I keep receiving an update notification for KB 932557 and when I try to apply the fix, it fails. Checking update history tells me error code 0x2c24 is the reason for failure.
I cannot find any help on this error code anywhere.
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Hi. I am stuck with error: An error occurred while receiving data: '64(error not found)'. My Service Broker configuration: Server A initiator, Server B target. Server A sends message to Server B, Server B sends back reply. On this stage I receive problem. Server B message does not come to server A. It stays on sys.transmission_queue on server B. This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B. So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™. But, whenever I send messages after that, everything works fine.
i get this error when i try to connect to sql server 2005 developer edition with the latest JDBC.
sql string =>> jdbc:sqlserver://localhost:1434;databaseName=c1 Elvis elvis SQL STATE: 08S01 ERROR CODE: 0 MESSAGE: An I/O error occurred while receiving the TDS prelogin response.
And the stacktrace is:
com.microsoft.sqlserver.jdbc.SQLServerException: An I/O error occurred while receiving the TDS prelogin response. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) at com.microsoft.sqlserver.jdbc.DBComms.Prelogin(Unknown Source) at com.microsoft.sqlserver.jdbc.DBComms.<init>(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(DriverManager.java:525) at java.sql.DriverManager.getConnection(DriverManager.java:171)
and is called :connection=DriverManager.getConnection(con, user, password);
Please tell me what is wrong ? Because in other part of the code it works fine !
What is this "I/O error occurred while receiving the TDS prelogin response" ?
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is: An error occurred while receiving data: '10054(error not found)'.
And on the other side its Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.
I first created up a User-Defined Table Type
My stored proc is as follows:
ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl] @MtlTblMaterialType READONLY AS BEGIN Set NOCOUNT ON;
I have the following query for my site which was functioning great using the OLEDB driver. Unfortunately, my client's web host forced us to use ODBC and it is no longer working Any suggestions for what I should do?
Here is the query: SELECT t.* FROM (SELECT TOP 10 itemnum, itemnum FROM ( SELECT TOP 100 itemnum, itemnum FROM(CatView) WHERE [CATALOG PAGE] LIKE 'SM%' ORDER BY itemnum ASC) AS foo ORDER BY itemnum DESC) AS bar INNER JOIN CatView AS t ON bar.itemnum = t.itemnum ORDER BY bar.itemnum;
Here is the error i'm now receiving:
ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] The specified field 'itemnum' could refer to more than one table listed in the FROM clause of your SQL statement. I know it was working great before, so i'm not sure what to do.
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
I have some VB.NET code to retrieve data from an SQL Server database and display it. The code is as follows: ------------------------------------------------------------------------------------------------------- sw_calendar = calendarAdapter.GetEventByID(cid) If sw_calendar.Rows.Count > 0 Then
lblStartDateText.Text = "*** Not Found ***" lblEndDateText.Text = "*** Not Found ***" lblTitleText.Text = "*** Not Found ***" lblLocationText.Text = "*** Not Found ***" lblDescriptionText.Text = "*** Not Found ***" End If ------------------------------------------------------------------------------------------------------- If all of the fields in the database has values, everything works ok. However, if the title, location or description fields have a null value, I receive the following error message: Unable to cast object of type 'System.DBNull' to type 'System.String'. I've tried a bunch of different things such as:
Adding ".ToString" to the database field, Seeing if the value is null: If sw_calendar(0).description = system.DBnull.value... ...but either I get syntax errors in the code, or if the syntax is ok, I still get the above error message. Can anyone help me with the code required to trap the null within the code example I've provided? I'm sure there are other, and better, ways to code this, but for now I'd really like to get it working as is, and then optimize the code once the application is working (...can you tell I have a tight deadline )
I am trying to run a stored procedure which retreives 3 lakhs of records and updates the data and moves few of those records to some tables. Since the number of records are more , the time taken for the storede procedure is around 30 minutes when i directly execute it in query analyzer.
But I need to execute it from Visula Studio.Net 2005 (c#). Whole of the application contains only one form with a single button.When I click on the button , this stored procure has to be executed. But I am getting an error as shown below. "A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)"
Database used is SqlServer 2000
How to solve this error?. Any ideas are really appreciated.
I downloaded this program, and when trying to intall I am receiving an error meesage that there is insufficient disk space to install.
I have 98GB available on C and 107 GB available on D. I am on an IBM Intellistation dual processor 3,08 Ghz with 4GB RAM and 240 GB Disk (those are "G"'s), so I have tons of capacity. This has to be a problem with the .msi - any suggestions?
Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Hi... I'm reading the MS Press 70-442 Self-Paced Training kit, and I'm having problems with this example. I'd like help getting it to work correctly, or understand why it is isn't working the way I planned.
On page 67, the lab is about the APPLY operator (CROSS APPLY and OUTER APPLY). I first have to input a sample table-valued function into the AdventureWorks database:
Code Block CREATE FUNCTION fnGetAvgCost(@ProdID int) RETURNS @RetTable TABLE (AvgCost money) AS BEGIN WITH Product(stdcost) AS ( SELECT avg(standardcost) as AvgCost FROM Production.ProductCostHistory WHERE ProductID = @ProdID ) INSERT INTO @RetTable SELECT * FROM Product RETURN END
and then run a sample T-SQL statement
Code Block SELECT p.Name, p.ProductNumber, Convert(varchar, cost.AvgCost,1) AS 'Average Cost' FROM Production.Product p CROSS APPLY fnGetAvgCost(p.ProductID) AS cost WHERE cost.AvgCost IS NOT NULL ORDER BY cost.AvgCost desc
My problem is with the WHERE clause... According to page 56, CROSS APPLY returns only rows from the outer table that produces a result set, so why do I need to explicitly filter NULL values?
When I remove the WHERE clause, the query retrieves lots of NULL AvgCost values.
Again, according to page 56, it is the OUTER APPLY that returns all rows that return a result set and will include NULL values in the columns that are returned from the table-valued function.
So, in short, I don't see the difference between CROSS APPLY and OUTER APPLY, using this example, when I remove the WHERE clause?
(Please refrain from introducing another example into this question.)
My acknowledgement messages are getting stuck in sys.transmission_queue. In profiler, the message generated by the target server (the one sending the ack) is:
This message could not be delivered because it is a duplicate.
The result of the function GET_TRANSMISSION_STATUS is
An error occurred while receiving data: '121(The semaphore timeout period has expired.)'.
Each time I send a new mesage I get one record in sys.conversation_endpoints and two in sys.transmission_queue. The two records in the transmission_queue are the same except one has a NULL for the message body and is_end_of_dialog=1
If I try to clean out the queues they re-populate (I guess becasue the initiator keeps re-trying the message?)
I have double checked my routes back to the initiator and they seem correct (see below). In fact, a second server is using an identical route and it is working OK.
The only thing tricky on this machine is added a second message queue for a differnet kind of message, and it is replying to a different service broker instance. In other words, on server A, database "Production" sends a message to server B, database "Destination" and Server A, database "Schedule" also sends a message to server B, database "Destination".
In the respective return routes I have double checked the guid for the broker_instance.
The broker_instance value in each return route is right out of server A's sys.databses view:
name service_broker_guid
------------------------------------------------------------------------------------------------- Production 3BE812A8-5212-45D2-8664-521F83689585
SELECT res.res_id, sub.value('(./@id)[1]', 'char(2)') id FROM vwResult res CROSS APPLY report.nodes('/clue_personal_auto/report/search_dataset/subjects/*') report(sub)
It works just fine in SQL Query.After placing this into a view in SSDT November 2012 update, I get a compilation error.
Thanks for your time: Form collects 30 different categories of data as 1 row into a table. Then this After Insert Trigger inserts unique rows into another table per "if logic statements" for each of the 30 scenarios (see examples below).
How do I BEST apply TryCatch and @@error feedback against the following to minimize risk of lost insert statements, AND LOG their details for follow-up:
tr_A_Form_I_ItemRows CREATE TRIGGER trg_insertItemRows ON dbo.A_Form AFTER INSERT AS IF ( @@ROWCOUNT = 0 ) RETURN SET NOCOUNT ON
-- 1 of 15 Checkbox Driven [Missing WORKSHEET is Valued]: IF (select distinct i.Fieldname from inserted i) = 1 BEGIN Insert into... Values(...) END
-- 1 of 8 Textbox Driven [REPLACE PATIENT NAME is valued]: IF (select distinct i.C_PtName from inserted i)IS NOT NULL BEGIN Insert into... Values(...) END
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
I installed Micrsoft Server Desktop Engine from the CD I received in my ASP.net book. The installation went fine and then I went to the DOS prompt and did the "setup SAPWD..." and it ran. I restarted my computer and opened ASP Matrix and went to the Data tab and proceed to connect to the server. It gave me an error message it couldn't connect.
So I uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went ahead and installed the MSDE again from the CD again and then went to DOS to do the setup. It ran through the setup until the very end with 11 seconds remaining and received error message " Setup failed to configure the server. Refer to the server error logs and setup logs for more information. I have tried it several times and it always stops around 11 seconds. I have tried to install the download from microsoft.com instead the CD and that didn't work also. So at this point I am stuck. PLEASE HELP!
I also checked my Registry keys for a file called PendingFileRenameOperations and it wasn't in the registry keys.
If anyone has any suggestions I would appreciate it.
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729 MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32 MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603 MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object. MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending. === Logging stopped: 4/24/2007 14:46:48 === MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603 === Verbose logging stopped: 4/24/2007 14:46:48 ===
Time: 04/24/2007 14:46:48.854 KB Number: KB921896 Machine: DUTTONDARRYL1 OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600) Package Language: 1033 (ENU) Package Platform: x86 Package SP Level: 2 Package Version: 3042 Command-line parameters specified: Cluster Installation: No
********************************************************************************** Prerequisites Check & Status SQLSupport: Failed
********************************************************************************** Products Detected Language Level Patch Level Platform Edition Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER SQL Server Native Client ENU 9.00.2047.00 x86 Client Components ENU SP1 9.1.2047 x86 DEVELOPER MSXML 6.0 Parser ENU 6.00.3890.0 x86 SQLXML4 ENU 9.00.2047.00 x86 Backward Compatibility ENU 8.05.1704 x86 Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.". Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.