Cannot Make Server As Target Server Or Link From Master Server
Jul 20, 2005
Sql Server 7 Standard Edition
My Server was renamed and the normal steps of reinstalling
and running sp_dropserver and sp_addserver were followed.
Everything seems to work fine but jobs from the master server.
I did defect the server as a target server since it appeared as offline
anyway.
On trying to re establish the status of the server as a target server
Failed to make "serverName" a target server
Enlist into Master Server "MasterServerName" Failed(Error 14262)
Your insight is appreciated
Vincento
View 3 Replies
ADVERTISEMENT
Sep 9, 2015
I'm looking for a way to list the target servers associated with a master server. The reason is that we're moving to another master server, and I'd prefer not to move the targets manually.
I've got most of the T-SQL already (sp_msx_enlist, sp_add_jobserver), but I'd like a scripted solution instead of a wizard.
View 2 Replies
View Related
Apr 22, 2008
Silly question, but why can you not setup a multi-server job and have that same server as a target? What's the rational behind this?
View 3 Replies
View Related
Feb 22, 2006
I've installed SQL Server 2000 and applied SP3a. I see SP4 is available and fixes a lot of things. The only bit I am unsure about is section '5.3.2 Changes to Master/Target Server Configurations'
http://download.microsoft.com/download/1/b/d/1bdf5b78-584e-4de0-b36f-c44e06b0d2a3/ReadmeSql2k32sp4.htm#_5464_sql_server_agent_enhancements_705
"Before you apply SP4, you must complete several steps to upgrade your SQL Server 2000 master/target server configuration. The changes that are introduced with SP4 are not compatible with SQL Server 7.0 target servers, or with any servers not running SP3 or later. This is a change from the original SQL Server 2000 functionality. "
As I'm just starting out I don't even know what 'Master/Target Server' is. I'm only installing to my PC which is XP Pro SP2. Can I ignore this step and apply the patch or do I need to do as it states?
Thanks
View 1 Replies
View Related
Oct 17, 2007
Error 7302: Could not create an instance of OLE DB provider 'SQLOLEDB'. OLE DB error trace [Non-interface error: CoCreate of DSO for SQLOLEDB returned x8007007f].
CASE:
I created a link server from SQL Server 2000 to FoxPro database using vfpoledb driver. SQL server and FoxPro database are NOT being run on the same machine.
Server1 - SQL Server 2000 (I created the link server which connects to Server2)
Server2 - FoxPro database
TROUBLESHOOT
When I test the link server on the machine which has FoxPro database , It is working with no problem.
PROBLEM STATEMENT:
When a user machine sends a query to Server1/Link Server, it is getting Error:7302
Please help me.
View 2 Replies
View Related
Oct 6, 2005
Greetings,
I want to connet to Oracle databse from SQL server 2000 since I am more comfortable with SQL 2000 client package. The oracle server is 8i or above.
I am running a SQL Server 2000 on a PC with Windows XP OS.
Please help what I need to do and configuration information.
Thank you all in advance.
BPG
View 1 Replies
View Related
Jul 30, 2006
please tell me the best way?
thanks
:-)
View 2 Replies
View Related
Oct 17, 2007
I'm getting the following error when launching the database mirroring monitor and attempt to connect to my database.
TITLE: Connect to Server
------------------------------
Cannot connect to dborat01.hs.pitt.edu.
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'xxxxxx'. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
View 3 Replies
View Related
Feb 14, 2008
set up windows 2003 serversql server 2000have public IP from netword soluctionsI can see websitewhat settings to i need to open up sql server to the public?
View 1 Replies
View Related
Mar 9, 2007
Hello!
What is the best way to make a copy of an existing sql server database to another (physical) server?
Plan to make a full backup of another sql server database to another server. I've read about detach and attach
and copying the datafiles and log files but some say it is prone to data loss? Is this true?
And another thing, what if the existing sql server can't affor downtime for me to copy db files etc.?
Anybody here who have done the same?
Any help is very much appreciated.
Thanks!
View 3 Replies
View Related
May 18, 2007
I have several target servers defined, i have a job that needs to run in a serial fashion (ie.. 1 target at at time) if every target kicks off the job at the same time it's going to bog down the disk drives... can this be serialized? or do i need to write a special routine...
View 3 Replies
View Related
Apr 10, 2006
I created a linked server (PLNK Oracle 9i), and run the query:
Insert into MSTBL1
select * from openquery(PLNK,'select * from v_ora_view1);
The above query run success when I issue the query in Query Analyzer.
But it got access denide after I copy it to a job.
Any idea?
View 2 Replies
View Related
Jun 7, 2007
The OLEDB linked server was working under SQL Server 2005 SP1. After installing SP2 the following error occurs:
OLE DB provider 'EDAOLEDB.1' cannot be used for distributed queries because the provider is configured to run in single-threaded apartment mode. (Microsoft SQL Server, Error: 7308)
Does anyone know how to fix this?
View 1 Replies
View Related
Oct 23, 2007
I am Using Sql Server 2005 and XP OS Can i use sql server as a server by xp, if yes how? pls help
thanks in advance
View 3 Replies
View Related
Aug 2, 2006
Hi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
View 1 Replies
View Related
Jul 13, 2015
I need to investigate about what happened to our production server at the last weekend.i restored it to another server which is development. I restored it under a name "old_master_2015_07_10".
But if I run a query
SELECT *
FROM [old_master_2015_07_10].[sys].[servers]
it actually selects from master.sys.servers, not from my old_master... In order to prove it, I created a linked server in this, development server, and if I run SELECT * FROM [old_master_2015_07_10].[sys].[servers], it selects it. And in database selection drop-down box I also selected old_ master_ 2015_07_10. What I think it apparently recognizes familiar names like sys.servers and redirects the query to the master.
What I can do to select really from old_master_2015_07_10 database? I already thought about renaming sys.servers to something different, but did not do it not to break something in master in case if SQL Server will run it in master as well.
View 9 Replies
View Related
Jul 23, 2005
Hi,We are planning to create a prod environment on our Dev server, bycreating a new named instance on DEV. Our prod server is running onsql enterprise edition 64bit and dev on SQl enterprise 32bit.Could we copy all the databases from prod server includingMaster,msdb,model onto our dev server, and bring up all the databases?Does Master store information about the version of SQl server?Thanks for your helpGG
View 1 Replies
View Related
Apr 27, 2008
I have never done this in a DR scenario before. What I used to do in SQL Server 2000 was apply the logins to a new installation of SQL 2000 then recover the application databases. I'm using 2005 now and I'm in a different mode where I would like to be able to recover the system (master, model, msdb) to a different server with the same SQL Server 2005 build ---- 9.0.3054. I'm following the procedures from Microsoft where they state to place the instance in single user mode first then invoke SQLCMD then perform the restore. Sounds simple enough.
C:> SQLCMD
> RESTORE DATABASE MASTER from DISK = 'Z:MINIDRmaster_backup_200804200315.bak'
The console is coming back with a message that the backup set holds a backup other than the existing master database. So I suppose that this cannot be done and is only intended for recovery on the same instance.
Any input/experience is appreciated.
Thanks.
View 6 Replies
View Related
Mar 11, 2008
I need information on steps to upgrade my current Master(MSX) server to a new server.
My MSX is a SQL 2K and it keep track of jobs in about 70 servers, some 2K and some 2K5.
Any ideas will help
Thanks
Jesus
View 3 Replies
View Related
Oct 18, 2007
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
View 5 Replies
View Related
Feb 19, 2008
Hi,
I have a problem using service broker, a send the message from server SSB1(initiator) and a receive this message on server SSB2(target), but I don't receive response to SSB1...
In my server SSB2 has this messages on Profiler:
- This message could not be delivered because it is a duplicate.
- Could not forward the message because forwarding is disabled in this SQL Server instance.
- The message could not be delivered because it could not be classified. Enable broker message classification trace to see the reason for the failure.
Message from SSB1 Profiler:
- This message was dropped because it could not be dispatched on time. State: 1
And the messages not end in both servers
Tks
Fernando Bueno
View 8 Replies
View Related
Mar 12, 2015
I'm not even sure this is possible but I'm using MERGE in a process that has 3 source tables (the process steps through each source table sequentially) and I need to delete from the Target database occasionally.
My current code is
sqlMerge = "MERGE " + TableName + " AS target USING @CData AS source" +
" ON target.TotRsp = source.TotRsp AND target.ClientRef = source.ClientRef AND target.dbPatID = source.dbPatID" +
" WHEN MATCHED THEN" +
" UPDATE SET dbPatFirstName = source.dbPatFirstName, dbPatLastName = source.dbPatLastName,
[Code] ....
The Target db data is made up from several different clients and when the MERGE runs it uses TotRsp, ClientRef and dbPatID to uniquely match a source row to the target row and if no match it inserts the source row.
My problem is that when this runs with Source A first, it will delete all merged data from Source B & C. Then when Source B runs it will insert all Source B data but delete all from A & C and so on.
Is there way that that I can include additional clauses into NOT MATCHED BY SOURCE THEN so it knows only to delete when data has come from say Source A. Once the data is in the target table there is no reference to which source table it came from tho.
If there isn't a solution I suppose I could always add an extra column to the target db to indicate which source it came from and then have something like
NOT MATCHED BY SOURCE AND t.Source = 'SourceA'.
That's quite a bit of work my end to do that tho so I'd like to be sure it works.
View 1 Replies
View Related
Jul 16, 2015
I was able to build and Preview the report, but ran into an issue when trying to deploy the report that I created. After reviewing various postings on this issue, I still can't seem to get past the issue.
Currently running SQL 2014 Developer Edition, SQL Server Data Tools for VS 2013, and O/S Windows 8.1 all on the laptop. I followed the video and left the default value of LocalHostReportServer. System said LocalhostReport Server could not be found.
I went to SQL Configuration Manager and tried using the Logon as the URL. Still received the same error.
I went to Reporting Services Configuration Manager and used the URL, still received the same error.
View 10 Replies
View Related
May 7, 2008
***SSRS 2000 ISSUE***
Hi All
Recently, several of our users have started to experience issues with hyperlinks in a report. I have created a textbox added navigation and selected the report to 'jump to' and the users are getting this error:
The specified server url does not link to the report server for this report manager or is not in the correct format
I have changed this to a an url but the error persists - there is nothing on google or MSDN that i can find which relates to this error so im kinda stuck with this one! The error is not affecting all users, just a small subset of them. Each of the users has different AD rights with one of them being a Domain Admin so i dont think it is a security issue.
the hyperlink which is being built is this :
http://<SERVERNAME>/SQLReports/Pages/Report.aspx?ServerUrl=http%3a%2f%2f<SERVERNAME>%2fReportServer%3f%252f<SERVERNAME>%252fS<REPORTNAME>
*obviously the <SERVERNAME> and <REPORTNAME> are not real server or report names - im just being cautious by not including this detail on a forum post.
Report manager is installed on several machines as part of a webfarm but this has not caused any problems in the past (i have over 200 reports under my belt thus far)
....Anyone have any ideas?
View 8 Replies
View Related
Apr 25, 2015
Regarding Snapshot replication....
If I have 200 tables on my source DB and 100 tables on my target DB... and I set up a publication w/ just 1 article to be published....
Will the invocation of the snapshot/apply affect any tables on my target other than the article I'm replicating?
View 2 Replies
View Related
Feb 12, 2008
Hi, I am less of a technical but more of a analyst professional and right now investgating on various tools / options for the new conversion project I will be leading in insurance client. One of the tools that client want to use is SSIS but the source and target database is not on SQL server but plans are to build a staging SQL server database for transformation. Does SSID supports this kind of ETL process where both source and target system are non SQL servers.
Thanks,
H Gill
View 4 Replies
View Related
Feb 10, 2015
I have a table:
declare tableName table
(
uniqueid int identity(1,1),
id int,
starttime datetime2(0),
endtime datetime2(0),
parameter int
)
A stored procedure has new set of values for a given id. Sometimes the startime and endtime are the same, in which case I update the value of parameter. Sometimes I add a new time range (insert statement), and sometimes I delete a time range (delete statement).
I had a question on merge, with insert, delete and update and I got that resolved. However I have a different question regarding performance of the merge statement.
If my target table has hundreds of millions of records and I want to delete/update/insert a handful of records, will SQL server scan the entire target table? I can't have:
merge ( select * from tableName where id = 10 ) as target
using ...
and I can't have:
merge tableName as target
using [my query] as source on
source.id = target.id and
source.starttime = target.startime and
source.endtime = target.endtime
where target.id = 10
...
This means I cannot filter the set of rows in the target table to a handful of records where id = 10.
View 1 Replies
View Related
Apr 24, 2015
I am created a SSIS package to export data. I am exporting query data to a flat file to a different server. I tried to use the UNC path and it failed saying could not access the file. How can I create a SSIS package to export data from one server to another?
View 5 Replies
View Related
Oct 6, 2015
I have documentation in the form of extended properties for tables which are subscribers in a replication scheme. The documentation describes the tables in reference to their replication scheme. I don't want to apply them to the source and have them published.I can't apply the extended properties receiving the error, 'don't have permission' yet I am DB creator on all systems. The theory is that I can't modify the subscription. Which makes sense.Can I turn off the replication, apply the extended properties, then turn on replication without causing harm?
View 0 Replies
View Related
Dec 5, 2007
I have a SQL Server 2005 box that was moved from a domain environment to a non-domain environment and was never dropped from its original domain before moving over. Subsequently a new domain was created at the data center this SQL Server box now resides in. The machine was dropped from its old domain and joined to the new one.
All the while the service accounts were set to the local admin account. When I tried to start the Configuration Manager I got the message "Connection to target machine could not be made in a timely fashion.". I read some blog entries and tried changing all the service accounts to Local System and the error message still came up.
All of the SQL Server services run fine. It is just this management console that I cannot open. I wasn't with this employer when this box was moved to the data center so I do not know if it worked prior and there isn't anyone here that could give me its history.
Any help would be appreciated.
View 4 Replies
View Related
May 4, 2000
Can any one tell me what I did wrong? Tried to set up link server from SQL 7.0 to Oracle.I did it as it was instruct in BOL. When I tried to click on the table, I got this message "error 7399: OLE DB provider "MSDAORA" reported error. Thanks.
View 1 Replies
View Related
Sep 18, 2001
I have created a linked server using an userid that have access to 2 different databases. The linked
was created successfully but I am only able to see tables in 1 database but not both.
The tables of the databases that I can access is the default database of that userid. Is there a way to see all the
tables from more than 1 database that the user is authorized to? Thanks.
View 2 Replies
View Related
Mar 4, 2008
I need help on creating Link Servers. The error message that I get says the link server is been created but it fails to connect.
View 2 Replies
View Related
