If I try to connect to localhost in the connection manager I get the error
"Test connection failed because of an error in initialising provider. Login timeout expired."
If I try to connect using server/instance in the connection mananger however, it connects just fine.
Any ideas?
Gary
I am struggling to set a SQL Server Express for remote access...
Since it is the only instance on this server, I have set it up to use port 1433 by amending the IPALL entry of the Server Network Configuration, TCP/IP Properties.
I have also disabled "Shared Memory" and "Named Pipes" to leave only TCP/IP enabled as a server network config.
I have stopped the Browser Service because I think I don't need it if I use port 1433.
From the server itself, I can connect to my SQL Server through "localhostSQLEXPRESS" or "servernameSQLEXPRESS" but not from "10.xxx.xxx.xxxSQLEXPRESS" or "127.0.0.1SQLEXPRESS"
I suppose until I can access my server from itself using the IPAddress, there is no chance connecting remotely...
I'm trying to log into a local sql 2005 exp server on my XP box. I've created a new user and create a new db. The new user is mapped to the db and has read/write access. When I try to log in directly to the server via the management studio express I get the following error:
==================================
Cannot connect to localhost.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476 --- THIS LINK IS DEAD AS IT DOES NOT EXIST
------------------------------
Server Name: localhost
Error Number: 233
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Hi!
When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:
TITEL: Verbindung mit Server herstellen
------------------------------
Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.
------------------------------
ZUSÄTZLICHE INFORMATIONEN:
Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
No connection could be made because the target machine actively refused it (System)
------------------------------
SCHALTFLÄCHEN:
OK
------------------------------
Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......
Hello all, I hope someone can help me with this.
This is a new SQL Server 2005 cluster that we just installed for the first time, with SP2. I am trying to use a stored procedure with xp_cmdshell to run a script to backup the databases. I get the following error: locked access to procedure 'sys.xp_cmdshell' of component 'xp_cmdshell' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'xp_cmdshell' by using sp_configure. For more information about enabling 'xp_cmdshell', see "Surface Area Configuration" in SQL Server Books Online.
So I started Surface Area Configuration on the local SQL Server itself, and clicked on "Surface Area Configuration for Features". I then got the following error:
"Failed to connect to localhost. (Mirosoft.SqlServer.ConnectionInfo)
Additional information: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
I am logged onto the server as a user with Admin privs; I installed SQL Server using that id. I am logged in via remote connection, so I know it allows remote connections... and I am logged into the server itself when I try to run the tool, so I don't understand why it's saying that it's trying to connect remotely.
Has anyone else ever experienced this problem? Thanks for any help you can give.
Best, Amy
Greetings all,I cannot connect to my SSIS service from Management Studio. This is on my local machine, which is my "sandbox" and preliminary development platform.
There are slightly different error messages and extended information returned depending on whether I connect using "localhost" or my explicit machine name.
I have tried registering MSXML*.dll as suggested elsewhere in these forums. I've also tried the DCOM config changes suggested elsewhere in these forums (or someone's blog?) - can't find the link at the moment.
This is all on the same machine and I am a local admin on this machine.
Anyone seen this? Anyone have any suggestions. I'd appreciate any tips.
Regards,
Tom
<< LocalHost - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to localhost.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< LocalHost - Show Technical Details >>
===================================
Cannot connect to localhost.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
<<ExplicitMachineName - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to TOM-H.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< ExplicitMachineName - Show Technical Details >>
===================================
Cannot connect to TOM-H.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
I have a test environment set up at home with a small windows server 2003 Active Directory domain. I created a windows security group on the dc and added myself and another user to the group. I then use this group as a login for SQL Server and add the login to the sysadmin server role. This works exactly as I would expect on the Windows Server computer (which is also the Domain Controller) regardless of which computer I use to connect to this Windows Server computer. However, when I set up the exact same login on the local sql server instance of my client laptop running windows xp pro, the I get an error message (Login failed for user MYDOMAINdgolds...) when I attempt to connect to the local instance of SQL server, even though I am able to connect to the instance on the domain controller with no problems using this same client laptop under the same user account. The only way I am able to connect locally on the laptop under this account (which does not have local admin privileges on any box, for testing purposes) is to add the user account separately as a login, rather than as part of a group. I'm curious as to why being a member of a security group that is part of the sysadmin server role does not allow me to connect to the local instance of SQL Server on this client laptop. The windows server computer is running SQL2k5 Enterprise, and the client laptop is running SQL2k5 developer. Any insight into this would be appreciated.
Thanks,
Dave
hi ,
I am trying to connect to my local SQL server 2005 from "Server Explorer" but it is giving the error of "Remote Connectons" not allowed.
I am using "windows authentication" login.
My SQLExpress and SQLExpress browser are running from "SQL server configuration manager".
If i use a "App.Config" file to connect to database, the SQl connection can open and i can run the stored procedure.... but cannot access the database on my local machine.
Please help.
thanks for reply.
With regards,
Girish.
Anyone encounter differences between SQL2K EE and SQL2K Dev Editon?FAILS-----Machine_A [App Server] <-- JDBC --> Machine_ASQL2K_Dev_Ed..dbError: "com.inet.tds.SQLException: Connection refused"When app server on Machine_A attempts to connect to database onMachine_A the conenction is refused.SUCCEEDS---------Machine_A [App Server] <-- JDBC --> Machine_BSQL2K_EE..dbWhen app server on Machine_A attempts to connect to database onMachine_B the conenction succeeds and the app server runs normally.JDBC driver: com.inet.tds.TdsDriverjdbc:inetdae7:locahost:1433I don't believe the app server is exhausting the 10-connection max onSQL2K developer edition (there is a 10-connection limit imposed on thedeveloper edition, correct?)LB
View 2 Replies View RelatedI have always connected to my MS SQL DB's through a remote connection, like this:
<%
Dim oConn, oRS, sSQL
Set oConn = Server.CreateObject("ADODB.Connection")
oConn.Open "Driver={SQL Server};" & _
"Database=mydb;" & _
"Server=myservername;" & _
"UID=mylogin;" & _
"PWD=mypwd"
%>
Is there a way to connect to an MS SQL DB locally with VBScript... I have seen code blocks use the keywork localhost... does that have something to do with it?
Hi all,
Sorry if this have been done before, does anyone know why I cannot connect to query analyzer using localhost? If I use my computer name, it would be fine. But not localhost. I think it might be something to do with protocols or security settings??
Thanks very much in advance.
I got a Sql Server running on my pc machine. I can access it as a localhost just fine. Its on a network and now I can't access it on other computers. When the odbc asks for the ip of the sql server is that in the normal ip format or the 9.0.1399 number that is next to the name of the server.
View 2 Replies View RelatedI am trying to deploy a project to localhost, but I get the following error. I have only one package in this project.
"Could not save the package "C:......lah.dtsx" to SQL Server "localhost".
I tried deploying other projects that I've successfully deployed before and those also fail with the same message. Am I missing something really basic here?
After creating a WebService using SQL Server 2005 HTTP Endpoints I can only browse to the wsdl file using localhost address and not via the machine name
For example http://MACHINENAME/SomeWebService?wsdl will ask for some authentication that can never be determined while
http://localhost/SomeWebService?wsdl will successfully generate the WSDL file
This happens on the actual machine and on all other machines in the domain which pretty much defeats the purpose of using Web Services to expose functionality.
Does anyone have any idea regarding
(a) what security features are at work here,
(b) Where are they documented
(c) How to set or use them in such a manner as to actually be able to use web services.
While investigating I have noticed that all examples conveniently use localhost and so either avoid or never address this issue.
Any suggestions appreciated.
Nadreck
Hi there,
I am using VWD and have my production website hosted elsewhere. The hosting company provides a backup service that allows me to download a something.bak file as the backup of my website. My query is: how to export or copy the data in the something.bak file into the database on my own computer? Can anyone helps please?
Thanks in advance.
<add key="con" value="Data Source=localhost;Initial Catalog=master;User ID=sa;Password=sa123;Max Pool Size=305;Timeout=30"/>
<add key="con" value="Data Source=local;Initial Catalog=master;User ID=sa;Password=sa123;Max Pool Size=305;Timeout=30"/>
I found the 2 way to connect to database, in first one it uses Localhost but in another it uses Local.
Please tell me which is the better way and what is the difrence between both?
Hi,
I used Microsoft SQL server 2000 on Microsoft Windows Server 2003 for database server and used Redhat Linux Enterprise for Web server.
I wrote the PHP script (on Redhat) connect to database server, its does not work. And then I install freetds on Web server but not work too.
I have problem not be solve...
- on Redhat, cannot telnet x.x.x.x 1433 to database server. But telnet to other port is success.
- on database server, cannot telnet x.x.x.x 1433 and telnet 127.0.0.1 1433.
- between web server and database server can used ping !
- I used command 'netstat -an' on database server is not show for 1433 port.
please help me... :eek:
Greetings all,I am a network security professional rather than a MS SQL admin, so Iapologize in advance if this is a bit of a basic question for thislist. I also cross-posted this to microsoft.public.sqlserver.server,so sorry if anyone's read it already.I know an admin setting up a SQL server that will only beaccesible by a webserver running on the same host (not happy aboutrunning private vs publicly avaialable services on the same host , butit's what we've got). As such, I'd like to recommend to him that theSQL server only listen on the localhost ip, 127.0.0.1, thereby makingit inaccesible to the outside world. I looked around the MSknowledgebase but couldn't find a clear document stating how to dothis. Is it even possible? Is there a better option for thisconfiguration?It's been suggested that firewalling is the only option, but I'd reallylike to do *both* (firewall & bind to localhost). The firewall in thiscase will have to be host-based instead (software) instead of hardwarefor non-technical reasons, so additionally if anyone recommends asoftware firewall they use for this purpose I'd appreciate it. My firsimpulse is to recommend Tiny, but I've never used a software firewallfor an MS SQL/Web server before.Thanks,Brian
View 2 Replies View RelatedI'm taking a .NET class and I have SQL Server 2005 installed on mymachine. When I go into Studio and then select Server Explorer and tryto add a new Connection, it seems to bomb out when I type in'localhost' for the server name. It doesn't come back with anythingfor the DBS. Is there something I need to do to get my machine tounderstand 'localhost'?
View 1 Replies View Related
Hi. Does anybody know why I'm getting the following error when I go to http://localhost/reportserver in a browser? is there a problem with how to setup permission or Windows Vista?
Server Error in Application "Default Web Site"
HTTP Error 404.0 - Not Found
Description: The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
Error Code: 0x80070002
Notification: MapRequestHandler
Module: IIS Web Core
Requested URL: http://localhost:80/reportserver
Physical Path: C:inetpubwwwroot
eportserver
Logon User: Anonymous
Logon Method: Anonymous
Handler: StaticFile
Most likely causes:
The directory or file specified does not exist on the Web server.
The URL contains a typographical error.
A custom filter or module, such as URLScan, restricts access to the file.
What you can try:
Create the content on the Web server.
Review the browser URL.
Create a tracing rule to track failed requests for this HTTP status code and see which module is calling SetStatus. For more information about creating a tracing rule for failed requests, click here.
More Information... This error means that the file or directory does not exist on the server. Create the file or directory and try the request again.
Server Version Information: Internet Information Services 7.0.
Hi I have problems when I try to see http://localhost/Reports/ send the follow message:
Failed to access IIS metabase.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Hosting.HostingEnvironmentException: Failed to access IIS metabase.
The process account used to run ASP.NET must have read access to the IIS metabase (e.g. IIS://servername/W3SVC). For information on modifying metabase permissions, please see http://support.microsoft.com/?kbid=267904.
I tried diferent commands
aspnet_regiis -u
aspnet_regiis -i
aspnet_regiis -ga ASPNET
that I found in the web but the problem is the same.
Someone can help me please?
Thank you.
http://localhost/reportserver allows me to get to the reports, but there used to be another way I did it. I thought it was http://localhost/reports, which gave me a nicer looking page and put icons that says "new" on the new reports.
Am I imagining this?
i ran my project on the visual studio 2005. but when i posted the same folder in teh wwwroot folder, it gave me the following error:
An attempt to attach an auto-named database for file C:PreranaOnCitoRunningFoldercitoason1606App_DataDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Can anybody help me show the way to get through it??
Any relevant comment/ suggestion is appreciated!!
I'm trying to setup the ASP.Net forum on my local XP Pro PC and am having problems with MSDE security. I had an old version of MSDE on the PC and uninstalled it and downloaded/setup the version on the download page with the forum.
Looking at the MSDE readme I did the Windows Authentication mode instead of the mised mode - was that wrong?
When setup tries to setup the DB I get the log entry:
Determined SQL Server version (8.00.194).
[Fail] Could not add ASPNET user to SQL Server.
SQL Server does not exist or access denied.
The server is up and running and I have already used another tool to setup its DB so the server is up an running and functioning fine.
I have search around on the net about MSDE persmissions but the hits have not been helpful - they usually refer to client tools not provided with MSDE. Even if I could find instructions on setting up a user the ASPForumSetup doesn't say what user name or permissons are needed.
I can't find any spot in the XP Pro environment to setup access permissions to MSDE - is finding that the key? My login is a member of the Administrators group.
Help!
hi all,
I installed ReportServer with success I think, and I'm able to deploy my Report Model in BIDS (it says "success")..
But now, when I try to go to http://localhost/ReportServer, I get the error below:
The permissions granted to user 'EVO610IUSR_EVO610' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
I really tried everything; I granted full permissions to the folder below for IUSR_EV0610, but it still says the same error.
C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer
Is this not the correct solution?
Any other things that I don't know?
Thanks
(in swedish)
http://localhost/reports gives :
Ett namn inleddes med ett ogiltigt tecken. Det gick inte att behandla resursen http://localhost/reports/. Rad 1, Position 2
<%@ Page language="c#" Codebehind="Home.aspx.cs" AutoEventWireup="false" Inherits="Microsoft.ReportingServices.UI.HomePag...
default installation. Even tried to reinstall all with the same result
Hints?
/Allan
OK
solved by further searching on msdn:
"problem loading report manager: The XML page cannot be displayed "
A report runs successfully on report design and successfully complete the build process but when I clicked Deploy button
an error message came out:
Microsoft Report Designer
A connection could not made to the report server http://localhost
Additional information:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft ReportingServices.Designer)
What is the problem and how to solve it.
Thanks
Hello
i created a report and i deployed it using BIDS. i can access the report from iis . but when i try to open http://localhost/reportserver, it's asking me for a username and a password that i've never specified. i tried my windows account but it doesn't work.
When i try to export the report to pdf using IIS (Control Panel- Administration tools - IIS - browsing virtual directory) it asks me for authentification also. does anyone know how to fix this ?
PS: I'm running Windows XP PRO with iis 5.1
thanks a lot
This is the error I get:
Object not found!
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
localhost
Thursday, February 15, 2007 12:50:47
Apache/2.0.54 (NETWARE) mod_jk/1.2.14
I created a website project and added login control etc. etc.Login works fine when running in Debug, however when i try to browse to site via iis , it fails with following error when "Log In" button. I am receive following error:
Server Error in '/LoginTest' Application.
EXECUTE permission denied on object 'aspnet_CheckSchemaVersion', database 'aspnetdb', schema 'dbo'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: EXECUTE permission denied on object 'aspnet_CheckSchemaVersion', database 'aspnetdb', schema 'dbo'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): EXECUTE permission denied on object 'aspnet_CheckSchemaVersion', database 'aspnetdb', schema 'dbo'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857162
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734774
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +886
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135
System.Web.Util.SecUtility.CheckSchemaVersion(ProviderBase provider, SqlConnection connection, String[] features, String version, Int32& schemaVersionCheck) +367
System.Web.Security.SqlMembershipProvider.CheckSchemaVersion(SqlConnection connection) +85
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
I can view other pages fine, but login page.
can someone help me?
thanks,
-kushpaw
Hi!
I've installed the Report Server but when I try to go to http://localhost/ReportServer I get the following error:
Reporting Services Error
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
And the log in the c:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDUMPER_ERRORLOG.log file is this:
12/01/06 12:51:40, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5344
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0A0F2A04
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
12/01/06 12:51:40, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
12/01/06 12:51:42, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
12/01/06 12:51:42, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Archivos de programaMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0058.mdmp
12/01/06 12:51:42, ACTION, aspnet_wp.exe, Watson Invoke: No
Does anybody have which could be the problem???
Thanks in advance! :)
When I try to give myself administrative rights SQL presents me with the following error message:
TITLE: .Net SqlClient Data Provider------------------------------An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476------------------------------BUTTONS:OK------------------------------
This isn't just only a problem with the administrative rights. This happens in many different places such as when I try and add a new data source in VB Express 2005 it gives approximately the same error message.
My MSSQLSERVER service is running nicely but my SQLSERVER isn't and on top of that I can't get it to start!
If anybody can help me out here I would really grateful.
Thanks.
--------------------------------------------------------------------------------------------------------------
OK. I fixed that with the help of another thread that was similar except now this message is coming to haunt me:
TITLE: System.Data------------------------------Instance failure.------------------------------BUTTONS:OK------------------------------
I'm purely guessing this is related my SQLSERVER service not running but that is purely a guess. Getting back to the problem I have no clue how to fix it!
Please help!
An error has occurred during report processing.
Cannot create a connection to data source 'f_MsOracleEmLims'.
ORA-12154: TNS:could not resolve service name
Hello, Two members have solved my deploying report to localhost problem. The report now is on localhost,
but when I clicked a report to view, the above error message came out.
The Oracle 10g database is on company network database server. I created a dataset that links to the data source 'f_MsOracleEmLims'. This data source works OK in report design but just does not work out in localhost.
What it means and how to solve it.
Thanks,
Zixing