Cannot Create A Connection To Data Source 'xxxxx' When User Runs Report
Dec 6, 2007
We have a new installation of sql server 2005 reporting services.
we can deploy reports without a problem users can connect to report server
but when they try to run reports they get this error msg.
An error has occurred during report processing.
Cannot create a connection to data source 'xxxxx'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
in reporting services the datasource credentials are saved on the server
View 3 Replies
ADVERTISEMENT
Apr 27, 2007
Hi all,
I am trying to view report that i deployed to reporting service but when i try to view it, it gives error:
An error has occurred during report processing.
Cannot create a connection to data source 'INVC'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
the datasource is ODBC
View 3 Replies
View Related
Jan 22, 2008
Hi,
When I view a report, I get the error message:
An error has occureed during report processing.
Cannot create a connection to data source "data source name"
Cannot open database "database name" requested by the login, The login failed, Login failed for user "username".
The data source will connnect to my OLAP server and I believe I have right to access the OLAP server.
Why the error occurred? Somebody can help me? Thanks very much!
View 4 Replies
View Related
Mar 6, 2006
Why is it that sometimes I get this error and sometimes not after I deploy the same shared data souce to my Report Server?
Even if I try deleting the datasouce through Report Manager the redeploy it from VS 2005, it still errors out when I run my report. I am able to run my report fine in VS.
An error has occurred during report processing.
Cannot create a connection to data source 'mydatasourcenamehere'.
For more information about this error navigate to the report server on the local server machine, or enable remote error
View 3 Replies
View Related
Mar 8, 2006
I cannot get this error resolve either for myself or any users, and I'm actually part of the Admin group! Furthermore, a user with whom I'm tring allow to view this report keeps getting prompted for their windows username and password. I thought that since this datasource was set to Windows Authentification that it would just pass it through?
I'm pulling my hair out at this point:
Screen Shots:
http://www.webfound.net/datasource_connection.jpg
http://www.webfound.net/datasource_connection2.jpg
http://www.webfound.net/datasource_connection3.jpg
Also As far as I know, I've given sufficient permissions to the right logins and right users on my SQL Databases and related stored procs that the datasets (not datasource) run
An error has occurred during report processing.
Cannot create a connection to data source 'datasourcename'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
View 4 Replies
View Related
Mar 30, 2007
Hello everyone,
I posted the same issue before, but I couldn't find the solution yet. I am posting this agian cos I tried almost everything and I am not able to solve the issue.
Let me explain what is happening here:
Server A - is my development local machine
Server B - is the remote reporting server, where all reports are deployed
Server C - is where the databases are located
- After successfully deploying the project (the reports and datasources) on the remote server and try to run the report , I am getting the following error message
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'dsCallB'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
- I tried to deploy and run the same report on my local machine report server(Server A), which is still accessing the same database from Server C. This works fine.
So from this we can understand that A ==> B ==> C is not working, however A ==>C works fine(using Server A as a report server).
I almost tried all the possible solutions that are posted on the forum, such as storing the credential information on the report server (server B), created a data source, which is not a shared data source, on the report server level e.t.c. and I ended up with nuthin.
The weired thing is that there are existing reports that are already created and deployed(by somebody else) in the report server (server B) , which access the database on Server C. These existing reports run with no problem, even I can create a report which uses the existing data source and runs perfectly. However, when I create a new report which uses a different data source (from Server C), and deploy it to Server B and tried to run it, the above error message comes.
Please let me know if you have any idea.
Thx.
View 9 Replies
View Related
May 4, 2007
Hi!
I've created a project includen 3 reports based on following code on 3 server. The report includes 3 different datasources an 3 different report. All 3 reports are grouped on Database and summerizad zise.
SELECT
SD.name [Database],
SMF.name [File],
SMF.size [Size]
FROM
sys.master_files SMF INNER JOIN sys.databases SD
ON SD.database_id = SMF.database_id
I can run all reports in Visual Studio (preview). But I can only run one the reports after depolying the project! I get this message when I raun the other 2 reports:
An error has occurred during report processing.
Cannot create a connection to data source 'uasql02_datasource'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I tried running the report from an server (where reportingservices is installed) finding that all the reports works as they should. I logged in another server with the same credentials. I got same message on the server as I get on my own camputer, "Cannot create a connection to data source ..."
Is there anybody out there having same problem as I, or someone who has any suggestion?
Thanks for any suggestion!
/*
Fari Sah
*/
View 1 Replies
View Related
Dec 11, 2007
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
Can someone tell me what is wrong?
View 1 Replies
View Related
Apr 20, 2006
I successfully created the a Report model and deployed it to the server. When i run the a simple report on the SQL Server where reporting Services is installed it runs fine. When I run the report from anywhere else, I get the error below. I don't have a datasource called 'dataSource1'.
*******************************************************************
For more information about this error navigate to the report server on the local server machine, or enable remote errors
----------------------------
Cannot create a connection to data source 'dataSource1'.
----------------------------
An error has occurred during report processing.
*******************************************************************
Thanks for any help!
View 7 Replies
View Related
Nov 14, 2007
I have installed Operations Manager on one server and Reporting Services for Operations Manager on another. When I attempt to run reports from Operations Manager, I receive the following message: Cannot Create a Connection to Data Source "DataSource1" Any suggestions?
View 2 Replies
View Related
Apr 22, 2008
Hi,
I have setup SSRS with 3 data models using 3 different datasources on one server. I can create reports ok, but if any of the other users I want to access these reports tries to open the report I created or run there own reports (they can create a report), it gives them the error:
Report Execution Error
Cannot create a connection to the data source 'datasource1'
I do not recieve this error, but the other users do. I have set the other users as System administrator in the site-wide permissions, so they have access to everything.
Everything is set to integrated windows authentication.
On the Reporting Server Configuration Manager, the Unattended Execution Account is not selected and is blank.
What could cause these users not to be able to run existing or new reports they create?
Thanks for any help,
Steve
View 1 Replies
View Related
Mar 6, 2006
No matter how many times I redeploy my report and data sources from my project to Report Manager, I keep getting this error when trying to run the report from Reprt manager. It runs fine in VS 2005 though. I don't know what else to do. I see no way to delete the report from Report Manager in attempts to try to redeploy it from scratch either.
An error has occurred during report processing.
Cannot create a connection to data source 'myservername'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
View 7 Replies
View Related
May 10, 2007
created an Oracle datasource (tried both ole db & oracle client) in Visual Studio 2005 report project - works fine connecting and preview of report within ide , deployed to Reporting Services web server, received the following error when attempting to run the report on web server:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'oracle'. (rsErrorOpeningConnection)
System.Data.OracleClient requires Oracle client software version 8.1.7 or greater.
web server has oracle client 10g installed and connecting to db ok through sql plus (this server also is loaded with VS2005 and the SqlServer2005 db)
any thoughts or direction greatly appreciated
View 5 Replies
View Related
Mar 8, 2006
I cannot get this error resolve either for myself or any users, and I'm actually part of the Admin group! Furthermore, a user with whom I'm tring allow to view this report keeps getting prompted for their windows username and password. I thought that since this datasource was set to Windows Authentification that it would just pass it through?
I'm pulling my hair out at this point:
Screen Shots:
http://www.webfound.net/datasource_connection.jpg
http://www.webfound.net/datasource_connection2.jpg
http://www.webfound.net/datasource_connection3.jpg
Also As far as I know, I've given sufficient permissions to the right logins and right users on my SQL Databases and related stored procs that the datasets (not datasource) run
An error has occurred during report processing.
Cannot create a connection to data source 'datasourcename'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
View 23 Replies
View Related
Apr 3, 2008
I have set up a report on reporting services and deployed it on a server. (server A)
The data comes from 2 databases - one on Server A and one on server B
I can view the reports when logged into Server A, but if I try to view them from a networked PC I get the following message:
An error has occurred during report processing.
Cannot create a connection to data source 'byvshs01'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Byvshs01 is Server B.
However, if I remove the data from server B from the report, I can view it ok. So it seems you can view data from a DB located on the server that hosts the reports, but not if the DB is located elsewhere.
Is there any way around this?
View 6 Replies
View Related
Apr 21, 2015
An error has occurred during report processing. (rsProcessingAborted)...The execution failed for the shared data set 'DataSet1'. (rsDataSet ExecutionError )...Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)...the above error message I get on the published report, but everything works fine when I do a preview in Visual Studio.How can I see exactely what is wrong?
View 22 Replies
View Related
Jan 2, 2007
I have an issue when using Report Manager for viewing reports that use a certain Oracle data source. When viewing the reports in Report Designer the reports display without problems. But when trying to display the reports with Report Manager, after deploying the reports to the Report Server, I now get the following error message:
blablabla....ORA-12705: invalid or unknown NLS parameter value specified
For testing purposes I am running Report Designer, Report Server and Report Manager locally on a PC with Windows XP. I am using Reporting Services 2005, IIS 6, Visual Studio 2005, an Oracle 9.x client and an Oracle 9.x (not 100% sure) database that is hosted on a remote server.
Earlier I got an error message that stated "ORA-12154: TNS: could not resolve the connect identifier specified". Access rights to some Oracle folders for the Network service account did the trick here but then I got the "NLS parameter" error message. What I have tried to do is removing the NLS_LANG register variable and also modified the value of the variable so that it matches the value of the NLS_LANG variable on the server that hosts the Oracle database, but none of them have worked. Any ideas?
Maybe this is an issue that is more appropriate in an Oracle forum but what the heck..the problem could reside in Reporting Services..
Thanks, Stefan
View 1 Replies
View Related
Jun 2, 2015
I want to create a datasource but the credentials I want to use will be based on the user running the report rater than hard coded.
I have tried using Windows Integrated Security but all i can is cant log in as NTAnonymous User?
View 8 Replies
View Related
Mar 13, 2008
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
View 1 Replies
View Related
Mar 2, 2007
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
View 2 Replies
View Related
Dec 7, 2006
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
View 3 Replies
View Related
May 8, 2007
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
View 1 Replies
View Related
Mar 30, 2007
Hello,
I've created a SSIS Solution and have created Data Sources. I have two packages. One was created before the Data Sources, and one was created after. The package that was created after is using connections from the Data Sources. I want to change the package before the Data Soruces were created to use them, but when I right click in the Connection Managers pane "New Connection From Data Source.." is not an option.
Did I not add it to the Solution properly?
How do I get it to show?
Did I not refresh something?
Please provide the how if you figure it out.
Thanks
View 4 Replies
View Related
Aug 28, 2015
I have few reports under different folders in Report Manager. Is there a way to set the data source for the whole folder rather than each report individually? There is also a folder where reports generate dynamically. Since the report project doesn't exist anymore, I can't set the data source through code. How can I set the data source for the whole folder?
View 7 Replies
View Related
May 17, 2006
Hi all,
Can someone explain it to me why I am getting the following error when I try to connect SQL server express with .NET 2.0?
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Here is my code and i am using windows authentication:
<%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %>
<%
Dim connAkaki As SqlConnection Dim cmdSelectAuthers As SqlCommand Dim dtrAuthers As SqlDataReader connAkaki = New SqlConnection("Server=.SQLEXPRESS;database=akaki") connAkaki.Open() cmdSelectAuthers = New SqlCommand("select Firstname from UserTableTest", connAkaki) dtrAuthers= cmdSelectAuthers.ExecuteReader() While dtrAuthers.Read() Response.Write("<li>") Response.Write(dtrAuthers("Firstname")) End While dtrAuthers.Close() connAkaki.Close() %>
View 2 Replies
View Related
Jan 18, 2008
As I try to create a Data Source for SQL-server I get an error message saying that either the Database does´nt exist or that access is denied. The obviously existst, so I guess there has to be a problem with the access? Does anyone know what is wrong?
Thanks in advance!
View 2 Replies
View Related
Apr 20, 2008
Hi,
I need to connect to a sap bw cube and when i try to create Data Source everything is going well but i can't see my cubes in the catalog field.
any one have experience with it??
Thanks.
View 9 Replies
View Related
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related
Jan 12, 2015
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
View 1 Replies
View Related
Feb 19, 2007
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
View 3 Replies
View Related
May 21, 2008
in the following i'm trying to create a sqldatasource and link it to a drop down list, is it possible?
Protected Sub DDL_Selections_SelectedIndexChanged1(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDL_Selections.SelectedIndexChanged
If Me.DDL_Selections.SelectedItem.Text = "All" ThenDBconn = New System.Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True")
DBcmd = New System.Data.SqlClient.SqlCommand("SELECT [DateEntered], [From], [To], [Company], [Catagory], [Client], [Description], [TotalHours] FROM [JcpowersJobs] ORDER BY [From]", DBconn)DBSDA = New System.Data.SqlClient.SqlDataAdapter("SELECT [DateEntered], [From], [To], [Company], [Catagory], [Client], [Description], [TotalHours] FROM [JcpowersJobs] ORDER BY [From]", DBconn)
Me.DDL_Selections.DataSourceID = "DBSDA"
End If
End Sub
View 3 Replies
View Related
Aug 9, 2007
Hi guys,
I have a number of reports deployed on the report server. I want to point all these reports to another data source. Currently, what I am doing is go to the individual report on the report server and change the data source property to point to the new data source. It is very tedious to do the same thing for all of the reports.
So, Is there any way to point all the reports under a project at one time.
Any idea is appreciated.
Thx!
View 4 Replies
View Related
May 26, 2008
Hi all,
I encountered a problem when I tried to generate .rdl report in my PWA website integrated with report server. In the "Manage Data Source", when I set the credential type to "Windows authentication (integrated)", it works.
However, when I changed it to "Stored credentials" with the windows account as the Login, the following error occurs:
An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CustomizedDB'. (rsErrorImpersonatingUser)
Logon failed. (rsLogonFailed)
Logon failure: the user has not been granted the requested logon type at this computer. (Exception from HRESULT: 0x80070569)
Does anyone know the reason behind? Thanks in advance.
The problem also happens when "Prompt for credentials (use as Windows Credential)" is used.
View 1 Replies
View Related
