Cannot Insert The Value NULL Into Column 'OrderID' -- BUT IT IS NOT NULL!
Apr 2, 2007
I am getting this error: "Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails." -- But my value is not null. I did a response.write on it and it show the value. Of course, it would be nice if I could do a breakpoint but that doesn't seem to be working. I'll attach a couple of images below of my code, the error, and the breakpoint error.
Server Error in '/' Application.
Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.
Source Error:
Line 89: sContact.Phone = sPhone.Text.Trim
Line 90: sContact.Email = sEmail.Text.Trim
Line 91: sContact.Save()
Line 92:
Line 93: Dim bContact As Contact = New Contact()
Source File: F:InetpubwwwrootOutman KnifeCheckout.aspx.vb Line: 91
Stack Trace:
[SqlException (0x80131904): Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlDataReader.HasMoreRows() +150
System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +214
System.Data.SqlClient.SqlDataReader.Read() +9
System.Data.SqlClient.SqlCommand.CompleteExecuteScalar(SqlDataReader ds, Boolean returnSqlValue) +39
System.Data.SqlClient.SqlCommand.ExecuteScalar() +148
SubSonic.SqlDataProvider.ExecuteScalar(QueryCommand qry) +209
SubSonic.DataService.ExecuteScalar(QueryCommand cmd) +37
SubSonic.ActiveRecord`1.Save(String userName) +120
SubSonic.ActiveRecord`1.Save() +31
Checkout.btnCheckout_Click(Object sender, EventArgs e) in F:InetpubwwwrootOutman KnifeCheckout.aspx.vb:91
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
View 8 Replies
ADVERTISEMENT
Jul 15, 2015
I have a flat file with the following columns
SampleID  Rep_Number  Product  Protein  Fat  Solids
In the flat file SampleID and Product are populated in the first row only, rest of the rows only have values for Rep_Number, Protein, Fat, Solids.
SampleID and Product are blank for the rest of the rows. So my task is to fill those blank rows with the first row that has the sampleID and Product and load into the table.
View 7 Replies
View Related
May 7, 2007
I am trying to create a drop down list with the possible usernames that you can send an email to.  Everything works fine except for the dropdown list and I get the following error message:Cannot insert the value NULL into column 'EmailTo', table 'db191165913.dbo191165913.Email'; column does not allow nulls. INSERT fails.The statement has been terminatedMy code is below:<%@ Page Language="VB" MasterPageFile="~/real_world/realworld_MasterPage.master" AutoEventWireup="false" CodeFile="send_messages.aspx.vb" Inherits="send_messages" title="Untitled Page" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:Label ID="email_label" runat="server" Visible="False"></asp:Label> <asp:SqlDataSource ID="emailsend_source" runat="server" ConnectionString="<%$ ConnectionStrings:IMS_DB %>" DeleteCommand="DELETE FROM WHERE [EmailID] = @EmailID" InsertCommand="INSERT INTO ([UserID], [EmailTo], [EmailFrom], [Subject], [Message], [Status], [Reply], [Forward], [UserName], [SentOn], [IP], [BrowserInfo], [DNSInfo]) VALUES (@UserID, @EmailTo, @EmailFrom, @Subject, @Message, '@Status', '@Reply', '@Forward', @UserName, @SentOn, @IP, @BrowserInfo, @DNSInfo)" SelectCommand="SELECT * FROM WHERE ([UserID] = @UserID)" UpdateCommand="UPDATE SET [UserID] = @UserID, [EmailTo] = @EmailTo, [EmailFrom] = @EmailFrom, [Subject] = @Subject, [Message] = @Message, [Status] = @Status, [Reply] = @Reply, [Forward] = @Forward, [UserName] = @UserName, [BrowserInfo] = @BrowserInfo, [DNSInfo] = @DNSInfo WHERE [EmailID] = @EmailID"> <DeleteParameters> <asp:Parameter Name="EmailID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="UserID" /> <asp:Parameter Name="EmailTo" Type="String" /> <asp:Parameter Name="EmailFrom" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="Message" Type="String" /> <asp:Parameter Name="Status" Type="String" /> <asp:Parameter Name="Reply" Type="String" /> <asp:Parameter Name="Forward" Type="String" /> <asp:Parameter Name="UserName" Type="String" /> <asp:Parameter Name="BrowserInfo" Type="String" /> </UpdateParameters> <SelectParameters> <asp:ControlParameter ControlID="email_label" Name="UserID" PropertyName="Text" /> </SelectParameters> <InsertParameters> <asp:Parameter Name="UserID" /> <asp:Parameter Name="EmailTo" Type="String" /> <asp:Parameter Name="EmailFrom" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="Message" Type="String" /> <asp:Parameter Name="Status" Type="String" /> <asp:Parameter Name="Reply" Type="String" /> <asp:Parameter Name="Forward" Type="String" /> <asp:Parameter Name="UserName" Type="String" /> <asp:Parameter Name="IP" Type="String" /> <asp:Parameter Name="SentOn" Type="datetime" /> <asp:Parameter Name="BrowserInfo" Type="String" /> <asp:Parameter Name="DNSInfo" Type="String" /> </InsertParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="username_email" runat="server" ConnectionString="<%$ ConnectionStrings:IMS_DB %>" SelectCommand="SELECT [UserName] FROM [Membership] ORDER BY [UserName]"> </asp:SqlDataSource> <asp:ValidationSummary ID="ValidationSummary1" runat="server" HeaderText="You must fill out the following forms:" ValidationGroup="email_send" /> <asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False" DataKeyNames="EmailID" DataSourceID="emailsend_source" DefaultMode="Insert" GridLines="None" Height="50px" Width="125px"> <Fields> <asp:BoundField DataField="EmailID" HeaderText="EmailID" InsertVisible="False" ReadOnly="True" SortExpression="EmailID" /> <asp:TemplateField HeaderText="To" SortExpression="EmailTo"> <EditItemTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("EmailTo") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="emailsend_source" DataTextField="UserName" SelectedValue='<%# Bind("UserName") %>' AppendDataBoundItems="True" DataValueField="UserName"> <asp:ListItem>-- Receiving User --</asp:ListItem> </asp:DropDownList> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="DropDownList1" Display="Dynamic" ErrorMessage="Message Receiver (To)" ValidationGroup="email_send"></asp:RequiredFieldValidator> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label1" runat="server" Text='<%# Bind("EmailTo") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="From" SortExpression="EmailFrom"> <EditItemTemplate> <asp:TextBox ID="TextBox2" runat="server" Text='<%# Bind("EmailFrom") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:LoginName ID="login_name" runat="server" /> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label2" runat="server" Text='<%# Bind("EmailFrom") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Subject" SortExpression="Subject"> <EditItemTemplate> <asp:TextBox ID="TextBox3" runat="server" Text='<%# Bind("Subject") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:TextBox ID="TextBox3" runat="server" MaxLength="50" Text='<%# Bind("Subject") %>' ValidationGroup="send_email"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ControlToValidate="TextBox3" Display="Dynamic" ErrorMessage="Subject" ValidationGroup="email_send"></asp:RequiredFieldValidator> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label3" runat="server" Text='<%# Bind("Subject") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Message" SortExpression="Message"> <EditItemTemplate> <asp:TextBox ID="TextBox4" runat="server" Text='<%# Bind("Message") %>'></asp:TextBox> </EditItemTemplate> <InsertItemTemplate> <asp:TextBox ID="TextBox4" runat="server" Columns="40" MaxLength="500" Rows="10" Text='<%# Bind("Message") %>' TextMode="MultiLine" ValidationGroup="send_mail"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="TextBox4" Display="Dynamic" ErrorMessage="Message" ValidationGroup="email_send"></asp:RequiredFieldValidator> </InsertItemTemplate> <ItemTemplate> <asp:Label ID="Label4" runat="server" Text='<%# Bind("Message") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> <asp:CommandField InsertText="Send Message" ShowInsertButton="True" ValidationGroup="email_send" /> </Fields> </asp:DetailsView></asp:Content>
View 2 Replies
View Related
Feb 2, 2014
Cannot insert the value NULL into column 'City', table 'DB_61318_itweb.dbo.Location'; column does not allow nulls.
INSERT fails.
<code>
create table country(country_code nvarchar(2), country_name nvarchar(255))
create table states(country_code nvarchar(2),state_code nvarchar(20),state_name nvarchar(255))
create table weblocations (country_code nvarchar(2), state_code nvarchar(20),city_name nvarchar(255),timezoneid varchar(255))
INSERT INTO Location
([Country],[City], [State] )
[Code] .....
View 3 Replies
View Related
Jul 12, 2007
I've 2 tables with a relation:
Customers
- CustId
- Name
- LevelId ==> FK relation to Levels.LevelId
Levels
- LevelId
- Description
What I want to do, is save a NULL value in the Customers.LevelId when no level is selected. I'm using C#, a CLR StoredProcedure and the DbType.Int32 for that column. When I try to save a null value, it says "cannot convert null to int", what is clear. But in the database it is possible to save a NULL value.
The question is: How to save a null value in a int column via a C# CLR Stored Procedure?
View 10 Replies
View Related
Oct 17, 2006
Hi dear experts:
The message is
"Cannot insert the value NULL into column 'ID_Month', table 'Database_DW.dbo.Incident_Summary'; column does not allow nulls..."
At my table, I have a primary key which make autonumber for any record set in column 'ID_Month'. How can I insert autonumber in column 'ID_Month'by SQL statement?
Thank you in advance.
View 12 Replies
View Related
May 3, 2007
I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies
View Related
Apr 20, 2008
Hello,
I'm working on a website that allows users to upload small JPEG files. I followed the article at http://aspnet.4guysfromrolla.com/articles/120606-1.aspx. On the webpage I'm using a formview control to insert new records in the database. As suggested in the article I removed the "type='object'" from the insert parameters for the image column. The data is saved by using a sqldatasource with stored procedures. The image column is of type varbinary(max) and allows null values. Everythings works fine as long as the user uploads an image. The data is saved correctly and on another page the image can be viewed. However if the user does not upload a picture and tries to save the new record the following error is thrown:
�Implicit conversion from data type nvarchar to varbinary(max) is not allowed. Use the CONVERT function to run this query.�
In the formviews iteminserting event I have the following code: Dim imageBytes(fileupload1.PostedFile.InputStream.Length) As Byte fileupload1.PostedFile.InputStream.Read(imageBytes, 0, imageBytes.Length) e.Values("Image") = imageBytes What code should I use in case the fileupload1 has no file? I tried something like: e.values("Image") = dbnull.value But that doesn't work. Any suggestions?
View 5 Replies
View Related
May 14, 2008
how do i insert null value to a column with 'int' datatype. This columnn is primary key. Please help.
Akhil
View 3 Replies
View Related
Sep 20, 2006
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
View 3 Replies
View Related
May 13, 2015
It's giving me an error while I'm trying to change column value from not null to null..
'tblid' table
- Unable to modify table. Â
Cannot insert the value NULL into column 'ValidID', table 'Xe01.dbo.Tmp_tblid'; column does not allow nulls. INSERT fails.
The statement has been terminated.
View 4 Replies
View Related
Jun 4, 2006
Hi friends,
when trying to save a diagram I got an error:
The sp_creatediagram procedure attempted to return a status of NULL, which is not allowed.
Whats with this????
View 3 Replies
View Related
Jan 12, 2008
Hello everyone,
I am having a little problem with a simple package and I do not know if this is a known issue or that I am missing something.
I have a data flow task, a simple one, with an oledb source pulling data, using a select statement, from a sql server 2005 instance, and an ole db destination pointing to a table in a sql server 2000 instance. Both intances are standard edition. The table in the destination has a column which allow null values and has also a default constraint (getdate()), and this column is not present in the source. When I map the columns in the destination, I leave this column as "ignore", not being mapped to any column from the source. The problem is that when I execute the task, SSIS is trying to insert NULL value into this column, so the package fail with the error "can not insert NULL value into column myColumn". I wonder why is it trying to insert NULL value if the column is not mapped to any column from the source.
Is this a known issue or I am nissing something in the settings?
If the destination table has rowversion or identity columns, there is no problem ar all. I ignore those columns in the mapping and SQL Server feeds them as expected.
Thanks in advance,
Alejandro Mesa
View 19 Replies
View Related
Jan 20, 2004
Cannot find an answer to this in previous posting, though there are similar topics.
My primary key "ID" requires a value (is not nullable), and not explictly providing it with one when I update a new record gives the following error:
Cannot insert the value NULL into column 'ID', table 'AdClub.mediaq.News'; column does not allow nulls. INSERT fails.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'ID', table 'AdClub.mediaq.News'; column does not allow nulls. INSERT fails.
However, trying to stuff that field with a recordCount+1 value (or any value), I get this error:
Violation of PRIMARY KEY constraint 'Primary Key'. Cannot insert duplicate key in object 'News'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'Primary Key'. Cannot insert duplicate key in object 'News'.
Cannot figure this one out. The value I'm providing for that field is known to be unique, but the SQL Server spits it out each time.
Is there a way to have the ID primary field automatically update with a new value when a new record is generated? This is how I used to do it in Access, but cannot find a similar feature in SQL Server. I'm sure I'm missing something simple, but right now I'm stuck in this "Catch-22" situation.
Please help!
View 5 Replies
View Related
Apr 27, 2007
Dear folks,
please tell me the query for altering a column from not null to null
Vinod
View 15 Replies
View Related
Feb 28, 2008
Hi all,
One of my columns is the table has some Null values, and I Would like to stop having NULL values into that column any more.
I know, If I alter the column to NOT NULL will throw me an error, since it does a batch update.
Is there any way to achieve this...
Thanks...
View 3 Replies
View Related
Feb 29, 2008
Hi all,
One of my columns is the table has some Null values, and I Would like to stop having NULL values into that column any more.
I know, If I alter the column to NOT NULL will throw me an error, since it does a batch update.
Is there any way to achieve this...
Thanks...
View 3 Replies
View Related
Sep 22, 2015
I received this stored procedure that I modified to run on my system. Specifically, I only changed the database and filter text and left the rest alone. When I execute the stored procedure, I get the error:
Msg 515, Level 16, State 2, Procedure ObjectNotesInsert, Line 18
Cannot insert the value NULL into column 'RefRowPointer', table 'pSCI_App.dbo.ObjectNotes'; column does not allow nulls. INSERT fails. The statement has been terminated.
Here is the actual stored procedure I am running. I should add that I can execute each step and get results and if I hard code the resulting values into the procedure, the execution works.Â
USE [pSCI_App]
GO
/****** Object: StoredProcedure [dbo].[_JAMTestSp] Script Date: 09/21/2015 11:32:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
View 30 Replies
View Related
Oct 20, 2015
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.Â
Is it possible through SSRS designer?
View 5 Replies
View Related
May 3, 2007
I have a report that is run on a monthly basis with a default date of null. The stored procedure determines the month-end date that it should use should it be sent a null date.
The report works fine when I tell it to create a history entry; however, when I try to add a subscription it doesn't appear to like the null parameter value. Since I have told the report to have a default value of null it doesn't allow me to enter a value on the subscription page.
Now, I suppose I could remove the parameter altogether from the stored proc, but then the users would never be able to run the report for a previous time period. Can someone explain to me why default values aren't allowed to be used on subscriptions when they seem to work fine for ad hoc and scheduled reports? This is really quite frustrating as most of my reports require a date value and default to null so that the user doesn't have to enter them for the latest data.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Key cannot be null. Parameter name: key
View 1 Replies
View Related
Nov 5, 2007
I run a stored procedure for which I have a return variable. The stored procedure returns the ID of a row in a table if it exists:
m_sqlCmd.ExecuteScalar();
The m_sqlCmd has been fed an SQLParameter with direction set to output.
When the stored proc returns, I want to test it. Now when there IS a row it returns the ID ok.
When the row doesn't exist, in my watch I have:
m_sqlParam.SqlValue with value {Null}
I can't seem to work out how to test this value out.
I've tried several things but none seem to work.
This line compiles ok, but the following runs into the IF statement as if the SqlValue is null??
if (m_sqlParam.SqlValue != null)....
{
// I'm here!! I thought the watch says this is null???
}
Sorry if this is obvious, but I can't work this one out!!
View 3 Replies
View Related
Mar 26, 2007
Looks like there was a fix and then I read this fix is not a fix. Does anyone know how this can be rectified? Does it mean that only Windows authentiation is the only way it works. The Software is over 2 years old, there are no excuses.
View 1 Replies
View Related
Jun 28, 2004
I would drop and add the table but the data can't be deleted. So if anyone could help with the statement it would be greatly appreciated. Thanks
View 7 Replies
View Related
Feb 26, 2004
I'm trying to set the concat... option to OFF
all the time and in all my databases
I tried this command
USE master
EXEC sp_dboption 'DatabaseName', 'concat null yields null', 'FALSE'
but it doesn't change anything
Select NULL + 'TOTO'
----> NULL
(it should be 'TOTO')
View 2 Replies
View Related
Aug 3, 2005
hi,my structure table in database:Amount float(53) not null default 0when i try to run his script:alter table ABC alter column Amount float(53) nullit can only set the Amount to allow null, but can't set the defaultvalue to empty.anyone know how to set the field to allow null and default set toempty, no value.thanks
View 5 Replies
View Related
May 3, 2006
Hello.
I've built a sample CLR function with the following declaration....
CREATE FUNCTION GetManager(@DeptCode nvarchar(3))
RETURNS nvarchar(1000)
WITH RETURNS NULL ON NULL INPUT
AS
EXTERNAL NAME Assembly1.[ClassLibrary1.MyVBClass].MyManager
And it works as expected, except when I use NULL:
DECLARE @MyManager nvarchar(1000)
EXEC @MyManager = dbo.GetManager NULL
PRINT @MyManager
It returns the value "Unknown" as it would have for any unknown DeptCode, as-programmed.
I'm of the theory it should have returned NULL without actually firing the function? Or is this only for non-CLR items... or stored procedures, not functions?
View 3 Replies
View Related
Oct 27, 2015
We have a case where in we should show date based on conditions for e.g if we had a column defined as
col varchar(10) then we would show col as 'NULL' for some condition and actual value when no condition
Normaly date values are stored here e.g under col 20150901 .
CaseÂ
when col>'20150901' then 'NULL'
else col
end as Derivedcol
Note this is an extract process and we are presenting data by pumping the data in a table .
Now there is another similar column -colz varchar(10) Â which stores date but doesnt have case condition so whenever date has no value its shows null which is database null.
So whats the difference between database null and string null ?
 How can we show database null for the case condition instead of string "null"?
View 10 Replies
View Related
Sep 12, 2006
i am using asp2003 and sql server 2000. in my SQL Server i am generating a field city_id automatically by incrementing the value by 1 and it is the primary key. so when i insert any data using my asp.net application it works fine on my system but it gives me error when i upload it to the web server. the error isCannot insert the value NULL into column 'city_id', table 'nevadb.nevauser.city_master'; column does not allow nulls. INSERT fails. The statement has been terminated.any help?
View 4 Replies
View Related
Jul 6, 2005
Dear all,If user left the field blank, i would like to insert null value into dbHowever, I get by using following codeAny Solution private void RunTest() { sqlConnection1.Open(); sqlCommand1.Parameters["@Time"].Value = DateTime.Now; sqlCommand1.Parameters["@Info"].Value = null; //Error appear !sqlCommand1.ExecuteNonQuery(); Response.Write("Executive successfuly"); sqlConnection1.Close(); }
View 1 Replies
View Related
Sep 20, 2001
How can we insert the null vales into the table..?
insert into test (4,NULL)
or
insert into test (4,'')
is this the right format..?
View 3 Replies
View Related
Feb 22, 2005
Hello Everyone,
This is my first time here.
I have been trying to turn off the "null" property for my id column.
And then I put yes for identity.
when i go to save it i get the error message,
"Cannot insert the value NULL into column 'ID'"
Can someone please help me out with this, its probably something simple, but i just cant figure it out.
Thanks,
PJ
View 4 Replies
View Related
May 12, 2008
Dear All,
I am populating some new tables from old tables, after I did some re-structuring to the database.
I have created a table with langID and langCode.
I also created a temptable, with the data being captured from an old table. The fields that are the most relevant at the moment are lid, and fk_langid.
In the old table, lid, has strings in it, for example en, fr, bg etc, and fk_langId will be the foreign key to the new table.
Now my problem is that there are some lid's which do not exist in the new table, and as so I need to hardcode an id for them in the new table.
So I was doing something like this:-
update #tempTable
SET fk_langid =
(
SELECT lid,
CASE
WHEN lid like '%sr%' THEN '1234'
END
FROM #tempTable
)
But I am getting an error:-
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
Can you help me out on how I can update the fk_langid in the temptable
View 4 Replies
View Related
Jul 11, 2014
I have a datetime field I'm inserting records into from a field that is int. So some of the values have 20141214 and some have zero.If the field is zero how do I insert NULL? I'm using this to convert a non zero value to a date.
convert(datetime,cast(picked_dt, as char(8)))
insert into oeordlin(
picked_dt
select
?????
from oeord2
View 6 Replies
View Related
