I've officially done everything. I've uninstalled everything I can think of. I've cleaned the registry until it sparkles. I've removed all directories having anything to do with VS or SQL. I've even run the uninstall tool multiple times and been told everything is OK. However, SQL Server Express STILL tells me there are "beta versions" of stuff on my machine. Do you have any suggestions, or should I just give up in disgust?!?!?!
View 3 RepliesMorning Folks,
I'm setting up SQL Server 7.0 as follows:
12 Gb initial data load;
heavy transaction OLTP;
4 processors;
RAID5
disk space NOT an issue.
I'm trying to figure out what a reasonable initial size for both the Transaction Log and
Tempdb should be. I was thinking 100Mb for each. Is this reasonable, or could either afford
to have more?
Is there a percentage of the .mdf that is recognized as a general rule of thumb for setting up
the Transaction Log and/or Tempdb?
Also, is there any value in assigning Filegroups in a RAID5 setup?
Thanks,
Sergio
I have a query that searches through a 4 million record table. The data is fed from the UNIX flat file systems so the data is not in optimal search format. So I created some views that massaged the data and then index them. I select and join the original table with the view, with NOEXPAND hint on the view. My question is this theory right: If I put the criteria in the FROM join part then it will make the join easier than if I put it in the where clause?
Example (any difference)
SELECT stuff1, stuff2 FROM UglyData u INNER JOIN MassageTable m ON m.RecNumber LIKE '112%' AND u.ID = m.ID
versus
SELECT stuff1, stuff2 FROM UglyData u INNER JOIN MassageTable m ON u.ID = m.ID WHERE m.RecNumber LIKE '112%'
THANKS!!!
Does the order of columns make a difference in the GROUP BY?Woulde GROUP BY A, B, Creturn different results thanGROUP BY C,A,B ?
View 3 Replies View RelatedDoes column order really matter for Query Optimizer to pick index.Case 1: Say my CUSTOMER table has one composite index containing FirstName and LastName. FirstName exists prior than LastName. Does the column, FirstName and LastName, order matter to have Query Optimizer to utilize the index when I write WHERE clause in a SELECT statement?Statement 1:SELECT * FROM CUSTOMER WHERE FirstName = 'John' and LastName ='Smith'Statement 2:SELECT * FROM CUSTOMER WHERE LastName ='Smith' and FirstName = 'John' Will both statement 1 and 2 use the composite index or only statement 1?Case 2:Say my CUSTOMER has two single-column indexes. One index is on column FirstName. Another is on column LastName.For statement 1 and 2 above, which index will be picked by Query Optimizer or both? How does QO pick for index?I read couple book and some books say column order matter but some say no. Which one should I go with? I'm kind of confused.
View 2 Replies View RelatedHi,
I have a question i need to ask. Since i'm new to SQL Server, i did a bit of experiment with SQL Server 2005 Express. I made up a simple Access Database file and migrated it to SQL Server. it was success which is good. Now i have a real Access Database file which i built for my client. Since he uses the SQL Server 2000 service pack 4, i was wondering if the version would matter a lot.
Thank you in advance
There are two fieldsA1 nvarchar(30)A2 nvarchar(800)I know nvarchar field is alterable length, if I store a string mystring='abc' to A1 field or to A2 field, I think they use the same disk space, so I think it's always a good way to define a big length nvarchar field such as A3 nvarchar(4000) for any length string, becuase they always use the same disk space, is it right?
View 1 Replies View RelatedI have two tables that I am trying to join and both have similar columns with which I am trying to use. One is Date and the other is LOGdate. Date's format is "01/01/2000" BUT LOGdate's is "01/01/2000 12:41:00 PM/AM". Can I join these two tables?
Any help would be greatly appreciated.
Thank you
Does column order matter when creating a table? For example, Should NOT NULL columns always come before NULL columns? Should most frequently used columns always be near the top? What about text, ntext and image data types? Should they always appear near the end of the column order?
View 1 Replies View RelatedI have two tables that I am trying to join and both have similar columns with which I am trying to use. One is Date and the other is LOGdate. Date's format is "01/01/2000" BUT LOGdate's is "01/01/2000 12:41:00 PM/AM". Can I join these two tables? If yes how do I get rid of the excess time on LOGdate.
Any help would be greatly appreciated.
Thank you
I have this data below :
isin | market | ccy| stock_mkt | max(a.year) | max(a.month ) | max(a. day)
DEX | XFFA | DEM | 013 | 2009 | 5 | 8
DEX | XFFA | EUR | 013 | 2014 | 11 | 25
get this data by running the following query :
select b.isin, a.market, a.ccy, a.stock_mkt, max(a.year)
,max(a.month), max(a.day) from market_table a inner join
isin_table b on a.id = b.id where a.isin_closing_date=0
and a.market in ('XFFA', 'XFFA') and
b.isin_type= 'I' and b.isin = 'DEX' group by b.isin,
a.market, a.ccy, a.stock_mkt
what's needed is to get the earliest record all times, no mater the currency :
isin | market | ccy| stock_mkt | max(a.year) | max(a.month ) | max(a. day)
DEX | XFFA | EUR | 013 | 2014 | 11 | 25
I would like to create a database that keeps track of our companies subject matter experts. I have roughed out some of the tables. I would appreciate any feedback on if this is the right approach and if there might be any issues when I start writting a front-end (probably VB 2005).
What makes this interesting (at least for me) is that a subject has an owner and at least 1 "expert", possibly up to 3. Here is what I am thinking for tables:
tblEmployee
EmployeeID (PK)
LastName
FirstName
etc......
tblSubject
SubjectID (PK)
Description
tblOwner
SubjectID (FK)
EmployeeID (FK)
tblExpert1
SubjectID (FK)
EmployeeID (FK)
tblExpert2
SubjectID (FK)
EmployeeID (FK)
tblExpert3
SubjectID (FK)
EmployeeID (FK)
Does this make sense? Would I run into any issues when trying to display this on a form in VB?
Thanks in advance for any help!!!!!
Cal
If I join Table1 to Table2 with a WHERE condition, isit the same if I would join Table2 to Table1 consideringthat the size of the tables are different.Let's assume Table2 is much bigger than Table1.I've never used MERGE, HASH JOINs etc, do any ofthese help in this scenario?Thank you
View 3 Replies View RelatedHi, all experts here,
Thanks a lot for your kind attention.
As I am creating the non-clustered indexes for the tables, I dont quite understand how dose it really matter to put the columns in the index key columns or put them into the included columns of the index?
I am really confused about that and I am looking forward to hearing from you and thank you very much again for your advices and help.
With best regards,
Yours sincerely,
Sometimes we have some pretty serious CPU spikes and I would like to be able to pinpoint the exact issue. I have been able through the DMVs to associate a session with an operating system thread. That's great if I have a batch that's causing the problem with a non NULL sql_handle. However, how do I further narrow down what is going on with the background service broker tasks using the DMVs? Or am I just at the blind mercy of SQL Server at this point? What can I query to know what the heck is going on?
View 10 Replies View RelatedI am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).
I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.
Here is the Summary log, for what it's worth:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Feb 06 16:45:14 2007
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : SQLXML4
Error : Setup is preparing to continue with the installation.
--------------------------------------------------------------------------------
Here is the SQLSetup0011_ANTHONYY1_Core(Local).log
Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007
Process ID : 2560
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/1/6 16:45:14
Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true
Running: ValidateWinNTAction at: 2007/1/6 16:45:14
Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true
Running: ValidateMinOSAction at: 2007/1/6 16:45:14
Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true
Running: PerformSCCAction at: 2007/1/6 16:45:14
Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true
Running: ActivateLoggingAction at: 2007/1/6 16:45:14
Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true
Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14
Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14
Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true
Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [ANTHONYY1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0)
Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0)
Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0)
Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b)
Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0)
Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0)
Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: ANTHONYY1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
<Func Name='DisplaySCCWizard'>
CSetupBootstrapWizard returned 1
<EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'>
Failed to find help file for LCID :2057
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true
Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35
Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true
Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36
Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true
Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47
Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true
Running: OpenPipeAction at: 2007/1/6 16:49:47
Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/1/6 16:49:47
Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47
Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true
Running: GenerateRequestsAction at: 2007/1/6 16:49:47
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = 3
SDK = 3
SQLXML = 3
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true
Running: CreateProgressWindowAction at: 2007/1/6 16:49:48
Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true
Running: ScheduleActionAction at: 2007/1/6 16:49:48
Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2007/1/6 16:49:48
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true
Running: InstallSqlAction.12 at: 2007/1/6 16:49:51
Installing: sqlncli on target: ANTHONYY1
Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true
Running: InstallSqlAction.18 at: 2007/1/6 16:49:55
Installing: owc11 on target: ANTHONYY1
Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true
Running: InstallSqlAction.21 at: 2007/1/6 16:49:56
Installing: sqlwriter on target: ANTHONYY1
Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true
Running: InstallSqlAction.22 at: 2007/1/6 16:49:58
Installing: bcRedist on target: ANTHONYY1
Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true
Running: InstallSqlAction.9 at: 2007/1/6 16:50:0
Installing: msxml6 on target: ANTHONYY1
Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true
Running: InstallToolsAction.11 at: 2007/1/6 16:50:2
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true
Running: InstallToolsAction.12 at: 2007/1/6 16:50:5
Installing: sqlncli on target: ANTHONYY1
Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2007/1/6 16:50:8
Installing: owc11 on target: ANTHONYY1
Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true
Running: InstallToolsAction.20 at: 2007/1/6 16:50:10
Installing: BOL on target: ANTHONYY1
Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true
Running: InstallToolsAction.22 at: 2007/1/6 16:52:2
Installing: bcRedist on target: ANTHONYY1
Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true
Running: InstallToolsAction.9 at: 2007/1/6 16:52:4
Installing: msxml6 on target: ANTHONYY1
Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallSqlAction at: 2007/1/6 16:52:7
Installing: sql on target: ANTHONYY1
Error: MsiOpenDatabase failed with 110
Failed to install package
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi
Setting package return code to: 1620
Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false
Error: Action "InstallSqlAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallToolsAction.10 at: 2007/1/6 16:52:27
Installing: sqlxml4 on target: ANTHONYY1
Error Code: 0x8007006e (110)
Windows Error Text: The system cannot open the device or file specified.
Source File Name: sqlchainingminorbuildactionbehavior.cpp
Compiler Timestamp: Mon Jun 13 14:30:04 2005
Function Name: sqls::MinorBuildActionBehavior::modifyRequest
Source Line Number: 65
---- Context -----------------------------------------------
sqls::InstallPackageAction::perform
Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false
Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Action "InstallToolsAction" will return false due to the following preconditions:
Condition "Action: InstallToolsAction.10 has finished and failed." returned true.
Installation of package: "tools" failed due to a precondition.
Step "InstallToolsAction" was not able to run.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2007/1/6 16:55:59
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1620
Error Code: 0x80070654 (1620)
Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
led due to cancel code received from cancel source: 29539
...and here is the SQLSetup0011_ANTHONYY1_SQL.log:
=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values
MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0
MSI (c) (00:54) [16:52:14:284]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex.
MSI (c) (00:54) [16:52:14:299]: Cloaking enabled.
MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex.
MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values
MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0
MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873
MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620
MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620
=== Verbose logging stopped: 06/02/2007 16:52:21 ===
I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(
The error I got is:
Hotfix.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
EventType : sqlsesetup P1 : sysdbupg.sql P2 : 0x7361
P3 : odbcstatement__execute_batch@sysdbupg.sql@3 P4 : 0x7361
P5 : lib_odbc_statement.h@91 P6 : unknown P7 : sql9 P8 : hotfix@
P9 : x86 P10 : 3042
Log Location: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission.. To continue, correct the problem, and then run SQL Server Setup again.
I tried to search internet, however, I couldn't get solution.
My SQL server 2005 is standard version, OS Windows server 2003 sp2, I am using Administrator account to install it.
Thanks a lot,
Rex
I have compile my application into a Smart Device CAB and also including SQLCE CAB file for SQL.
I have users who choose to install SQLCE into Storage Cards instead and causes the application not to function, when asked which destination to install.
I've done some search and found out about "wceload.exe /noaskdest" but I'm using NSIS to compile into a single .exe file, and its calling "CEAppMgr.exe"
How can I force SQLCE to install into its default directory without asking user?
Thanks!
Win XP Pro SP2IIS 5.1SQL 2005 SP1 (Developer edition)VS 2005 SP1.Net 2.0IE7 (didn't work on IE 6 either)Latest updates from Windows updateI have set up SSRS successfully on several machines. But on a new machine with standard install I have the out of the box SSRS report manager running with issues and would like to resolve them. Report Manager will serve image files from my project. But it won't render deployed reports, not even one which has no data sources. From within VS 2005 the same reports render, no problems. The same reports published to another SSRS machine render fine.The browser erorr message is "Value does no fall within the expected range".Any ideas? Thanks in advance.
View 3 Replies View RelatedHi,Is it possible to install Enterprise Manager without to install theserver ?Thanks !--J-L M. (Alphomega)ICQ: 149635116Pour m'écrire, cliquer le lien ci-dessoushttp://cerbermail.com/?G5iYdBb2Ce
View 3 Replies View RelatedHi,
I've tried looking for a solution in other threads but I couldn't find anything that was completely the same as my situation. I got a new pc at work and I've tried installing SQL Server 2005 on it but everytime I try to install it, regardless of services included or excluded with the install, I cannot get through the install without this error. Below is the excerpt from the Summary.txt log file.
Error Code: -2147024894
MSI (s) (74!98) [17:10:55:858]: Product: Microsoft SQL Server 2005 Tools -- Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlAssemblyRegSvcs
PerfTime Start: Do_sqlAssemblyRegSvcs : Mon Nov 12 17:10:55 2007
<Func Name='Do_sqlAssemblyRegSvcs'>
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog.
Error: 2147942402
Error message: The system cannot find the file specified.
Error descrition: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error Code: -2147024894
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlcasqlassembly.cpp
Compiler Timestamp: Thu Aug 11 01:12:01 2005
Function Name: Do_sqlAssemblyRegSvcs
Source Line Number: 155
I've searched for and found similar problems that deal with the microsoft.sqlserver.notificationservices.dll not being found but I haven't found a fix that worked for me. These are the fixes I've refered to thus far.
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1651162&SiteID=17
http://support.microsoft.com/kb/940971
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29549&EvtType=sqlcasqlassembly.cpp@Do_sqlAssemblyRegSvcs@Do_sqlAssemblyRegSvcs@x80131501
The answer that seems to fix this problem for everyone is to set the MSDTC service login as the NT AUTHORITYNetworkService account. The problem for me is that this is already set to this profile and I've tried resetting the services and rebooting the machine. I did not have a problem with my old machine, which as far as I can tell, is the same configuration, so I know this install should work.
I'm running Windows XP SP2. This is not the upgrade to SQL Server 2005 SP2, this is the original disk that came with Visual Studio 2005.
Has anyone else faced this issue where changing the MSDTC login wasn't the solution? Also, this is my first post, so I apologize if I've left anything out. Just let me know if you want any other information.
Thank you in advance.
Tim
I never installed previous beta versions on my computer before. But now I have some serious problem after an incomplete de-install and a re-install of SQL server 2005 express advanced. I hope anybody can help me to solve this. Because the first installation eas not succesfull I had to do an de-install. I have tried to unstall through start/control panel/ add-remove programms and even there not all programs were removed. And that caused the problem. After that I wanted to re-install again but an msi file was missing. So I did a de-install agian. Tried to re-install again but with a lot of errors. After looking at the library I found a program: Windows Install CleanUp. I installed it and that even gives an error for all programs installed with SQL 2005.
After that I ran a program called MsiInv to clean but without any succes because this program reported a run-tim error. I have all reports on my computer but don't know how to attach them. If you think you can help me I could send you all the reports.
Regards,
Jan J
I have never installed sql server before and I didnt know if I just take the sql server 2005 standard edition media and boot off it and do a fresh install that way or do I have to install Windows server
View 3 Replies View RelatedI went to one of the Microsoft "Ready To Launch" events over a year ago. Microsoft was gracious and gave everyone who attended a free copy of Visual Studio 2005 and SQL Server 2005. I have installed the Visual Studio and use it all of the time. I also installed the SQL server 2005 but I can not find the application on my computer. After the install the only items that appear to have been installed are the following:
SQL Server Configuration tools(SQL Server Configuration manager,SQL Server Error and usage reporting, SQL Server surface area confiuration, Reporting Services configuration). There is also a menu icon labeled "Microsoft SQL server upgrade advisor" and SQL server upgraded wizard.
That is all. I can't find anything that is analogus to the Enterprise manager that was in SQL server 2000 or anything that is analogous to Query Analyzer of 2005.
Can someone help me out? We use SQL server 2005 so I know how it looks. I just can't see where it insalled. I don't think it did?
Hi, I need to have on a client machine the bcp.exe installed. What components do I need to install from SQL Server 2005. I would like to have the absolute minimal installed on this machine. Thanks.
View 1 Replies View Related
hi all,
can i install the both SQLServer 2000 and 2005 in same server?
Thanks!
i have downloaded MSDE sql ad I have extract it...
but now I can't install it with the command prompt
Is windows xp home edition a problem?
I need to re-install SQL 7 sp3 on NT4. I have read that I should detach the user databases of which I have 3, uninstall SQL then install SQL, then reattach. But what about all the jobs and packages and security I have setup? It is my understanding that this is stored in the master db. Won't that all be lost? If so I guess jobs could be scripted, packages could be saved, but what about the security?
-Thanks in advance.
I installed 6.5 into a server that aleardy has 7.0. Toward the end, it said 'Setup could not connect to the SQL Server'. Now as I try to start MSSQLSERVER I got an internal NT error.
I am stuck. Should I remove 7.0, install 6.5, then 7.0
PN.
I have a new box that I have install SQL7 on and I also need SQL 6.5 on there to get back to SQL 6.5 databases on another server. The only way I know how to do this is uninstall SQL7 and then SP4 and then start with SQL 6.5, SP4, and SQL 7. Has anyone found another way?
Thanks
Ricky Kelley
Hi All,
I am on a client site, and they are trying to install SQL Server 7 (standard) on an NT 4 server (SP5), and hitting a problem that prevents the installation completing. The error log generated includes `Attempting to initialise Distributed Transaction Coordinator.....Failed to obtain Transaction Dispenser Interfaces`. If anyone has ideas on what the problem is, I would appreciate a response.
Thanks,
Herve
I have 486 processor and Win 98 OS. SQL Svr 7 Beta doesn`t like 486.. I don`t have NT on my machine is it possible to run SQL 6.5 on Win9x?
Thank You.
Hi,
I want to deploy the sp3 on sql2000 msde on a lot of laptop, do you know a way to install the sp3 without any actionv of the user.
a silent install.