Hello all,
I am in desperate need of knowing how to utilize a cancel button to stop a long process being run on SQL Server. I'm using ASP (VBScript), and javascript 1.2 in my applications. I just can't seem to figure this one out.
Any and all help in this situation would be greatly appreciated!
Thanx in advance,
Chris
I'm getting closer! I created a model and selected Deploy from the Build menu on the tool bar. I started getting info on the deployment process in the Deployment Progress window, but when it reached the "Processing Cube" part, it didn't make any more progress for about 20 minutes, so I selected "Cancel" from the Build menu. Then I tried deploying it again, and I got the message that the Movie db had changed since the last deployment and would I like to continue. I clicked Yes, but I only got the Command line in the Deployment Progress Window and no progress after an hour. Do I need to completely redo the project?
I'm still on the MovieClick demo in the book "DM with SQL 2005." I gave in and imported the Access DB to SQL Server on my machine.
Hello all,
Say I have a report that is running for a long time and I want to cancel it.
Is there a way to cancel the report generation once we submit the Report Generation Button? If I close my Browser, Am I closing my session in the server side? If server is still churning out the old report and I open another browser to request the same report, I might easily crash the server if the requests for the same report keep growing?
How do I handle or how does SSRs handle this?
Thanks in advance to you all experts..
Phewa Taal
Hello,
How can I stop a report I started by using:
ReportExecutionService rs = new ReportExecutionService()
.
.
.
rs.Render(...)
I need to stop the report when a user clicks a button in my aspx page.
TIA
gad
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
select * from sysprocesses
How can I determine whether a process a system or user?
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
wwwwww Service Desk server. The database is housed there as well. Over the last couple of days, the SQL Server process has been spiking at 100%. It's so bad now that I can't log into the box at all. I'm trying to remotely stops services now, but it's a struggle. The only thing that I know that's changed recently is that some OS patches were applied on Sunday.
Any help is appriciated
I got this message from sql
"Server was unable to process request. ---> A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) "
Does anyone know what happen?
Thanks
Hi all,
is it possible to assign for each CPU a different process within one SQL Server 2005?
I got 2 servers (each 4 CPUs; 64 bit system) which should be able to failover, but on the other hand there are reporting/analysing applications and totally different sharepoint/other applications that should be hosted seperately, each on one physical server.
Thanks a lot for any help!
I have a new server attached to a SAN that is running log shipping that will be replaced. I have the following list to complete this an wonder if I am wrong or missing anything
1. Stop log shipping on primary
2. let last restores complete on failover server
3. Backup master and msdb on primary
4. Detach databases
5. Replace primary with new server and attach to SAN (server will have same name and IP as former server)
6.Bring up new sql server
7.restore master and msdb
8.restart log shipping
My question is mainly on if I do a restore of the master and msdb, do I need to reatach the databases first?
Hi,Is 'sqlserver.exe' the only windows process does everything for thatinstance of the database?Please explain in details the SQL server process architecture.Thanks*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies View RelatedSQL Server 2000 sp3; single instance; used as backend to Access 2002:I have 20 tables used as a temporary store, each one receiving datafrom VB based remote applications that insert new data on a regularbasis.My current Access apps are used to collate, action and summarise thisdata.The collation process involves checking the new data and adding it toa single table, and if action is required flag this - this is done inthe "server" Access app. The other Access apps are used to filter andview the data, reports etc.Question:is it possible to do this collation in SQL Server by some automatedtask triggered by an event, thereby speeding things up and releivingthe need to be logged on with the "server" Access app ?The function outline for each of the 20 tables would be:1. Are there any new records, if so insert them into the central table2. If the status field=1 of any these new records copy these recordsto a 2nd table3. Repeatregards,B Moor
View 3 Replies View RelatedHi, I am developing an application with vb.net and sql server 2005 express edition. If a user logs in (through the application), I want to query the computer host from sql server 2005 in which the user logs on. Is there any special table or procedure that I can use to achieve this? Thanks.
View 2 Replies View Related
Hi there!
I've a problem, what seems to be a Bug...
I've a Win 2003 Server, 64Bit, Enterprise Ed., SP1 on an Intel Xeon CPU 3,2 GHz, 8,00 GB RAM with physic. Adressexp.. Furthermore, i've a SQL Server 2005, latest Service Pack (9.0.3042).
When i restart the SQL Server, i've aprox. > 7GB of free RAM (showed in Task Manager). At night, a few SSIS-Pakages run, and in the morning, the free space is aprox. 1 GB. The night after that, some SSIS-Packages fail, because there's not enouhg free Memory. So i restart the SQL Server (Prozess), and it runs (for one night).
I've monitored the SQL Server while he is attacked by the SSIS-Packages, it doesn't take much more then 1,8GB RAM (Private and Virtuell). The DTS-Process doesn't take more than 1,7GB.
Question 1: Where is the lost RAM-Space (7GB - 1,8GB - 1,7GB = 3,5GB, so ~2,5GB are "missing")
Question 2: Why does SQL Server not realeases the RAM?
Question 3: Is there a good tool to monitor the uses RAM (incl. "hidden")?
Thanks,
Torsten
Can anyone direct me to either some code or reading, that talk about gather all my server information. What I want to do is gather all the server Used and Free space size. I'm know a little sql-dmo, and I think I can do it that way, but not sure.
View 1 Replies View RelatedI am having a few problems using ASP-DB advertised on this site. Queries that were working rather quickly a week ago are timing out for no apparent reason. (asp-db seems to be buggy)
I have no idea as to what is causing the query (ie select * from tables X, Y, Z) to time out. The process id on SQL server says AWAITING COMMAND or SLEEPING.
Also, the processes on SQL server do not seem to die. Can this be accomplished via ASP or other means.
All help is greatly appreciated
Thanks
Ziggy
I ran a DBCC SHOWCONTIG on a large database. Because the execution was taking longer than I wanted I cancelled and then killed the process running the DBCC. This action seems to have abnormally ended SQLServer and subsequently crashed the entire NT server. Have you experienced any behavior similar to this when using DBCC and/or killed processes?
View 3 Replies View RelatedHello everybody .
I have 40 GB db running mostly transaction processing.
I set up
1. back full backup 2 times a day (takes 30 -40 min)
2. log backup every 15 min
3. custom log shipping
4. We don't won't use Cluster.
Once in while becouse of nethwork, or other problem log shipping fails,
so I have to restart log shipping all over starting from restore in stand by mode last full back of my db.IT takes 2-3 hrs just to do this restore !!!
1. So I am asking advice is any way I do restore in less time ?
2. Should diffrential backup be taken ?
3. We will not use Custer
Alex
;)
Hello Everybody,
My name is Fabio and I post from Italy.
First, I don't know if this argument was already discussed in the past, but I'm new in this group so ...
Second I'm not so expert in DB due to the fact that I'm using SQL for the first time in my life ...
I use a store procedure to pass to every single user in my intranet (more than 150), details of different clients taken from an SQL table containing around 30.000 names.
Users have an ASP page displaying the information Selected in the DB.
This means that 150 users display info of 150 different clients.
To to this I use this code in store procedure:
CREATE PROCEDURE sp_assign_name
@iduser int
AS
if exists(select top 1 * from recallornotes where tmkoperator= @iduser)
update nominativitelecom set tmkmotrecall=convert(nvarchar(1), tmkstatus), tmkstatus=7 where id in (select top 1 id from recallornotes where tmkoperator=@iduser)
else
begin
if exists(select top 1 id from nonotes)
update nominativitelecom set tmkmotrecall=convert(nvarchar(1), tmkstatus), tmkstatus=7, tmkoperator =@iduser where id in (select top 1 id from nonotes with (UPDLOCK) order by NewID())
end
GO
This is working quite well when the number of users are more ore less around 50/60, when the number grows, on the IIS server (Pentium IV server, with Win 2000 in English, MS SQL 2000, and 1 Giga of ram), a file called DLLHOST.exe start to use the 100% of the CPU, and the users cannot display any other ASP page on their screens.
It is not a virus (some newsgroup report this problem connect to a worm virus, but we have latest antivirus files installed and spyware detect/delete on).
The SQL log reports this error:
"transaction (process id 69) was deadlocked on (lock) resources with another process and has been chosen as the deadlock victim. rerun the transaction".
Is there a way to avoid the conflict that occur when different users are trying to select the same record in the DB ?
In other terms, which process will you use in the same situation to select one record per user ?
Thanks in advance for your precious help,
Fabio