Cannot Connect To Remote SSRS Instance With SSMS
Jun 13, 2006
I recent installed a named instance of SSRS 2005 on a remote server. The server has a side by side install of SSRS 2000 and SSRS 2005, with the SSRS 2005 being a named instance. The server also has SSL and MS Sharepoint Portal Server installed.
When I try and connect to the SSRS 2005 instance with my client install of Mangement Studio, I get the error message:
"The underlying connection was closed: Could not establish a trust relationship for the SSL/TLS secure channel. (System.Web.Services)
Additional Information: The remote certificate is invalid according to the validation procedure. (System)."
Obviously, this is a SLL issue, but, not being a security guru, I have no clue on how to fix this. I do know the certificate is valid, not expired and properly working. Both installs of SSRS are set up using the SSL certificate. Also, I am not connecting to SSIS with Management Studio, as I heard there is a bug connecting to both SSRS and SSIS at the same time.
Anyone have any ideas?
Thanks!!
Jeff
View 6 Replies
ADVERTISEMENT
May 25, 2007
I have installed a SQL Server 2005 Standard Edition instance with SSIS on Window Server 2003 x64. From my PC, I am able to connect to the Integration Services on the server using Windows Authentication but not with a local SQL login - and the option to change authentication methods is greyed out.
Is it possible to remotely connect to SSIS using a SQL login rather than a Windows login? If so, any ideas or references for configuring it as such?
Thanks.
- Lance
View 1 Replies
View Related
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
View 5 Replies
View Related
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE]Â 1450. I also setup the firewall rule to allow access to Port 1450.
View 4 Replies
View Related
Apr 9, 2008
Hi,
In a nutshell I'm unable to connect to SSRS within SSMS yet I can connect to SSIS, SSAS and the Database Engine within SSMS from the same named server instance ("BOODEMO")
"SQL Server 2005 Surface Area Configuration" reports that service status SSRS (DEMO) is running.
The only other problem that I have found which may be linked is that within "Reporting Services Configuration Manager BOODEMO" there is a red circled crossed next to "Report Manager Virtual Directory", yet this application has just recently reported that I successfully created a virtual directory.
Any help or constructive guidance would be greatly appreciated.
Thanks in advance,
Kieran.
View 8 Replies
View Related
May 18, 2015
Error: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) (Microsoft.SqlServer.DTSRuntimeWrap)
Â
Here are the steps I followed:
To configure rights for remote users on Windows Server 2003 or Windows XP
View 10 Replies
View Related
May 8, 2013
We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).Â
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.Â
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
View 10 Replies
View Related
Mar 20, 2014
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
View 4 Replies
View Related
Jun 9, 2015
We have a 2 servers  with 2 default instances,Â
Environment- SQL server 2012 SP2 | Windows Server 2008 R2
1server:
hostname-serverA , Instance-serverA and port-2040 Ip-192.164.1.1
2server:
hostname-serverB , Instance-serverB and port-2040 Ip-192.164.1.2
If i do a SSMS connection-the possible connections strings which can be used to connect to Instance "serverB" should be,
a.serverBserverB
b.serverB,2040
c.192.164.1.2,2040
Note: but even the connection string "serverBserverA,2040" also connects to Instance "serverB", when i try to connect from SSMS, In SSMS it shows the wrong instance name like, "serverBserverB", but it actually connects to  Instance "serverA"
i.what is the reason behind this?
ii.Is there any way to avoid this connection, by performing server property changes, if any ?
View 5 Replies
View Related
Jul 7, 2007
Just installed SQL Server 2005 Standard. When I attempt to connect using SSMS it just sits. No error comes up. The log seems to indicate everythings OK. SQLServer and SQLBrowser services are started. Here's the log:
2007-07-07 09:41:23.07 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-07 09:41:23.07 Server (c) 2005 Microsoft Corporation.
2007-07-07 09:41:23.07 Server All rights reserved.
2007-07-07 09:41:23.07 Server Server process ID is 2412.
2007-07-07 09:41:23.07 Server Authentication mode is WINDOWS-ONLY.
2007-07-07 09:41:23.07 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-07-07 09:41:23.07 Server This instance of SQL Server last reported using a process ID of 1348 at 7/7/2007 9:35:40 AM (local) 7/7/2007 2:35:40 PM (UTC). This is an informational message only; no user action is required.
2007-07-07 09:41:23.07 Server Registry startup parameters:
2007-07-07 09:41:23.07 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-07-07 09:41:23.07 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-07-07 09:41:23.07 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-07-07 09:41:23.11 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-07-07 09:41:23.11 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-07-07 09:41:23.34 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-07-07 09:41:23.36 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-07-07 09:41:23.89 Server The Microsoft Distributed Transaction Coordinator (MS DTC) service could not be contacted. If you would like distributed transaction functionality, please start this service.
2007-07-07 09:41:23.89 Server Database mirroring has been enabled on this instance of SQL Server.
2007-07-07 09:41:23.90 spid5s Starting up database 'master'.
2007-07-07 09:41:24.20 spid5s SQL Trace ID 1 was started by login "sa".
2007-07-07 09:41:24.28 spid5s Starting up database 'mssqlsystemresource'.
2007-07-07 09:41:24.31 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-07-07 09:41:25.65 Server A self-generated certificate was successfully loaded for encryption.
2007-07-07 09:41:25.67 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalMSSQLSERVER ].
2007-07-07 09:41:25.67 Server Server local connection provider is ready to accept connection on [ \.pipesqlquery ].
2007-07-07 09:41:25.67 spid9s Starting up database 'model'.
2007-07-07 09:41:25.67 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2007-07-07 09:41:25.67 Server Dedicated admin connection support was established for listening locally on port 1434.
2007-07-07 09:41:25.68 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2007-07-07 09:41:25.68 spid5s Server name is 'LAPTOP'. This is an informational message only. No user action is required.
2007-07-07 09:41:25.71 spid12s Starting up database 'msdb'.
2007-07-07 09:41:25.71 spid13s Starting up database 'ReportServer'.
2007-07-07 09:41:25.71 spid14s Starting up database 'ReportServerTempDB'.
2007-07-07 09:41:25.71 spid15s Starting up database 'testx'.
2007-07-07 09:41:27.45 spid9s Clearing tempdb database.
2007-07-07 09:41:28.65 spid9s Starting up database 'tempdb'.
2007-07-07 09:41:28.78 spid5s Recovery is complete. This is an informational message only. No user action is required.
2007-07-07 09:41:28.78 spid12s The Service Broker protocol transport is disabled or not configured.
2007-07-07 09:41:28.78 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-07-07 09:41:29.25 spid12s Service Broker manager has started.
2007-07-07 09:57:23.54 Server CPU time stamp frequency has changed from 117988 to 200203 ticks per millisecond. The new frequency will be used.
2007-07-07 10:09:23.85 Server CPU time stamp frequency has changed from 200203 to 242307 ticks per millisecond. The new frequency will be used.
2007-07-07 10:20:03.20 spid12s Service Broker manager has shut down.
2007-07-07 10:20:04.25 spid5s SQL Server is terminating in response to a 'stop' request from Service Control Manager. This is an informational message only. No user action is required.
2007-07-07 10:20:04.25 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
View 3 Replies
View Related
Sep 27, 2015
Would it be possible to get a multi-database functionality on the same instance option available in SSMS anytime soon?
View 6 Replies
View Related
Oct 27, 2015
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
View 4 Replies
View Related
Jun 25, 2015
Is there a roadmap for allowing SSMS to connect to a PDW (MS SQL2012 Parallel Data Warehouse) with full functionality? Current support leaves much to be desired without installing third party tools.
View 3 Replies
View Related
Mar 25, 2013
One of the instance is hosted in a cluster node with 128GB of ram and 80 processors allocated to this instance...And last week, we had an issue with temp DB as it was full.We increased the drive space over the weekend.
Now whenever we connect this instance from other server through remote SSMS, we see, refreshing the object including connecting to this instance is very very slow...It takes more than 10 sec. Initially this was not the case. Even hear from end user that the application is performing gradually slow.
I check the network, fregmentation, settings across this instance, and all looks good.
View 2 Replies
View Related
May 16, 2006
I've installed SQL Server 2005 SP1 RTM on a Windows 2003 R2 machine (machine A), and my local workstation (machine B).
From machine B, I can use SSMS to connect to SQL Server on machine A. This is using either "New Query" or "Object Explorer".
However, on machine A, SSMS can only connect to machines A or B using the "New Query" option. If I try "Object Explorer" for either, I get the error message "Failed to retrieve data for this request... urn could not be resolved at level Configuration."
I'm not sure what died (no pun intended) since the last time this worked. Any thoughts on this?
View 1 Replies
View Related
Sep 21, 2007
We are running SQL 2005 Standard on Windows 2000 Server Standard. We are trying to connect via SSMS with the Object Explorer to the server and it is failing with an error message stating:
"An exception occurred while executing a Transact-SQL statement or batch.
Additional Information:
Error executing extended stored procedure: Invalid Parameter (Microsoft SQL Server, Error: 22001)
Using profiler, I tracked down that it is a call to xp_instance_regread. This is something that SSMS is issuing - not me.
We've found in the past that rebooting the server fixes the problem. But it keeps cropping up. The only thing running on this server is SQL 2005 - so if something is monkeying with the registry - it's got to be SQL Server itself.
Querying works just fine - we can use the editor to perform queries without any issue - it's just explorer that goes kaboom.
We have SP2a installed on the server and on most (if not all) of the clients.
This is getting frustrating because it's a production server and we're having to reboot this to fix it.
View 12 Replies
View Related
Sep 15, 2015
Every time I start SSMS 2012 the "Connect to Server" box is partially obscured in that the top of it, the move bar can't be accessed. I've manually moved it using "alt+space" then "M" followed by the arrow keys, but it's getting annoying. Â Is there any way to change the initial start position of this box?Â
View 6 Replies
View Related
Oct 23, 2007
hi guys,
do you know if we can use sql authentication to connect to SSIS through SSMS. right now it's only windows authentication, and SQL authentication is grayed out.
Not sure if this question has already been answered because it sounds like easy question.
View 1 Replies
View Related
Nov 17, 2014
I am working with SSRS. I do have admin rights. I can connect to the url https://localhost/Reports and can create the new reports and subscription. Delete the reports and subscriptions.
But when I tried to connect to Reporting Services from SSMS, I am getting below error.
I used the windows authentication. It is showing that the user name or password is not valid or you don't have permission to access this server
I can connect to the database engine and Integration services but unable to connect to the Reporting services.
View 4 Replies
View Related
Apr 17, 2008
Hi,
I am able to run an SSIS script from BI Visual Studio no problem, I am also able to connect to SSIS within SSMS successfully. I have system access rights to the Database Engine of the same server name.
However I have a user who also has full system access rights to the Database Engine of the same server name. However he can only connect to the database engine, he cannot connect to SSIS within SSMS, but he can successfully execute a SSIS script within BI Visual Studio which is targeted to the same server name which he can€™t connect to within SSMS.
Any help would be greatly appreciated.
Kind Regards,
Kieran.
View 5 Replies
View Related
Feb 19, 2015
Version: SQL SERVER 2012 enterprise edition and SP2.
Due to one of the security reason, I have changed default port 1433 to another port number in configuration manger tools->protocols for MSSQLSERVER->TCP/IP --> IP ALL section mention another port number.
After restarted service, SQL SSMS able to connect server itself and new port number also LISTENING.
But SQL client SSMS not connected to one of the PC side after changing default port.
View 3 Replies
View Related
Feb 8, 2008
Hi ALL,
The sub report has stored procedure which uses ##temp table,to get it's results.
Stored procedure code is:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER OFF
GO
ALTER PROCEDURE [dbo].[rpt_FAP_Profile_claim] @TABLE_NM varchar(50),@MBR_ID varchar(50)
AS
SET NOCOUNT ON
DECLARE @SQL_TXT varchar(8000)
SET @SQL_TXT = ' SELECT * FROM STEP_PROFILE_CLAIM_' + @TABLE_NM + ' c WHERE c.MBR_ID = '''+ @MBR_ID + ''''
--SET @SQL_TXT = 'SELECT TOP 100 * FROM CLAIM'
EXEC(@SQL_TXT)
When I run this in SSMS gives error::-
Msg 208, Level 16, State 1, Line 1
Invalid object name 'STEP_PROFILE_CLAIM_765032'.
(1 row(s) affected)
How do I make it work and get the result in my sub report.Is any properties needs to be set in the SSMS or SSRS sub report or any other modificatons?.Or is some thing wrong in the temp table?.Plz help.
Thanks in advance.
View 1 Replies
View Related
Aug 1, 2007
Hi,
I have gone through so many kb articles to understanding the problem, but no luck as yet.
Here is the situation:
I have two dev servers : Server A and Server B. Both are set up in an identical fashion. Windows 2003 sp2, Sql Server 2005 sp1 Developer Edition, both are on the same domain, Both have all the three protocols enabled: Shared Memory, Tcpip, and Named Pipes in that order. I can ping both servers, and telnet using the default port. Both have only default instances. Both use the same domain user account for sql service. Both have the error in the log saying that spn could not be registered so authentication may fall back to NTLM.
Here is the issue: When I try to register Server A specifying tcp-ip connection, I am successful and I can see that the authentication is NTLM - is as expected. since the spn registration did not happen and since the sqlservice account is not a domain admin, the authentication used NTLM over tcp-ip. However, I try to register Server B specifying tcpip, I get a cannot generate sspi context error. Why did the authentication not fall back to NTLM as in Server A? From what I read in the KB articles, I asked our network admin to check up the spn, but he assures me that spn were never manually registered.
Can somebody throw more light on this issue?
Thanks
KRSE
View 1 Replies
View Related
Nov 20, 2014
Is there any way I can deny connection from SSMS only from remote servers?
View 7 Replies
View Related
Dec 11, 2014
I'm using ssms 2014, but got the same problem with 2012. I use ssms almost entirely on remote desktop sessions ( Windows 7, Server 2008R2, Server 2012 ). It may be related to having filtered job activity monitor windows open for hours, but about once per day ssms fails, and has to restart. Upon resuming usually only one of several queries is restored.
View 8 Replies
View Related
Oct 2, 2015
Because of a performance problem, somebody has given me a script which came from a SSRS report.
The code as supplied does not work when multivalued parameters are used.
Testing/tuning/building in SSMS is far superiour than in SSRS. So that's why I like to use SSRS for building the code/script/sql-statement.
Offcourse parameters have to be set correctly. (That is no problem).
Splitting of the multivalued parameter is not a problem either.
View 5 Replies
View Related
Aug 31, 2015
I need to install SSIS/SSRS in SSMS. I have connected the SharePoint list view to excel for reporting purpose but due to data size the performances is very slow in excel and now I would like to connect the SharePoint List to SSIS/SSRS
I have windows 8, 64 bit system
I have installed SQL Server Management studio 2012 but I am unable to enable the Integration and Reporting Services
May be I have missed to choose the option during installation.
View 5 Replies
View Related
Oct 17, 2008
Have installed SQL 2008 on Windows 2008 and have come across a strange issue.
Â
When connecting to the Report Server cvia SSMS to enable "My Reports" (for example) the Report Server Properties are greyed out and we cannot alter them. This occurs when logged on both locally & remotely to the Win 2008 server.
Â
Interestingly, we have another (XP Pro) box with SQL 2008 on it. If we connect to the Win 2008 SQL report server from the XP machine's SSMS, then we have full control and can access and change the report server properties on the Win 2008 server.Â
Â
The relevant domain accounts are in the Admin group on the Win 2008 server and the XP Server so we are confused as to why we cannot edit the Win 2008 report server properties locally.
View 5 Replies
View Related
Aug 18, 2015
Basically, I am asking if it is possible to use SSMS (Query Analyzer window) with Informix. I am thinking linked server. If I have the ODBC driver installed on my workstation (win 7 pro VM workstation -- SSMS on same VM machine) is this doable? Do I just do the standard linked server routine or is there a special way (if it is even doable).
View 4 Replies
View Related
Jun 15, 2006
Post moderated by XIII, please leave out the "irrrggent" in the subject line:
i'm using a SQL Server 2000.now want i want is to make one of the machine on my local networkMachine one: i've installed the SQL Server 2000 with these settings1) Use Local System2) MixMode (Use Windows Authentication and SQL Server Authentication)USER ID = saPassword = saFrom Machine tow which has the program: the connection string is:<<< Me.SQLConnection_Search.ConnectionString = "packet size=4096;integrated security=SSPI; Persist Security Info=true; data source= "the name of the instance on Machine ONE"; user id=sa; password=sa; initial catalog=DBNEW; Server="Machine One Name">>>>>>>when i connect --> "connect faild to MachineOneGuest"when i changed the SERVER to SERVER = "Machine One NameUser Account of the windows"this message appear : "SQL Server does not exist or access is denied"So what can i do.??????
View 1 Replies
View Related
Feb 11, 2008
Can anyone tell me what are the necessary steps if I want to connect to a Remote SqlExpress Instance ? I am using Visual Studio 2005. When I tried to connect it says that the remote server does not allow remote connection. I have enabled all the protocols from Sql Server Configuration manager and disable the firewall. But it still not working. Pls Help me.
Thank You.
View 4 Replies
View Related
Aug 21, 2006
I am trying to connect to an instance of SQL Express through a vpn, simply using the SQL Management Studio, providing the server ip address x.x.x.xMSSQLSERVER, and using SQL authentication login. I receive the following message:
Cannot connect to <server>, etc., etc.
error 25: - Connection string is not valid
Does anyone understand this? I am trying to connect through the SQL Server Management interface, not with a client program that would utilize a connection string. Is there something which prevents Management Studio from working over a vpn?
To connect, I am using SQL authentication, and have verified the login and password locally on the target pc. The SQL browser service is running on the target pc, and I can telnet to the port which it is monitoring, through the same vpn connection. Remote connections are enabled for TCP/IP in the Surface Area configuration on the target pc.
Any help appreciated.
View 6 Replies
View Related
May 30, 2007
How do I connect to an instance of a database
which is in a web application (not published) with SQL server management studio express?
I seem to be able to connect to the data base created .......but not after i have added
it into my web app?
does that make sense
View 1 Replies
View Related
