Hello,
I install Cluster naming instance of MSSQL 2005 Enterprise edition with SP2 and latest patch.
When I try connecting this instance from outside of the server by "server nameinstance name" I got connection error.
But when I connecting by "server name,port number" it's connecting with no problem.
Can someone help me resolve connection outside of the server with "server nameinstance name"?
Thanks
Hi all
SQL Server 2005 cluster. Active-Active. We want to create two instances. The two nodes are named:
mike-940-01
mike-940-02
I read somewhere that there can only be ONE default instance in a 2005 cluster. So I interpret that as meaning that I can only have one instance named after a virtual server (example: mike-940-03) and the other instance has to be a slashed instance (example: mike-940-03/instance1). But what if I create another virtual server (example: mike-940-04). Can I install a default instance in that server? Can someone help me clarify this?
Also, if I'm using all slashed instance names, then what does it choose as the base name before the slash? In other words, what decides which virtual server name is used? Is it the management node? Is it one of the nodes?
My objective is to keep consistency in the naming on the cluster. If I have to use slashed instances, then I want all sql server instances to have a slash.
Sorry about the confusing explanation, but that's probably a symptom of MY confusion.
Thanks!
I'm new to SQL Server and just installed VS 2005 and SQL Server 2005 Express. My question is, is there any naming rules for an instance? When I open Express Manager it is asking me to enter an Instance name. Thanks for any suggestions or help,
View 2 Replies View RelatedHi,
I am trying to remotely connect to a SQL 2005 Instance on a cluster. I see the following error:
No retry on exception System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have enabled TCP/IP , Named Pipes on the node. I have turned off IPSec on the clients as well. I am using the following connection string : "Integrated Security=SSPI;server=servernameinstancename;Pooling=false;database=TrialDB"
Is there something I am missing?
Any pointers will be appreiciated.
thanks.
I understand most of the concepts for the Active/active setup. I am setting up a 2 node cluster. My question is can I use the default instance name (one default instance name per group) when setting up each instance or do I have to use named instances . I am assuming that since each group is a virtual machine that I can get away with using the default instance, but I cant find any documentation to confirm my frequently wrong perceptions.
I want to set it up like this
Instance1 Group
Group resources
Default SQL Instance Name Installation
Preferred Owner Node1
Instance2 Group
Group resources
Default SQL Instance Name Installation
Preferred Owner Node2
Thanks
I installed SQL Server 2005 flawlessly yesterday. When login as "sa" through SQL Server Management Studio, I get an error message saying it cannot connect to my PC.
I checked the MSSQL Server Service. It is not started and cannot be started because it's looking for a path that does not exist!.
The folder in question is missing.
C:Program FilesMicrosoft SQL ServerMSSQL
The following folders do exist:
C:Program FilesMicrosoft SQL ServerMSSQL.1
C:Program FilesMicrosoft SQL ServerMSSQL.2
I initially suspected this problem was cause by a previous MSDE 2000 installation.
I uninstalled SQL Server 2005 & MSDE 2000.
I re-installed SQL Server 2005. Same problem.
I executed
http://support.microsoft.com/default.aspx/kb/320873
to make sure all registries are removed and manually deleted C:Program FilesMicrosoft SQL Server€™s content
Re-installed SQL Server 2005. Same problem.
I do not know what do in order to get SQL Server 2005 up & running.
All help is greatly appreciated.
Frank
When I try to Add New Item - Database in VS C# Express, I get "An error has occurred while establishing a conncection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)"
When I open the management studio, I can connect to a database named Dev, and when I try to "Browse for more" from the server selector combobox, it is the only one found. I believe "Dev" was my old MSDE name, although this is also what my "Computer Name" is set to. Unfortunetly the setup of SQL Express didn't ask me what to name my instance.
I thought maybe the SQL Server 2005 Express Toolkit installation didn't actually contain the server software, and only installed the tools, as during the installation the section where I select components only listed things like client tools and what not, with not mention of the server software.
So I thought maybe it didn't install the server, so I downloaded the server installation that is by itself, and installed it, this time I saw the check for hide advanced options, so I went through the advanced options this time. I've have been through this same setup before at work, and both times it has confused me. It seems very different from installing previous versions of SQL server.
Where I choose to create a new instance or upgrade, I choose to upgade, and it is not clear what I'm upgrading, the selector does not display instance names.
At another point it asks me about configuring it to use the Local service, local system, or network account. The documentation of how these differ is vauge. For example, the network account is described basically as "don't use this" without saying what it is.
I was accustomed to just a local account, and network account settings from previous versions, and network was always the logical choice for me to use intergrated security. I don't understand what the new catagories represent and what will be functionally different in the way I connect.
So I'm really confused, and getting back to the instance names. In the surface area configuration as well as the VS Express, it only sees the name as MSSQLSERVER
For example if I "add new connection" from database explorer and click advanced, the datasource drop down lists only ".MSSQLSERVER"
So I'm thoroughly confused at this point and not sure what to do.
OS: Windows 2003 Server Enterprise Edition
SQL Server: SQL Server 2005 Enterprise Edition (2 instances)
SQL Server : SQL Server 2000 Enterprise Edition ( 1 instance)
Problem:
2nd instance of sql server 2005 installed and service pack 2 applied
when using SS Mangement Studio I get the error:
Cannot connect to <ServerName>MSSQL2K5_2.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
Error Number: 10060
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Open MyComputer
Services & Applicaitons | Services
SQL SERVER (<SERVER NAME> MSSQL2K5) STARTED
SQL SERVER (<SERVER NAME> MSSQL2K5_2) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5_2) NOT STARTED
Application Event Log
SQLServerAgent could not be started (reason: Unable to connect to server 'BLUESTONEMSSQL2K5_2'; SQLServerAgent cannot start).
SOURCE: MSSQL%MSSQL2K5_2
Server is listening on [ 'any' <ipv4> 2777].
DAC is listening on [ 'any' <ipv4> 2778]
<SQL ERROR LOG> AND <APPLICATION EVENT LOG ENTRY>
The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service.
Error: 0x54b, state: 3.
Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos.
This is an informational message.
Further action is only required if Kerberos authentication is required by authentication policies.
CONFIGUATION MANGER
Alias is configured with correct port. (2777)
Protocol TCP/IP
I have installed SQL Server 2005 on two boxes and installed client tools only on my local machine.
I cannot connect to either machine.
I also have the "Error 26 problem - does not allow remote connection etc."
Of my two remote servers, one is virtual the other is not.
I cannot establish a connection through the "Microsoft SQL Server Management Studio" tool on my local machine using:
Severname: ServerNameInstanceName
Authentication: Either Windows or SQL Server
Eveything is enabled (TCPIP, Name Pipes), no firewall
SqlBrowser is running
I have SQL Server 2000 also installed on the same server machines and I am able to connect to this.
I tried using IP addresses and port numbers as follows (NB ServerName implies alias or ip address) and portnumbers I have tried are 1433 and 1766:
ServerName,portnumber
ServerNameInstanceName,portnumber
It either connects to the 2000 or gets the error 26 problem.
Any help would be appreciated.
Hi,
i have installed MS SQL Server Express 2005 on my local machine. Also the managment Studio. I can connect to the MS SQL Server Express 2005 with my c# programm and with the mangament studio.
I have in Windows/system32 the file ntwdblib.dll version 2000.80.2039.0. The TCP/IP and Ip Protocl are active. But i cant connect with php to the local MS SQL Server Express 2005.
My php code is:
mssql_connect('192.168.0.2,1433', 'martin', '');
I get the return code Warning: mssql_connect() [function.mssql-connect]: Unable to connect to server: 192.168.0.2,1433 in c:InetpubwwwrootProjekteSkriptemssql_connection.php on line 2
Does anyone know what i made wrong or i have forgotten?
mfg martin
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Hi:
I have a SQL 2005 instance (standard edition with sp2 on windows 2003 server) located on different domain.
I can connect to it by using sa only. I need to use SQL login.
I created another user called 'test' and granted with sysadmin server role, but I got following error:
Login failed for user 'test'. (Microsoft SQL Server, Error: 18456)
I searched on the internet two days with no luck.
Any idea?
Thanks in advance.
Theresa
I have about 4 SQL servers that have SQL2005 as the default instance and SQL2000 as a second instance. My problem is that I can not connect to the SQL2000 instances using the instance name. I can get to it using IP address and port number or if I set up an alias with IP and port number, but not by name (ie ServerNameSQL2000 which is how the instance was named). If the process is reversed (install SQL 2000 first and then SQL 2005) I can get to both instances using instance name.
I read something about if SQL2005 Browser service is running when SQL2000 service starts, the SQL2000 service won't listen for calls, but it was rather vague and I am not real sure if that is true. I am in the process of trying to test this to see if it is true, but due to the nature of the servers, I have to follow a process and it will take me a couple of days before I can test.
So I was hoping to find someone to deny or confirm this. Or who has had a similar issue and can shed some light on this for me. Thank you for you time. I appreciate it.
Jim Youmans
St Louis, MO
Hi,
I am struggling connection to a named instance of SQL 2000 (SP4) from another machine but without any success. I get an error message saying that the server does not exist or access is denied.
The security configuration in this named instance is the same as the default instance (also 2000) and the remote machine can connect to it successfully.
I also configured the aliases in Client Network Utility in the client machine and set the server (machine) name and the port number used by the instance - but no help.
I use osql and Query Analyzer to connect to it, but I cannot connect by any of them.
Connecting locally, in the machine where the instance is installed, is successful.
The same behaviour appears when I try to connect to another instance on the machine which is 2005.
Something with the named instance is problematic.
Any help?
I installed SQL 2005 Developer addition on my Vista laptop. When I open Management Studio to connect to the local instance of the DB, I get the error below. Why can't I access? Is there something with Vista that is prohibiting?
Thanks
TITLE: Microsoft SQL Server Management Studio
------------------------------
Login failed for user 'xxxx'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
Hello,
I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good.
I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in.
First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error:
"An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"
However, I went in to see what other services I could connect to, and here's the results:
Analysis Services : OK!
Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)"
SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider)
Integration Services : OK!
I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either.
I even turned off my windows firewall and still no luck connecting to my own.
So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong.
Any ideas?
Thanks!
i Update SQL Server 2005 SP1 to SQL Server 2005 SP2 but cannot connect SQL Server 2000 SP4. Please Help Me Please
===================================
Cannot connect to sia09-cxdb01cxdb01.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the
fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
Error Number: -1
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
DB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?
I have tried several approaches.
A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
C: I have also tried opening the Database, and back up file through Server Management Studio. without success.
D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.
I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.
Mark Roach
I have installed a SQL Server cluster recently.Noticed below errors logged in the error log. I understand that SPN is not getting registered, hence this error.What permissions SQL Server service account? Service account is admin in local nodes anyway.
"SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service.
This is an informational message. No user action is required.SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure. The logon atte
2015-06-12 18:11:06.970 Logon Error: 18452, Severity: 14, State: 1.
2015-06-12 18:11:06.970 Logon Login failed. The login is from an untrusted domain and cannot be used with Windows authentication "
Hi There
If i have a 2 node cluster running a single instance (default) and i want to add another instance to the cluster , can i install the second instance as a defualt instance ?
Since the cluster instances are referred to their virtual names/ip's and if i choose to intall the binaries of the second instance to a different location is this possible?
Since in theory you never have 2 default instances running on a single server but each within a virtual server?
Normally i install a named instance but do i have to ?
Thanx
We have an active/active two-node QA cluster with four instances of sql. I need to add a fifth. In the past I always moved existing instances to the other node while installing a new instance.
Other than impacts to users from install reboots, is that a hard requirement?
QA is reluctant to have me put the four existing instances on one node for most of a day, fearing big performance slowdowns. Each node has 250GB of memory and each instance is allowed 50GB. Netapp disk backend.
Hi all,
Newbi to sql clustering.
I have a sql server 2005 standard edition with Active/Passive Cluster in production.
I have a new requirement where i need to create a new instance on this active/passive cluster that can be used by our sharepoint servers. Can somebody please let me know what are the steps that i need to follow like
1.What i need to ask my network admin?
2.How i need to proceed installing?
I am planing to do this over the weekend where i have the liberty of some down time.
Any help greatly appreciated
Thanks
I am looking for a best practice or any suugestion on the best way to install an additional Sql 2005 instance in a cluster environment. We have a production environment that is active/active/passive and need to install an additional instance with a little impact to the current production instances as possible. Ant suggestions or articles I can review?
View 1 Replies View RelatedI have a SQL 2008 R2 2 node cluster. For DR testing, I need to restore an instance on a new server (completely isolated). The existing instance runs on what I would call an alias. The actual cluster host name is SQLPROD (cluster nodes are SQL01 and SQL02). The instance runs on server SQLPROD-APPLE. The instance is called APPLE. In production, I use SQL Management Studio and I connect to SQLPROD-APPLEAPPLE.
I've setup a new VM to run SQL. Not a cluster. Host name is SQLREC. The new Vm has all the IP addresses that were on the cluster and the DNS for all the aliases are correct. I've installed instance APPLE. I created an alias called SQLPROD-APPLE. When I try to open SQL Management Studio and connect, I can't connect to SQLPROD-APPLEAPPLE. I can connect to localhostAPPLE, SQLRECAPPLE, 192.168.168.50APPLE.
When I attempt to connect to the alias I get error 18452. Pinging the alias resolves correctly. I haven't gotten to the database restore yet, so that's not a concern. I'm just trying to validate the connection first with the correct server and instance names.
I'm using Windows Authentication.
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
After imaging two systems to larger hard drives I managed several ~ (8.3 path names although NTFS file systems) in a few registry sql directory references. After trying about everything under the sun (yes a registry bonsai too) I'm stuck with error "A strong SA password is required for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit." When trying to reinstall MSDE SDK, even with the latest MSDERelA install.
Can't run a script to add database files to partially existing instance, completely uninstall or install.
Minimum 6 hr rebuilds on each system. Any ideas?
Joe
Here is a simple question. I am having difficulty accessing booksonline at Microsoft so I thought I would ask here. What is thestandard naming syntax for Sqlserver 2005? Assuming I had thefollowing table, [proddb01].[details].[dbo].[daily_tranx], how would Irefer to it in the new version?Thanks a lot!
View 5 Replies View RelatedI have a system running a sql 2000 instance w/ multiple databases located in a SAN. I would like to cluster my SQL 2000 environment on the same system. Can I do this without reinstalling another database instance? Can I put my current default instance and put it to my virtual server instance? Help is really appreciated. Any tips and links can be helpful to me.
View 3 Replies View RelatedHaving problems running the BPA for 2012. We setup using a clustered environment, SQL Server installed using default instance, and a static port not 1433. When I try to run the BPA using the instance name it says it doesn't exist, and won't let me add a port number. However, if I use MSSQLSERVER as the instance name it runs with no port specified and returns results. I assume that it doesn't require a port because the default instance would pull from the Browser Service and the using MSSQLSERVER is the same as running the default on a standalone server. Are those assumptions correct?
View 2 Replies View Related
Hey,
I have a 3 node cluster running 6 instances of SQL Server, I want to install Analysis Services along side of one of the SQL 2005 instances. Thus one of the cluster instances would host SQL Server DB, Analysis Services and SQL Agent. Is this possible or does Analysis Services need it's own Cluster Instance.
Thanks!
I've a fresh installation of SQL Server 2014 Enterprise on Windows Server 2012R2. I've setup de Windows Server Failover Cluster and the validation test has been successfully passed. I use mountpoint so I've disk M: that is the host drive for mounted volume m:Isql2014A that is the base folder for mounted volume
On that folder I've 5 mountpoint:
1) m:isql2014a empdbdata
2) m:isql2014a empdblog
3) m:isql2014auserdata
4) m:isql2014auserlog
5) m:isql2014auserlog
into these 5 mountpoint I've placed the SQL Server files.
After the installation of the first FCI I've re-run the cluster validation wizard and again it has passed successfully. When I try to failover the instance from one node to the other I have 2 problem:
1) every time I do failover, some disks fail to come online for a while and then succeed :
Cluster resource 'CLD - IstA - TempDB Data' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').
2) sometimes the SQL Server service fails to start, in the error log I see that the master database is not accessible. The master database in into the m:isql2014abinbackup.