Cannot Install Anything But Workstation Components Etc.

Mar 4, 2008

Hi,

I had a perfectly good working copy of SQL Server 2005 installed. However, at some point I needed the Report Services Designer so I could edit my reports in Visual Studio. I inserted the CD and selected the feature from the list and it installed. Only problem being that it has completely removed my Management Studio and practically every other tool I didnt explicitly checked when installing the RS Designer.

When I tried to run the same Setup again and check everything, it tells me that there is no change between what I have selected and what is installed, which sounds like total bs to me, since my pc doesnt have a management studio etc anymore.

Out of pure misery I decided to remove my entire SQL Server installation, inc Instance, hoping to start anew and achieve the result I wanted with the least amount of frustration. I ended up here and followed it all the way: http://support.microsoft.com/kb/909967

When I started reinstalling, I ran into something new. The installer refuses to let me install anything but the Workstation components, books online and development tools. All the other options are greyed out and not even available.

Someone please help me get my SQL Server back up and running because I'm getting hopeless.

-DeV

View 5 Replies


ADVERTISEMENT

Can't Install Workstation Components

Mar 10, 2008



I've got VS 2008 Pro installed, as well as SQL Sever 200 (which I must keep installed). When I run the install for SQL Server 2005 developer edition, it continually fails to install

SQL Setup Support Files
SQL Native Client
Backward Compatability Files
SQLXML4
Workstation Components

I'm at a complete loss here. I've googled the problem, and apparently this is not uncommon. Is there a good resolution to this?

View 6 Replies View Related

SQL 2005 Fails To Install Workstation Components And Tools

Feb 15, 2007

Hello.

When I install SQL Server 2005, it all goes well except that it fails to install these two:

- SQLXML 4

- workstation components and tools

When I try to install these two from the CD in the Setup folder of the CD 2 with the files sqlxml4.msi and sqlRun_Tools.msi (if I remember these names correctly), it gives me an error:

'Ce package d'installation n'est pas pris en charge par ce type de processeur'

Sorry. My SQL CDs are in french, but it roughly translates to the message:

This installation package is not taken by this processor.

I thought that my hardware configuration does not meet the requirements. But I have a Pentium 4, 2Gig RAM, over 100Gig free HD space. Also I tried to install on other computers to no avail. This is a fresh install, that is, there is no previous SQL Server 2000 in it, no VS.NET 2005 or before. Nothing. I have just a fresh, new computer.

Can anyone help, please?

Jean

View 10 Replies View Related

Cannot Install Workstation Components (Management Studio,etc) (ADD_LOCAL Error)

Feb 27, 2008

I have Vista Ultimate (IIS Enabled), SQL Server 2005 Developer Edition
(downloaded and ran the SP2 Update), Visual Studio 2008. VS2008
installs no problem. When I install SQL Server 2005, I get an error
when it trys to install the last part( Workstation Components,
Management Studio, etc).
I have tried FULLY, MANUALLY removing all SQL products and registry
entries. I have used Windows Installer Cleanup Utility. I have tried
Microsoft's recommended way of manually removing SQL Server 2005.
If I manually run SqlRun_Tools.msi the error comes up right away.


The error is:
"A component that you have specified in the ADD_LOCAL property is
already
installed. To upgrade the existing component, refer to the
template.ini and
set the UPGRADE property to the name of the component."


Here's the Setup Error log: http://toby.pastebin.com/f63405e24
Any help?! Thanks!
-Toby

View 11 Replies View Related

Workstation Components Not Available At All On SS 2005 X64 CD For X86 XP?

Aug 9, 2006

It appears that there is no way to install SQL Server 2005 Workstation Components on an x86 operating system (XP in this case) if you have the x64 install disks (Standard Edition). Can someone verify this?

I am finding it hard to believe that workstation components for a standard Windows client environment are not distributed with the version of SQL Server that matches Windows 2003 x64.

Thanks,
Chris

View 1 Replies View Related

Uninstall SQL 2000 Workstation Components

Mar 28, 2008

Hey yall. I'm a DBA in a company where I do NOT have the ability tocontrol who logs into my SQL servers as administrator, so I'm lookingfor a way to uninstall the workstation components WITHOUT completelyuninstalling all of my instances. Does anyone know how to do this?All I can find is the complete removal option in add/remove, and theinstall cd setup doesn't have a remove function that I can find. Anyidea's?The reason for wanting to do this is so that every tom dick and harrythat logs in as administrator doesn't have the ability to just open EMand do what they please. I want to force people to log in fromanother box so I can get tighter control over who can access mydatabases. Any help is awesome, thanks!Joshua Austill

View 2 Replies View Related

Error Installing Workstation Components SQL 2005 Enterprise

Mar 20, 2006

Hello. I am trying to install only the Workstation Components portion of SQL Server 2005 and I get about halfway through and the installation errors out. The error is:

EventType: sql90setup
P1: installtoolsaction
P2: 0xc0000006
P3: 0x78158a35
P4: 0xc0000006
P5: setup_sqlactionenginelistener.cpp@198
P6: setup.exe@2005.90.1399.0
P7: none

This happens after the second disk of the installation is about halfway through installing and then it throws an error stating that "The wrong volume is in the drive. Please insert volume SQLSRVRS into drive D. Cancel, Try Again, Continue" I replace the disc with the first disc and if I pick "Continue" it will display the error above. If I pick "Try again" the installation finishes, but there are components missing from Visual Studio.

---------------------------------------------------------------------------------

Here is the log file:

=== Verbose logging started: 3/16/2006 14:03:49 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (58:00) [14:03:49:483]: Resetting cached policy values
MSI (c) (58:00) [14:03:49:483]: Machine policy value 'Debug' is 0
MSI (c) (58:00) [14:03:49:483]: ******* RunEngine:
******* Product: C:Program FilesMicrosoft SQL Server90Setup BootstrapSetupSqlRun_Tools.msi
******* Action:
******* CommandLine: **********
MSI (c) (58:00) [14:03:49:483]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (58:00) [14:03:49:483]: Grabbed execution mutex.
MSI (c) (58:00) [14:03:49:483]: Cloaking enabled.
MSI (c) (58:00) [14:03:49:483]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (58:00) [14:03:49:483]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:80) [14:03:49:499]: Grabbed execution mutex.
MSI (s) (D4:BC) [14:03:49:499]: Resetting cached policy values
MSI (s) (D4:BC) [14:03:49:499]: Machine policy value 'Debug' is 0
MSI (s) (D4:BC) [14:03:49:499]: ******* RunEngine:
******* Product: C:Program FilesMicrosoft SQL Server90Setup BootstrapSetupSqlRun_Tools.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:BC) [14:03:49:499]: Note: 1: 2203 2: C:Program FilesMicrosoft SQL Server90Setup BootstrapSetupSqlRun_Tools.msi 3: -2147287037
MSI (s) (D4:BC) [14:03:49:499]: MainEngineThread is returning 3
MSI (c) (58:00) [14:03:49:499]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:00) [14:03:49:499]: MainEngineThread is returning 3
=== Verbose logging stopped: 3/16/2006 14:03:49 ===

Thank you very much,

BJ

View 7 Replies View Related

Applying SQL 2005 SP1 To A Local Copy Of Workstation Components

Aug 7, 2006

I have installed the Workstation components on my local PC, which also contains VS 2005 and SQL Express. I installed the WS components so that I could run the full blown version of SQL Management Studio from my PC, to remove SQL 2005 servers.

I tried to update the Workstation components to SP1, but the SP1 package stops at the Setup Support Files, step and terminates claiming the package does not support SQL Express. I realize the package is not intended for Express, I simply need to update Management studio.

I tried running the Post SP1 Tools hotfix and it complains that it will not update SP0 of the tools.

I have successfully updated Express to SP1 and applied the Post hotfixes as well. Is there any way to patch just Management studio on a system with Express installed?

Thank,
Jim

View 2 Replies View Related

SP2 Didn't Upgrade SQL Server Tools And Workstation Components

Mar 13, 2007

Greetings,

I thought I had applied sp2 successfully but I discovered when I tried to apply the hotfix ( sqlserver2005-kb933097-x86-enu.exe), that the SQL Server Tools and Workstation Components wasn't at the 3042 level.

The recommendation in the log file is to:

"Update 3152 is dependent on prerequisite update 3042. Exit setup and refer to the Knowledge Base article to find the prerequisite patch."

Does anyone know where I find the prerequisite patch?

Any help would be appreciated.

Regards Noel



Time: 03/13/2007 18:05:39.045
KB Number: KB933097
Machine: NOEL_EVO
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3152
Command-line parameters specified:
Cluster Installation: No

**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed

**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (SQL2005) ENU SP1 2005.090.3042.00 x86 DEVELOPER
SQL Server Analysis Services 2005 (SQL2005) ENU SP1 2005.090.3042.00 x86 DEVELOPER
SQL Server Reporting Services 2005 (SQL2005) ENU SP1 9.00.3042.00 x86 DEVELOPER
SQL Server Notification Services 2005 ENU SP1 9.00.3042.00 x86 DEVELOPER
SQL Server Integration Services 2005 ENU SP1 9.00.3042.00 x86 DEVELOPER
SQL Server Tools and Workstation Components 2005 ENU SP1 9.1.2153 x86 DEVELOPER

**********************************************************************************
Products Disqualified & Reason
Product Reason
SQL Server Tools and Workstation Components 2005 The product instance SQL Tools does not have prerequisite update 3042 installed. Update 3152 is dependent on prerequisite update 3042. Exit setup and refer to the Knowledge Base article to find the prerequisite patch. Install the prerequisite and rerun the installation.

View 1 Replies View Related

SQL Server Management Studio Not Loading With Workstation Components

Jul 11, 2007

Everytime I do an install of SQL Server 2005 and I don't select to install all components (even if I make sure Workstation components and all sub components are selected) SQL Management Studio never loads. The setup completes without error however there is no SQL Management Studio anywhere on the system. I know I have searched hard for it. Has anyone else had this problem? Am I missing something?

Thanks.

View 7 Replies View Related

Sql 2005 Vista Ultimate Disc 2 Trouble Workstation Components

Apr 29, 2008

I am having trouble installing disc number 2 on sql standard 2005( I installed disc one) I get the message my workstation components are already installed etc.It will not allow me to go any further It seem like everything installed Here is my summary.... I unistalled vs 2 express 2005---I never used it......
Here is my list on my vista ultimate computer sql server business intelligence, sql server management studio, analysis services installed configuration tools documentation pefmorance tools Did I need to install disc 2 instead of disc 1?
one I am using vista Please help ? I tried opening business intelligence studio it says it has compability issues
Here is my log:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Professional (Build 6000)
Time : Tue Apr 29 14:13:59 2008

Machine : BILLPREC690
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_OWC11_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_OWC11_2.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BackwardsCompat_2.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLSupport_3.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_OWC11_3.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BackwardsCompat_3.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLSupport_4.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_OWC11_4.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BackwardsCompat_4.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLSupport_5.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLNCLI_3.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_OWC11_5.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BackwardsCompat_5.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLSupport_6.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLNCLI_4.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Visual Studio 2005 Premier Partner Edition - ENU
Product Version : 8.0.50727.42
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_PPESku_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_OWC11_6.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BOL_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_BackwardsCompat_6.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Integration Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_DTS.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : SQLXML4
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLXML4_1.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQL.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : SQLXML4
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_SQLXML4_2.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Analysis Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_AS.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Notification Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_NS.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Reporting Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_RS.log
--------------------------------------------------------------------------------
Machine : BILLPREC690
Product : Microsoft SQL Server 2005 Tools
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_BILLPREC690_Tools.log
--------------------------------------------------------------------------------

View 6 Replies View Related

SQL Server 2005 Installation Woes For Workstation Components And Client Tools

Apr 27, 2008


Hello,

I have installed successfully Microsoft SQL server 2005 in MSCS.

However the set up did not install Workstation components (client tools - SSMS etc).

I have successfully installed workstation components in one node of cluster.

However setup is giving following error while installing workstation components on other node. (From this node MS SQL server 2005 was installed).

Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup

There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

I did "C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, /setup".

It executed but no error, no output.

Any gues, help in isolating issue?

Any more information required.(Media is ok. Setup has been tried after reboot. There is enough disk space.)

Regards.

Mahesh
===========
Setup

1) Microsoft Cluster of two nodes.
2) Hardare - HP Blade servers
3) OS - Windows 2003 EE with SP2
4) SQL Server 2005 Standard Edition with SP2.

=============================

MSI (s) (B0:7C) [17:40:20:390]: Note: 1: 1722 2: SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A 3: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe 4: /setup
MSI (s) (B0:7C) [17:47:23:609]: Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup


MSI (s) (B0:7C) [17:47:35:921]: Note: 1: 1729
MSI (s) (B0:7C) [17:47:35:921]: Product: Microsoft SQL Server 2005 Tools -- Configuration failed.

MSI (s) (B0:7C) [17:47:35:953]: Cleaning up uninstalled install packages, if any exist
MSI (s) (B0:7C) [17:47:35:953]: MainEngineThread is returning 1603
MSI (s) (B0:A0) [17:47:36:062]: Destroying RemoteAPI object.
MSI (s) (B0:80) [17:47:36:062]: Custom Action Manager thread ending.

View 1 Replies View Related

Cant Install Workstation Com (ADD_LOCAL Error)

Feb 27, 2008

Cannot install Workstation Components (Management Studio,etc) (ADD_LOCAL error)

I have Vista Ultimate (IIS Enabled), SQL Server 2005 Developer Edition
(downloaded and ran the SP2 Update), Visual Studio 2008. VS2008
installs no problem. When I install SQL Server 2005, I get an error
when it trys to install the last part( Workstation Components,
Management Studio, etc).
I have tried FULLY, MANUALLY removing all SQL products and registry
entries. I have used Windows Installer Cleanup Utility. I have tried
Microsoft's recommended way of manually removing SQL Server 2005.
If I manually run SqlRun_Tools.msi the error comes up right away.

The error is:
"A component that you have specified in the ADD_LOCAL property is
already
installed. To upgrade the existing component, refer to the
template.ini and
set the UPGRADE property to the name of the component."

Here's the Setup Error log: http://toby.pastebin.com/f63405e24

Any help?! Thanks!
-Toby

View 2 Replies View Related

SSI And Other Components Don't Install

May 20, 2006

Hi

I have installed SQL Server 2005 but Integration Services is just not there. I have uninstalled and reinstalled several times and in the process uninstalled an old version of Visual Studio.NET (manually because it wouldn't uninstall automatically) and Visual Web Developer, just in case they were interfering with Integration Services. No luck, in fact it got worse, now Analysis Services also does not work because it can't find devenv.exe!

I have installed exactly this same software on another clean PC (ie. no previous Visual Studio variants on it) and it installs perfectly.

There seems to be some kind of clash between old versions of Visual Studio and SQL Server 2005 that prevents SQL Server from properly installing products like Integration Services that use the Visual Studio interface (ie. devenv.exe).

I now can't even reinstall the old version of Visual Studio.NET, and devenv.exe is nowhere to be found on my PC although it is referenced throughout the registry.

Has anyone got any suggestions, all I am after if a full and clean install of SQL Server 2005 so I can develop against it using Visual Web Developer.

Thanks

View 6 Replies View Related

Minimal Components To Install

Jul 25, 2006

Hi,

I have bought SQL Server 2005 Standard Ed. which will be used only to host databases for different applications like WSUS, McAfee Protection Pilot and CA Brightstor ArcServer.
I do not have intention to create corporate applications using SQL Server.

In fact, I am using the SQL Server as a "multiple MSDE database server"...

My question is what are the minimal components between the following features to install (as I do not not really what they are doing) :
-SQL Server
-Analysis Services
-Reporting Services
-Notification Services
-Data Tranformation Services
-Workstation Components

Thanks in advance
Eric

View 4 Replies View Related

SSIS Runtime Components Install

Mar 3, 2006

How can we install the SSIS runtime components alone.

We are calling SSIS packages from .NET code. We would like to know what are the minimum components we need to install in the machine in which the .NET code is running.

Thanks,
Loonysan

View 4 Replies View Related

Unattended Install Of Client Components

Jun 20, 2006

I'm trying to do an unattended install of the client components for SLQ2005. I have read the document on doing a install from the command prompt but when I use the "ADDLOCAL" switches I get some components that I don't require. For example, I am using the following command to run the setup - "start /wait <path>setup.exe ADDLOCAL=Client_Components,SQL_Tools90,Connectivity". When I look at the Add/Remove Programs list I can see that it has installed "MSXML 6.0 Parser", "SQL 2005 Backward Compatibilty" and "Office 2003 Web Components". The only components I require are the "SQL Support Files", "SQL Server Native Client" and " CLient Tools". If I run "start /wait <path>setup.exe REMOVE=SQLXML,TOOLS_BC_DEP" it will remove "Office 2003 Web Components" and "SQL 2005 Backward Compatibilty" but not the "MSXML 6.0 Parser". How can I get rid of this?

Thanks for any help.

View 1 Replies View Related

Cannot Install Client Components On X64 System

Jan 8, 2008

I'm building a new server and am having a problem witht he SQL install. It's a Dell 2905 running Windows 2003 SP1 x64 and SQL 2005 x64. I'm able to install everything except for the Client Components, and even upgrade to SQL SP2.

I keep getting the following error:

"There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information"
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=50000&EvtType=packageengine%5cinstallpackageaction.cpp%40InstallToolsAction.10%40sqls%3a%3aInstallPackageAction%3a%3aperform%400x643
------------------------------
BUTTONS:
OK
------------------------------

The problem is that I can't find any solutions to this so far. Anyone recognize or have any insight into this?

View 4 Replies View Related

SQL Express Won't Install Because Of Beta Components Left Over

Aug 14, 2006

I successfully installed VS 2005 Team System - except for SQL Express - the error message being that components of the beta sql server were detected. However there is nothing that I can see in Add/Remove programs that indicates any previous versions of SQL Server 2005.

Any help would be greatly appreciated

Thanks

David Laub

View 1 Replies View Related

Standard Edition Components Wont Install.

Oct 4, 2007



I am getting the following error while attempting to install the Workstation components on my SQL2005 Standard Server.

To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.

I know the problem is related to a previous installation of Enterprise Edition on the same server. I have tried deleting all SQL files, and registry keys yet I am still getting the same error.

Any suggestions would be greatly appreciated.

David

View 2 Replies View Related

Unable To Access Install Windows Components

Feb 26, 2007

I didnīt know where to put this so sorry if this is not the appropriate place.

I am running Windows XP pro sp2 with visual studio 2005, ms sql server 2005, and a number of other applications.

My problem is that I am not allowed to install new windows components(I want to install IIS). When I try to access from either control panel, add/remove programs, Install new windows components or directly from the winXP cd I get the following error in a pop-up form and I can only press "OK":

"Another copy of Setup is already running. Complete the other Setup or restart Windows."


I am not running the instance more than once. I do this as the first thing after a restart with the same result. When looking at the processes in the task manager I cant see anything unusual.

It is a pretty slow computer so that may have something to do with it - some timeout or similar.

It is getting pretty frustrating so any suggestions are more than welcomed! thanks.

EDIT: I used process explorer to locate some stalled windows update process which I killed. Then msmqocm.inf was missing, but that seems to be a FAQ.

View 3 Replies View Related

BIDS Gives Me 'cannot Find One Or More Components' Error After Install

Sep 17, 2007



I have a Windows XP PC that we are trying to install SQL Tools on. When I install I get an error message that says 'cannot find one or more components'. When I finish the install, everything works except Buisiness Intelligence Development Studio, which is the product we will use the most. We do not have Visual Studio.Net or any of those product on this PC.

We have tried uninstalling and reintalling. We have tried both the Enterprise and Development CDs to get the tools installed. Both give us this error.

Any ideas?

View 3 Replies View Related

SQLServer 2005 Service Pack 2 Client Components Is Failing To Install

May 25, 2007

I have Windows XP Professional Version 2002 Service Pack2.

I Have:

Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600





Service Pack is failing to Install CLIENT COMPONENTS; message is:



Product : Client Components
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 29549
Error Description : MSP Error: 29549 Failed to install and configure assemblies c:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.



This situation, I am guessing, also preventing me to run import/export from the SQLServer Client.



Any help is appreciated. Thanks.

View 6 Replies View Related

Unable To Install Native Client Components In SQL Server 2005 Enterprise Evaluation Version

Dec 14, 2007

Hi all,

I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en

Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link

http://channel9.msdn.com/ShowPost.aspx?PostID=142941


First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.

Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.

View 4 Replies View Related

Developing Custom Components By Extending The SSIS Stock Data Flow Components

Sep 7, 2006

Everything I've read says that custom data flow components are built by inheriting from the Microsoft.SqlServer.Dts.Pipeline.PipelineComponent class.

But the stock components such as the Derived Column data flow transformation must each be implemented by their own class. So how do I base my custom components on those classes? The documentation for the PipelineComponent class doesn't list any such subclasses.

View 1 Replies View Related

Using Composition To Create New Specialised Components From Multiple Sub-components?

Jun 30, 2006

Hi,

In another thread Jamie Thomson very informatively said "The components in SSIS
are deliberately atomic (i.e. they do something very specific) so that
its easy to put them together to build something greater than the sum
of the parts". Which does make a lot of sense. However, I've been finding that I end up having to create exactly the same "pattern" of combined transform components again and again in order to solve the same problem but in different dataflows (or even within the same dataflow). Cut-and-paste-tastic! In order to obtain real re-use, it seems to me like SSIS is crying out for an easy way to create new components by using composition - i.e. the ability to take commonly-used combinations of existing components and create new "super" components (without having to write Custom Transform Components in C#/VB.Net and handle everything in code).

Does anyone know if this sort of functionality is likely to make it into SSIS in the forseeable future?

Regards,

Lawrie

View 6 Replies View Related

Sql Server Un Install Components Including Sql Server Express

Nov 7, 2007

would like to deinstall sql components and sql express. which components can be deinstalled when just using sql server. cannot find sql server express from the add remove programs.

View 7 Replies View Related

SQL Server 6.5 On MS NT4.0 Workstation

Dec 14, 1999

I recently installed VB6.0 Enterprise on my system. As a part of the installation is the option to install SQL Server 6.5 Development. I elected to install SQL. The install went without any glitches. Upon going into SQL Enterprise Manager, I was asked to register the server where SQL was running.
My understanding was that SQL would allow me to register the name of my host system. (This is a stand alone system with VB6.0 and Sql development 6.5 installed - no network attached). SQL will not allow me to register my server's name as the host server. It says that if cannot connect to the named server. SQLSERVER and SQL EXEC services appear to be running without any problems. Anyone have any idea where I should start or what could be disallowing my connection/registeration of my server. Any help would be greatly appreciated..... Thanks... Tom

View 1 Replies View Related

SQL Server On Win XP Workstation

Jan 7, 2004

Developers wanting to access sql server developer edition on XP workstation in small office network (workgroup) will have problems using windows authentication (trusted connection) if the XP "server" machine has "simple file sharing" enabled.

Simple file sharing in XP can be disabled in control panel - folder options.

For this sneak mode to work accounts with the same user and password should exist on both "client" and "server".

At least it worked for me!

View 1 Replies View Related

Workstation Date

Jan 31, 2006

Hi all!Is there any function in SQL that I can use to get current date fromworkstation? All functions which I tried (now(), getdate() etc.)returns current date from server but I need date from workstation.Regards,Mirnes Lemes

View 3 Replies View Related

Remote Admin Using MMC On NT Workstation

May 30, 2000

Hello,

I would like to know if one can adminiter SQL server remotely using MMC on NT workstation? If so, how do you install the MMC and SQL Enterprise Manager Add-in on NT workstation?

Thanks for the help

Kevin

View 1 Replies View Related

Problem Configuring Workstation

Apr 14, 1999

How can I configure my workstation running WIN95 to used the SQL Enterprise Manager from the server end and other utilities. I have installed the client network utility.

Reason to use enterprise manager because I wanted to perform administrative tasks on my workstation and I've installed SQL SERVER 7.0(Standard version with 5 clients)on the WINNT 4.0 server.


Can anyone helps?

View 1 Replies View Related

SQL 2000 Standard Ed. On W2k Workstation?

Jul 4, 2001

Hi there,

I need to use transaction replication between 2 DB Servers. One is running
W2k Server, the other is a W2k Workstation.

Can I install the SQL 2000 Standard edition on the Workstation in order to
implement Transaction replication?

are there other posibilities/suggestions?

Any help highly welcome!
Volker

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved