Cannot Configure SQL Server Express 2005 For Remote Connections
Aug 15, 2006
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption.
<time> Server Error: 26024, Severity: 16, State: 1.
2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1.
<time> Server Error: 17826, Severity: 18, State: 3.
<time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
<time> Server Error: 17120, Severity: 16, State: 1.
<time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Any help is GREATLY appreciated!
Matt
View 15 Replies
ADVERTISEMENT
Nov 14, 2006
Hi there! I've been trying for several days now to configure SQL Server 2005 to allow remote connections, apparently, with no luck.
I always have this error message: Microsoft SQL Native Client: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I've followed the instructions at this link -> http://support.microsoft.com/?kbid=914277&SD=tech, but I have been having the same problems.
I've already adjusted my firewall settings.
What should I do?
Please help me...
View 2 Replies
View Related
Jan 17, 2007
Hello there,
I just deployed a new ASP.NET 2.0 website on a remote server http://www.alrazem.com/. and when i want to log on, or when any connection to the database happens!! the following error ocurs.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Anyways, I searched the new. and i found this link: http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277... I followed the instructions and changed the Surface Area Configuration for Services and Connections to Local and remote connections. and Applied both protocols. Then redeployed the application. but the error still ocurs.
I didn't restart my machine after changing the SQL to remote. but i did the website from scratch again. and created a new connectionstring and database!!!
Any help? Thanks!
View 1 Replies
View Related
Nov 13, 2007
Hi
As you know SQL Express by deefault accepts only local connections
For a particular requirement i have to change SQL Server Surface Area Configuration to accept remote connections by dos command
Anyone know this command?
thanks
Marco
View 16 Replies
View Related
Apr 19, 2008
hi,
could anyone guide me on how to allow, ceate rule for sql server 2005 remote connections to work. i already configured my sql server to allow remote connections and also my router, it is only in isa that is blocking the connections.
thanks
View 1 Replies
View Related
Nov 3, 2007
I already asked this question at the MSDN forums, but I'm asking it here because I got conflicting answers.
I want to configure my server to allow remote connections. For some unknown reason, I'm unable to do this with the Surface Configuration Tool. My understanding is that I can accomplish this using the sp_configure stored procedure. Is this correct? If so, can someone please give me an example of the correct syntax? BTW, I'm running SQL Server 2005 on winxp pro sp2.
Thanks in advance.
View 2 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Feb 27, 2006
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
Thanks.
View 27 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
May 3, 2007
Hi,
My Web Aplication read and write into a sql server express database. The database is in one server and the applicacion is running from my laptop.
Everything works well.
But if i publish the web in the same server that the sql server and getting the next error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
When am running the application from my laptop i am using the external IP and when I publish it in the same server i am changing the IP for the server name. The most interesting part is that the web can read but when it tries to insert is when am getting this error.
Any clue??' I can select, delete, insert using Microsoft SQl Server management Studio from my laptop, then the sql server accept remote connections.
I do not understand why the ASP.Net application works perfectly when runs from my computer but get this error when is publish in the server.
Any help will be more than appreciate.
Thanks in advance
View 8 Replies
View Related
Nov 15, 2007
Ok. Here is what I need to do: several computers on the intranet need to use a client program to access data from the server (a desktop)
Here is what is going on:
1. I am using Visual Studio 2005 c#.net 2.0
2. Sql Server Express 2005
3. I don't have IIS set up
4. The database is being shared from the c drive on the server (not sophisticated at all, but this is a one man operation!)
Questions:
1. Is IIS an absolute must to make this happen?
2. If not, a user pointed out that I can't use UNF to access the database. How do I set up the connection string to access the db on the server?
This is my basic connection string (local)
connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:MonzaDBMonzaDB.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True;Asynchronous Processing=true"
Thanks for any help on this subject. I know basically nothing about NETWORK programming and database administration!
View 4 Replies
View Related
Jul 6, 2006
My target market includes Micro-SMEs (i.e. 1 to 2 person business). This users often have multiple computers, but tend to run XP Home edition. Hence I need to set up a SQL Server Express on one of the machines and allow the other machines to access it.
So far I realise:
XP machines must be SP2ed (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=379560&SiteID=1)
XP Home machines need to be in the same work group (am I right?)
I have to Open up the MS Firewall on each of the machines for TCP ports 1433 and 1434 (see http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
On the machine hosting the SQL Server Express instance, start the "Browser" Service (again http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
I have several questions surrounding this.....
If I package SQL Express with my application is there away I can get the Browser to be started automatically? Do I need to write some custom code using the Microsoft.SqlServer.Management namespace?
My understanding of the SQL Server security model is that ideally I should ideally use Windows Authenticated users connections - how do I set up the remote XP Home user on the XP Home machine which is hosting the SQL Server Instance? I'm thing I may have to used Mixed Mode and pass the SQL Server username and password in the connection string. Am I right or can I use Windows Authenticated?
Are there any more resources other than http://msdn.microsoft.com/sql/express/default.aspx?pull=/library/en-us/dnsse/html/emsqlexcustapp.asp which I should look at for help on installing an app bound to SQL Server Express?
Thanks in advance
Ben
View 4 Replies
View Related
Mar 5, 2008
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
View 10 Replies
View Related
Sep 3, 2007
Hello,
I have SQL Server 2005 express loaded on my webserver and I have loaded
SQL server studio manager on another terminal. When I try to
connect to the SQL Server it tells me that i can't and because the SQL
server does not allow remote connections. How do I fix that?
View 2 Replies
View Related
Sep 8, 2007
got the following error in my site. am using visual studio 2005 vb.net sql server 2005. my webhost (philhost.net) said that they support mssql server 2005. please help
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 16: Dim myConnection As New SqlConnection(strConnString)Line 17: Line 18: myConnection.Open()Line 19: Line 20: Dim myTrans=myConnection.BeginTransaction()Source File: E:inetpubvhosts\httpdocsDefault.aspx.vb Line: 18 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 _Default.Button1_Click(Object sender, EventArgs e) in E:inetpubvhostshttpdocsDefault.aspx.vb:18 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 11 Replies
View Related
Feb 6, 2007
Snehalata writes "i have one database at sql server 2000 and i have one database at sql server 2005. now i have added linked server to sql server 2005. i wish to access database located at sql server 2000 from sql server 2005 by creating a view in database located at sql server 2005. but when i access database located at sql server 2000 from sql server 2005 i get error message
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
wat should be done?
its urgent"
View 1 Replies
View Related
Oct 11, 2006
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
View 1 Replies
View Related
Nov 23, 2006
I use ASP.NET 2.0 and VS.NET 2005.
I have the following expression in my code:
string connectionString = "server='localhost'; user id='sa'; password=''; Database='Northwind'";
When I executed the code I have the following error message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)."
The Microsoft Access was successfully connected in the Server Explorer window.
How do I solve this problem?
Thanks,
Andy.
View 3 Replies
View Related
Sep 27, 2007
PROBLEM:
SQL 2005 rejects connection from an ASP.net test webpage (shown below).
CONFIGURATION:
Internet > Concast Cable > Router > Sever01 Nic1 > Server01 SBS 2003 & SQL 2005 > Sever01 Nic2 > Switch > Local Area
Linksys Router WRV54G( Firmware Version: 2.39.2): Port Range Forwarding TCP 1433 and UDP 1434
Small Business Server 2003 Premium (Server Name: Server01)
Two network cards: Internet Ionnection and Local Area Network
Ran: Configure E-mail And Internet Connection Wizzard
Ran: Remote Access Wizzard (disables access to Windows Firewall)
Note: Remote workplace, Outlook Web Access, Sharepoint, etc, on ports 443,444, 3389, 4125 All work remotely - so Linksys router and RRAS port settings are working.
Routing And Remote Access(RRAS) >NAT/Basic Firewall > Internet Ionnection > Services And Ports
Added TCP Incoming Port 1433, Private Address 127.0.0.1, Outgoing Port 1433
Added UDP Incoming Port 1434, Private Address 127.0.0.1, Outgoing Port 1434
SQL Server 2005 Standard Edition version 9.0.3042 (installed on same machine, default instance ID MSSQLSERVER)
By default: TCP protocol is enabled and local remote connections are enabled on standard Edition. Also by default: MSSQLSERVER automatic/started/running and SQL Server Browser automatic/started/running
Ran: SQL Server 2005 Surface Area Configuration to confirm MSSQLSERVER instance settings are running.
Using: SQL Server Authentication: Login and Password
"sa" is a default account that works locally.
SQL Server Configuration Manager:
MSSQLSERVER protocols: Share Memory and TCP/IP enabled
TCP port 1433 by default (confirmed listening by ERRORLOG)
Microsoft SQL Server Management Studio
Database Engine lists SERVER01 (instead of SERVER01MSSQLSERVER - the default instance is not named explicitly)
Created database "Test" under SERVER01 > Databases.
Created table "tblCategories" in "Test" (included some fields and data)
Server-Side Successful?
netstat -ano | findstr 1433
TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2004
Client-Side
Ping Successful
ping <xxx.xxx.xxx.xxx>
Telnet Successful (blank screen)
telnet <xxx.xxx.xxx.xxx> <port#>
TEST ASP.net Web Page Button Sub
I have this button on a page at Godaddy.com connecting to an instance of MS SQL provided by Godaddy and there is no problem connecting to that SQL Server.
Public Sub TestSQL_Click(Sender As Object, e As EventArgs)
Dim rdr As SqlDataReader = Nothing
Dim conn As SqlConnection = new SqlConnection("Data Source=tcp:xxx.xxx.xxx.xxx; Initial Catalog=Server01 blCategories; User ID=sa; Password=xxx")
conn.Open()
Dim cmd As SqlCommand = new SqlCommand("SELECT Category FROM tblCategories;", conn)
rdr = cmd.ExecuteReader()
rdr.Close()
conn.Close()
End Sub
ERROR:
The follworing error occurs or variations of it depending on different connection string configurations:
Occurs at: conn.Open()
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
THOUGHTS
Possibly a bad connection string or Microsoft security issue.
I've attempted many other connection string formats such as:
Dim conn As SqlConnection = new SqlConnection("Data Source=xxx.xxx.xxx.xxx,1433;
Network Library=DBMSSOCN; Initial Catalog=Server01Test; User ID=sa; Password=xxx")
But I continue to receive connection failure messages (or invalid connection string errors for incorrectly formed connection strings).
I've tried disabling RRAS and Windows Firewall and the same errors resulted.
Any feedback would be appreciated.
View 29 Replies
View Related
Aug 23, 2006
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
View 25 Replies
View Related
May 10, 2007
After applying the changes mentioned in KB 914277 to allow remote connections, while working in Visual Studio 2005, I'm now getting an error with the number 26: Error locating server/Instance specified...
Sure wish I knew what remote means in this scenario, as there is nothing "remote" about my installation. I only have 1 computer, the one i'm working on, where SQL Server and Visual Studio are installed, and no networks involved, so what is remote?
Any help would be appreciated!!
View 7 Replies
View Related
Feb 12, 2007
I have a problem. I am using the developers version of SQL Server Enterprise edition.
I am trying to run a command in MS command prompt:
Aspnet_regsql -E -S localhost -ssadd -sstype p
After I execute this command, I receive a Name Pipe
error that under the default settings, SQL Server
doesn't allow remote connections. I took some steps
to try to resolve the problem:
1) I googled the interrnet to see if there was any one
else who ran into the same problem and if there was a
quick resolution.
2) I check SQL Server Books on line about SQL server
configuration manager and how to enable remote
connections using Name Pipes and TCP/IP.
3) I used C:WINDOWSsystem32cliconfg.exe to enable
Name Pipes and TCPIP to be enable on the client.
4) I enabled SQl Server Browser to help me with my
problem
5) I stopped the Database engine, enable local and
remote connections using Name pipes and TCP/IP,then I
restarted the database engine along with SQl server
Agent.
6) I did check SQl Server error logs to see what port
it was listening on , but I thought that SQl Server
was suppose to listen on port 1433 by default, and
Name pipes /SQL/query.
7)I have check the error logs to see what port that SQL Server was listening to
and trying to use the port number in the client config utility. I am still getting the same error.
8) I tried to remove name pipes in the SQL Server Surface Manager and allow local and remote connections using only TCP/IP. I still get the same error. I did stop and restarted the Database Engine.
What steps have I not taken , and what should I do to correct this problem?
View 7 Replies
View Related
May 9, 2008
I am running a standalone WinXP SP2 system with VS 8 and SS 5 Express on it. I have been working very nicely with VB and SSCE, but I want to learn to use Sql Server 5 Express, which I also have on my system from a prior install of VS 5. I am strictly doing this as a learning experience on my own.
I have been trying to install the NW sample database into SS 5 Ex, but it is obviously not configured properly, because I am getting errors stating that the scripts cannot install because they cannot establish a remote connection to SS. So I looked up the FAQ item here on setting up for remote connections (which I am not even sure applies for a standalone system like mine). Anyway, I followed the instructions in the FAQ, using the SAC util to configure for remote connections, but it does not work. Every time I try to start the DB engine, it fails with the following message:
When trying to start Database Engine when configuiriung for remote connections in SAC:
"TITLE: Surface Area Configuration
------------------------------
The service did not respond to the start or control request in a timely fashion, you need
administrator privileges to be able to start/stop this service. (SQLSAC)
Now, I am the admin user on the PC but OK, so I selected the SAC option to set myself as SSadmin, even though this option is supposedly only for Vista users according to the dialog. Anyway, it does not allow me to set myself as SSAdmin, it returns the following error:
When trying to add myself to SQLSAC, even though it is for Vista:
"TITLE: .Net SqlClient Data Provider
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL
Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open
a connection to SQL Server)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtI
D=2&LinkId=20476"
(which help link is no help BTW, because it is not valid). And the setting does not get set, because the next time I open that dialog, I am back to being a non-admin user.
So what is the solution here? Am I going to be able to use SS 5 Ex on my PC? No matter which connection option I select, either local only, or for any of the remote options, I cannot get it to work. Am I supposed to reboot my PC after changing a setting? Or is it just not possible to run SS 5 Ex on a standalone PC like mine?
Or worse, are there a bunch of other configuration settings I must change as well? I note that, when I look in the SS Config Manager at the properties for SS Express, I see that it shows the logon option that uses the built-in account "Network Service"rather than Local System or Local Service; is that correct? BTW the browser is always running in all this.
As you may gather, I know zip nada about SS, but I am an experienced VB/VBA/VC+/FP programmer of many years, did desktop Access databases w/VB6 frontends for a lot of customers, so I am familiar with DB design etc. I just know next to nothing about backend stuff like this, other than a little with BTrieve years ago.
Any help appreciated
Pete B
.
View 1 Replies
View Related
Jan 22, 2008
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
View 8 Replies
View Related
Sep 13, 2006
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Sep 1, 2006
I have an application that will deployed on LANS running 1- 10 systems on average.
The front end is C#.net 2.0 and the backend will be sql express.
I need to enable remote connections by default because 99.5% of our customers have 2 or more computers.
I have two questions:
1) How do I enabled remote access during installation? Can I run the sqlExpress install silently and turn this on so that my users (who are very non-technical) do not have to go into surface configuration and turn on network access?
2) If I already have sql express installed (like on my development machine now) how do I enable remote access via a command line utility without having to run the surface configuration tool? I want to be able to execute a command to turn on network access so my users don't have to go to a GUI tool(Surface area configuration) and turn it on themselves. Can I use sqlcmd to turn on network access or some other command line utility that I can execute easily. Perhaps there is some type of .NET assembly that I can reference from within my C#.net application that will allow me to enable remote access? Basically How do i take care of this without making my users have to do it?
thanks in advance
View 3 Replies
View Related
May 7, 2007
Hi,
I'm having problems getting a remote connection to sql server express.
The application connects fine on the local PC (using SQL server authentication), however a networked laptop cannot connect to sql.
The PC/Laptop have been networked using the network wizard, and files on the PC are accesible from the laptop.
tcp/ip is enabled on express and the browser service is running. All firewalls have been switched off.
Any ideas?
View 3 Replies
View Related
Sep 12, 2006
I am attempting to insert information from Visual Web Developer 2005 using either the Gridview or Datalist controls into a SQL Server 2005 database and get stuck when defining the custom statement.When I enter the text within the insert tab, the <next> button remains greyed out, preventing me from continuing to the next page.If I copy the same text into the select tab, then I can continue with the wizard, however this raises other problems which may or may not be related (multiple insertions of the data into the SQL Server database table - possibly due to postback functions). I would rather use insert to confirm that my second problem is not because I am using the wrong option.My question is:Should I be able to use the insert function within VWD express or is this only available within the standard/pro editions?
View 2 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Jan 24, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies
View Related
Aug 22, 2007
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
