Not sure if this is possible, I have a requirement, when email comes into our MS outlook Inbox, we need to identify the email based on the From email address and read the data which is in the body of the email. I do'nt know if we can do something like that using SQL 2005, any ideas?? Thanks!!
View 1 RepliesI have a Reporting Services 2005 report that is emailed to users. I created/formatted the report based on how it looked in Outlook 2003 which all of our users had at that time. The report is wide, but just fit in the email window when it was full size. Now I have a user who has been converted to Outlook 2007 and he emailed me a copy of the report he received in Outlook 2007 and it looks like it reduced the column sizes; it does not fill the entire email window and wraps the wording on most lines because the column sizes have been reduced.
The report is:
Delivered by: Report Server E-mail
Include Report is checked
Render Format is Web archive
Any ideas on how I can fix this?
Thanks in advance.
I have a report that is sent via email to a list of recipients. When I look at the subscription in 'My Subscriptions' the value in the Status column states that the message was 'sent successfully', however the email does not appear in the inboxes of any of the intended recipents. The report renders OK via the browser and only takes a few seconds to process. The subscription exports the report as an Excel file. The excel file is approx 8MB in size but this is still below the attachment size limit for internal emails within my organisation. The subscription is tied to a shared schedule. Other reports that are tied to the shared schedule are shown as successful in 'My Subscriptions' and also appear in the inboxes of recipients. All email address are correct.
I forgot to mention, the report was successfully received by all recipients until very recently and the report has not been modified since this time.
Has anyone come across this problem before.
Thanks
Mike
Hi, looking for some help on job notification emails in SQL 2005.
I've created a backup job in the Maintenance Plan section of SQL2005, and added a "Notify Operator" task to notify me when the job completes.
I've setup Database Mail, and I am getting the notification email whenever I run the job. So this is working fine.
The problem is when I got to the 'Jobs' folder, and into the properties of my backup job, I set it up to notify me from the notifications option, but I am not getting any emails. For now I have set it to notify me when the job "succeeds".
Any ideas why it works from the Maintenance Plan section, but not the "Jobs" notification section? Am I forgetting something?
I have recently migrated a SQL2000 instance to SQL2005, and would now like to setup all the existing jobs to notify me if they fail.
Any advice would be helpful
Thanks
i attached adventure works in sql server 2008 and it showing as read only ,make it read write or remove read only tag from database.
View 11 Replies View RelatedHi
I am using asp.net framwork 2 with sql 2005 express edition. Can anyone please provide me any sample of sending automated emails (like welcoming people when they register to my website, or if their personal details have been updated....). or any e-book/website ref will do. I am not very expert in sql/db and smtp (or other email) stuffs. So please help me.
With thanks
How would I go about checking incoming e-mails? For example, on a certain e-mail address, I would get e-mails formatted in a certain way. According to the response, some scripts need to run/ some sql tables updates etc. How can one do this in (ASP) .NET with SQL Server? Anyone did this kind of stuff before?
View 3 Replies View RelatedI'm new to programming and to databases so apologies if this sounds like a stupid question.
I have a html page with a simple javascript function that uses the href mailto tag to send an email to a normal email address. I was wondering if it would be posssible to send the email directly to an SQL Server database, without having to pass through an intermediate parsing app. It would mean assigning an email address to the database. Is this possible with SQL Server? I know there would still be problems with parsing the email content to the appropriate fields, but would the sending of the email to the database in itself be possible?
I haven't much experience using databases and I don't currently have access to the SQL Server Express database that will be used to store the email content, so I'm not sure how difficult an operation this would be. I've looked on the internet but I haven't been able to find anything. I was hoping someone here might have done something similar, either with SQL Server or with any other database.
Thanks in advance.
I'm trying to remove emails from a table but the simple update query I wrote doesn't seem to do it. I figured I'd test one record instead of the entire dbase. I've probably given more info than needed (the select statement) but wanted to give a frame of reference.
SELECT
Name.ID,
EMAIL,
COMPANY,
MEMBER_TYPE
FROM
APSCU_PROD.dbo.Name
[Code] ....
Hi, folks. I'm fairly new to SQL Server, so forgive any stupidityinherent in this question. I work at a university and a certainfaculty member would like to have her students create a simple auctionweb site as an exercise. As part of the assignment, she wants theauction site to be able to send an email to a bidder when they havebeen outbid.So she has asked me if this is possible, and how to do it. I've read abit about sending an automated email from SQL Server, but I can't findanything about how to trigger the email based upon a field comparisonin the database. I also don't know how to incorporate a field value asa variable into the body of the email.Of course, I don't expect anyone to solve my entire problem in thisforum. I was just hoping that someone could point me in the rightdirection. Can anyone give me any advice about where I should belooking for such info? Can you recommend a web page, or some otherreference material? Is there a specific terminology I should be usingwhen I search? I just don't seem to be able to find what I need.Please reply to Join Bytes! -- I don't read newsgroups regularly.Many thanks in advance!--Sue
View 3 Replies View RelatedIs there a way to automatically import incoming emails into a SQLServer Database?I know it is inefficient, but we have to run a number of rules on theemail after it is received. Store it in a database and be able toconnect other things, meetings, contacts, etc. Moving it back andforth in chunks can be difficult and the overhead could spiral out ofcontrol.So we were thinking of moving it to the DB as it was retrieved.What do you think would be a better solution to retrieve it?Does my email make sense?
View 2 Replies View RelatedJust wondering if there are other people getting mail from Pinnaclesoftware demanding payment of $179 for a subscription that they didn'trequest. I am now on the"Fourth Notice - Invoice past due"I know only one other SQL Server DBA and that person is also gettingthe mail each month. Information on the invoice says the paymentshould be made to Ragan Communication. Is there anyone else out therewho's getting these mails demanding money. I personally find itdisgusting that the company operates in this fashion.
View 1 Replies View RelatedWe have SQL server 2005 Reporting Services SP1. In Report Manager I have a shared subscription that runs every hour between 8am and 6pm (I created the shared subscription in Report Manager, then modified it in Sql Server Management Studio to run the hours I wanted). I have a second shared schedule that runs Tuesday and Friday at 7am. For 2 separate report subscriptions - one uses the hourly schedule and the other uses the 2-day schedule, the first time they run during the day it sends 2 email - after that it sends only 1 email, as it should. I created a subscription to email a report when the report content is refreshed from a report snapshot. In Properties...Execution, I selected to render this report from a report execution snapshot, and selected my shared schedule. For the History property I have selected Allow report history to be created manually and Store all report execution snapshots in history; I am not using a schedule to add snapshots to report history in the History property.
When I look at the job in Sql Server Management Studio, it has only ran once each hour. When I look at the snapshot history, there is only one record for each hour. Why is the first scheduled instance sent twice instead of once?
I don't know much about broker service so I have question. We have a content management system the we developed locally, and what we have are catagories and subcatagries. When people choose a topic we send them an email about the topic they are interested in. We are now selling webinars and white papers and articles on demand. We would like to be able to send a reminder email to anyone who signed up for a webinar or special event. Is this possible with broker service?
View 4 Replies View RelatedHi,
i am getting the following error when i try to schedule a report and Delivery it through an email
"The e-mail address of one or more recipients is not valid"
although, i have mentioned my pop3 mail account, i have included the smtp server details in the .config files as per the msdn help.
pl help me solve this
T & R,
Bharath V V
On our SQL 7.0 servers we have always used Outlook 97 as our mail client and until last week we've had no issues with this setup.
A week ago a number of the servers with this set up started hanging on jobs with mail statments using xp_sendmail and the only solution was to reboot the server. All the servers use the same NT account and the same mail box for the mail. I've talked with our Exchange guys and they say that nothing has changed on the mail server. I found a Q article (Q315886) that suggests starting sql as an application not a service to see if pop ups could be causing the problem. Well no pop ups.
I installed Outlook 2000 on the boxes and that seems to have fixed it. Or at least no problems today with those servers.
Has anyone seen this before or have any idea what might be the cause of it?
thanks
Donna
How to identify whether the files are in read write or read only?
View 1 Replies View RelatedI'm trying to do Sharepoint DR with Log Shipping and every thing configured except one thing which is switch the WSS_Content (Standby /Read-Only) DB to be ready and Write.
I tried from
GUI or ALTER DATABASE [WSS_Content] SET
READ_WRITE WITH NO_WAIT
but I received the below error:
Database WSS_Content is in Warm Standby
I have two database files, one .mdf and one .ndf. The creator of these files has marked them readonly. I want to "attach" these files to a new database, but cannot do so because they are read-only. I get this message:
Server: Msg 3415, Level 16, State 2, Line 1
Database 'TestSprintLD2' is read-only or has read-only files and must be made writable before it can be upgraded.
What command(s) are needed to make these files read_write?
thanks
OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
I presently have a Access macro that emails conditionals in a report to users in web format HTML. I would like to turn that into a stored procedure, but having some difficutly can anyone out there assit me please??
View 1 Replies View RelatedI need to send multiple emails to recipients one at a time what is the best way to do this?for example i do a select statement to get 5 email addresses, now i need to be able to fire off an email with verbiage to each one of them separately. The reason they have to be separate is in the verbiage i need to have there name in the 'Dear Jondoe1,' Here is my second dilemma. How would you insert a name in the verbiage for each email?
jondoe1@gmail.com
jondoe2@gmail.com
jondoe3@gmail.com
jondoe4@gmail.com
jondoe5@gmail.com
I have a stored proc I am running, and I would like to create a list of email addresses from a table and put that list into a variable. I did a basic while loop to work on syntax, but now I don't know how to actually get each address added on. Here's how I started it
declare @start int, @testEmail nvarchar(2000)
set @start = 1
set @testEmail = NULL
while @start <= (Select count(PADM_Email) from PADM_Emails)
Begin
--Print @start
set @testEmail = @testEmail + (Select distinct PADM_Email from PADM_Emails) + ';'
set @start = @start + 1
End
I know that the above is wrong, but I don't know how to get it right. Ideally, I want the @testEmail to look like this:
emailaddress1;emailaddress2;emailaddress3;
Hello,
I just joined the forum and consider myself a SQL beginner. I have installed and supported, run backups and similar, but haven't done much with queries and scripting.
I have a MS SQL 2000 server with a company database on it. Amongst other things, the database contains names, birthdays and e-mail addresses. How difficult would it be to setup an automated query to run every morning comparing birthdays to the current date and send automated e-mails out to matching people saying "Happy birthday ...."?
Thanks in advance,
MrNobody
"If I'm not there, I must be somewhere else"
I am setting up a data driven subscription to send out an email which includes a report. The Sql for the data driven subscription outputs the EmailTo, Subject, Comment(Body) and some report parameters. My issue is with the Comment (Body) field which I would like to format with CR/LF to make the email body look neat and readable. I've tried many different permutations of inserting the CR/LF, From concatenating Char(13) + Char(10) in which the email does recognize the Cr/LF to concatenating binary 0x0D + 0x0A which after the first concatenation of binary nothing else can be concatenated. Here is the code I've tried:
---~~~~~~~~
declare @iEndDate datetime
set @iEndDate = dbo.fn_today()
Declare @Account_group int
Set @Account_group = 999
/*
DECLARE @mybin1 binary(5), @mybin2 binary(5)
SET @mybin1 = 0x0D
SET @mybin2 = 0x0A
*/
Declare @CrLf VarChar(5)
set @CrLf = CHAR(13) + CHAR(10)
Declare @Str1 VarChar(255)
Declare @Str2 VarChar(255)
Declare @Str3 VarChar(255)
Declare @Str4 VarChar(255)
Declare @Str5 VarChar(255)
Declare @Str6 VarChar(255)
Declare @Str7 VarChar(255)
Declare @Str8 VarChar(255)
Declare @Str9 VarChar(255)
Set @Str1 = 'Good Morning,'
Set @Str2 = 'We are exposed by '
Set @Str3 = 'Attached please find the margin call detail.'
Set @Str4 = 'Please let us know if you have any questions.'
Set @Str5 = 'Thank you.'
Set @Str6 = 'Please respond to:'
Set @Str7 = ''
Set @Str8 = ''
Set @Str9 = ''
declare @t table
(
EmailTo VarChar(255),
ReplyTo VarChar(255),
Subject VarChar(255),
Comment Text,
Account_group Int,
Trading_Account_Id Int,
Broker_Code_Ky VarChar(255),
EndDate Datetime
)
insert into @t
select
EmailTo = '', -- isnull(bf.firm_email,''),
ReplyTo = '',
Subject = 'Margin Call Notice: - ' + Trading_account_name + ' - Exposure: ' + '$' + Convert(varchar(20), convert(Money, Mark_amount),1) ,
Comment = @Str1 + @CrLf + @CrLf + @Str2 + '$' + Convert(varchar(20), convert(Money, Mark_amount),1) + '.' + @CrLf + @CrLf + @Str3 + @CrLf + @CrLf + @Str4 + @CrLf + @CrLf + @Str5 + @CrLf + @CrLf + @Str6 + @CrLf + @Str7+ @CrLf + @Str8 + @CrLf + @Str9,
Account_group = @Account_group,
Trading_Account_Id = trading_account_Id,
Broker_Code_Ky = EGS.Broker_Code_Ky,
EndDate = @iEndDate
from fni_ExposureGovernmentSummary (@iEndDate) EGS
join broker_group bg
on EGS.broker_code_ky = bg.broker_code_ky
Join broker_firm bf
on bg.fbe_firm_id = bf.broker_firm_id
Order by
Broker_Group_Name,
Trading_account_Name
select top 2 * from @t
--~~~~~~~~~~~~~
The Email my company is using is Lotus Notes.
The Question is how do I code the the Comment field so that my email will recognize the Cr/LF.
Thanks
Elias
Hi everyone,
Is there somewhere that I can change the links that are included in subscription emails? The link that goes out is incorrect because the port number of the server is not included in the link, so I'd like to edit this. Does anyone know where this can be done? Thank you!
-Keith
Anyone ever setup the OutLook Express client to use SQL Mail ? I'm able to send messages via OutLook Express; however, SQL Mail doesn't recognize any profiles.
In using OutLook Express do I need to also setup a PostOffice. My server currently doesn't have any POST OFFICE or Mail software under control panel.
Thanks in advance,
Walker
Can anyone recommend a source of info on connecting Outlook to a SQL database of contacts? Also interested in third party tools/solutions that I could just buy and customize.
I need to be able to get at data from my own VB apps, but it would be nice to dump contacts into Outlook for people taking laptops and CE machines on the road. Even nicer if they could use Outlook to update addresses and upload to SQL Server.
Or am I just dreaming?
Is there any way to stop Outlook97 from checking for new mails automatically?
Thanks for any help!
Anybody use them together? If so, how did you set it up?
View 1 Replies View RelatedI have a question that I hope to get an answer from you.
We had an exchange central which used to get data from the outlook and save it in the database, then we have another solution that filters the data we need from there and save it into another database to produce a report for the economy department to be used for wages. Now the exchange central has many problems and they decided not to use it any more. What I want to do is to get data(calendar posts) direct from the outlook into my SQL 2000 database. Is it possible? If yes, what is the best approach to do?
Thanks in advance
Greeting All, has anyone had luck getting SQL mail running withoutOutlook? Will any MAPI email client work?Thanks in advance.Louis
View 1 Replies View Relatedhelp with outlook expres
View 1 Replies View Related