Cannot Connect To To The Other Server When Setting Up Replication In SQL 2005
Jan 2, 2007
Im trying to setup replication between two 2005 standard editions. They are on the same LAN and installed equally + SP1. They are installed as named instances (with the same instance name MSSQL01). Remote access is allowed and TCP/IP and shared memory and I can connect between them.
SQL1MSSQL01 is configured as the publisher & distributor and the snapshot is done. When Im using the subscriber wizard from SQL1 to create the subscriptions and add SQL2MSSQL01 as a subscriber the connection fails to the remote server.
The error message is:
TITLE: Connect to Server
------------------------------
Cannot connect to SQL2MSSQL01.
------------------------------
ADDITIONAL INFORMATION:
Failed to connect to server SQL2MSSQL01. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
When I do a manual connection to SQL2 using the server managemnet studio on SQL1 I cannot connect using the instance name e.g. SQL2MSSQL01, it works only when only using the server name e.g. SQL2. Then I have full access both when using a windows or SQL user.
When trying with using the server name only when setting up the subscription, I got a error saying that I need to use the full name.
TITLE: Connect to Server
------------------------------
Cannot connect to TFMHQARNDE07.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, ' SQL2MSSQL01'. (Replication.Utilities)
I can also mention that theese servers are cloned from another server and I needed to drop the old servername and add the new servername (sp_addserver) on both servers to get the publisher to work.
When I try to setup the subscription from SQL2 and add SQL1 as a publisher I get the same error.
Any one have any idea what it can be?
View 1 Replies
ADVERTISEMENT
Jun 14, 2007
Hi there
im trying to set up a replication from a local server to a remote server.
when starting up and selecting the Distribution / publisher, i get the following errors --->
Details as followed...
TITLE: New Publication Wizard
------------------------------
SQL Server is unable to connect to server 'SERVERX'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
and...
===================================
SQL Server is unable to connect to server 'SERVERX'. (New Publication Wizard)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
===================================
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVERY'. (Replication.Utilities)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.CheckServerAlias(ServerConnection conn)
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.Open()
at Microsoft.SqlServer.Management.UI.CreatePublicationWizard.PrepareToShow()
View 3 Replies
View Related
Jul 6, 2006
Hi
I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.
Has anybody done this before. If yes what will I need to check. Can you please let me know :-
1) SQL Server 2000 which SP should be installed to support this enviroment.
2) SQL Server 2005 which SP should be installed to support this environment.
3) Any thing that I need to look out for.
Thanks for any inputs on this.
Regards
View 3 Replies
View Related
Sep 10, 2015
I have created a publication on SQL 2014 SP1/CU1 it is going to a distribution server also a SQL 2014 database. The subscriber is also SQL 2014 SP1/CU1. When I set it up there are no errors. I fire up Replication MGR and it looks good after the snapshot and distribution agent have been started. Again, no errors. When I do a tracer token the information gets to the distributer in 1 - 4 seconds but it never gets to the subscriber, the tracer token monitoring screen only shows pending for distributor to subscriber.
I can upload the scripts used to create the publication and/or the subscription but am a little hesitant because of server names in the scripts.
View 2 Replies
View Related
Dec 12, 2006
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
These are my values in my Java app web.xml -
<init-param>
<param-name>DBDriver</param-name>
<param-value>com.microsoft.sqlserver.jdbc.SQLServerDriver</param-value>
</init-param>
<init-param>
<param-name>DBURL</param-name> <param-value>jdbc:sqlserver://localhostsqlexpress:1055;databaseName=CORNERS</param-value>
</init-param>
<init-param>
<param-name>DBUser</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>DBPwd</param-name>
<param-value>myPasswd</param-value>
</init-param>.
And yes, the port is 1055 - I checked to find it.
I am using Microsoft SQL Server 2005 JDBC Driver 1.0 (sqljdbc_1.0.809.102).
Does anyone have any idea what is wrong so that the login fails in the Java application but works in the .Net application?
View 7 Replies
View Related
Mar 6, 2007
Hi!I´m trying to create a merge replication publication for a SQL MobileApplication .Everything works fine creating the publication and I'm able to dothehttp://xxx.xxx.xxx.xxx/aaaaaaa/sqlcesa30.dll, and it display's the"sql server mobile server agent 3.0".But when I run the application on the PDA and it´s doing thereplication it appears the following error:'Failure to connect to SQL Server with provided connectioninformation . SQL Server does not exist , access is denied becausetheIIS user is not a valid user on the SQL Server , or the password isincorrect' .any idea of which could be the reason...?Thanks in advance!!!
View 1 Replies
View Related
Aug 15, 2006
Can anyone tell me why I am getting this error when I try to select * from a table through a newly created synonym? I have admin rights to both db, but they are on separate servers.
<Error>
OLE DB provider "SQLNCLI" for linked server "srvDEV" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
</error>
<code>
CREATE SYNONYM ARContractTerms_syn FOR srvDEV.EricsAdeptCastle.dbo.tblARContractTerms
SELECT * FROM ARContractTerms_syn
</code>
Am I running into schema problems?
Thanks all
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.2900.2180
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
View 2 Replies
View Related
Mar 7, 2007
Is there any setting to indicate Unicode data to handle, so that no need to exclusively use Unicode data types ( ex nvarchar ).
I need to execute both Unicode and non Unicode SQL statements with in one environment. I don't want to create seperate database again.
Please let me know if any one had approached on SQL server this way. I am looking the way Oracle provides where you don€™t need to declare the data type of the column as Unicode type in table definition but can indicate when running a query to manipulate that field as Unicode field.
Thank youSunil
View 1 Replies
View Related
Mar 23, 2005
Using ODBC and SQLSetConnectAttr() with SQL_ATTR_LOGIN_TIMEOUT and 5 seconds set, the call never returns. I am testing server down conditions so the server really is inaccessible but I expect a return. If I remove this attribute I get a timely response with an error code indicating server is inaccessible.
Am I using this call/parm incorrectly?
View 1 Replies
View Related
Nov 29, 2005
Hi,I had the SQL Server Express installed on my desktop and it was working just fine. Now, I upgraded to .Net 2.0 and I had some problems with the SQL Server Express just like in post http://forums.asp.net/1070169/ShowPost.aspx.These problems were solved by using a cleanup tool but now when i try so setup the SQL Server Express 2005 i get the error:SQL Server Component Update will install the following components for SQL Server Setup:- (ok) Microsoft SQL Native Client- (error) Microsoft SQL Server 2005 Setup Support FilesErrors occurred during the installation:Error 1603 installing Microsoft SQL Server 2005 Setup Support Files.See log file for more detailed information.Fatal error during installation.The log file as lots of information such as:Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_WS10170_Support.log Last Action : InstallFinalize Error String : The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}. Error Number : 2908 -------------------------------------------------------------------------------- WS10170 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information. Can someone please help me on trying to avoid format the desktop.Thanks,Stromberg
View 2 Replies
View Related
Jul 17, 2006
My manager has asked me to install and configure Source Safe so that our team can check out stored procedures, (and other objects), and check them back in when we are finished working on them.
I'm not familiar with Visual Source Safe. Does SQL Server 2005 work with Visual Source Safe in such a way that I can check out/in SQL Server objects such as procedures?
If someone knows the answer, or perhaps an existing thread that covers this, please let me know.
Thank you for your time!
Frank
View 1 Replies
View Related
Mar 21, 2007
I have recently upgraded my databases from SQL 2000 to 2005. In 2000, I could set the network affinity so that sql server was only accessible from one of the two network cards. I cannot find how to do this in sql 2005. Is there a way?
In my installation, I have two network cards in each server. The "A" network adapter connects to the "A" hub, and the "B" adapter connected to the "B" hub. Traffic on trhe "B" hub is my private, non-routable network, This is where I want the SQL Server traffic to run. The A hub traffic is the public network. This gives me the ability to isolate SQL Server from the outside world.
View 1 Replies
View Related
Jul 16, 2007
Hi there,
I am looking for a way to have SQL server accept incomming e-mails and store the contents of the e-mail into the database. I was doing some research on the subject of recieving emails from a SMTP server with the server having an account, but it looks like there are no information on the subject.
Is this possible? Or do I have to use some sort of work around hack?
Thanks in Advance,
Liv
View 6 Replies
View Related
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Jan 9, 2007
hi,
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Thanks.
View 1 Replies
View Related
May 26, 2008
Hi,
I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
"
Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251
"
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S.
I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
View 3 Replies
View Related
May 2, 2006
Hi there!
My provider does not yet support SQL Server 2005, they are still on SQL Server 2000. I put together a very basic login page, but it is crashing everytime I access it because of this problem, and sadly I am not advanced enough as yet to know how to remedy it! Can you help?
Here is the error page, some of it; - Any ideas gratefully received!
Russ.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
View 1 Replies
View Related
May 15, 2006
How would Set permissions Sql Server 2005 so that I can access a asp page created in VWD and Sql Express.
On the production server i have just the one instance of Sql
I have the following connection string in the web config file:
<connectionStrings>
<add name="ConnectionString" connectionString="server=serversNameXPRESS;uid=aspuser;pwd=aspuserPassworkd;database=DATABName" />
</connectionStrings>
The account i setup to access the db in Sql 2005 Proper on the Production serve is Represented by the name in the above example as “aspuser�. I created this user in security, logins. And I gave permissions to this on the Db level “create procedure delete, select, update insert.�
I get a error when i run the page in the browser that says “login failed for aspuser.�
I know virtual directory is configured properly. I can run aspx page in the directory with out a db connection, without and error.
Any help would be greatly appreciated.
View 2 Replies
View Related
Oct 18, 2007
Hi!
I have a problem changing the language setting to swedish on sql server 2005 compact edition. The thing is that I'm using a language dependent format: '1998-02-28 14:23:05' (Numeric) when saving and I rather don't want to change this format, because it's a lot of work. (The default setting on the database seems to be us-english, which has the format month-day-year and there by gets wrong for me).
As I understand, this is detemined by the language settings on login. So I set this by using the 'locale identifier' (sv-SE) in the connection string to the CE database, but when I try to save the data, the datum is still interpreted as us-english format.
(The application I'm running have been upgraded from sql compacte edition 2.0 where this worked just fine, though without specifing any language settings in the connection string.)
Appreciate any help!
View 2 Replies
View Related
Oct 21, 2006
Hi,
I have setup a linked server to a DB2 database using "Microsoft OLE DB Provider for ODBC Drivers",
the connections works fine i am able to run select queries.
but the number of rows returned from the two following statements are different.
select * from linkedserver...tablename
select count(*) from linkedserver...tablename
e.g. The First statement returns 116 rows, whereas the second query returns count as 144....
I am a bit confused ?????
could anybody think of any possible reasons..
Cheers
ARAW012
View 4 Replies
View Related
Nov 13, 2007
Hi ,
We want to install 2 applications that run on SQL server 2005 but the requirement of database installation are different Collation setting ( One require Dictionary order, case-insensitive, for use with 1252 Character Set and other require Dictionary order, case-sensitive, for use with the 437 (US English) Character set).
So the question here could I install both two applications successfully on same platform ? and if yes how?
Thanks and regards,
Quinh
View 5 Replies
View Related
Feb 28, 2006
I am setting up a clustered sql 2005 to test replciation and I am having trouble setting the server as a distributor. I get the following message
* SQL Server could not configure xxxx as a Distributor.
Only replication jobs or job schedules can be added, modified, dropped or viewed through replication stored procedures.
Changed database context to 'master'. (Microsoft SQL Server, Error: 22538)
Any help is appreciated.
Thanks
View 3 Replies
View Related
Aug 8, 2006
Trying to set up replication between two machines (Developer Edition) and receiving an unitialized pull subscription. Error message states the publisher cannot be accessed with an agent message of 20084.
Any ideas?
Thanks!
View 1 Replies
View Related
Apr 17, 2007
Hi,all BI experts here,
Thank you very much for your kind attention.
I am having a problem with connecting to SQL Server 2005 database from Office Business Scorecard Manager 2005 (the connection string i am using is: provider=SQLOLEDB;Data source=server_name; Initial catalog=database_name). But the connection failed. Would please any experts here shed me any light on what is the problem and how to fix it then? As there is no any forum for Office Business Scrorecard manager 2005. Therefore I post my thread here as it is related to the connection to SQL Server 2005 database engine, thought here is the best place for this question.
Thank you very in advance for your kind advices and help. And I am looking forward to hearing from you soon.
With best regards,
Yours sincerely,
View 6 Replies
View Related
Nov 21, 2006
I've used Sql Server 2000 and Visual Studio 2003 for a few years. I've started a new position and they have access to Sql Server 2005 Standard and Visual Basic 2005 Express which I'd like to use for a new project. So I installed Sql Server 2005 and then VB 2005 Express on my workstation. I didn't choose the Sql Server option for VB Express because I already had Sql Server 2005 Standard installed with a simple database created. I created a simple vb project that justs connects to the database but I get the following error.
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0000, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I looked at permissions in the database and it looks ok. I'm the db owner and I'm using Windows Auth. My connection string is
"Data Source=MySystem;initial catalog=AdventureWorks;integrated security=true;"
I thought I'd look at the starter kit to get some ideas about what the problem is, but when I started the movie starter kit project, it was upset that I didn't have Sql Server 2005 EXPRESS installed. Yea, but I do have Sql Server 2005 Standard installed.
Any help will be greatly appreciated. Thanks.
View 6 Replies
View Related
Mar 21, 2007
During an install of SQL Server 2005 Express setting the sa password does not work consistently. The install is being run as administrator and I am using an .ini file to pass the settings,
SECURITYMODE=SQL
ADDLOCAL=ALL
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
INSTANCENAME=DBSERVER
SAPWD=Westtech#1
and while most times it works correctly, occasionally, maybe 4 out of 10 times it fails to set the password and I have been unable to find any warnings or errors in the logs it generates.
We are coming up on release and this is causing us some real problems. Does anyone have any ideas, something I could look at?
Thank you,
Kathy Mook
Westbrook Technologies, Inc.
View 6 Replies
View Related
Oct 16, 2006
I need to set up 1 new user in SQL Server 2005 to be able to read specific tables in a db (db1).
The user will connect from MS access using odbc links (SQL Native client ot SQL Server driver)
I've tried to set up one and once logged on from the user workstation, I can only see sys. tables and INFORMATION_SCHEMA tables.
None of the required db1 tables appear.
under Security/Logins I've created User1:
SQL Server auth. with password
default db = db1
server_roles = none
user mapping = map, db1, user1,dbo
securables = none
status = grant, enabled
on the access db, the odbc link was set up with default db = db1
Why can't I see any of the db1 tables?
How can I restrict access to the sys. tables?
Thank you
View 3 Replies
View Related
Jan 30, 2006
Environment:SQL Server 2005 Enterprise in Win2k3 Enterprise on 32(x86) bit machine
I am able to enable the Trace Flag 1400 using DBCC TRACEON (1400) GO. Only then we can able to configure for the ENDPOINTS.
I successfully configured the ENDPOINTS for both the principal server and Mirror server .And then when I started the START MIRRORING.
I got the error message. Please find the Message below.
An error occured while starting mirroring.
additional Information:
:..>Alter failed for Database 'KQDB', (Microsoft SqlServer.Smo)
:..>An exception occured while executing a Transact-SQL statement or batch
[Microsoft SqlServer.Connection.info]
:..>Database mirroring Transport is disabled in the endpoint configuration.
[Microsft SQL Server,Error: 1486]
If anyone have a solution on how to setup a database mirroring environment.Please send.
View 10 Replies
View Related
Aug 15, 2012
We have occasional problems with transactional replication between 2 databases, and the problem is we dont notice right away. Usually the customer notices a few days after replication has stopped, and thats no good. We want to be notified as soon as there is any problem related to replication so we can go in and figure it out.
Ive been playing with the alerts, and it LOOKS like I should be able to do what I want, but after several hours I still cannot make any of the alerts work.
In my test environment, I'm forcing the following error, in order to try and test an alert: error 20598 "The row was not found at the Subscriber when applying the replicated command."
This seems to be one of our more common errors, and also its really easy to produce, so it seemed like a good candidate for testing the alert.
First off, I noticed that the agent profile was set to "Continue on data consistancy errors", which ignores error 20598. So I changed the profile to "Default", which doesnt skip any errors.
Next I set up a simple Job that simply writes a string to a file. I tested the job by calling it manually and it works. Once i can prove that this job is actually being called, I will change it to email me and the team.
Then I created a new alert in the publisher database which watches for error code 20598. Its response is to call the job I mentioned above. So when the error occurs, a string should be written to that file.
Then I forced the 20598 error to occur. I deleted a row in the subscriber DB, and then changed the corresponding row in the publisher. This causes the error to occur. In my replication monitor, I see new entries saying "Skipped 1 error(s) when applying transactions at the Subscriber." I'm not sure why it says skipped, but I know that these entries are the 20598 error that I'm trying to produce.
Now, there was nothing written to my text file, and I can see from the job history that my job was never called. If I look at the history of my test alert, it says "never occured".
I forced the 20598 error to occur, and I have an alert that is watching for the 20598 error, but it never fires.
I also created an alert in the subscriber database, watching for the same error. This alert was not called either.
View 5 Replies
View Related
May 23, 2006
Hello,
I am trying to setup merge replication for a sqlmobile database. I was able to set it up on a test environment which the sql instance and the iis were on the same box. I am trying now to go live. Our sql instance is on another box than the iis. I am now getting a 404 error when trying to test in the url https://www.domain.com/sqlmobile/sqlcesa30.dll?diag Is there a walk through for iis running on a different box, or does someone know of a solution?
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
View 3 Replies
View Related
Nov 20, 2007
Hi!
I have a WM5 device with Sql Server CE 3.0 and Sql Server 2005 on the serverside. I set up RDA and it works fine until I try do pull a little more advanced query. Instead of pulling a simple table with where clause I created a query that joined two tables returning values from only one. It doesn't seem to be possible, is it? If it's not, is it someway I work around this?
/Magnus
View 4 Replies
View Related
Mar 21, 2007
When installing SQL Server 2005 Express and using an .ini file that looks like this,
SECURITYMODE=SQL
ADDLOCAL=ALL
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
INSTANCENAME=DBSERVER
SAPWD=Westtech#1
sometimes the sa password is set correctly, while other times it is not. There does not appear to be any particular environment or system setting when it fails vs. when it works.
We are coming up on a release date and this is causing us a serious problem. Can anyone help?
Thank you,
Kathy Mook
Westbrook Technologies, Inc.
View 1 Replies
View Related
