I have SQL Server Express 2005. I have it configured for remote connections, but I cannot even see my local dbase. I have the server setup for windows authentication. In VB 2005 database connection wizard I see the db server but on the database itself.
When I click test connection....without a dbase choosen it says ( i don't have any to choose from).
"An error has occured while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server"
This doesn't make sense because i have changed the the surface area configuration to allow remote connections on both TCP/IP and Named pipes. It shouldn't matter though because this is a local database.
See above. At first I thought it was a problem with SQL server, since I have just installed a new certificate. Now I am not so sure. Any suggestions???? Thanks, kreid
I am getting the "Error Locating Server/Instance Specified" message. The part I find most confusing is that I am connecting to my database locally. I have read the recommendations on the blog posted here:
and implemented them to no avail. The confusing part is that I only have this problem on one particular application, which I am not the original author of. When I build my connection to the very same server (different database) using the Data Source configuration wizard, it works just fine. Any help would be greatly appreciated.
Hi SQL folks, I've googled for this the whole yesterday and I couldn't find a complete solution. I'm having a sql2005 database in my development machine and I need to copy all the content "Tables, Diagrams, PK columns and other data" to the remote production machine. Using the Import/Export method didn't copied the relationships between tables, also it turned the PKs into just a standard columns Can anyone help?
I have had a new PC and have installed SQL Server. However, I do not seem to have anywhere to create databases on my PC. I did on my old one. How can i do this ?
Sql server type: database engine server name: authentication: sql server authentication login: sa password: xxxxx
I remember the server name being sqlexpress (I think that was the default name during the install).
OR are they asking for my computer name? because I tried that also and it gave me an error saying "the default installation doesn't allow remote connections"
Hi, i wondered if anyone could help me with my stored procedure. It updates a table with users messageboard and saves the Title, Line 1, Line 2 and so on into a XML thats stored in the column named XML_Data.
How can i then output this xml to a file on my local machine?
T-SQL :-
ALTER PROCEDURE [dbo].[prUpdateMessageBoardVetted]
I have SQL Express running on my laptop but are unable to connect to the default database paulm-laptopsqlexpress
When I try to connect I get the error message TITLE: Microsoft SQL Server Management Studio Express An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
Everything is on my laptop whcih is running Vista Business as an administrator
Apologies if this is a dumb question, but I'm tearing my hair out over the basics when I should be spending time learning ASP.NET 2.0 and C#. I've searched the archives and a lot of people seem to be getting the same error as me, but when trying to connect from remote machines.
I'm getting what seems to be a standard message ...
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I'm not trying to connect remotely, I'm on my developer machine. The error comes up when trying to connect from within VS2005 (Tools, Connect to Database). It also comes up if I create a new web-site and go to the ASP.NET configuration tool (this is, I guess, trying to create the necessary database behind the scenes but is unable to connect to the database).
I suspect the error might be related to one or more of the following ...
September last year I installed VS2005 Express and SQL*SERVER Express. Both were fully un-installed when I bought VS2005 Professional before installing the new product. When I set up SQL*SERVER 2005 Developer I remember choosing an option to have a separate user on my PC with administrative rights. Actually I don't recall much about what I chose but I can't find out where those permissions are managed from. I've followed various instructions to check that remote access is enabled (despite the fact that I'm local, not remote). TCP and Named Pipes are both enabled (and I stopped then restarted SQL Server). I've checked that the service is started. The odd thing is that I have had an application connect with the following string ...
SSLCon = new SqlConnection(@"Server=(local)SSLMJ;Integrated Security = True;" + "Database=SSLTESTRESULTS");
Though the application connection seems to work ok, I think I'm missing out lots of developer functionality because I can't get VS2005 to see the database or server.
First of all let me explain that I am a complete newbie to this SQL stuff. I am in the process of reading a book, and followed the books suggestions for what I want to do, but it doesn't work. I know this has been covered several times in this forum, but no one post in particular covered exactly what I want to do.
I want to copy the database from the server to my local machine.
First, do I need to have SQL running on my machine in order to copy the database? I do have Enterprise Manager running, does that mean SQL Server is running locally?
Secoond, I tried using the Copy Wizard, but when I get to the target list, my local machine is not listed. How do I get it listed so I can copy the database?
I hope my questions are not too stupid... but then I'd be stupid if I didn't ask questions.
This may be a stupid newbie question, but being that I'm not a DBA I'm going to ask it anyway.
We discovered a problem with a clients server (Windows 2003 SBS) when we tried to install Veritas Backup Exec. Backup Exec requires an instance of either SQLMSDE or full SQL. This server has full SQL 2000 sp3a installed on it with a working account application. When backup exec trys to create it's instance it fails.
Investigating further...when I go into Enterprise Manager (logged in as Domain Admin) I get an error when I select the local server.
I.E. "A connection could not be established to (LOCAL). Reason: Data source name not found and no default driver specified. Please verify SQL Server is running and check your SQL Server registration properties. blah blah blah.
Okay the server is running. The accounting application (client/server) is still working. I right click on the server and select "New Server Registration" for the field "server" I click the browse button and the "Active Servers" box is empty..:shocked:
I went to check the "Data Sources" under drivers, that field is blank. (no drivers installed). I downloaded MS's component checker and it says "MDAC 2.8 on Windows server 2003 sp1" is installed.
At this point I have exhausted my knowledge of MS-SQL server. My goal is to get BackupExec installed and NOT break the existing accounting application.
Here is the connect tring from table properties:ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;WSID=VICRAUCH;DATABASE=vgs_prod;TABLE=d bo.USysCandidatesHere is the connect string from the ADO .Open connect string:"ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;UID=sa;PWD=xxxXX99X;WSID=VICRAUCH;DATAB ASE=vgs_prod"Here is the ADO .Open code. Set CNN = New ADODB.ConnectionDim strDEFConn As StringstrDEFConn = FixConnStr(DEFCONN)CNN.Open strDEFConn The last line fails with the CNN.Open strDEFConn with this message:Run-time error '-2147467259 (80004005)';[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This code works when the SQL Server is on it's own server, but for testing at my own office, I have SQL Server on the same machine as the Access application. I'm getting the above error where SQL Server and the Access app are on the same machine. I can open a linked SQL table from the user interface, and VBA code that deals with the tables as Access tables works. It is the ADO .Open statement where the error happens. Thanks for any help you can give me on getting this to work.
how to deploy web services on local machine. I created self certificate in IIS and then build the solution in the visual studio. After I build the solution, I found that automatically it created the virtual directories for the web services under the default website in the IIS Manager. When I click and select the browse it is not working.
How to create a db in clients local machine with sql server ce and .net?Is any sample applications available?so,that later i can sync the data to the sql server db. Please help.I am new to sql server ce.
I was trying to load SSIS shipped from my colleague. It has configuration file with his SSIS. I added this one to my local project. I removed configuration file from my project. In case anything goes wrong, I also delete OLE DB Connection String, and recreated one. Modified all data flow and control flow for any connection to point to my new one.
After the modification, it still fails on login 'sa'. I cannot figure out the problem. Is there any tricky inside of SSIS configuration file?
I am trying to create CLR stored procedure in VS 2008. Within the procedure, I need to connect to an Informix database using the Ifxoledbc driver. We have other applications using this driver, so it wouldn't seem to be a probmlem with the driver itself. However, I get this error from SQL 2005 when I try to make a connection from my CLR code. It must have something to do w/ sql server, but not sure what. Any ideas?
I have an interesting problem. I am running xp pro and when I try to connect to an instance of SQL2005 running on WIN2003 using SQL Sevrer Management Studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
This instance is protected by a vpn and is running on a clustered environment. I can connect to other SQL2000 servers that are running on a clustered environment and SQL2005 that is not clustered.
After adding a host file entry, I was able to connect to the server using OSQL. I was able to telnet into the port the server is listening on.
Others in my group can connect to the server using SQL Server Management Studio with no problems. They are running Win2003 Server. I originally could connect to this server, but I needed to change my password. After that I lost my remote connectivity. I can RDP into the server and map drives to the server. I map to a local administrator of this machine.
Hi and thanks in advance for your help. I have a dilemma and I need some expert help with this. I am trying to make a copy of a remote Database and then replicated the DB and it's contents on my local machine so I can build a test site to run data with. I tried to remot into the server machine but I guess that feature is not allowed by the honest of the remote machine. Since I build on my local machine and would like to be able to test data on my local machine.... I would like to copy the remote DB to my local computer and then I can run my test app on my local server. The version of SQL on the remote machine is SQL Express 2005 and I have SQL 2005 on my machine. Please give me how to accomplish this please.
I have a SQL Server 2014 installation on a server (CHRIS-PCCHRISSQL).I have SQL Server 2014 management studio installed on local server called Pootle.I have gone through the configuration on server (CHRIS-PCCHRISSQL) inc the following:
(1) I have set up a user on CHRIS-PCCHRISSQL called sqladminuser at server level with the Server Roles of 'Public' and 'SysAdmin'
(2) The computers are both on the same homegroup.
(3) On Chris-PC , I have opened up the firewall port 1433 as Inbound Rule
(4) On Chris-PC, Within SQL Server Configuration Manager,the 'SQL Server Network Configuration for Protocols for CHRISSQL' have been set up as follows:
- The TCP protocol is enabled - I have set up IP2 as follows:
Active: Yes Enabled: No IP Addres: 192.168.0.3
However when I try to connect from SQL Server Management Studio 2014 on my local machine Pootle to Chris-PCCHRISSQL using SQL Server Authentication with the user sqladminuser
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)how to set up a remote connection from SQL Server Management Studio on my local machine Pootle to CHRIS-PCCHRISSQL
Hi all,After merged two partitions into one (C: and D: into one C:) byusing Partition Magic, I can't start SQL Server 2000 which waspreviously installed in both C:Program FilesMicrosoft SQL Server80and D:Program FilesMicrosoft SQL ServerMSSQLThe original files in D: (every thing in D: actually) are now copyedin C:Data folder.Other than re-install SQL Server in C:, is it possible to restoredata(files) from D:Data ?Mank thanks to any suggestions/hints.Kind Regards,Bob
We currently have a PPTP connection set up for our developers toaccess our development SQL server through a VPN tunnel. When theyneed to copy tables up to the dev SQL from their local machine theysimply do a DTS copy.However, we are now moving to a thin client solution where they willbe working on a terminal server. They will have access to thedevelopment SQL servers and SQL tools such as EM and QA. However,they will not have access to their local SQL server and, therefore,will not be able to directly perform DTS copies. We have exploredseveral possibilities such as exporting tables to a .csv or .mdb fileand then importing them on the development SQL server but this is notideal because things are lost in that process (e.g. primary keys,field names, data types, etc.)My question is this: Is there a way to export and then import SQLtables without losing dependent objects such as primary keys and datatypes in the process? If any of you are working with a similarsituation I would really like to hear how your remote users copyobjects from their remote location to your SQL servers. Thanks!Ryan--Posted using the http://www.dbforumz.com interface, at author's requestArticles individually checked for conformance to usenet standardsTopic URL: http://www.dbforumz.com/General-Dis...pict211310.htmlVisit Topic URL to contact author (reg. req'd). Report abuse: http://www.dbforumz.com/eform.php?p=722630
I am having strange errors with a package when running locally that has not been an issue before.
The main symtom is that several Data Flow Tasks are either not inserting records on the destination or are only inserting 1 single record before the package errors with the error shown below.
Strangely, the debugger will show X # of records from source and destination, but either no records are actually written or, again, in many cases, only 1 single record is written. This is very strange.
App, System and Security logs yield no indication of security or other errors. All I have to go on is the above anomolies and the error message provided below.
Below is the error message, can someone help me decrypt it?
Many thanks,
Rick
Error: 0xC0202009 at DFT_LoadProcessUnits, OLE_SRC_VLD_PROC_TDV_RESULT [1]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
Error: 0xC0047038 at DFT_LoadProcessUnits, DTS.Pipeline: The PrimeOutput method on component "OLE_SRC_VLD_PROC_TDV_RESULT" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "SourceThread3" has exited with error code 0xC0047038.
Error: 0xC0202009 at DFT_LoadProcessUnits, OLE_SRC_DimEntities [199]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: An existing connection was forcibly closed by the remote host.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available.
".
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047038 at DFT_LoadProcessUnits, DTS.Pipeline: The PrimeOutput method on component "OLE_SRC_DimEntities" (199) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at DFT_LoadProcessUnits, DTS.Pipeline: Thread "WorkThread4" has exited with error code 0xC0047039.
Information: 0x40043008 at DFT_LoadProcessUnits, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at DFT_LoadProcessUnits, OLE_DST_FactResults [2076]: The final commit for the data insertion has started.
Information: 0x402090E0 at DFT_LoadProcessUnits, OLE_DST_FactResults [2076]: The final commit for the data insertion has ended.
Information: 0x40043009 at DFT_LoadProcessUnits, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at DFT_LoadProcessUnits, DTS.Pipeline: "component "OLE_DST_FactResults" (2076)" wrote 0 rows.
One of my co-worker changed the sa password today. After that we are getting this error. The SA account gets locked every time. Even within few seconds of unlocking the SA account, it gets locked again. Error message is not clear as what session still using old password and causing the SA account to get locked? Any of our application does not use SA user to connect to databases. We have Tivoli installed on the same system and the GUI of tivoli has the correct password.
I am trying to establish a connection to an Oracle database using the following code in a script task:
Dim oOleDbConnection As OleDbConnection Dim sConnString As String = _ "Provider=OraOLEDB.Oracle;" & _ "Data Source=DBxxx;" & _ "User ID=Userxxx;" & _ "Password=Passxxx" oOleDbConnection = New OleDb.OleDbConnection(sConnString) oOleDbConnection.Open() When I execute the script task, I receive the following error: The 'OraOLEDB.Oracle' provider is not registered on the local machine. Am using the correct provider? I do not know how to resolve the said error. Here are some facts: Oracle 8i is installed. Tnsnames.ora is updated. I have successfully connected to Oracle SQL *Plus to test the above credentials. Please help. Thanks.
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK Name: ReportServer1 Website: Default Web Site
ii) Report Manager Virtual Directory Name: Reports1 Website: Default Web Site
iii) Windows Service Identity Service name: ReportServer Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup Servername €“ Nameofmyserver Database name - ReportServer1 Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
I have an online SQL Server database provided by an ISP. I do not havepermission to create a backup device and I understand this is normalpractice.I am not using Enterprise Manager to administer the online database.I know I can back up the structure of the database using SQLscripts.My question is:How do I back up on my own machine the data contained in the onlinedatabase tables I have created? If I were using Enterprise Manager Icould do it by downloading tables using the DTS facility but how can Ido it without Enterprise Manager?Is there some work around which I have missed eg creating a csv fileof the data?Best wishes for 2005 to all those helpful people in this newsgroup!John Morgan
I am in a situation where I need to get a copy of test database that ison production server running MSSQL 2000 Standard to my local machinerunning MSSQL 2000 personel. I tried to use the copy wizard where itappears I get connected to the source server OK but when I try toindicate the destination server which is my local machine I get errorspoping up about cannot connect to (local) etc.I am NOT a DBA just a programmer trying to get a local test environmentup to be more productive.Lsumnler
