Dear All,
We had changed the IP address of our SQL Database server(include the Report Server).
After we finished this, we restarted the server, but now, we cannot connect to the Report instance, database instance have no problem.
How to fix it?
Thank you.
Jeffers
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
Hi All,
I have two drive, C and D. When first time I installed SQL Server 2005, I think that I point to C drive which is having only 10 GB, instead of drive D which has bigger space. Now, I have a problem of restoring my database due to lack of space on my C drive. Can anyone guide me to change the instance of database from drive C to drive D.
TIA
Hi,
I have installed SQL Server 2005 Express Edition on my system. The default instance name is set as SQLEXPRESS. I want to change this to something else. Is there anyway I can do that?
Thanks,
pravi
Currently we have SQL instance on C: Â drive.We are now going to upgrade SQL Server 2008 RTM to SQL 2008 SP4.Can we change the path of SQL instance during upgrade?What services need to be stopped during upgrade.
View 2 Replies View Related
OS: Windows 2003 Server Enterprise Edition
SQL Server: SQL Server 2005 Enterprise Edition (2 instances)
SQL Server : SQL Server 2000 Enterprise Edition ( 1 instance)
Problem:
2nd instance of sql server 2005 installed and service pack 2 applied
when using SS Mangement Studio I get the error:
Cannot connect to <ServerName>MSSQL2K5_2.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
Error Number: 10060
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Open MyComputer
Services & Applicaitons | Services
SQL SERVER (<SERVER NAME> MSSQL2K5) STARTED
SQL SERVER (<SERVER NAME> MSSQL2K5_2) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5) STARTED
SQL AGENT (<SERVER NAME> MSSQL2K5_2) NOT STARTED
Application Event Log
SQLServerAgent could not be started (reason: Unable to connect to server 'BLUESTONEMSSQL2K5_2'; SQLServerAgent cannot start).
SOURCE: MSSQL%MSSQL2K5_2
Server is listening on [ 'any' <ipv4> 2777].
DAC is listening on [ 'any' <ipv4> 2778]
<SQL ERROR LOG> AND <APPLICATION EVENT LOG ENTRY>
The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service.
Error: 0x54b, state: 3.
Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos.
This is an informational message.
Further action is only required if Kerberos authentication is required by authentication policies.
CONFIGUATION MANGER
Alias is configured with correct port. (2777)
Protocol TCP/IP
TITLE: Connect to Server
------------------------------
Cannot connect to sia09-cxdb01cxdb01.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Hello,
I've a simple 2 nodes clusters active/passive with SQL2005SP2, using a named instance.
I can access from a remote workstation using <servername>,Port# but not <servername><instance>
Any idea why?
SQLBrowser is running and protocol is enable.
If starting sqlbrowser.exe -c I see the request but there don't seem to be any response.
Thank
ML
I have installed SQL Server 2005 on two boxes and installed client tools only on my local machine.
I cannot connect to either machine.
I also have the "Error 26 problem - does not allow remote connection etc."
Of my two remote servers, one is virtual the other is not.
I cannot establish a connection through the "Microsoft SQL Server Management Studio" tool on my local machine using:
Severname: ServerNameInstanceName
Authentication: Either Windows or SQL Server
Eveything is enabled (TCPIP, Name Pipes), no firewall
SqlBrowser is running
I have SQL Server 2000 also installed on the same server machines and I am able to connect to this.
I tried using IP addresses and port numbers as follows (NB ServerName implies alias or ip address) and portnumbers I have tried are 1433 and 1766:
ServerName,portnumber
ServerNameInstanceName,portnumber
It either connects to the 2000 or gets the error 26 problem.
Any help would be appreciated.
Hi:
I have a SQL 2005 instance (standard edition with sp2 on windows 2003 server) located on different domain.
I can connect to it by using sa only. I need to use SQL login.
I created another user called 'test' and granted with sysadmin server role, but I got following error:
Login failed for user 'test'. (Microsoft SQL Server, Error: 18456)
I searched on the internet two days with no luck.
Any idea?
Thanks in advance.
Theresa
I installed SQL Server Express and SQL Server manager, then tried to start manager. SQL Service is running, but SQL Manager attempt to connect to SQL Server instance times-out even though I correctly identify instance as SQLEXPRESS? Everything seems to be normal - both SQL Server and Manager are on a single Windows XP home machine. Any suggestions. Thanks
View 16 Replies View RelatedI had a big problem on connecting sqlserver remotely from other machines on the network .....
From any computer in the network i wanna to register the instance of the sqlserver from the enterprise manager ..... the server instance doesn't appear within the available sqlserver list (the servername which equal to my machine is the only one that appear) ..... when i manualy write the servernamealias manually and i choose the connection type and then i write sqlserver username and password and then finish he give a message to me that access denied or sql server doesn't exist ... !!
by the way from the local machine i registered the local instance of sqlserver successfully and successfully i access the Databases .....
To be noted:
I previously uninstalled this alias and i then i reinstalled it again with the same name and i attached the previously exists Databes.
in the same time i installed on the same machine sqlserver 2005 connectivity clients not the server itself.
I recently installed SQL Server and Visual Studio. When I went into SQL Server, I could only connect to a SQL EXPRESS Database engine. I need to access the full Database. I tried disconnecting it, uninstalling/reinstalling. Now I cant connect to the SQL EXPRESS DB Object. There are no SQL Server services running.
Please help.
Thanks
We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).Â
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.Â
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
I have two instances of SQL Server on the same PC:
Default instance: SQL Server 2000
Named instance with name €œMS2005€?: SQL Server 2005.
Also I have another SQL Server 2005 on another PC.
I created a .NET 2.0 Compact Framework application that connects to the database and executes simple query. This application can connect to any instance of the SQL Server when it is executed on the PC (not on the server). But the problem is that when I try to execute the application from the windows CE 5.0 device, the application can only connect to the default instance (SQL 2000 and 2005) and can not connect to the named instance (Name: MS2005).
Is it some kind of limitation of the SqlClient library for the compact framework?
Below are the code and connection strings:
string connectionString = €œServer=1.1.1.1;Database=DB1;Uid=sa;Pwd=€?
string connectionString = €œServer=1.1.1.1\MS2005;Database=DB1;Uid=sa;Pwd=€?
using (SqlConnection connection = new SqlConnection(connectionString))
{
connection.Open(); //This is the point where exception is generated
using (SqlCommand command = connection.CreateCommand())
{
command.CommandText = "select count(*) from users";
object result = command.ExecuteScalar();
Console.WriteLine("Result: [{0}]", result);
}
connection.Close();
}
Thank you for your time and advice.
Hello,
I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good.
I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in.
First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error:
"An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"
However, I went in to see what other services I could connect to, and here's the results:
Analysis Services : OK!
Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)"
SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider)
Integration Services : OK!
I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either.
I even turned off my windows firewall and still no luck connecting to my own.
So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong.
Any ideas?
Thanks!
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista).
SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself.
I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works.
The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
i Update SQL Server 2005 SP1 to SQL Server 2005 SP2 but cannot connect SQL Server 2000 SP4. Please Help Me Please
===================================
Cannot connect to sia09-cxdb01cxdb01.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the
fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
Error Number: -1
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
Someone please help me before I loose all of my hair :mad: !!!
I have two machines, a Windows Server 2003 machine running an SQL Server Standard Edition database instance and client tools (Enterprize Manager etc.), and a workstation PC running Windows XP SP2 which has just the SQL Server client tools (not an actual DB instance).
I'm trying to use the Enterprize Manager client tool on my WinXP machine to remotely connect to the server instance on the server PC (via 'New SQL Server Registration' option). Everytime I do this I get the following error message:
Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server Connection.
Now I've tried using different usernames and passwords. I have login details for my SQL Server set to use Windows Login rather then SQL Server login, so I tried remotely connecting with the username and password for the server PC, tried 'sa' with server password, even tried setting up a new user on the server and logging in from the client with that, no luck. I've opened up correct ports 1433 on both PCs, even disabled the windows firewalls algother. Both server and client have SP3a installed, WinServer2003 has SP1 and XP SP2.
So I'm at a loss to how to remotely connect to my SQL Server. FYI I know the server itself is working fine because I can connect to it using Enterprize Manager/Query Analyser on the local machine. Any ideas? Many thanks for your help!
We have SQL Server 008 R2 failover clustered instance.
Installation and everthing went smooth. But I'm getting a weired error
Unable to connect to SQL Server clustered instance from one of the nodes
When SQL Server Resources are on sql1:
Connect from SSMS from sql2--> NOT Able to connect to SQL instance (A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2))
Connect from SSMS from sql1-->Working fine
When SQL Server Resources are on sql2:
Connect from SSMS from sql1-->Working fine
Connect from SSMS from sql2-->Working fine
Dim strCON As String = _
"workstation id=DJI-MAIN;packet size=4096;user id=sa;integrated security=SSPI;data source=DJI-MAIN;persist security info=False;initial catalog=RacingSystem"
Dim cnn1 As New SqlConnection(strCON)
cnn1.Open()
This is the code I have been using to connect to my default instance for 18 months. A recent upgrade to Windows Live onecare now prevents me connecting to the server from the same machine. The following error message is generated:-
Unhandled Exception: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnection.Open()
at TrainerReport001.Form1.Form1_Load(Object sender, EventArgs e) in F:#ProjectsStatsOwnerReport001Form1.vb:line 84
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)The program '[3336] TrainerReport001.exe' has exited with code 0 (0x0).
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at TrainerReport001.Form1.Main() in F:#ProjectsStatsOwnerReport001Form1.vb:line 2
If I turn off the onecare firewall I can connect as normal, but this is not a desired option. I have tried enabling port 1433 on the firewall, this does not work either. Any help greatly appreciated, onecare support seems reluctant to help.
TIA
I am trying to setup a client alias to connect to a named instance on another server.
TITLE: Connect to Server
------------------------------
Cannot connect to fred.
------------------------------
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
[URL]
The network path was not found
------------------------------
BUTTONS:
OK
------------------------------
I have set up the alias on the server and as expected it works. On the client side I have used the SQL Server Client Network Utility to configure the client side alias but no luck
I am using TCP/IP with a specific port ..
By the way the SQL is SQL Server 2012 Ent and the O/S is Windows 2012 R2 minshell
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
Can we change the name of the instance (SomeSQLInstance1, Some SQLInstance2) to be "SomeSQLStdInstance" while upgrading to SQL 2005 from MSDE 2k or SQL 2000??
View 3 Replies View RelatedI did an upgrade to my MSDE on my machine, but i use a different name (Infinity) instead of SQLEXPRESS or MSSQLSERVER. I'm wondering if there is a way for me to change it back to SQLExpress ?
View 1 Replies View RelatedHello DBA's
I have installed SQL Server 2005 on a machine with named instance, but later I noticed that I created it with the wrong name than desired. Now I need to change the instace name of the SQL Server that I have installed. How can I do that
Thanks
Satya
We installed SQL 7.0 first, then SQL 2000. SQL 7.0 is the default instance.
How can we change the default to SQL 2000?
How do I connect to an instance of a database
which is in a web application (not published) with SQL server management studio express?
I seem to be able to connect to the data base created .......but not after i have added
it into my web app?
does that make sense
Testing a client application which needs to connect to a Analysis Services DB on a different LAN. The application needs to resolve a <server_name><instance_name> to connect however we keep obtain an error message such as "Errors in the OLE DB provider. Could not connect to the redirector. Ensure that the SQLBrowser service is running"
Using ODBC we can connect to the SQL Engine on the SQL Server on the remote LAN and all accounts used are correct, to my knowledge I have installed OLE DB Provider for Analysis Services 9.0 but configured nothing. Can anyone explain where I can set up a connection to Analysis Sevices via OLE DB, ODBC or any other method required to allow our client to connect. So far I'm unable to see any OLAP connection methods in ODBC, only SQL Server or Native SQL.
Any ideas?
Is this the only way to rename the default SQLEXPRESS instance name?
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811
Is there an easier way? I tried going to Register and changing it.. but that didn't seem to do anything.
Hello guys,I've got some troubles , by attempting to connect the SQL Server database to my server.I've got this error message on the SQL Configuration Manager (when i tried to start SQL Server which was stopped) " The request failed or the service did not respond in a timely fashion.
Consult the event log or the other applicable error logs for details " I found that error log :
2007-12-18 19:36:12.20 Server Server process ID is 5080.
2007-12-18 19:36:12.20 Server Logging SQL Server messages in file
'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-12-18 19:36:12.20 Server This instance of SQL Server last reported
using a process ID of 1180 at 18/12/2007 19:12:20 (local) 18/12/2007
19:12:20 (UTC). This is an informational message only; no user action
is required.
2007-12-18 19:36:12.20 Server Registry startup parameters:
2007-12-18 19:36:12.20 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-12-18 19:36:12.20 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-12-18 19:36:12.20 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-12-18 19:36:12.20 Server SQL Server is starting at normal priority
base (=7). This is an informational message only. No user action is
required.
2007-12-18 19:36:12.20 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-12-18 19:36:12.40 Server Using dynamic lock allocation. Initial
allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.
This is an informational message only. No user action is required.
2007-12-18 19:36:12.42 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-12-18 19:36:12.43 spid4s Starting up database 'master'.
2007-12-18 19:36:12.50 spid4s Error: 9003, Severity: 20, State: 1.
2007-12-18 19:36:12.50 spid4s The log scan number (228:88:1) passed to
log scan in database 'master' is not valid. This error may indicate
data corruption or that the log file (.ldf) does not match the data
file (.mdf). If this error occurred during replication, re-create the
publication. Otherwise, restore from backup if the problem results in a
failure during startup.
2007-12-18 19:36:12.50 spid4s Cannot recover the master database. SQL
Server is unable to run. Restore master from a full backup, repair it,
or rebuild it. For more information about how to rebuild the master
database, see SQL Server Books Online.
I have just recently installed MS SQL Server 2005 Developer edition. I have installed SP2.
Today when I try to connect via Management Studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
I installed it as a default instance.
I recently added a login with dbo privileges. I have tried logging in with that sql account and also with windows authentication to no avail.
Thank you for any help.