Hello,
I am running an SAP installation on clustered DELL poweredge 1850's with a shared scsi disk system. I am running Windows 2000 sp4 with sql 2000 sp4. I am trying to restore a database from a .bak file on a clustered disk. When I attempt to access the disk through enterprise manager it is not there. I only get access to the E: drive (which is clustered as well)
I recently installed an evaluation copy of SQL Server 2000 on a machine with Windows Server 2000. Nearly all actions in the enterprise manager cause 15-second to 60-second loud, monotonous reads of the hard drive. Anything from expanding a tree item to creating a table.
This makes the product more or less unusable. What could be causing it?
All other software on the machine works normally, and nothing else seems wrong.
When I select All Actions>Backup Database and then click the ... button to choose a location on the hard drive, SQL Enterprise Manager Hangs and I have to kill it from Task Manager.
All other areas of EM browse the disk drive without a problem. (DTS, File Groups, etc.)
Anyone ever run into a similair problem?
Thanks
I would like to reinstall the enterprise manager of sql server 2000,and i have currently sql server 2000 SP4 installed on it.I googled on it, and read that installation of enterprise manager ispossible from the setup disk, however, this is not possible: it rejectsbecause of the service pack.How can I reinstall enterprise manager, without haveing to uninstallsql completely?ThanksPrem
View 4 Replies View RelatedHow do I go about accessing the SQL Server Enterprise Manager to use DTS?
Robert
Is there anything significantly better in Enterprise Manager 2000 vs. the old EM from SQL Server 7.0?
If so I'd be willing to pay the $50 for the SQL Server 2000 Developer
Edition to get it... if not it seems dumb to pay for anything when MSDE
2000 is free and I already have the old EM. (Although I have
installed MSDE 2000 as a new instance and can't figure out how to get
at it via EM.)
Thanks for any insight.
I have just discovered something with EM 2000. In the old days (SQL Server 7), you could right click on a table, choose OPEN TABLE -> SELECT ALL ROWS and get a nice little grid with the select results. The same is true in SQL Server 2000. One thing you cannot do is update a value in that result set, which WAS something you could do in SQL Server 7. If you try it in EM 2000, you get the error message "TRANSACTION CANNOT BE STARTED WHILE IN FIREHOSE MODE". ???????
Am I just missing something, or was Microsoft so worked up about putting XML into their product, they overlooked some of the simple things that were really appreciated (and sorely missed).
If anyone can provide some insight, it would be appreciated.
Thank You
Can the SQL 2000 Enterprise Manager be successfully installed and utilised on a pc that currently has SQL 7 and is used to administer other SQL 7 servers? Can the SQL 2000 Enterprise Manager be used to administer SQL 7?
Thanks.
Can you have MS SQL Enterprise Manager 7.0 and 2000 on the same computer? If so, are there any special steps involved?
Thanks,
Dave
Hi guys,
I want to give someone read only permission to our SQL server so they can log in and look at the database structure and query a few tables. I've set up the user but the problem is that when I connect in SQL server remotley, it shows all the other DB's on the server even though it is restricting access to them. Can these other DB's be hidden so that only the DB the user has access to shows up?
Cheers for your help!
Is it possible to connect to a SQL Server 7 remotely from a SQL 2000 Enterprise Manager. I have been given the alias config from my web hosting service but no joy on the connection.
Thanks
Anthony
Hello All.
I have been using my SQL 2000 Enterprise Manager for many months but it suddenly stopped working. I have uninstalled and reinstalled the software 3 times and it is still not working. When I double click on Enterprise Manager, it doesn't run. Query Analyzer works fine.
I am on Windows XP. No change in system configuration recently or any s/w upgrade, etc.
Any advise?
Thank you.
Best regards
Teck Boon
I've searched around google & here and can't find a solution.
I can connect to my database via a connection string on the web server
but cannot connect via Enterprise Manager or just by ODBC connection on
my local machine.
I can ping the server fine and switched off my XP firewall & my router firewall, port 1433 is also open.
Someone has tested this from another machine and it works fine (cheers).
What else can I try, this is driving me insane!
Thanks in advance
R
p.s I'm on Win XP SP2, SQL Server 2000 sp3a
Hi,
I have a user who has created several SQL7 databases and uses a VB app which schedules jobs (under the sa account) on the SQL server. How can I allow this user to view scheduled jobs on the server ? I don't want to give him too many priviledges.
Thanks,
Tim
We just installed an application, WhatsUpGold, to monitor our servers. Management won't let me host that on my primary SQL box. So, we are using MSDE on the local machine (call that box my_netmon).
I can access the db with very basic functionality using osql while on the my_netmon machine. I've added my domain user account as a System Admin using the following commands.
exec sp_grantlogin @name
go
exec sp_addsrvrolemember @name, 'sysadmin'
But when I go to the my_sql machine and try to attach to it with Enterprise Manager I get an error that the server does not exist.
What gives??? Is it just not possible, or am I missing something here?
My goal is to just be able to see the data stored in the MSDE db. Write views, etc...
Please advise,
Marc
Hi,I currently (for a hobby project) am unable to use SQL Server 2005, and rather am stuck with 2000. Since the way diagrams are handled changed, the tool for 2005 doesn't allow for the creation of diagrams when using it for 2000 (work sweet for everything else though!).I do not have access to a developer version of SQL Server 2000's tools, and thus no Enterprise Manager, leading me to my question: Are there any free utilities to replace this functionality? I don't have MS Access or Visio or anything like that unfortunately :(
View 3 Replies View RelatedI've installed the client tools on my notebook, and EM normally works properly. However, sometimes Enterprise Manager will crash on me for no obvious reason(it generates errors, but this takes forever, so i kill it). It is not consistent, nor can I reproduce the error, but it happens about once a day, never at the same time. Anyone else see this? My pc has win2K professional on it.
View 1 Replies View RelatedI had a problem today where I could not see column names and alltables had a _1 after them when viewing a Sql Server view inEnterprise Managere.g.TableName Company when added to the view would be named Company_1 andthe only columns available were 1 which was *(All Columns)After looking through the news groups I saw several occurrences ofthis problem but no answers that gave a fixAfter some investigation I found that it is caused when the databasename in SqlServer has a . in it!Test1 >> Fine the view designer works fineTest1.6 >> Problems as listed aboveI don't see why Enterprise Manager allows database names with .'s ifit is going to create such problems.
View 1 Replies View Related
Hi Guys
wondering if you can help me.
Im having an issue with SQL Server Enterprise manager. I cannot access an MSDE DESKTOP SQL Server 2000 installation that is on the same machine as enterprise manager.
I can access the MSDE Databae from another machine fine, but when I try to register that DB locally in Enterprise manager I get this error.
PC007 - Data source name not found and no default driver specified.
I had to install sqlserver 2000 using k=dbg and skip the MDAC install as it was giving me an install error but this shouldnt have mattered as I am running XP SP2 and it has MDAC 2.8 installed by default.
Any Ideas?
When Trying to register a SQL Server using Windows Authentication, I get the following error:
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
When I edit the properties and make it SQL Authentication, it works fine. The SQL Server Service is starting up with a domain user account. If that makes any difference. Funny thing is, that my co-worker, can register the SQL Server in his Enterprise Manager using Windows Authentication. We are both Domain Admins and members of the servers local admin group. So, I'm not sure what to do now.
I checked under Security, Logins...and neither of us are listed under there.
Thanks
I can€™t use the DTS editor because shows an error.
So, I want to reinstall the enterprise manager without uninstall the sql server 2000, Is that possible?
If the answer is yes, How can I do that?
I think that reinstalling only the Enterprise Manager the DTS editor can be fixed.
Sql Version: Sql Server 2000
SO: Windows 2003 Server
Tanks in advance
Ariel.
After installing DTS designer tools for SSIS/Visual studio,
I can no longer open enterprise manager and get the following error:
mmc.exe - entry point not found
The procedure entry poinst ?ProcessExecute@@YAXPAUXHWND_@@PBG1@Z could not be located in the dynamic link library SEMSFC.dll.
Something happened when the server fall down because of no disk space.
Now everything is fine but I have a problem in de DTS (from the Enterprise Manager) editor, I can€™t run, modify and even make a new DTS.
What can I do? Is it possible reinstall de DTS components without reinstall sqlserver 2000?
Sql Version: sqlserver2000 Enterprise
SO Version: Windows 2003 Server
Thanks in advance
Ariel.
After running virus cleaning software on my HD, I suddenly find my Enterprise Manager snap-in missing and fail to initialize. Is the MMC erased or damaged? What should I do? Reinstall SQL Server 2000 or repair it? Please advise. Thanks.
View 3 Replies View RelatedHi,
We patched our servers last week and now, when connecting to our server remotely via Enterprise Manager (with DBO permissions), the management folder shows as empty. My guess is its permission related but, I'm not sure where to begin to correct the issue since we aren’t sure how it happened. Any help will be greatly appreciated.
~des
Hello,
Yesterday I was in SQL Server 2000 Enterprise Manager and it got hung up. I couldn't get out of it without rebooting my machine. When I tried to enter Enterprise Manager again, I got an error message "MMC Cannot Open The Selected File". So I completly shut down my machine and then started it back up, but still go the same message. I stopped the services and then rebooted again,but no luck either. Today, I still cannot open Enterprise Manager. Has anyone experienced this and worked through it? I am debating as to whether or not I should uninstall SQL Server 2000 and reinstall it? Any advice?
Thanks
Heather
I have had a problem with Enterprise Manager connecting to SQL Server. At first this problem was experienced with one particular network user... whichever PC he logged onto, Enterprise Manager took ages to connect to SQL Server and every operation was painfully slow. Creating a new Windows NT logon fixed the problem.
I now have this same problem but only on my PC. It doesn't matter which Windows NT logon I use, using Enterprise Manager is painfully slow. I've tried creating a new Windows NT profile, checking the hard drive for errors, defragmenting the disk, reinstalling Enterprise Manager etc but nothing works.
What is strange is that connections from VB applications on my PC are fast. It is only Enterprise Manager that is slow.
I am using the latest service pack for SQL Server.
I thought it could be a problem with the Enterprise Manager registry values but don't want to start messing with them!
Has anyone else experienced this problem? Any advice would be great as I can't find any help from microsoft other than installing the latest service pack for SQL Server.
Thanks
Hi,How to add a foreign key constraint using the SQL server 2000enterprise manager?Not by SQL.thanks
View 3 Replies View RelatedHello,I need some help with SQL Server 2000 SP4. I've been using thedeveloper product for a few years now on my PC with very few problems.Today when I try to start up Enterprise Manager, it crashesimmediately. I get the usual "Please tell Microsoft about this problem"dialog and if I click the 'click here' link, I'm presented with adialog that says:-------------------------------------------------Error signatureAppName: mmc.exe AppVer: 5.1.2600.2180 ModName: mmc.exeModVer: 5.1.2600.2180 Offset:0001f07eReporting detailsThis error report includes: blah, blah, blah...-------------------------------------------------I am running Windows XP with SP2. Also installed is Visual Studio 2003,Visual Studio 2005, and SQLServer 2005 (We're in the process ofmigration).All of these products have been running OK together for at least amonth until today. I'm not sure what changed, but obviously somethinghas. I tried uninstalling and reinstalling SQLServer 2000 & it's SP4,but no luck. Enterprise Manager still crashes immediately when I try tolaunch it.Could somebody please help me out?Thanks.
View 1 Replies View RelatedHi all,I need to gain access to a remote SQL Server 2000 storing my data.The remote SQL machine can only be accessed via an internet connection,that is - it is not part of my network.I know Enterprise Manager can do the job, but EM only comes bundled inMS SQL Server, which is not installed on the client machine.Please let me know which other (preferably free) tools can performsuch remote access.Thanks,Gilad Haimov
View 1 Replies View RelatedCan anyone tell me if there's a way to create new windows from thetables section of a database in Enterprise Manager such that I canlimit the tables included in that window? Ultimately, I'm looking fora solution whereby I can group tables, stored procedures, etc. intological groups that can then be displayed using different MMCconsoles. I'm looking for either a GUI-level or programatic approach.Thank you,Dax Westerman
View 1 Replies View RelatedI am working on a site's SQL Server 2000 database on a W2k3 machine . I went into Enterprise Manager and saw that their database resides on a named instance. I did not see the default instance listed so I registered that using windows authentication. I noticed that the default instance had a user database that had the same name as the user database on the named instance that I was to work on. I looked at the properties of the databases and saw that on both the default and named instances of SQL Server that the Data Files and Log Files for the user database point to the same location.
Is this a problem? Can anyone see any issues with this? Does this mean that someone can simply connect to the named or the default instance of the SQL Server and connect to the same database?
Kirk
hello,all
I am new to Sql 2000,I installed sql 2000 database in C disk,but Now I found my C disk space is smaller than before,So I want to move my databse(include data and structure) from C Disk to D Disk(its space is very large) .
is it possible to do it ?
if its can be done ,do I need to change my asp.net program source code (exp: chaneg my crystal report connectstring ) ?
thanks in advanced!