May 15, 2008
An error has occurred during report processing.
Query execution failed for data set 'dataSet'.
Semantic query execution failed. Too many table names in the query. The maximum allowable is 256. Incorrect syntax near the keyword 'AS'. Incorrect syntax near the keyword 'AS'. Incorrect syntax near the keyword 'AS'. Incorrect syntax near the keyword 'AS'. Incorrect syntax near the keyword 'AS'. Incorrect syntax near the keyword 'AS'. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon. Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon.
View 1 Replies
View Related
Sep 29, 2007
I found this on http://msdn2.microsoft.com/en-us/library/86773566.aspx which i am hoping may be able to resolve my problem but I am not sure I actually understand it. Where it shows // Start a local transaction. transaction = connection.BeginTransaction("SampleTransaction");
is the "SampleTransaction" nothing more then just a name of the transaction that is being created through this code or is it actually pointing to something?I believe that I understand the rest. Oh and in case you have a better way of doing what I am needing here is the SQL Query that is pulling info for me to display on a pageSELECT p.product_ID, p.class_ID, p.category_ID, p.product_name, p.product_desc, p.product_image, p.product_dimension, p.product_o1, p.product_o2, p.product_o3, p.product_ac, p.product_ph, p.product_photo, pcl.class_name, pca.category_nameFROM products AS p INNER JOIN productClass AS pcl ON p.class_ID = pcl.class_ID INNER JOIN productCategories AS pca ON p.category_ID = pca.category_IDBasically I am using the transaction to perform multiple updates seeing as how I will need to update multiple tables. private static void ExecuteSqlTransaction(string connectionString){ using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); SqlCommand command = connection.CreateCommand(); SqlTransaction transaction; // Start a local transaction. transaction = connection.BeginTransaction("SampleTransaction"); // Must assign both transaction object and connection // to Command object for a pending local transaction command.Connection = connection; command.Transaction = transaction; try { command.CommandText = "Insert into Region (RegionID, RegionDescription) VALUES (100, 'Description')"; command.ExecuteNonQuery(); command.CommandText = "Insert into Region (RegionID, RegionDescription) VALUES (101, 'Description')"; command.ExecuteNonQuery(); // Attempt to commit the transaction. transaction.Commit(); Console.WriteLine("Both records are written to database."); } catch (Exception ex) { Console.WriteLine("Commit Exception Type: {0}", ex.GetType()); Console.WriteLine(" Message: {0}", ex.Message); // Attempt to roll back the transaction. try { transaction.Rollback(); } catch (Exception ex2) { // This catch block will handle any errors that may have occurred // on the server that would cause the rollback to fail, such as // a closed connection. Console.WriteLine("Rollback Exception Type: {0}", ex2.GetType()); Console.WriteLine(" Message: {0}", ex2.Message); } } }}
View 1 Replies
View Related
May 7, 2008
CREATE procedure r_routeGetCache1
@pLongest varchar(32),
@pLongestCls int,
@pDate datetime,
@pSrcInt varchar(7),
@pSrcIntGroup varchar(64),
@pSrcIntDom varchar(64),
@routeclass int=0 ,
@pCLI varchar(32)='',
@pOperatorGroup int = 0 ,
@isgrade int=0
as
begin
declare @pc varchar(2)
declare @dd int
declare @hh int
declare @mm int
set @pc=left(@pLongest,2)
set @dd=1+(@@datefirst+datepart(dw,@pDate)-2)%7
set @hh=(datepart(hh, @pDate)-0)
set @mm=datepart(mi, @pDate)
set nocount on
--- Azam
select top 1 @routeclass = routecls from r_interface
where [group] = @pSrcIntGroup
and state='I'
if @routeclass is null set @routeclass=0
--- End
--insert
CREATE TABLE #operator_selected (
[routecls] [int] NOT NULL ,
[oprId] [int] NOT NULL ,
[cls] [varchar] (1) NOT NULL ,
[pc] [varchar] (2) NOT NULL
)
insert into #operator_selected(routecls,oprid,cls,pc)
select x.routecls,x.oprid,x.cls,x.pc
from RoutingV3..r20_route_timecls x (nolock),
RoutingV3..r_TimeCls y with (nolock),
RoutingV3..r_interface tit with (nolock),
RoutingV3..r_timecode tco with (nolock),
RoutingV3..r_daycode dco with (nolock)
where x.routecls=0
and tit.id = x.oprid and tit.state = 'I'
and y.tintid =x.oprid and y.cls=x.cls
and y.dc=dco.id and y.tc=tco.id and y.sc=0
and @dd between dco.d1 and dco.d2
and ((24+@hh+isnull(tit.prefixcls,0))%24) * 100 + @mm between tco.h1
and tco.h2-1
and x.pc=@pc
CREATE TABLE #timecls_selected (
[routecls] [int] NOT NULL ,
[oprId] [int] NOT NULL ,
[pc] [varchar] (2) NOT NULL ,
[prefixcode] [varchar] (50) NOT NULL ,
cnt int,
clsA int,
clsP int,
clsO int,
clsW int,
[cls] [varchar] (1)
)
insert into
#timecls_selected(routecls,oprid,pc,prefixcode,cnt,clsA,clsP,clsO,clsW,cls)
select a.routecls, a.oprid, a.pc, max(a.prefixCode) prefixCode,
count(*) cnt,
sum(case when a.cls='A' then 1 else 0 end) clsA,
sum(case when a.cls='P' then 1 else 0 end) clsP,
sum(case when a.cls='O' then 1 else 0 end) clsO,
sum(case when a.cls='W' then 1 else 0 end) clsW, 'Z' cls
from RoutingV3..r20_route12 a(nolock), #operator_selected b
where a.routeCls=@routeclass --b.routeCls
and a.oprId=b.oprId and a.cls=b.cls
and a.pc=b.pc
and left(@pLongest,prefixLen)=a.prefixcode
--- Exclude Artificial
--and not (id<0 and parentId is not null and parentId>0)
group by a.routecls, a.oprid, a.pc
update #timecls_selected
set cls = (case when (clsW>0) and (cnt = clsW) then 'W'
when (clsO>0) and (cnt = clsO) then 'O'
when (clsP>0) and (cnt = clsP) then 'P'
when (clsA>0) and (cnt = clsA) then 'A'
else 'Z' end)
update #timecls_selected
set cls = (select max(a.cls) from RoutingV3..r20_route12 a (nolock)
where a.routecls=#timecls_selected.routecls
and a.oprid = #timecls_selected.oprId
and a.pc=#timecls_selected.pc
and a.prefixCode=#timecls_selected.prefixCode
and ((a.cls='A' and #timecls_selected.clsA<>0) or
(a.cls='P' and #timecls_selected.clsP<>0) or
(a.cls='O' and #timecls_selected.clsO<>0) or
(a.cls='W' and #timecls_selected.clsW<>0))
)
where cls = 'Z'
CREATE TABLE #route (
seqno int identity(10,10),
priority int,
[id] int,
isactive int,
reason int,
exception int,
exceptionCls int,
calcexception int,
ext int,
oprid int,
parentid int,
routecls int,
prefixcode varchar(50),
universe varchar(5),
domain varchar(5),
pdomain varchar(5),
[group] varchar(40),
interface varchar(40),
userinfo varchar(40),
hint varchar(100),
clsorg char(1),
cls char(1),
cost float,
flag int,
rating int,
access varchar(10),
redlist int ,quality float)
if @isgrade =0
begin
insert into #route(isactive,reason, exception, exceptionCls, calcexception,[id],parentid,routecls,oprid,prefixcode,clsorg,cls,cost,
priority,rating,flag,ext,quality)
select
case when x.oprid>0 then x.state
else case when quality=99 then 0 else x.state end
end isactive,
x.reason,
isnull(x.exception,0) exception,
--case when x.oprId>0 then isnull(x.exceptionCls,0) else (case when x.quality=99 then 0 else isnull(x.exceptionCls,0) end) end exceptionCls,
isnull(x.exceptionCls,0) exceptionCls,
case when (isnull(x.exception,0) = 0) then 0
when x.exception > 0 then cast((x.exception+0.5)*10 as int)
else case when x.Id>0 then cast((x.exception-0.5)*10 as int) else 0 end
end [calcException],
x.id, x.parentId, x.routeCls, x.oprId, x.prefixCode, x.clsOrg, x.cls,
x.cost, x.priority, rating, x.flag, x.ext,x.quality
from RoutingV3..r20_route12 x(nolock), #timecls_selected b
where x.routecls=b.routecls and x.oprid=b.oprid and x.pc=b.pc and
x.prefixcode=b.prefixcode and x.cls=b.cls
order by x.cost
end
else
begin
insert into #route(isactive,reason, exception, exceptionCls, calcexception,[id],parentid,routecls,oprid,prefixcode,clsorg,cls,cost,
priority,rating,flag,ext,quality)
select
case when x.oprid>0 then x.state
else case when quality=99 then 0 else x.state end
end isactive,
x.reason,
isnull(x.exception,0) exception,
--case when x.oprId>0 then isnull(x.exceptionCls,0) else (case when x.quality=99 then 0 else 10 end) end exceptionCls,
isnull(x.exceptionCls,0) exceptionCls,
case when (isnull(x.exception,0) = 0) then 0
when x.exception > 0 then cast((x.exception+0.5)*10 as int)
else case when x.Id>0 then cast((x.exception-0.5)*10 as int) else 0 end
end [calcException],
x.id, x.parentId, x.routeCls, x.oprId, x.prefixCode, x.clsOrg, x.cls,
x.cost, x.priority, rating, x.flag, x.ext,x.quality
from RoutingV3..r20_route12 x(nolock), #timecls_selected b
where x.routecls=b.routecls and x.oprid=b.oprid and x.pc=b.pc
and x.prefixcode=b.prefixcode and x.cls=b.cls
order by x.quality,x.cost
end
set nocount on
select top 5
'r20_route12' routeset,
x.seqno priority, x.id, x.isactive, x.reason, x.exception, x.exceptionCls, x.calcexception,
isnull(x.ext,0) ext,
x.routecls, x.prefixcode, y.universe, y.domain, y.pdomain,
y.[group], y.name interface, y.userinfo, y.hint, x.clsOrg, x.cls
timecls, x.cost, x.flag, x.rating,
'11111' access, 0 redlist,x.quality grade
into #topN
from #route x, RoutingV3..r_interface y with (nolock)
where x.isActive=1
and x.oprId=y.id
and @pLongest like x.prefixcode+'%'
and exceptionCls<>0
order by seqno+[calcException], x.cost
select
'r20_route12' routeset,
x.seqno priority, x.id, x.isactive, x.reason, x.exception, x.exceptionCls, x.calcexception,
isnull(x.ext,0) ext,
x.routecls, x.prefixcode, y.universe, y.domain, y.pdomain,
y.[group], y.name interface, y.userinfo, y.hint, x.clsOrg, x.cls
timecls, x.cost, x.flag, x.rating,
'11111' access, 0 redlist,x.quality grade
into #all
from #route x, RoutingV3..r_interface y with (nolock)
where x.oprId=y.id
and @pLongest like x.prefixcode+'%'
order by seqno+[calcException], x.cost
delete #all
from #topN a, #all b
where a.id = b.id
set nocount off
select * from #topN where isActive=1
union all
select * from #all where isActive=1
end
View 3 Replies
View Related
