order having confidentiality code greater than Logged-in user at that time the order no# should not display in the first grid.
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you can not select null in multivalue parameter.How can i do it. i am using share point list.
Does anyone know if this is possible right out of the box in SSRS 2005 against an OLAP data source?
I have several parameters. My second parameter is to be filtered based on the first parameter (kinda like cascading), but how do I do this against an OLAP data source? Lets say I have param1 and param2 in a dataset. I want Param2 to show the locations only based on what I select in Param1. Same but a little different: I have Parameter1 and then my second parameter (Param2) is a boolean (True/False). I want to show Parameter 3/Paramater 4 based on selection of Param2 (So, if true, show Param3, if false, show Param 4) and remember we are doing this in a sequence. Can you do this thru SSRS? Any help would be great. Thanks for your time in advance. Kent
Is it possible to fill a parameter list with values based on another parameter value? Here's what I have so far (which hasn't worked)... I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school. I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table). I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school. Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up... The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'. The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid. ...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter? Any help you can give me would be great!! Thank you
I have 3 specific where searches in where command I want to add a defined text to each specific where query if that makes sense. highlighted in red, how do I do this? going to add status after and then do pivot table afterwards.
We're using MS Access 2010 as a frontend to an SQL server back-end. From Access, I can run read-only queries and pass-through queries. I'd like to use a local Access table as part of a join to server data. As a non-pass-through query, it's slow; about 5 min to join to 2 other tables.
I could use VBA to turn the local table into part of a pass-through query, with a large in() statement, or several where x='' ors but the local table may have 50000 entries in it. Is there a good or right way to pass this data in the query if I don't have write access to the server?
hii I have a problem in when i pass xml as input to stored procedure. The problem i m facing is that : Say i have a table which has id as primary key in it.Now in my sp i want to delete some rows from that table and in xml i am passin more than 1 id ( it can be four even). But before deleteion i want to check that delete the with that ID iff the ID exists else raise error for the id w/c does not exist like 'This Id does not exist.' what i want is to loop between the id's which are being passed as i/p to sp.. and delete the row if it exists elso diaplsy message this id does not exist.. somewhat like this
If Exists(Select ProfileName From Area52 Where Area52ID in
I am trying to pass a comma delimited llist of names to a stored procedure. I am getting a syntax error and I can't seem to figure out why. When i plug the names by hand into my select statement in query analyzer it all works fine. Just a little background so i don't have to put all the code in... the list of name is built dynamically. Below are all the code snippets. Thanks for your help in advance. The is the list of names and the call to the stored procedure:
SELECT ww.ORACLE_USER_NAME, ww.LAST_NAME + ', ' + ww.FIRST_NAME as employeeName, ww1.DIVISION + ' - ' + ww1.COST_CENTER + ' - ' + ww1.COST_CENTER_DESC as department FROM WHOS_WHO.dbo.HR_PEOPLE_V ww LEFT JOIN WHOS_WHO.dbo.HR_DEPARTMENTS_V ww1 ON ww.DEPARTMENT_ID = ww1.ORG_ID WHERE ww.SEARCHABLE = 1 AND ww.ORACLE_USER_NAME IS NOT NULL AND ww.PERSON_TYPE = 'Employee' AND (ww.ORACLE_USER_NAME IN (@EMPLOYEE_LIST) OR ww.DEPARTMENT_ID IN (SELECT ud.department_id FROM USER_DEPARTMENT ud WHERE ud.nt_id = @CURRENT_USER)) ORDER BY ww.LAST_NAME, ww.FIRST_NAME
I have created a ssrs report which connects to vertica database through odbc connection. When I try to pass parameter value through parameter (e.g.: column name IN (@parameter) ) then getting error message in query designer prompting "Error in list of values in IN clause. Unable to parse query text. ". Using sql server 2012 , visual studio 2010 version and HP Vertica 7.1 .
I'm trying to pass a comma delimited list of numbers to a parameter to use in an IN of my Where clause. Dim MySqlParamSelected As New SqlParameter("@Selected", SqlDbType.Int) Cmd.Parameters.Add(MySqlParamSelected) MySqlParamSelected.Value = Session("intSelected") WHERE tblSelected.Selected_ID IN (@Selected) It will work if I only pass it one number (e.g. 78), but when I pass it more than one (e.g. 78,79) it fails. Here is the error: Msg 119, Level 15, State 1, Line 4Must pass parameter number 7 and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'. Does anyone know how I can correctly pass multiple numbers to use in my IN?
How do i pass a parameter to a stored proc using this command: object SqlHelper.ExecuteScalar (SqlConnection connection, string spName, params object[] parameterValues) let's say that my parameter name is @ID and the value is IDval ..
HiWe still use SqlServer 2000 and DTSs.My question is: Can I pass a parameter to a DTS and if yes then how ?We would like to plan our screen like this.The user will input a parameter on the screen/form and then the DTS willbe activated using the value inputed.We do have how to work around it if parameters can't be passed but itwould make things a lot easier and straightforward if we could.Thanks !David Greenberg
