I am not able to see the Data Source in Visual studio 2012. I have tried several things like 'Alt + shift + D' which is meant to bring up the datasource tab but it does not. I have also looked in view->Other windows but its not displayed there.
View 5 RepliesI am trying to edit an SSIS package due to a change in the schema of one of the source tables. When I open the package in Visual Studio, I see the exclamation mark on the object but before I can make change or go to edit anything in the package, I hear the "dumphhh" sound that indicates an error. There is no dialogue box but the program is now locked up. Then after 10 - 20 seconds the program closes.
How am i supposed to add the new column to the data source metadata if I can't edit the package?
Hi ,
I am using sql server 2005 standard edition and i have installed MSXML core services 6 and also ADOMD.net for analysis services.
i am using visual studio 2005 version of 8.0.5072742 and the problem that i am facing is when i use to develop reports using Analysis services as a data source , the error message pops up and VS 2005 gets crashed.
i could define the dataset , layout part and when i prees the preview , it gets crashed.
could any one help me on this problem to sort out.
Regards
RMP
It is possible to create Analysis Services project (*.dwproj) in Visual Studio 2012 Data Tools?
View 5 Replies View RelatedI have a personal project that performances analytics on a SQL Server (express) Db thru SSMS. I connect via an ODBC to SQL Server and create Access 2013 queries and reports of web traffic to my Web portal. The source data is from Google Analytics of various webpages, which I import to SQL Server and link to the Access Db.
I wanted to automate some of the manual extractions thru SSIS with a package that would pull in the Xcel sheets from SQL Server (or even Access). I started SQL Data Tools (SSDT) and here is my problem. When I attempt to open Package.dtsx I have an error that indicates SSDT must be installed on one of several SQL Server installation. Mine is Evaluation which I have and SSDT is installed in it.
I used SSDT to open Visual Studio 2010 and then it indicates I must have SSDT in SQL Server 2012.
Apparently I have to run SQL Server Setup and install SSDT in it. But, I don't have a setup of this type. Or at least I have not found it by searching my Windows 8.1 machine. This seems like a very elementary problem that can be fixed by a MSDN download or some pointer to where I need to go to install SSDT within SQL Server 2012.
I am building a Visual Sudio process that will Truncate and load data to an Access database (2010) from SQL Server (2012). I have one "Execute SQL Task" for one table (LungCancer_HF_Patients):
"DELETE LungCancer_HF_Patients.* FROM LungCancer_HF_Patients;" that parses and works.
I have another table (Report1):
"DELETE Report1.* FROM Report1;"
that does not parse with a message "The query failed to parse. Incorrect syntax near '*'."
Why the first one parses correctly and the other one does not?
I can't connect to LocalDB using Visual Studio for Web Express 2012 or SMSS 2012 in a Windows 8 environment. LocalDB is installed and some things do work, however. The basic error is the very common:
Cannot connect to (LocalDB)v11.0.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 50 - Local Database Runtime error occurred. Error occurred during LocalDB instance startup: SQL Server process failed to start.
In a command window, I can query the state of LocalDB an "info" parameter:
C:Program FilesMicrosoft SQL Server110ToolsBinn>sqlLocalDB info
SportsStore
TestOfLoc
v11.0
The first two are tests created at the command line using sqlLocalDB.I have reinstalled and repaired LocalDB several times with no errors reported.
In VisualStudio 2012 in C# projects when you double-click on a identifier (variable name, class name, etc) then all occurrences of that sting in the current file are highlighted.
It doesn't work in SQLServer projects in sql files. It is a shame that although we are in VisualStudio we are still limited in functionality.
Is there a way to enable this feature?
Code Snippet
Hi there,
I'm struggeling for more than a week now with this problem, without a finding the solution.
I have two databases, MS Access and SQL Server 2005 Express Edition
Using a procedure in Visual Studio i would like to copy all the records from one table in MS Access into an existing table in SQL Server (the tables have the same name and the same layout)
I tried to prepare one Dataset to copy from Access into SQL Server but when i run the command 'DaSQL.Update(DsSQL, "Tabella") nothing happens (not even an exeption has been raised), looking during debug, the DataSet seems filled though...
Please could anyone explain what's wrong and / or is there a more quicker way to copy data from a table to another?
Note i woul have as a final goal to get data from an AS400 database by ODBC, manage it, and put it on SQL Server for a 'data mining' scope (eliminating the use of MS Access, not suited for FE-BE).
the procedure goes like this;
' Create a connection to the MS Access Database
Dim connectionToAccess As New OleDbConnection(DBConnectionAccString)
strsql = "SELECT * FROM [TABELLA]"
connectionToAccess.Open()
Dim DaAccess As New OleDbDataAdapter(strsql, connectionToAccess)
Dim DsAccess As New DataSet("ACCESS")
DaAccess.FillSchema(DsAccess, SchemaType.Source, "Tabella")
DaAccess.Fill(DsAccess, "Tabella")
' Create a connection to the SQL Database
Dim connectionToSQL As New SqlConnection(DBConnectionSQLString)
connectionToSQL.Open()
Dim DaSQL As New SqlDataAdapter(strsql, connectionToSQL)
Dim DsSQL As New DataSet("SQL")
DaSQL.FillSchema(DsSQL, SchemaType.Source, "Tabella")
DaSQL.Fill(DsAccess, "Tabella")
DaSQL.Update(DsSQL, "Tabella")
Note I tried also the following, withou a result;
DsSQL = DsAccess.Copy
DaSQL.Update(DsSQL, "Tabella")
Please is there someone who could respond !!???
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View RelatedThe goal is to address visual source safe database on the network. We have the srcsafe.ini in the network as \ipaddrsrcsafe.ini. Now I create a new VSSDatabase object and call its OpenDb. Well for simple consle app or winform it is ok. But I was running it under Sql server Stored Procedure. It failed for I cannot access the source safe path throgh the COM object.
I know it is because of Windows identity. So I add the following code before I want to open the database, changing the to the WindowsIdentity:
WindowsIdentity impersonId = SqlContext.WindowsIdentity;
WindowsImpersonationContext orgCtx = null;
try
{
orgCtx = impersonId.Impersonate();
VSS_Database = new MVSI.VSSDatabase();
// VSS_Database.ImpersonateCaller = true;
VSS_Database.Open(Path, UserName, PassWord);
}
catch (Exception err)
{
orgCtx.Undo();
throw err;
}
finally
{
orgCtx.Undo();
}
Without the commented line "// VSS_Database.ImpersonateCaller = true", this does not work at all. It just behave like no changes to the windows identity.
However if I add this code, well, OpenDb will result in a No-response query. The Sql server is running the query with no responses.
Have you ever met that before? I am really frustrated. Thanks
I used an evaluation version till last week.
Was working fine so I decided to buy a Standard License.
Installed during the weekend, I had many problems till I decided to reinstall completely Windows. I have installed SP1
Everything worked fine then, ONLY not one of my SSIS packages still works; I get following error when editing the data flow task
The thread 'Win32 Thread' (0x7e8) has exited with code 0 (0x0).
Unhandled exception at 0x54fc5e89 in devenv.exe: 0xC0000005: Access violation reading location 0x00000000.
Please help, this is a disaster otherwise
I am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
I am sorry if this is the wrong forum for this question but I can not find better fit.
I am using Visual Studio 2005 to write an asp.net web site which includes an SQL data base. In the databaseI have a table called 'ACCOUNTS' which has primary key column called 'ID' and a nvarchar column called 'Name'.
I want the values in the 'Name' column to be unique in the table so that all accounts have unique names. I don't want to make the 'Name' column the primary key because I want people to be able to change the name of their account after it has been created.
It seems to me there must be some way to add such a constraint to the table but I can find none. I have searched the documentation and seen loads of references to unique columns but I can't find any way to set a column to unique thru the IDE (or any other way). Can anyone help me?
Thanks in advance for any help.
I have an assignment where I am asked to create a test report with Cascaded parameters in a report for use on an Intranet. Found a good guide on a site named slqtips. The only problem is, that when I have created my data source, my data sets and my queries, I should go to the window "Report parameter properties", for specifing the data which should be included in the choices in the report, and I cannot find it! As a matter of fact the milieu I work in, Report designer in Visual Basic Studio Shell 2013, on a MS SQL 2012 Server, looks different in many way compared to the guide. It actually also differs from the Pictures in the book "Microsoft SQL Server 2012 Reporting Services" I also try to use for the purpose.Am I perhaps working in the wrong place, or what can the problem be? Is this Visual basic 2013 Window some kind of upgrade which is different from the original version where you used to work with Report designer?
View 6 Replies View RelatedHello:
I have a framework 2.0 winforms application that uses the data mining viewer controls. I upgraded the project to visual studio 2008 and compiled it under framework 2.0. It compiles fine, but when the form with the TimeSeriesViewer control loads, the application throws the following exception:
System.Reflection.TargetInvocationException was unhandled by user code
Message="Unable to get the window handle for the 'AxChartSpace' control. Windowless ActiveX controls are not supported."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.AxHost.InPlaceActivate()
at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state)
at System.Windows.Forms.AxHost.CreateHandle()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.AxHost.EndInit()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.InitializeComponent()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer..ctor()
at RMS2.UI.DecisionSupport.ShowModel(String modelName, Int32 tabIndex) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 72
at RMS2.UI.DecisionSupport.DecisionSupport_Load(Object sender, EventArgs e) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 42
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
InnerException: System.AccessViolationException
Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.UnsafeNativeMethods.IOleObject.DoVerb(Int32 iVerb, IntPtr lpmsg, IOleClientSite pActiveSite, Int32 lindex, IntPtr hwndParent, COMRECT lprcPosRect)
at System.Windows.Forms.AxHost.DoVerb(Int32 verb)
at System.Windows.Forms.AxHost.InPlaceActivate()
InnerException:
The control is being added programatically, as in the wiinforms samples. Can anyone suggest a workaround? Thank you in advance.
- doug
I have a client who has SSMS installed on her laptop. She is able to connect to the SQL server via SSMS in the office and query data on the server.
She needs to be out of site often and doesn't have internet access. She asks if the data tables can be "backed up" or saved on her laptop, so she can look at them without worrying connecting to the server. I am not sure if this can be achieved, as SSMS is built for accessing a server, not a desktop. Myself never have this need. If I really need it, I would go to Microsoft Access and create an ODBC connection to the datatables. But this client thinks that Microsoft Access is beneath her.
I've used the Balanced Data Distributor with Visual Studio 2010 and SQL Server 2012 successfully. I've now installed BIDS 2013 and I'm trying to get the Balanced Data Distributor to appear again in the SSIS Toolbox.
I've installed the x86 and x64 version and it won't appear. I've tried the new version which is supposed to have a fix for some SQL Server 2008 issues but I get the message:
The installation is not successful. Check the following prerequisites: 1. Either Integration Services or BIDS has to be installed. 2. The version of these components has to be either SQL Server 2008 SP2 (or future SPs) or SQL Server 2008 R2 (or future SPs).
That seems this version only works for SQL Server 2008.
Basically i'm trying to create an SSIS workflow to download Sharepoint List data to SQL Server on a schedule of some kind.do we actually have to use the GAC install approach in order to get the Sharepoint List Destination and Sharepoint List Source entries to appear on the SSIS Project workflow entities?
View 4 Replies View RelatedI have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View 1 Replies View RelatedI recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?
Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
I'm trying to access Visual Fox Pro Data from Sql Server 2000, Cananyone have any Idea ?Thanks
View 1 Replies View RelatedI am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
Thanks
I have created a database under management studio and i want it to be connected in visual studio but it failed
the error msgs said that the database can't be connected coz the database with same name exits but that is not true
How do i get the database that i am using in visual studio into my SQL server management studio?
i need to create some scripts to create stored procedures on a live server.
I have SSRS in Visual Studio. I created a query that works fine in SQL Server Management Studio, but when pasted into Visual Studio I get the error "An expression of non-boolean type specified in a context where a condition is expected, near '('.
Here is the query. Can anyone help on why this isn't working? Thanks.
SELECT CASE WHEN MONTH(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = MONTH(GETDATE()) AND YEAR(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = YEAR(GETDATE())
THEN dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount ELSE 0 END AS CurrentMonth,
CASE WHEN SubString(dbo.MAS_CCS_GL_Account.Account,1,3) = '400' THEN 'ALEDO' ELSE ' ' END AS Location,
dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate, dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber,
dbo.MAS_CCS_AR1_CustomerMaster.CustomerName, dbo.MAS_CCS_ARO_InvHistoryDetail.DetailSeqNumber,
dbo.MAS_CCS_ARO_InvHistoryDetail.LineType, dbo.MAS_CCS_GL_Account.Account, dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount
FROM dbo.MAS_CCS_AR1_CustomerMaster, dbo.MAS_CCS_ARN_InvHistoryHeader, dbo.MAS_CCS_ARO_InvHistoryDetail,
dbo.MAS_CCS_GL_Account
WHERE dbo.MAS_CCS_AR1_CustomerMaster.CustomerNumber = dbo.MAS_CCS_ARN_InvHistoryHeader.CustomerNumber AND
dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber = dbo.MAS_CCS_ARO_InvHistoryDetail.InvoiceNumber AND
dbo.MAS_CCS_ARO_InvHistoryDetail.SOGLSalesAcct = dbo.MAS_CCS_GL_Account.AccountKey
I have installed Visual Studio 2005 which includes SQL Server Express but not the Management Studio.
Can I install SQL Server Management Studio Express?
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies View RelatedOf all the Visual Basic.NET data access books that I have purchased and all the Internet site example code that I have reviewed, none have had any good examples of multi-threaded VB.NET code doing data access.
I am trying to avoid the non-responsiveness in a VB app while a simple data retrieval from SQL Server 2005 is in progress.
If anyone knows of any book titles or web sites that have example code (good or not) of multi-threaded VB.NET applications doing data access against Microsoft SQL Server (7, 2000, or 2005) or even against Microsoft Access(TM), it would be very much appreciated if you could provide the book title or URL to point me in the right direction.
The more examples the better.
Thanks in advance.
I'm new to sql server. Last week I made my first cube. Everything went fine. But when I want to explore the cube (from the explore panel in Visual Studio 2012) in Excel then I'm getting the error "Initialization of the data source failed".
Check your database server or contact your database administrator. Make sure the external database is available, and then try the operation again. If you see this message again, create a new datasource to connect to the database.
I'm using Sql Server 2012. Visual studio 2012. Excel 2013 on Windows 10
Hi All,
I would like to create a Integration Service for import a MS Access file to SQL server, and this service will be start at every night, but the MS Access data source path is different in every day, such as "c:20060201.mdb" or "c:20060202.mdb" and so on...
how can i to define the data source path on Integration Service by every night automatically.
Thx for your help.
Laputa
I have an Excel add-in that connects to a SQL Server Express 2005database. I've decided to create a configuration piece for this add-inin Visual Studio 2005 Express. I added a data connection using the dataconnection wizard and all appeared to go well. Anyways when I attemptto open SQL Server Express to administer the database, it was corruptedand I had to restore it.I eventually got it to work correctly (I'm pretty sure I followedpretty much the same steps as before), but I was just wondering ifanyone had experienced problems like this? I find it a bit scary thatit may be that easy to corrupt the database by just creating a dataconnection.
View 2 Replies View Related