Can The SQL 2005 Install Upgrade From SQL 2000 Handle Multiple Instances?
Aug 7, 2006Can the SQL 2005 install upgrade from SQL 2000 handle multiple instances?
View 1 Replies
ADVERTISEMENT
Upgrade From SQL 2000 To SQL 2005, Same Machine For Both Instances?
Sep 6, 2006I am trying to install SQL2K5 on my machine where I already have SQL2K installed.
The best I have managed to achieve is to get SQL2K5 EM looking at my SQL2K databases.
Do I need to uninstall SQL2K before installing SQL2K?
Depending on what combo of SQL I have installed my options on SQL2K install vary.
I am a bit lost at this point.
Anyone know a link to a good white paper type doc that guides me through an install on the same machine.
Thanks In Advance
MPM
MS SQL 2000, 2005 Multiple Instances Not Broadcasted To Other Subnets
Apr 4, 2007We currently have multiple instances of MS Sql 2000 and MS SQL 2005 installed on servers. When at other locations that uses different subnets only the default instance is available, published, broadcasted, selectable.
We have TCPIP and name pipes enabled for all instances. This seems to be a common problem for all locations.
In-place Upgrade Vs Fresh Install 2005 From 2000
Apr 21, 2008hello, what is the general consensus on installing SQL 2005. I usually run a backup of SQL 2000 dbs and then restore on SQL 2005 and change compatibility to 9.0. Is it the right way to upgrade? I'm only asking because I also did one db in-place to SQL 2005 and thought it went well until I browsed my system dbs. All of them are missing tables that usually appear in SQL 2005 system dbs. Other than that I haven't run into too many problems.
View 3 Replies View RelatedSetup And Upgrade :: Install New Instance On Server Where Existing Instances Are At Service Pack 3
Oct 7, 2015If I install a new named instance of SQL Server 2008 R2 on a machine that already has 3 named instances that are upgraded to service pack 3, will the install of the new instance overwrite any of the current SP3 files? Will I have to re-apply SP 3 to the existing instances?
View 4 Replies View RelatedSetup And Upgrade :: Run Multiple Instances On 2014?
Jun 5, 2015I've a SQL server 2014 setup on a server recently. Can I add a new(second) instance to the SQL server (already running one instance)?
View 6 Replies View RelatedInstall AS On Multiple SQL Server Instances?
May 12, 2002Dear Listers,
1.) Is it possible to install Analysis Services on multiple SQL Server 2000 instances? If it is, then can you instruct me as to how to perform the install. If it is not possible, then does one restrict access to cube data via the Database Role Manager?
ie. The host box is - DOILAB30 with Analysis Services & SP2
Instance - DOILAB30/DOILAB30_FIN (Can AS be installed here?)
Do I severely restrict the membership of OLAP Admins?
2). Re. AS maintenance. - How do I backup and restore OLAP dbs/cubes etc. Following a restore, what issues, such as cube users/permissions should I be aware of? (if any).
TIA
John
SQL 2012 :: How To Install Cluster On Multiple Instances
Mar 4, 2015We have 5 instances on our clients old machine with SQL 2005, now they want us to move on cluster environment with SQL 2012.
Once I have installed and configured SQL cluster with single instance, but how to install SQL Cluster environment for Multiple instances.
Should I install all the instances first and than have to configure cluster ?
OR
Is there any way that first I will install cluster and than we can add the instances ?
How To Install SS2005 On New Nodes In Existing Cluster For Multiple Instances ???
Oct 5, 2007Hi There
I have found no real documentation on this, so any links would be greatly appreciated.
We have an existing 2 node active active cluster.
A default and and named instance SS2005 Enterprise Edition are installed on the cluster.
Recently we acquired new hardware, 2 servers, which we added to the cluster so we now have a 4 node cluster.
The 2 new nodes have OS etc installed.
Now i have installed sql on a new multi node cluster, i have upgraded sql server in an existing cluster BUT i have never installed sql on an existing cluster for new nodes for multiple instances.
Now i presume you simply run the install on one of the new nodes, do this for a default instance, selecting both 2 new nodes to installl on. And do this again for the named instance.
But in the past I have never been promoted for which nodes to install sql on, it simply does all the nodes BUT i do not want this.
And how will the cluster know where the binary files are for each instance on the new nodes?
In a nutshell, how do i install sql server 2005 for 2 new nodes in an existing 4 node cluster for multiple instances ?
Thanx
Sql 2000 Enterprise And Sql 7- Multiple Instances
Jan 5, 2001I need to put sql server 2000 enterprise and sql server 7 on the same box. For multiple instancing is it better to run with Win 2k Pro Server or Advanced Server. Please Elaborate.
Thanks in advance
Gunnar
Install Muliti Instances On SQL 2005 Cluster With The Same Server Name
Mar 29, 2007
I am trying to install multi instances on my server cluster 2003 R2 Sp2. Because of the compatibility issues with my services I need to install both SQL 2000 and 2005. With 2000 I can easily specify the instance and servername. The server name can be the same, but the instance has to be different. Is this true for 2005? I have found so far that for every new instance that you create that you need to have a different virtual server name. How can you utilize the same virtual name and have multi insances
servername$instance1
servername$instance2
and so on
ThatGuy
SQL 2005 Multiple Instances 2.8 GB RAM
Dec 12, 2007Has anyone run SQL 2005 Standard Edition, 2 or more instances on one server... where you got the extended memory up to 2.8 GB on EACH instance of SQL Server? I've done the 2.8GB game on boxes with ONE instance, but don't think I tried it on a multi-instance box, to get the 2.8GB RAM each. Thanks, Bruce
View 2 Replies View RelatedSQL 2005, Multiple Instances - What About Ports?
Apr 18, 2006When multiple instances of SQL 2005 are installed on a cluster or standalone server, is it best to have each instance configured to listen on a different port or will one port for all do? We don't use port 1433 and the port we do use is blocked at the firewall. I'd like to standardize on one port for all instances but I'm not sure of the ramifications. Any thoughts?
Thanks.
SQL 2005 Upgrade Install Error
Feb 15, 2008I am trying to upgrade SQL 2000 SP3 to SQL 2005 SP2 on a Windows 2003 server with all the latest patches. The SQL 2005 install went through like it was supposed to but when it was nearly finished it gave the message:
" there was an unexpected failiure during the setup wizard. You may review the setup logs and/or click the help button for more info". I'm pretty new to Microsoft SQL so I looked at help and there was no information.
I've tried running setup again and keep getting the above error message. During the install the program says everthing is installed but I've noticed the Management Center is missing.
Sql 2000 And Sql 2005 Instances On The Same Box
Jan 16, 2008We have an x86 sql 2000 server with 4GB of RAM, a quadcore Xeon, a RAID 5 drive C, and its utilization is generally low. Typical perfmon counters: CPU < 5%; available Mbytes, 1800; typical disk time 5-10 %; Committed bytes in use < 25%, pagessec near 0.0.
For various reasons I need to install a sql 2005 instance on the same box and both instances will be up and running at the same time.
How, using Perfmon (?), can I determine the max amount of memory to assign to each instance? (It is my understanding that I definitiely need to limit the amount of RAM used by each instance.)
TIA,
Barkingdog
Can I Have 2000 And 2005 Instances On On Server
May 14, 2007Hi all
I have a server with SQL Server2000 databases in it..
Now i would like to install SQL Server 2005 on the same server with out disturbing SQL Server 2000 databases
I need to create a seperate instance for SQL Server 2005..
is it possible to have both the instances on the same server.
Thanks
Sql 2000 And Sql 2005 Instances On Same Cluster
Jan 17, 2008Hi
I have a cluster with 4 sql server 2000 instances and would like to upgrade 2 of these to sql server 2005 - is there any document or list of things to ensure I do
Thanks
Install Sql 2005 Instance With Reporting Service 2005 On Sql 2000 With RS 2000 Server
Aug 18, 2006Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
Installing / Running Multiple Instances Of SQL Server Express 2005
Jan 3, 2008My client has a server running MS 2003 Server for Smal Business Server, and it has SQL Server Express 2005 installed (I believe it is installed 3 times, as part of SharePoint, Veritas Backup Exec and ACT! applications).
I am trying to implement an application that uses SQL Server 2000, but the Server 2003 SBS does not support that version. So I need to launch an additional instance of SQL Server Exp 2005.
To do so, do I need to download and install SQL Server Express 2005 software again? Or can I just run SQLSVR.exe from an existing instance, but with a different instance name (sqlservr.exe -s<InstanceName>?
The reason I need another instance is that these existing instances limit DDL statements.
I am new to this and compare it to launching MS Word multiple times - you don't need to reinstall Word to run it multiple times.
Is launching from the command line a bad idea - and if it is, what is the better way to ensure that it launches under the local system context a service?
Thanks in advance for any help and insights. It is much appreciated.
Can SSRS 2005 Handle Stored Procedures Or SQL Subqueries That Rreturn Rowsets Based On Multiple SQL Updates?
Nov 8, 2006Hello,
I have a stored procedure that creates a temporary table, and then populates it using an INSERT and then a series of UPDATE statements. The procedure then returns the temporary table which will contain data in all of its columns.
When I call this procedure from SSRS 2005, the rowset returned contains data in only those columns that are populated by the INSERT statement. The columns that are set via the UPDATE statements are all empty. I read (in the Hitchhikers Guide to Reporting Services) that SSRS will only process the first rowset in a stored procedure that generates multiple rowsets. Is this true? Is this why SSRS does not retrieve data for the columns that are populated by the UPDATE statements?
Here is the stored procedure:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- File: sp_GetProgramsWatchedByDateRange.sql
-- Desc: Returns EDP program and related channel (i.e., provider) information from the IPTV Data warehouse.
-- Note that some of that data used by this procedure are obtained from the RMS_EPG database
-- which is created by an application (loadEPG) that loads the EPG data from a GLF format XML file.
-- Auth: H Hunsaker
-- Date: 11/07/2006
-- Example invocation
-- EXEC dbo.sp_GetProgramsWatchedByDateRange ...
-- Arguments/Parameters:
-- Parameter Name Type Description
-- 3. StartDate datetime First date of reporting period
-- 4. EndDate datetime Last date of reporting period
-- TerseMode bit Return all columns? (1 = no, 0 = yes)
-- 5. AsXML bit Resultset format (0 = standard, 1 = XML)
-- 6. Debug bit Debug mode (0 = off, 1 = on). Currently disabled
IF OBJECT_ID (N'dbo.sp_GetProgramsWatchedByDateRange') IS NOT NULL
DROP PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
GO
CREATE PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
@StartDate datetime = NULL,
@EndDate datetime = NULL,
@TerseMode bit = 0,
@AsXML bit = 0,
@Debug bit = 0
AS
-- Notes: Much of the program content (roles, flags, etc.) that we want is not stored in the IPTV data warehouse.
-- So I am going to the RMS_EPG database to obtain that information.
-- We will have to ensure that the 2 databases are generated at the same or a matching time
-- in order to to ensure that all programID values in the data warehouse can be located in the RMS_EPG database.
-- Debug code for testing
-- DECLARE @StartDate datetime
-- DECLARE @EndDate datetime
-- DECLARE @TerseMode bit
--SET @StartDate = NULL
--SET @EndDate = NULL
--SET @TerseMode = 1
SET NOCOUNT ON
CREATE TABLE #programWatched
(
--IPTV device ID
tdeviceId uniqueidentifier NULL,
taccountId uniqueidentifier NULL,
-- Basic program information
tprogram int NULL, -- programID from EPG XML, needed to access program data in the RMS_EPG db.
tprogramId uniqueidentifier NULL, -- programID generated by IPTV
tprogramTitle varchar(150) NULL,
tprogramEpisodeTitle varchar(100) NULL,
tprogramDescription varchar(500) NULL,
toriginDateTime datetime NULL,
tduration bigint NULL,
tprogramType nvarchar(100) NULL,
tchannelCallName nvarchar(20) NULL,
--Rating
programMPAARating varchar(50) NULL,
programVCHIPRating varchar(50) NULL,
programMPAARatingVal smallint NULL,
programVChipRatingVal smallint NULL,
-- Categories
programGenre varchar(50) NULL,
programCategory1 varchar(50) NULL,
programCategory2 varchar(50) NULL,
programCategory3 varchar(50) NULL,
programCategory4 varchar(50) NULL,
-- Roles
programActor1FirstName varchar(50) NULL,
programActor1LastName varchar(50) NULL,
programActor1 varchar(100) NULL,
programActor2FirstName varchar(50) NULL,
programActor2LastName varchar(50) NULL,
programActor2 varchar(100) NULL,
programActor3FirstName varchar(50) NULL,
programActor3LastName varchar(50) NULL,
programActor3 varchar(100) NULL,
programActor4FirstName varchar(50) NULL,
programActor4LastName varchar(50) NULL,
programActor4 varchar(100) NULL,
programActor5FirstName varchar(50) NULL,
programActor5LastName varchar(50) NULL,
programActor5 varchar(100) NULL,
programActor6FirstName varchar(50) NULL,
programActor6LastName varchar(50) NULL,
programActor6 varchar(100) NULL,
programActor7FirstName varchar(50) NULL,
programActor7LastName varchar(50) NULL,
programActor7 varchar(100) NULL,
programActor8FirstName varchar(50) NULL,
programActor8LastName varchar(50) NULL,
programActor8 varchar(100) NULL,
programDirectorFirstName varchar(50) NULL,
programDirectorLastName varchar(50) NULL,
programDirector varchar(100) NULL,
programWriterFirstName varchar(50) NULL,
programWriterLastName varchar(50) NULL,
programWriter varchar(100) NULL,
programProducerFirstName varchar(50) NULL,
programProducerLastName varchar(50) NULL,
programProducer varchar(100) NULL,
-- Flags
ClosedCaption bit NULL,
InStereo bit NULL,
Repeats bit NULL,
New bit NULL,
Live bit NULL,
Taped bit NULL,
Subtitled bit NULL,
SAP bit NULL,
ThreeD bit NULL,
Letterbox bit NULL,
HDTV bit NULL,
Dolby bit NULL,
DVS bit NULL,
FlagOrdinalValue smallint NULL,
-- Channel
tchannelId int NULL,
callLetters varchar(20) NULL,
displayName varchar(50) NULL,
type varchar(50) NULL,
networkAffiliation varchar(50) NULL
)
-- I store the program watching data in a temp table because
-- data from the VIL and the Sandbox that were used to test this procedure were either incomplete or invalid.
-- Use of a temp table with a series of updates allow me more control over the result set.
IF @StartDate IS NOT NULL AND @EndDate IS NOT NULL
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
AND originTime BETWEEN @StartDate AND @EndDate
ELSE
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
-- AccountId/SubscriberId
UPDATE #programWatched
SET taccountId = (SELECT accountId
FROM DW_BRDB_bm_device d
WHERE d.deviceId = tdeviceId)
-- program (this is the integer program ID stored in the EPG XML, not to be confused with the IPTV programId)
-- a program can occur on multiple channels, so we filter channels where scheduleTime <= originTime <= scheculeTime + durationSecs
UPDATE #programWatched
SET tchannelCallName = (SELECT TOP 1 channelCallName
FROM DW_EPG EPG
WHERE tprogramId = EPG.programId AND toriginDateTime BETWEEN scheduleTime AND DATEADD(s, epg.durationSecs, epg.scheduleTime))
UPDATE #programWatched
SET tprogram = (SELECT TOP 1 program FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramTitle = (SELECT TOP 1 programTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramEpisodeTitle = (SELECT TOP 1 programEpisodeTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramType = (SELECT TOP 1 programType FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName)
-- Rating (otained from programValues, can also be obtained from programFlags)
UPDATE #programWatched
SET programMPAARating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 9)
UPDATE #programWatched
SET programMPAARatingVal = CASE programMPAARating
WHEN 'G' THEN 10
WHEN 'PG' THEN 25
WHEN 'PG-13' THEN 30
WHEN 'R' THEN 35
WHEN 'NC-17' THEN 50
WHEN 'NRAO' THEN 60
WHEN 'NR' THEN 0
ELSE 0
END
UPDATE #programWatched
SET programVChipRating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 8)
UPDATE #programWatched
SET programVChipRatingVal = CASE programVChipRating
WHEN 'TV-Y' THEN 10
WHEN 'TV-Y7' THEN 20
WHEN 'TV-G' THEN 35
WHEN 'TV-PG' THEN 40
WHEN 'TV-14' THEN 45
WHEN 'TV-MA' THEN 60
ELSE 0
END
-- Genre
UPDATE #programWatched
SET programGenre = (SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType psct ON psct.programSubCategoryTypeId = pc.programCategoryId
INNER JOIN RMS_EPG..programCategoryType pct ON pct.programCategoryTypeId = psct.programCategoryTypeId
WHERE tprogram = pc.programID)
-- Categories
UPDATE #programWatched
SET programCategory1 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID)
UPDATE #programWatched
SET programCategory2 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1))
UPDATE #programWatched
SET programCategory3 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2))
UPDATE #programWatched
SET programCategory4 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2, programCategory3))
-- Roles
UPDATE #programWatched
SET programDirectorFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirectorLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirector = programDirectorLastName + ' , ' + programDirectorFirstName
UPDATE #programWatched
SET programWriterFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriterLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriter = programWriterLastName + ' , ' + programWriterFirstName
UPDATE #programWatched
SET programProducerFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducerLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducer = programProducerLastName + ' , ' + programProducerFirstName
UPDATE #programWatched
SET programActor1FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1 = programActor1LastName + ' , ' + programActor1FirstName
UPDATE #programWatched
SET programActor2FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2 = programActor2LastName + ' , ' + programActor2FirstName
UPDATE #programWatched
SET programActor3FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleLastName NOT IN (programActor2LastName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3 = programActor3LastName + ' , ' + programActor3FirstName
UPDATE #programWatched
SET programActor4FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4 = programActor4LastName + ' , ' + programActor4FirstName
UPDATE #programWatched
SET programActor5FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5 = programActor5LastName + ' , ' + programActor5FirstName
UPDATE #programWatched
SET programActor6FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6 = programActor6LastName + ' , ' + programActor6FirstName
UPDATE #programWatched
SET programActor7FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7 = programActor7LastName + ' , ' + programActor7FirstName
UPDATE #programWatched
SET programActor8FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8 = programActor8LastName + ' , ' + programActor8FirstName
-- Channel (provider) Call Letters, Display Name and Type
-- Is this correct? Should we get the channelId from the schedule table?
-- Is this efficient? View execution plan
UPDATE #programWatched
SET tchannelId = (SELECT TOP 1 c.channelId
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram)
UPDATE #programWatched
SET callLetters = (SELECT TOP 1 c.channelCallLetters
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET displayName = (SELECT TOP 1 c.channelDisplayName
FROM RMS_EPG..channel c
JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET type = (SELECT TOP 1 c.channelType
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET networkAffiliation = (SELECT TOP 1 c.channelNetworkAffiliation
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
IF @TerseMode = 0
SELECT *
FROM #programWatched
ORDER BY toriginDateTime
ELSE
-- Get only Genre, title, show date/time, rating, call letters
SELECT tDeviceId, tprogramTitle, tprogramEpisodeTitle, programGenre, toriginDateTime, programMPAARating, programVCHIPRating, tchannelCallName
FROM #programWatched
ORDER BY toriginDateTime
DROP TABLE #programWatched
SET NOCOUNT OFF
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I also tried a query that populates some of its columns via subqueries. The query works fine when executed by the SQL Sevrer Query Analyzer,
meaning that all columns contain values, but when executed from SSRS, the columns that are poulated by the subqueries are empty, and only the columns that are not set by subqueries contain values:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SELECT PW.DeviceID,
PW.originTime AS 'When Watched',
PW.programID,
PW.Duration AS 'Duration Seconds',
(SELECT TOP 1 programTitle FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime
AND DATEADD(second, durationSecs, DW_EPG.scheduleTime)) AS Title,
(SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime AND
DATEADD(second, durationSecs, DW_EPG.scheduleTime)) As program,
(SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN
DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Genre,
(SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime
BETWEEN DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Category
FROM DW_EventClientProgramWatched PW
ORDER BY DeviceId, programId, originTime
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any help is appreciated
Named Instances And Default Instances Of SQL Server 2000
Jul 18, 2001I had a server with SQL Server 7.0
I installed a named instance of SQL Server 2000 and then i passed all my DB
of the 7.0 instance to the 2000 instance.
Then i removed the 7.0 instance, that was the default instance.
So at the moment there is only the 2000 version, but it isn't the default
instance
Can the 2000 instance become the default instance? (So that clients can
connect to it simply through computer name, and not creating an alias)
thanks
Fede
Trouble Enumerating SQL Server Instances With SQL 2000/2005 On Network
Dec 4, 2007
Hi,
We have (after several weeks of testing in all kind of environments) send out a new version of our application to several of our customers. Within days problems where drippin in; After looking for the problem on various customer situations we found a problem which I think is rather disturbing and very odd. I'll describe the situation, on which we finally managed to recreate the problem, here.
In my problem I use the following configuration:
Windows 2003 (standard edition) AD network with 2 domain controllers, multiple Windows XP workstations, some without SQL instances, some with SQL 2000 instances, some with SQL 2005 instances and even one with SQL 7 running.
All run a 32 bit OS.
Tools to reproduce:
ListSQLSvr application (found on SQLDev.net) to enumerate the instances.
Problem description:
--------------------------------------------------
I am running the machine called DEV001, which has SQL 2000 (instancename DRUMIS) and SQL 7.0 (has no instancename so this is the root instance) installed.
In any 'normal' situation all the runnings SQL instances are visible on the network like this:
Code Block
C:>listsqlsvr -X
(local);Clustered:No;Version:7.00.623
ADM002DRUMIS;Clustered:No;Version:8.00.194
DEV001DRUMIS
DEV001DRUMIS;Clustered:No;Version:8.00.194
DEV002DRUMIS;Clustered:No;Version:8.00.194
DEV002EXPRESS;Clustered:No;Version:9.00.3042.00
DEV002EXPRESS
INSADBACKOFFICEDRUMIS;Clustered:No;Version:8.00.194
INSADBACKOFFICEEXACT;Clustered:No;Version:9.00.3042.00
INSADOFFICEWSUS;Clustered:No;Version:8.00.194
SUP001DRUMIS;Clustered:No;Version:8.00.194
When I turn the SQL 2005 Browser service off on the machine called DEV002 the list looks like:
Code Block
C:>listsqlsvr -X
(local);Clustered:No;Version:7.00.623
ADM002DRUMIS;Clustered:No;Version:8.00.194
DEV001DRUMIS;Clustered:No;Version:8.00.194
DEV001DRUMIS
DEV002
DEV002EXPRESS
DEV004DRUMIS;Clustered:No;Version:9.00.3042.00
INSADBACKOFFICEDRUMIS;Clustered:No;Version:8.00.194
INSADBACKOFFICEEXACT;Clustered:No;Version:9.00.3042.00
INSADOFFICEWSUS;Clustered:No;Version:8.00.194
SUP001DRUMIS;Clustered:No;Version:8.00.194
Notice that the browser service might be off on DEV002, you can still see the EXPRESS instance and a new root instance has appeared (though it doesn't exist!)??
After restarting the Browser service all is OK again.
When I turn on Hide Server in the SQL 2000 TCP/IP properties (or turn it on in the registry [HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerDRUMISMSSQLServerSuperSocketNetLibTcp] "TcpHideFlag"=dword:00000001) on the DEV002 computer something real scary is happening..
The list looks as follows:
Code Block
C:listsqlsvr -X
(local)
ADM002
DEV001
DEV002
DEV004
INSADBACKOFFICE
INSADOFFICE
SUP001
When someone has entered a database (for example the backoffice database on INSADBACKOFFICEEXACT) the list looks as follows (for a short moment; 5 secs or so):
Code Block
C:listsqlsvr -X
(local)
ADM002
DEV001
DEV002
DEV004
INSADBACKOFFICEDEVELOP;Clustered:No;Version:8.00.194
INSADBACKOFFICEDRUMIS;Clustered:No;Version:8.00.194
INSADBACKOFFICEEXACT;Clustered:No;Version:9.00.3042.00
INSADOFFICE
SUP001
Notice now that ALL instances are gone and no extended information is available. In the Query Analyser and in the SQL Management Studio when browsing you'll see this as well!
When someone is accessing a database instance it appears for a few seconds again.
Since our installation and applications rely on selecting a existing instance it will fail in the above situations (or at least not showing all available instances).
In my opinion this is a bug somewhere!
Note that even when the SQL Services are stopped on DEV002 (leaving the Browser service running) it still seems to block out ALL instance on the ENTIRE network!
I don't mind that one INSTANCE or even the entire MACHINE is hidden from the network, but ALL instances on ALL machines??
And the SQL Browser issue also worries me a bit since it does not stop the possibily to browse the SQL instances; it removes the SQL2000 instances but adds a root instance which doesn't even exist! Also the extended info is stripped.
Can anyone help me solve this/advise?
Also mind that in any situation there might run a lot of computers with a lot of SQL instances and I cannot tell our customers to find which machine has the SQL TCP/IP properties set to Hide...
It even seems that in some situations SBS 2003 does the hiding automatically on Install? And if so, when and why?
Regards,
Albert van Peppen
Senior System Engineer
Insad Grafisch b.v.
Best Way To Upgrade SQL 2000 To 2005
Dec 11, 2007Hello,
I have a project where I have to upgrade SQL 2000 to 2005. When we are upgrading we are going to move to new server so server name will change. Most of our applications have a hard coded connection string. Applications are developed with Classic ASP, .NET 1.1 and 2.0 as well.
Now the question is what is the best way to do this? Changing all the connection string will be a very painful task as we have many applications.
Can anyone suggest a way where we can achieve this without changing all the connection strings?
Thanks in advance.
Tareq
Upgrade From 2000 To 2005
Oct 24, 2007what are some of the issues that we might face while upgrading from SQl 2000 to SQl 2005? Actually I have to create upgrade plan for path from MS 2000 to MS 2005.
Any suggestions will be appreciated.
Thanks
How Do I Upgrade From SQL 2000 TO 2005?
Nov 27, 2007Hi,
I was wondering if anyone could point me in the right direction for upgrading from SQL 2000 to SQL 2005?
I was under the impression that it was as easy as following an upgrade path after popping in the CD, but I realized it's not.
I'm a Systems Administrator who has installed both version in stand alone systems, but never tried an upgrade.
Thanks for your help.
Upgrade From Sql 2000 To 2005
Feb 4, 2008Hello,
I would like to upgrade sql server 2000 to sql 2005. So Can I install the sql server 2005 on the same server where sql 2000 is already running and then use the database upgrade wizard. Or should I install the sql server 2005 on a different server.
Thanks
Sql 2000 To Sql 2005 Upgrade
Aug 9, 2006I have a sql 2000/2005 side-by-side install on a single server. I right-click a sql 2000 database, select All Tasks, and the Copy Database to upgrade a sql 2000 database. In the "Copy Database Wizard" I see the message:
"To use the detach and attach method SQL Server Agent must run under an Integration Servicers Proxy account that can access the file system of both the source and destination servers."
1. What does that mean?
2. I decided to click "Finish" in the wizard, and the database copy seemed to work fine. Whaterver 1) means does, by default, the SQL Server Agent already run under this "Integration Services Proxy" account. (Rememberr the upgrade process did work).
TIA,
barkingdong
Upgrade SQL 2000 To SQL 2005
Jul 17, 2007Hey Guys,
Looking for some type of solution on this issue. I'm going from SQL2000 to SQL2005 and I run the upgrade advisory tool and all and I'm going through the procedures of getting our SQL server updated to SQL2005, when I attempt to run that analyzer to take a look at how well the migration will go. I get a timed out error message on the fallowing.
ORDERBYORDINALS
FTCATPROPITEMCOUNT
OLDSYSTEMTABLES
DROPSYSOBJ
HOSTIDRETURN
FTPROPS
QRYGOVCOSTLIMIT
FTCATALOGNAMERESTRICTION
SPCONFIGURE
INVALIDCHAR
OPENXMLWITH
XPAGENTPROXY
UPDATETEXT
SPHELPTRIGGERNEWCOL
DISKINIT
SYSPERFINFO
DEPRECATEDSP
OLDDBCC
ORDERBYALIAS
Exact error message and its always the same for each entry.
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding"
Any help in this are would be greatly appreciated, all other issues have been resolved I'm just stuck on this and I don't want to upgrade until the advisory tool gives me the ok to.....
Thanks in advance.
Looking For SQL 2000 To SQL 2005 Upgrade
Oct 5, 2006All,
I am looking for upgrading SQL 2000 databases to SQL 2005.Has anybody got a detailed plan /Documents for doing so?.
Thanks and Regards
Avijit Macker
Upgrade SQL 2000 SBS To SQL 2005 64 Bit
Sep 23, 2006I am in the beginning of upgrading a SQL 2000 DB on a Small business server to a 64 bit 2005 DB on a new box. Is my best method of upgrading to use the "copy" DB function in 2005? If so, what do I need to do to install the management tools on the 2000 box - since this is a 32 bit edition, and I have the 64 bit media?
View 1 Replies View RelatedSQL 2000 To SQL 2005 Upgrade
Mar 7, 2008
I got a requirement to upgrade only One SQL 2000 to SQL 2005 server. i did check that there are only databases in this server along with Linked server. I am looking for a best practice document for SQL upgrade and any thoughts or experience any one has faced during upgrade.
Other question is what about if there is a DTS on the server. right now on this particular server there is no DTS but in coming weeks i may need to upgrade other server which is having DTS as well. I have worked alot on SSIS packages but want to see if DTS will be converted to SSIS packages or i will have to manually do it.
Thanks
SQL Upgrade From 2000 To 2005
Apr 2, 2008Hi,
We have 2 .net 1.1 applications using Microsoft SQL Server 2000 Enterprise Edition. To connect to database we are using nHibernate 0.6 for one application and Microsoft Enterprise Library Data Blocks Ver 1.0 in another.
We are planning to upgrade SQL servers of both applications to SQL 2005 Enterprise edition and retain .net 1.1 framework. Are nHibernate 0.6 and Microsoft Enterprise Library 1.0 data blocks compatible with the SQL 2005? Are any upgrades required for these as well?
We ran SQL upgrade advisor report on these applications, there weren't any changes to table/ stored procs suggested. Could that mean that the existing table design and stored procs are compatible with SQL 2005?
Thanks in Advance,
Abhijith Bharadwaj
How To Upgrade DTS From 2000 To 2005
Mar 9, 2008
Hi all,
I just ran sql upgrade advisor and got the following message:
"You can use SQL Server 2005 tools to edit your existing DTS packages. However, upgrading or
uninstalling the last instance of SQL Server 2000 on a computer removes the components required
to support this feature. You can retain or restore these components by installing the special
Web download, €œSQL Server 2000 DTS Designer Components,€? from the Microsoft Download Center
before or after you upgrade or uninstall SQL Server 2000."
I do have several DTS packages in my sql server 2000 database. does that mean if I upgrade my current 2000 database to 2005, those dts will be gone. But I can download sql server 2000 dts deginer components on our new sql 2005 database server before I upgrade. Then when I restore my sql 2000 database on our new 2005 server, eveything would be OK? I am not sure if my understanding is correct.
My advisor is on my local computer and I am running analysis against a remote database(on our intranet),€œSQL Server 2000 DTS Designer Components,€? should be intalled on my local computer or remote database server? what steps I should take in order to retain my dts package or transform it into something else?
can you shed light on me?
Thanks.
Betty