Cannot Edit SQLServer Using MS ACCESS
Mar 31, 1999
We are using MS Access as a front end to a SQL Server 6.5
Database using ODBC & linking tables in Access.
We are unable to edit certain records using access. We
get the following error message:
"This record has been changed by another user since you started
editing it. If you save the record, you will overwrite the changes
the other user made.
Copying the changes to the clipboard will let you look at the values
the other user entered, and then paste your changes back in if you
decide to make changes."
What the message says is untrue in our case. Worse, there is
no way to recover and have the desired change posted. This error
occurs only with certain records. This error occurs when there are
no locks active (and only 1 client logged in).
I am inclined to think that this error may be the fault of ODBC.
Updating the same change directly into ISQL works fine. SQL Server Permissions
have beeen checked & double checked.
If you have suggestions as to how this error can be rectified, please contact
me:
Mark Blackburn
mark@mbari.org
http://www.mbari.org/~mark
View 3 Replies
ADVERTISEMENT
Aug 23, 2000
This is a basic, remedial question, but I've no experience whatsoever with SQL server or Access (although I'm familiar with basic DB concepts). Even so, I have inherited this project because no one else will take it (besides, I like the challenge of learning something new :-). If I understand correctly, I can use Access 2000 to create and edit DBs on my SQL 7 server, and to run queries. This is done by creating a WBEM ODBC connector (I have no idea how this is done). I'm pretty good at figuring things out on my own, but I sure would appreciate being pointed in the right direction. What I'd like to know is first of all, am I on the right track, and secondly, what do you all recommend as a good source of info on this topic (the Microsoft web site, technet, manuals?).
All info is greatly appreciated.
thanx,
-scott
View 3 Replies
View Related
Jul 8, 2006
Hello Expert!
I have 2 Database €“ Access & SQLServer(ver 7)
I need to Import Data TblShift from Access to SQLServer €“ using DTS I€™ve done this successfully!
Now I want to use parameter so I only importing record within range (e.g. ShiftDate BETWEEN 05-24-2006 AND 06-23-2006)
In SQLServer, I have created table to store the date range as following:
TblParameter
DateFrom: 04/24/2006
DateTo: 05/23/2006
How do I use the date range from TblParameter(SQLServer) to import record from TblShift(Access) using DTS?
Is this possible or any better solution for this?
TIA
Regards,
View 4 Replies
View Related
Apr 30, 2007
Hi guys,
I need provide some of my users an easy way of accessing a SQL Server table through MS Access so that
they can edit the table.
Please let me know which of the following is more appropriate to accomplish this task.
1. Creating a Data Access Page
2. Creating a Link Table
I thought I could it do it though a Data Access Page but I was only able to see the data but not edit it. But, I
know there is a way of doing this. Please throw some light on this topic.
Thanks a lot for your time.
Regards,
-RL.
View 3 Replies
View Related
Apr 30, 2007
Hi guys,
I need to provide some of my users an easy way of accessing a SQL Server table through MS Access so
that they can edit the data in the table.
Please let me know which of the following is more appropriate to accomplish this task.
1. Creating a Data Access Page (OR)
2. Creating a Link Table
I tried to create a Data Access Page but I could only be able to see but not edit the data in the table. But, I
guess there is a way to do that.
Please throw some light on this topic.
Thanks a lot for your time.
-RL
View 1 Replies
View Related
May 23, 2008
with this message
Cannot open database "hayat" requested by the login. The login failed.Login failed for user 'NT AUTHORITYIUSR'.
but i have 'NT AUTHORITYIUSR' user n my sql srver and my db how can i mak th permission right and i don't to us user and passwordx
View 6 Replies
View Related
Aug 23, 2006
Hi all,
I have to transfer an Access Database to SQLserver. There're hundred of tables in the original DB which use True, False value. Those will be translated to -1, 0 in SQLserver. I need them to be 0 , 1 instead (-1=>1).
Is there a way to tell SQLServer to process this modification during the transfer or is there a store procedure which can go through all tables and modify those values ?
Any help will be appreciate..
Thank you all
View 8 Replies
View Related
Nov 14, 2006
I am having Access database in my local system . Values in the access database will be updated for every 5 min . I am also having Sqlserver database online with the same structure database of Access in my local system . What i want is my Access database values must be updated in my online sqlserver at every 5 min automatically .How to do that ?
View 3 Replies
View Related
Sep 7, 2007
Hello
i have one prob . i m using sql server 2000 . and i have write a store procedure to fetch data from multiple table using cursor . this query exculate in sql server . but i can't fetch this data from in our page . how to fetch data from using multiple table .plz help
thnx
View 8 Replies
View Related
Aug 31, 2004
How can i access multiple sqlserver database using VB
eg. insert 1 record in a database from other databse.
View 1 Replies
View Related
Jul 20, 2005
can someone point me to the differences in the datatypes between accessand sqlserver?I've writen a program that creates a table in access using an sql createquery. However, if I point to a sqlserver odbc datasource the querybombs
View 4 Replies
View Related
Jul 20, 2005
I migrated a DB from Access 2000 to SQLserver 2000.The tables are OK, but I see the old Access views... as TABLE inSQLserver!!Any suggestions?--
View 3 Replies
View Related
Sep 11, 2006
Hi;
I can access SqlServer 2000 fine, but not SqlServer 2005. My client is on Windows XP and SqlServer 2005 (dev version) is on Windows 2003. When I run I get:
Error: net.windward.datasource.DataSourceException: JdbcDataSource could not ope
n jdbc:sqlserver://T1-Databases;databaseName=AdventureWorks;integratedSecurity=t
rue;
net.windward.datasource.DataSourceException: net.windward.datasource.DataSourceE
xception: JdbcDataSource could not open jdbc:sqlserver://T1-Databases;databaseNa
me=AdventureWorks;integratedSecurity=true;
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1030)
at net.windward.xmlreport.RunReport.main(RunReport.java:165)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Invalid integratedSe
curity property value:true
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(U
nknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Sour
ce)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1024)
... 1 more
Exception in thread "main" net.windward.datasource.DataSourceException: net.wind
ward.datasource.DataSourceException: JdbcDataSource could not open jdbc:sqlserve
r://T1-Databases;databaseName=AdventureWorks;integratedSecurity=true;
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1030)
at net.windward.xmlreport.RunReport.main(RunReport.java:165)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Invalid integratedSe
curity property value:true
at
com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(U
nknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Sour
ce)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1024)
... 1 more
Any ideas?
thanks - dave
View 6 Replies
View Related
Nov 22, 2007
Hello
Normally we installs our SQLServers for internal use, but now we've a data supplier which we're going to expose a SQLServer at.
The datasupplier should be able to log on the SQLServer, so I've done the following.
Created an IP-adress from the outside to point at our server
Opened port 1438 in the firewall
Installed SQLServer 2000 Developer Edition as an instance (ie. ServerAINST001)
Opened SQL Server Network utility, selected the correct instance and TCP/IP and altered the default port to 1438
And tried to connect, but with no luck. Can anybody guide me in the right direction?
Kind regards
Janus
View 9 Replies
View Related
Mar 31, 2007
Hi,
How should I do to access a table in SQLServer Express database using VB.NET and ADODB?
Thanks!
View 6 Replies
View Related
Feb 24, 2008
I use Access 2007 SQLserver Upsize but get errors saying SQL Server not found. Is there another way of copying tables from Access to SQL Server 2005 Express.
I am not very familiar with SQL Server Express but did a course in SQL Server programming.
View 8 Replies
View Related
Oct 16, 2007
Hi,
I installed SQLServer with a instance using the following cmd:
/qn INSTANCENAME=MYINSTANCE ADDLOCAL=All SQLCOLLATION=Latin1_General_CI_AI=Latin1_General_CI_AI PIDKEY=ABCDE12345FGHIJ67890KLMNO SECURITYMODE=SQL SAPWD=Pass SQLAUTOSTART=1 ENABLENETWORKPROTOCOLS=0
When I try to connect to the server using VS2005 (VB) using the code:
Dim instance As System.Data.Sql.SqlDataSourceEnumerator = System.Data.Sql.SqlDataSourceEnumerator.Instance
Dim table As System.Data.DataTable = instance.GetDataSources()
For Each DRrow As DataRow In table.Rows 'DRrows
C1List1.AddItem(DRrow(0).ToString & ";" & DRrow(1).ToString & ";" & DRrow(3).ToString)
Next
I can see the Server Name, but not the Instance Name.
I've already checked the SQL Configurantion Manager, and I've allowed this instance to accept remote connections (created by the cmd install command).
NOTE: I'm testing the connection on a Domain, but only using the SA account (SQLmode).
Can somebody help me?
Thanks.
PS: I also created an Firewall exception in Windows on the port 1433.
View 8 Replies
View Related
Sep 19, 2007
Hi Friends ,
I have a problem to access the sqlserver Reporting on different server. Actually I created Sql Server Reporting in one server with in that server i able to access the report. but out of that server that means another server webapplication i unable to access it. how can i rectify this problem.
View 2 Replies
View Related
Jul 20, 2005
I need to access a MS-SQLSERVER with a Linux (SuSE 9.0) based computer.I need to do some selects.What do I have to do what kind of client Software and how do I have toinstall on the linux Maschine to comunicate with this Server?Probably some kind of odbc?thanx for any hints.Maximilian Gablinger
View 2 Replies
View Related
Feb 14, 2008
Hello:
Having an extremely frustrating issue trying to connect to SQL once I've done the NET START MSSQL$SQL_DEV /c /m /T3608.
Briefly: SQL 2K and 2K5 named instances running on same DEV box. Can't open admin:<serverinstance> in SSMS, I get the following error:
"Login failed for user 'sa'. Reason: Server is in single user mode. Only one administrator can connect at this time. (Microsoft SQL Server, Error: 18461)
This happens regardless of credentials supplied (my AD acct (local admin on box), AD acct running SQL services or sa). Object Explorer is closed, remote connections disabled in SS Surface Area Config. I open SSMS and make no attempt to connect to server. Choose File >New > Query with Current Connection. In dialogue box, I attemp to utilize DAC and get the above error.
In DOS prompt where I issued the single user mode startup cmd, try to use sqlcmd to grab DAC session and receive the following error:
SQL Network Interfaces: An error occurred while obtaining the dedicated administrator connection (DAC) port. Make sure that SQL Browser is running, or check the error log for the port number [xFFFFFFFF]. Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
So, no matter what method I use, I've managed to disable ALL access to the instance, despite the tips I've seen here and on Google.
I need to move the system databases to new disk volume, but cannot do so until I can open a connection to the instance once I've put it in single user mode. Looking in the SQL Srvr log following startup in single user mode I see the following:
Message
Server is listening on [ 'any' <ipv4> 3560].
Message
Dedicated admin connection support was established for listening remotely on port 3560.
Do I need to call the port# specifically when using SSMS or sqlcmd?
I can include screenshots of the failures and mssgs if necessary.
More disturbing is in a DR situation, I CAN'T OPEN A SESSION TO THE INSTANCE, which would be a very bad thing...
Please Help!
View 21 Replies
View Related
Jun 18, 2007
Could someone point me to an article that shows how to configure SQLServer express so I can connect to it over the lan and Internet?
Thanks
View 1 Replies
View Related
Nov 8, 2006
So far I've been unable to connect to a test SQLServer Everywhere/Compact database with MS Access. I installed the new SQLServer 2005 Native Client to no avail. Has anyone done this?
View 10 Replies
View Related
Sep 16, 2006
Hello All,I have a webservice uses a vb.net component that accesses thrid party dll to connect to a sqlserver dbase, username,dbase name ,server and password are passed to the third party dll for login purpose.This works fine in development evironment when pda client calls webservice, A soap error is thrown to the client "sqlserver does not exist or access denied" when the client calls the deployed webservice. I have tried the following 1. Added ASPNet user to the database 2.Added domian user to the database both has public and dbowner rightsCan any one help??[:'(]Thanks Regards
View 1 Replies
View Related
Aug 24, 2005
Hi, i need some help, i have a problem trying to access data in my local network.
I have a PC with ms windows server 2003 and ms sql server 2000, and i want that the others PC in the network can access the data. I installed the client sql server in the others PC, but i can't make it work. What i have to do?
Thanks
View 5 Replies
View Related
Nov 15, 2006
Hi:
I am getting access denied error "cannot connect to server" while trying to connect Integration Services. I am trying to connect from my laptop to the SQLSERVER database server.
I followed the document "Connecting to a Remove Intergration Services Server" , doc id: aa337083.
But I can connect to IS if I log remotely to the server.
Any thoughts on this ?
Thanks
-Rajesh
I am getting following errors.
===================================
Cannot connect to cvsslmdd1-vm.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "cvsslmdd1-vm" failed:
Access is denied.
.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "cvsslmdd1-vm" failed:
Access is denied.
.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
View 7 Replies
View Related
Mar 12, 2008
I have used the Access 2003 Upsize Wizard to create SQLServer Tables, all worked fine except I cannot Update the tables from Access.
The idea being to use Access Forms as the front end to an SQLserver back end as the Access database is quite complex and filled with macros and queries, not one of mine.
I can update the table in SQLServer but the connected tables at the Access end are read only. Why?
Kind regards,
Johnv
View 1 Replies
View Related
Oct 31, 2006
One single table when openen from a MSAccess project file gives error:
The setting for DecimalPlaces property must be from 0 through 15, 255 for Auto (default).
After which the table is openend normally. I don't recall setting Decimal Places to the table. The only numeric fields are two INTs that are also ID's (PK and FK). This error occurs also when recreating the db project. These fields can not be edited eitther from MSAccess nor Enterprise Manager.
What can be done on the table, resp. MSAccess to change this?
View 3 Replies
View Related
Aug 12, 2007
All,
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it
and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
Thank for all help received in advance,
Dave.....
View 2 Replies
View Related
Jul 27, 2004
I recently had to reinstall a new instance of SQLServer 2000, but was unable to use the previous server name. As a result, my Access2000 front end is not happy with it's linked tables. I can't seem to find anyplace within Access to universally change the address of the SQLServer used as the back-end for all linked tables.
When I do try to access the linked tables through Access, I get an error, and the option to change the server location. When I try to type-in the new SQLServer location, there is an attempt to reconnect to SQLServer, but a whole lot of errors are generated, and none of the data is transferred into the Access table.
I really don't want to have to re-do my Access front end, so it seems it would be easiest to somehow reinstall SQLServer to have the same server location it used to. Is there a good way to completely erase all traces of SQLServer so that I can have better luck reinstalling it to the same location it used to be in? Just using the uninstall program from SQLServer doesn't seem to be cutting it.
Thanks!
View 1 Replies
View Related
Dec 18, 2001
When I try to make a connection to an Access .mdb I get the following error:
"Unable to open application. The workgroup information file is missing or opened exclusively by another user"
Yet, I am able to open the file through Access and have necessary permissions and I know no one else has it opened. The mdb is password protected and I have provided the correct login information in the DTS connection.
View 1 Replies
View Related
May 10, 2007
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.IO;
namespace Predict.Services
{
public static class Foo
{
public static string GetIntradayQuote(string symbol)
{
string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
request.Timeout = 1000;
HttpWebResponse response = (HttpWebResponse)(request.GetResponse());
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close();
response.Close();
return returnQuote;
}
}
}
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
Regards,
Skipper.
View 1 Replies
View Related
Sep 20, 2006
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
View 1 Replies
View Related
