Cannot Connect To SQL Server 2005 April CTP From Remote Computer
Jun 17, 2005Hi,
View 18 Replies
ADVERTISEMENT
Connect SQL Server Express 2005 On A Remote Computer
May 28, 2006Hello Everyone,
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Thanks,
Harsimrat
Connecting On One Remote Computer But Not The Other On Sql Server 2005
Feb 15, 2007I am unable to connect to a remote server on Computer A from Computer B, but when I reverse it I am able to connect to a remote server on computer B from computer A. I have SQL Server 2005 Developer Edition on both computers. I am using the using the SQL Management Studio to connect. Both Computers have these settings
Using Surface Area Configuration both have local and remote connections checked. Both computers using tcp/ip only checked.
Using Configuration Manager both the sql server and the sql browser are running. Both computers have tcp/ip protocols enabled.
Under the server properties on both computers, under the Security Tab, I have SQL Server and Windows Authentication Mode checked. Under the Connections tab I have Allow remote connections on this server checked.
I believe I have the Security for both the server and databases done properly giving them both proper Logins and User Roles with the proper permission.
Also went to my window firewall settings and under the Exceptions tab, I added both the sql server.exe and sql browser.exe programs on both computers on my remote network.
But when I connect on Computer B, I get an error message stating:
TITLE: Connect to Server
------------------------------
Cannot connect to 'ServerName'
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------
BUTTONS:
OK
----------------------------
I tried pinging server a and then server b and they both pinged.
Could someone please tell me what could be wrong on my remote computers.
MSSQL 2000 - Cant Connect To DB From Remote Computer
Jun 21, 2006Please bare with me as I do not have much knowledge in this area with MSSQL.
I have installed MSSQL 2000 Developer and I have setup a database which I am able to connect to and work fine with from the actual server MSSQL is installed on.
The problem comes in when i try to connect to that same database from a different remote server. It will not connect to the DB from this remote server but I know all the connection information is correct so its something on the MSSQL DB server causing this and not on this remote server.
Someone I know has had this problem and has fixed it but they wont tell me how. All I know is they said something about manually opening the ports on the MSSQL server and he also said when you set it to dynamicly determine the port that MSSQL is listening on it errored out. however if you set it staticly to 1433 it worked fine.
Ive also installed SP4 in attempt to fix this but no luck with that either. And I can also get the same exact remote server to connect to completely different DB server without issues.
If anyone can please help walk me through this I would be greatly appreciate and I am also willing to pay some money if it will make my life easier.
XP Home -LAN Remote Access - Unable To Connect From One Single Computer.
Jan 5, 2007Hi,
I have Windows XP Home Workgroup LAN.
I am treating one of the XP Home system as 'Server' and installed SQL Express 2005 SP1. Enabled remote connections access.
I have total 4 XP Home systems, out of which one i am treating as Server, from the rest 3 computers, 2 are successfully connected to the Server and able to access SQL Express without any problems. But the 3rd system is unable to communicate with the Server. I disabled all firewalls in this 3rd system but still unable to connect to the server. I am able to ping the server, browse for shared folders on the server. Except SQL Express remote connection, everything else in the network is accessible from this 3rd computer.
Can anyone help me on how to troubleshoot this 3rd computer sql express connection problem to the server.
I don't have any error message to provide here. It just says, unable to connect to sql server, verify username/password etc.
Is there any limitation on SQL Express remote connections ?
How To Connect To SQL Server 2000 And SQL Server 2005 In One Computer????
Dec 8, 2007Hi All!!!
In my Computer has MS SQL Server 2000(with default Instance) and now I Install MS SQL server 2005(with Instance name: SQL2005 ). Now I want to write Web Application to connect to the both databases (SQL Server 2000 and MS SQL Server 2005), How to Add connection string in my web.config to do it.
Help me ???
Thanks & Regards,
How Can I Connect To A Remote SQL Server 2005 DE
Jan 25, 2008I have an application developed by VB.NET 2005, and I need to install the Data base on a server to allow the clients access the data base from thier own computers, i need to allow all the functions on that data base (Insert, Update, and Delete).
I tried to do it by installing the SQL Server on a computer named (PC1) and the application on a computer named (PC2), and they are connected to the same subnet, I need to know what are the properties that I should do on the SQL Server in order to be visible through PC1 to make the connection string? And does the authintication mode affect the process?? whether it is Windows authintication or SQL Server Authintication??
Note: I am using SQL Server 2005 Developer Edition.
Thanking you in advance..
Mak
Can't Connect To Remote Db Server Using SQL 2005 In Vista
Mar 19, 2007Hello
I use SQL 2005 - SQL Server Management Studio to connect to my hosting SQL Server to manage my database , its about 1 month which I have installed Vista and SQL 2005 its working fine in local , but today I just wanted to connect to my remote server and I got this error :
Cannot connect to <My server IP Address>
I thought its a server problem , but its not. I tested it by connecting using same SQL 2005 on a windows xp system , the problem is only in vista,
by the way its SQL 2005 SP2
what can I do to solve this prob
Help - Cannot Connect To Remote SQL Server 2005 Database
Feb 2, 2008I have created a ASP.NET application on a development server that accesses a SQL Server 2005 database on the same server. This application runs flawless. However when I try to connect the same application to an identical database on a remote SQL Server database I get the following error " Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection." I actually backed up the database on the development server, and then restored the same database on the remote server. I can see the original ASPNET user account in the security tab of the restored database. However I cannot connect. The remote server has ASP.NET 2.0 installed. I have created a security database on the remote server (aspnetdb) and added the same login credentials as on the development server. I have changed the database connection strings in the web.config file to point to a: to the remote database only, and b: to both the remote database and the remote security database (aspnetdb).
I am at a loss, can anyone help.
How To Connect To Remote Database Using MS SQL Server 2005
Feb 17, 2006i'm using sql server 2005 developer edition. In sql server 2000, when i connect to my remote database, i just need to provide my IP address, server name with password in Query Analyzer. However, i do not know how to connect to remote database in SQL Server 2005. I did allow local and remote connection using Surface Area Configuration. However, after setting this, i do not know where to input the IP add, server name and pwd as well...>_<.
Who can help me?? Thanks for ur expertise.
Which Express Product Can Connect To A Remote SQL 2005 WG Server?
Oct 25, 2007Hi --- I would like a few users to be query tables, run (create ?) stored procedures, etc. on a SQL 2005 Workgroup database (the sql server is on a dedicated server)...
Will the Toolkit version (or any other version) support this?
Thanks!
ENDPOINTs In SQL Server 2005 April CTP
May 3, 2005Hi
View 7 Replies View RelatedCan I Connect To Remote SQL 2005 Server Through SQL Server Management Studio Express?
Aug 28, 2006Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies View RelatedRemote Connect To SQL Server 2005 At Home From Private/office Network
Dec 18, 2007I'm green on this networking stuff so any help is greatly appreciated.
I have setup my home computer as a server and assigned a static IP to it. I installed SQL Server 2005 Developer and allowed remote connections to it through the Surface Area Config tool, added port 1433 TCP and 1434 UDP to firewall's exception list, and started the SQL Server Browser service.
Now I can't seem to remote connect to this SQL Server from my office network. Is there something I'm doing wrong here?
Thanks!!
SQL Server 2005 Express Edition April CTP
Nov 1, 2005Ferhat writes "TITLE: Microsoft SQL Server 2005 CTP Setup (April)
----------------------------------------
Can't disable the network protocols for server SuperSocketNetLib registry key. The returned error code is -2147024770
How can I fix this?
Thanks everyone! Happy coding"
How To Connect To Remote SQL Server Database Using SQL Server 2005 Express
Dec 31, 2005Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies View RelatedWhat Should I Do To Connect SQL Server To My Computer (was New To SQL)
Mar 14, 2006I'm new to programing things, i'm on my own with MCAD/MCSD Amid Calani, i came to the point were i can"t go any further: i have VS enteprise architect,but i have only instece of SQL server,recently i downloaded SQLExpress , what should i do to connect SQL server to my computer, just because i'm new to to it looks stupid but maybe someone can HELP me with this. HELP, HEL,SOS,SOS...:eek:
View 14 Replies View RelatedBackup A Remote SQL Server To Local Computer?
May 4, 2005Is there an easy way to backup a database on a remote SQL Server to a backup file on my local computer?
View 3 Replies View RelatedHow To Check Using If SQL Server Is Running On A Remote Computer
Jan 21, 2004I am about designing an access project file that connect to a SQL Server database : it could be either on the local computer or a remote workstation, this depending on where the front end is running.
Bypassing the default log on dialog box i have set my own form that users should use to connect on adp. Then using baseconnection string i connect the adp to sql server database.
My concern is how can i check from vba if the instance of SQL Server where my back end database is located is running in order to make
users knowing that due sql server service status off their connection
tentative will fail.
inform u i can check same from console management however i would to automate same controle from my adp and avoid that users have to operate such task...
Conecting To Report Server On A Remote Computer
Apr 7, 2008
Hello,
i'v installed a pogram that uses SQLEXpress and reporting sevices on a clients computer. I can acces the reports wih http://localhost/reports$SQLEXpress from that computer, but i can't reach them from other computers in the netwok by typing http://servername/reports$SQLEXpress
i am asked to imput a pasword for user "servername/guest" (which i do not know and dont think there is one) and then get the following:
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials you supplied.
Please try the following:
Click the Refresh button to try again with different credentials.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the preactor home page.
HTTP 401.3 - Access denied by ACL on resource
Internet Information Services
What should i do to solve this problem?
Regards
Darius
Retrieve Local Time From Remote SQL Server Computer
Feb 6, 2004Hi all
I am about updating some fields with local date and time using blw API
Quote
Private Declare Sub GetLocalTime Lib "kernel32" (lpSystemTime As SYSTEMTIME)
Public Function LocalDateTime()
Dim MyTime As SYSTEMTIME
GetLocalTime MyTime
Debug.Print "The Local Date is:" & MyTime.wMonth & "-" & MyTime.wDay & "-" & MyTime.wYear
Debug.Print "The Local Time is:" & MyTime.wHour & ":" & MyTime.wMinute & ":" & MyTime.wSecond
End Function
Unquote
This works fine however due to it's not really easy for an administrator to keep checking every times wheter local date and time are correctly updated for each front end users computer i would that to reconsider my function and making it to read local date and time from remote SQL Server. my concern is to help administrator to save time as he should only need to ensure that Server is running with correct time...
thkx for any advise
DHCP Service Fails To Start After Installing SQL Server 2005 April CTP
Jul 18, 2005I have a Windows 2003 Server SP1, Active Directory, Application Server and RIS installed on my computer. After installing SQL Server 2005 April CTP my DHCP Service fails to start. In the Event Viewer I see the following Events.
View 20 Replies View RelatedUnable To Connect Second Computer To SQL Server Database
Aug 11, 2006Hello all,
New forum member here, and pretty new to SQL Server. My question is I'm having an impossible time trying to connect MS Access on Computer A to a database running on SQL Server 2k (SP3) on Computer B. Every time I try to create a new ODBC connection on Computer A, I get the dreaded Server Error 17 (SQL Server does not exist or access denied). I have no problems making the ODBC connection on the computer running SQL Server (Computer B).
My connection settings are as follows:
Computer A name = MAINDESKTOP
Computer B name (contains SQL Server) = HOMELAPTOP
Workgroup name = WORKGROUP
Server Properties:
Name = HOMELAPTOP
Authentication = SQL Server and Windows
Registered SQL Server Properties = Use SQL Server authentication, and I'm using a login name and password
Server Network Utility = TCP/IP network protocol enabled, with default port 1433
Server Client Network Utility = TCP/IP network, default port 1433
Under "Security", I have created a new login using SQL Server Authentication called "bradley", and have assigned a password to the new login. I've noticed that when I open the login properties dialogue, there are always more ***'s in the password field than the number of characters I originally used, but I suspect that's normal. I have assigned a database called "Costume" to "bradley", and have verified that the permission is checked on the Database Access tab for user "bradley".
Under "DatabasesCostume", I have verified that there is a user called "bradley" with the same login name and user name.
No matter what I try, I can't get Computer A to connect to Computer B's SQL Server database. I have no problems with any other types of connections (pinging, internet, file transfers).
This can't be that difficult! Any ideas?
Thank you!
Brad
SQL Server 2008 :: Reading Application Event Log To Remote Computer
May 1, 2015I have a remote server where I dont have RDP access.
I opened Powershell and wrote the below query to read some of the message, but getting error:-
Clear-Host
$Machine = "XXXXX"
#Get-Eventlog -Logname System -ComputerName $Machine -newest 1000 | Where-Object {$_.EventID -lt '100'} |
Error Message:
[XXXXX] Connecting to remote server XXXXX failed with the following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote computers within the same local subnet.
+ CategoryInfo : OpenError: (XXXXX:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionStateBroken
How to read the data (app/system eventviewerlog) using xp_cmdshell from SQL Server Mgmt studio itself?
Can't Connect To Remote Sql 2005 From Mobile 5 Emiulator
Jun 6, 2007
m_strRDA_DBConnectionString = @"Data Source=servername;Initial Catalog=dbname;User ID=username;Password=goodpassword;Integrated Security =true; ";
Failure to open SQL Server with given connect string. [ connect string = ;Data Source=servername;Initial Catalog=dbname;User ID=username;Password=goodpassword;Integrated Security =true; ]
i used several format for servername (sql server name; machine name, IP adress and IPaddress with port number) but no able to connect..
can you tell me where /whatis the problem?
thanks
IFR
Note:
I can connect to sql 2005 database through other win C# program with no problem.
The same code with mobile 5 with sql 2000
I have no problem. Once I moved to sql 2005 (without and with SP2 istalled) .
I can access the http://ipaddress/MobileDeviceApp/sqlcesa30.dll via the mobile browser no problem.
stack list:
at System.Data.SqlServerCe.NativeMethods.CheckHRESULT()
at System.Data.SqlServerCe.SqlCeRemoteDataAccess.Pull()
at MobileDeviceApp.RDAForm.btnRDAGetData_Click()
at System.Windows.Forms.Control.OnClick()
at System.Windows.Forms.Button.OnClick()
at System.Windows.Forms.ButtonBase.WnProc()
at System.Windows.Forms.Control._InternalWnProc()
at Microsoft.AGL.Forms.EVL.EnterMainLoop()
at System.Windows.Forms.Application.Run()
at MobileDeviceApp.Program.Main()
the code for MobileDeviceApp.RDAForm.btnRDAGetData_Click()
if (File.Exists(m_strLocalDBFileName))
File.Delete(m_strLocalDBFileName);
SqlCeRemoteDataAccess pSqlCeRemoteDataAccess = null;
SqlCeEngine pSqlCeEngine = null;
try
{
pSqlCeEngine = new SqlCeEngine();
pSqlCeEngine.LocalConnectionString = m_strLocatConnectionString;
pSqlCeEngine.CreateDatabase();
pSqlCeRemoteDataAccess = new SqlCeRemoteDataAccess(m_strRDA_URL, m_strLocatConnectionString);
pSqlCeRemoteDataAccess.InternetUrl = m_strRDA_URL;
pSqlCeRemoteDataAccess.LocalConnectionString = m_strLocatConnectionString;
pSqlCeRemoteDataAccess.Pull("tb1", "SELECT id1, name FROM tb1", m_strRDA_DBConnectionString);
lblMessage.Text = @"Done";
}
catch (Exception oException)
{
lblMessage.Text = "Error: " + oException.Message;
}
pSqlCeEngine.Dispose();
pSqlCeRemoteDataAccess.Dispose();
lblMessage.Refresh();
SQL 2005 April CTP Setup WMI Error
Aug 20, 2005
Hello, I am trying to install SQL 2005 April CTP on a laptop running XP SP2. (Using the MSDN DVD Pack - VSTS etc). The pre-requisites get installed but then i get this error message below. The link it points to just says that there is no info available on that topic. Can someone help?
Restore Database April CTP 2005 Failed?
Jul 23, 2005The following failed in EM (or whatever it is called now managementstudio I think) and I scripted it out and ran it in a query window toget more info. This works fine in SQL 2000 but not in 2005. I also triedto 'create' the database first then ran this command below but with the'force restore over existing database' checked on but this failed alsowhich is odd as well. Any ideas. This is my very first play with 2005 soit is not off to a great start although to be fair, i seem to have gorlucky on the install as it all went OK. BTW, is there a more approriatenewsgroup for this query?ThanksRESTORE DATABASE [bob] FROM DISK = N'C:BigFujiCopiesBob.bak' WITHFILE = 1,MOVE N'bob_Data' TO N'c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF',MOVE N'bob_Log' TO N'c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF',NOUNLOAD, STATS = 10GOMsg 5122, Level 16, State 1, Line 1Directory lookup for the file "c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF"failed with the operating system error 3(error not found).Msg 3156, Level 16, State 3, Line 1File 'bob_Data' cannot be restored to 'c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF'.Use WITH MOVE to identify a valid location for the file.Msg 5122, Level 16, State 1, Line 1Directory lookup for the file "c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF" failed with the operating system error3(error not found).Msg 3156, Level 16, State 3, Line 1File 'bob_Log' cannot be restored to 'c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF'. Use WITH MOVE to identify a validlocation for the file.Msg 3119, Level 16, State 1, Line 1Problems were identified while planning for the RESTORE statement.Previous messages provide details.Msg 3013, Level 16, State 1, Line 1RESTORE DATABASE is terminating abnormally.*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies View RelatedDB Connection On Remote Computer
Oct 19, 2006Hi,
I have installed SQL SERVER 2005 on my network machine.
How do I connect the DB from my machine.
From the Microsoft SQL server DSN CONFIGURATION PAGE on my machine,
I put in the name of my network PC and the SQLEXPRESS .
But connection FAILS.
The Server Name on my Network PC : RCH1SQLEXPRESS
The Full computer name is RCH1
So in my DSN CONFIGURATION PAGE on my machine,
I enetered as RCH1SQLEXPRESS
What am I doing wrong?
Backup On Remote Computer
May 29, 2006
Hi
How can i make backup on the other computer.
1. SQL computer is express edition, and computers are in workgroup?
2. SQL computer is express edition and is not on domain, and backup computer is on domain.
thanks
alex
Run SP From Remote Computer Needs Db_owner Privileges ?
Oct 13, 2006Hi All,
I created SP and enabled db_datareader and db_datawriter for roles for BUILTINUsers on database level.
I can call that SP from my application if I am accessing DB from my app running on the same machine. If I run app on other machine SP throw exception related to lack of permission.
I fixed that by enabling db_owner roles for BUILTINUsers. But it is not good fix from security point of view.
My question is: is there any other way to allow regular user to run that SP by not giving him db_owner privileges?
Also I have to mention that my SP procedure has some dynamic SQL code.
I would greatly appreciate any help,
Thanks,
Roman
ODBC On Remote Computer Won't Access
Aug 24, 2006I'm attempting to connect to an SQL Server Express database from a remote PC, but it isn't connecting. I have a user account created in the database, and I'm using the SQL authentication with that user account. I have success with this if I'm on the server that the database is on, but not remotely. Both are on the same network, even plugged into the same hub. There doesn't appear to be any network problems.
Any ideas? Thanks!
Accessing Data Base From Remote Computer
Feb 23, 2007we have sql 2005 standard edition. i was trying ( unsuccessfully ) to configure RAS on server 2003 to allow the server to authentificate vpn requests. i don't know how but the next day people started complaining about their mapped network drives being disconnected, and now no one can connect to the database via the network, eventhough they still have access to the server, and the network drives were remapped.
View 2 Replies View RelatedConnecting To A Local Instance From A Remote Computer
Sep 18, 2007Greetings friends,
Not sure if this is the right place for my question but here goes anyway.
I have an instance of SQL Server 2005 installed on my DEV PC. A colleague of mine wants to access my server from his machine which connected to the same network.
I logged on to SSMS and added him as a new login.
Will he be able to connect to it now or do I have to do more than just that?
Your help would be appreciated.