I was using Windows 7 and had SSRS 2014 installed.Having set up the inbound rule on Windows Firewall (port 80), to allow SSRS through, I was able to browse to the Report Manager URL, by opening up Internet Explorer as 'Administrator'..
However, now that I have upgraded to Windows 10, I am unable to open the URL.In fact there is now way for me to open Edge as administrator and open my Report Manager URL.
When I try to open the Powerview report in the new Windows 10 Explorer (MS Edge), I am asked to install Silverlight.
When I try to install this, it says I already have it installed so I can’t proceed in opening the Powerview report.
Just upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
View 4 Replies View Relatedhi
i have a SSRS report where matrix is embedded into table.
when i view the deployed report in IE, it works fine
But when i view the report in FIREFOX browser.. the report for toss..
the alignment of the report is completely screwed up :-(
My client badly requires Firefox support for all their reports
Any suggestion and help would be appreciated
Thanks
I am facing an issue when report with graph deployed to BI, I can see the misalignment issue in the browser however, when report is run in the Report Builder/SQL Server Data tool or export into PDF then there is no issue.
How to fix the misalignment issue of the graph in the browser. See the both graph below -
Graph Misalignment Issues Screengrab in Browser
Graph without misalignment issue in PDF or Report development tool
I am using the Internet Explorer browser.
Hi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
I was able to log in to SSRS report manager. But i was unable to run a report i designed on report builder.
It prompts for login when i wanted to run the report and i used the same windows authentication to sign in
It will show me the parameters but when i click on view report it gives this error
"Data source 'DataSource1': An error has occurred.
Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'DataSource1'. ---> System.Data.SqlClient.SqlException: Login failed for user 'Acc-11Admin'."
I am using SQL Server 2005 Developer Edition and have created several reports, deployed them to SQL Server and tested them.
Everything works correctly, but when I open the Report Manager using localhost/Reports, the page takes several minutes to connect and open. I am doing this on a new laptop I use for development and testing, so I can see where it would be a little slow, but a few minutes seems extreme. I don't have any problem with SQL Server itself, nor with VS 2005.
Are there any tips or setup issues which might affect the startup speed?
Many thanks
Mike Thomas
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies View RelatedI have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
Hi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
Hello, when I log onto Report Manager web server using Windows Authentication, I need this user to be directed to a default sub folder.
For example: if I have folder A and sub folder 1 and 2. I need to be able to log in and be directed to sub folder 1. I was able to set up view role and access folder A. But then I need to click on folder 1 to view / create my reports.
Hi all,
I was wondering whether I should just use the URL posting in aspx as below :-
Code Snippet
Response.Redirect("http://Reportserver/virtualfolder/Deployedfoldername/Reportname¶metername=parametervalue")
or Should i just put this in the asp page ?
Code Snippet
<asp:HyperLink ID="HL1" runat="server" Target="_blank" NavigateUrl=http://Reportserver/virtualfolder/Deployedfoldername/Reportname¶metername=parametervalue">Click on Report</asp:HyperLink></div>
I can't really test this out at the moment till i get a go ahead from the IT Department that SSRS is up and running and i can deploy the reports.
I was wondering what would the effects be for each code in their respective pages ?
Would the aspx be able to pop up the report page in a new window automatically ? OR the second piece of code is a better way of doing it ?
Sincerely,
Bernard
I want to open a pdf file in a new window by clicking on its URL in SSRS reoprt. I heard that it is possible with Java script. So I tried with ="javascript:void window.open('yoururl&rs:Command=Render"')" in the SSRS expression. It is working only for https and http.
But the URL which I want to open is as follows.
ourcompanyname.localsystemsdocumentsabcd.pdf
I am facing an Issue with my SSRS-Reports. I have a stacked column chart in my report and the columns are linked to another report, a sub-report with 6 parameters. Right now after clicking the columns, the sub-report get opened in the same IE-Tab, with relevant parameters and it works out correctly. Challenge is, to open the new report in a new tab / window.
My Current situation: A Chart report, with Action “go to report” on series properties with 6 parametersChallenge: open linked sub-report in a new tab.Info 1: new path of sub-report looks like this:
http://<my_report_server>?ItemPath=<subreportName>&ExecId=qwercc45xgfvll45e4ebgjna&PingId=314x1cy4etmnky45abszeb99
Already tried with no success: I know, action “go to URL” using Expression:
="javascript:void(window.open('http://……','_blank'))"
Info 2: the parameters are like these: CompanyName; Date_From; Date_To; Title; Division; ProfitCenter.
I don’t know If I should try to create this ExecId and PingId; If there is any way to pass the through the parameters or there is another way.
Hello all,
When I print the reports ( or export to PDF) in Report Manager, my every alternate page is blank? If the report is just one page report, I get second page as blank when I print or export. The report prints in Landscape format( which should be fine given 8.5 inch height and 11 inch width).
I have played with the interactive Height and other height parameters but with no luck.
My current settings in the rdl file is:
<BottomMargin>0.5in</BottomMargin>
<RightMargin>0.5in</RightMargin>
<PageWidth>11in</PageWidth>
...
<Width>11in</Width>
<InteractiveHeight>1.5in</InteractiveHeight>
<Language>en-US</Language>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
I would highly appreciate any suggestions.
Thanks
Phewa Taal
I want to be able to open URLs in a new window in my SSRS report, and the URLs keep changing in every record. The problem is these links are not the only things present in the record, and there is other data present. I keep seeing examples where they are considering only a link to be present in the record with no other data.
Also the data in the record includes HTML tags and I checked the option that says "HTML - Interpret HTML tags as styles" on the placeholder properties window.
Example of data in the record:
Hello! Welcome to google, the most used search engine.
Click on www.google.com to go the website
So when I click on the www.google.com URL, it should open in a new window.
I have SSRS Log files under
c:MSSQLMSRS11.MSSQLSERVERReporting ServicesLogFiles
I am getting frequently errors in report manager. When I open that log files, I can see some old logfiles in 2013. So now how to enable that logging feature again.
i.e. before that they enabled the logging in reportserver and disabled now?
This is a really strange problem. There are some reports that work fine when I click the print button provided by the Report Manager but trying to print the report by clicking on print button located by the export causes my computer to reboot. Is there a resolution?
The report can be successfully printed if exported to pdf.
Hi.
I wonder if it is possible to set forms authentication for report manager but leave report server "as it is". I need to authenticate users from external LDAP and can't use windows authentication for report manager, but I would also like to leave report server open for anonymous users. In that way authenticated administrators could create reports which anonymous users could read.
I tested the Security Extension Sample and got it working when I rewrote the authentication part with my own LDAP authentication.
If I have understood correctly, the report manager is just application inside report server so is it possible to use forms authentication with one application but still leave the report server with Windows authentication?
I have some hyperlinks on different rows of a table in the report. Currently when I click on these, they open the links on the same page. I want the link to open in a new instance of IE.
I tried using "javascript:void(window.open('http://www.google.com','_blank'))" as the URL, but this will virtually do nothing.
Can somebody help please?
Thanks,
Steven
My SSRS report never finishes running for some reason.
If I run the same SP with the same parameters from SSMS it runs in 0.5 sec (returns 8-10 rows).
When running from report manager, I see extremely high CPU Time and Disk IO values, no blocking, no waiting at all.
We receive the error below when attempting to access our newly installed reporting service under Windows Vista. We can't seem to fix to this error. While we can view reports deployed to my report server at http://ServerName/ReportServer, we cannot access the Report Manager that comes with SSRS via http://ServerName/Reports. When we do we get the error below.
According to the error it cannot find the 'C:WindowsassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll. The missing dll is located in our C:$WINDOWS.~QDATAWindowsMicrosoft.NETFrameworkv2.0.50727System.EnterpriseServices.dll. We do not have a GAC_32 directory in our Assembly directory and we cannot manually add any thing to the Assembly folder.
Does anyone have any idea how to resolve this error?
Any assistance is greatly appreciated.
Server Error in '/Reports' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0006: Metadata file 'C:WindowsassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll' could not be found
Source Error:
[No relevant source lines]
Source File: Line: 0
Show Detailed Compiler Output:
c:windowssystem32inetsrv> "C:WindowsMicrosoft.NETFrameworkv2.0.50727csc.exe" /t:library /utf8output /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl350805c34 0086ba6_164dc701ReportingServicesNativeClient.DLL" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl357073932 092ba95_164dc701Microsoft.ReportingServices.Diagnostics.DLL" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl34957153c 0086ba6_164dc701ReportingServicesFileShareDeliveryProvider.DLL" /R:"C:WindowsassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Runtime.Serialization3.0.0.0__b77a5c561934e089System.Runtime.Serialization.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Web.RegularExpressions2.0.0.0__b03f5f7f11d50a3aSystem.Web.RegularExpressions.dll" /R:"C:WindowsassemblyGAC_MSILSystem.IdentityModel3.0.0.0__b77a5c561934e089System.IdentityModel.dll" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl36a74e136 0086ba6_164dc701ReportingServicesEmailDeliveryProvider.DLL" /R:"C:WindowsassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll" /R:"C:WindowsassemblyGAC_MSILSystem.ServiceModel3.0.0.0__b77a5c561934e089System.ServiceModel.dll" /R:"C:WindowsassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl39a6712b7 092ba95_164dc701Microsoft.ReportingServices.Interfaces.DLL" /R:"C:WindowsassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl34c4caac7 0359ca7_164dc701ReportingServicesWebUserInterface.DLL" /R:"C:WindowsassemblyGAC_MSILSystem.DirectoryServices2.0.0.0__b03f5f7f11d50a3aSystem.DirectoryServices.dll" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7assemblydl326b107a1 0e258c3_b4d0c501ReportingServicesCDOInterop.DLL" /R:"C:WindowsassemblyGAC_MSILSystem.Web.Mobile2.0.0.0__b03f5f7f11d50a3aSystem.Web.Mobile.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll" /R:"C:WindowsassemblyGAC_MSILSystem.ServiceProcess2.0.0.0__b03f5f7f11d50a3aSystem.ServiceProcess.dll" /R:"C:WindowsassemblyGAC_MSILSystem.Design2.0.0.0__b03f5f7f11d50a3aSystem.Design.dll" /R:"C:WindowsMicrosoft.NETFrameworkv2.0.50727mscorlib.dll" /R:"C:WindowsassemblyGAC_MSILSystem.DirectoryServices.Protocols2.0.0.0__b03f5f7f11d50a3aSystem.DirectoryServices.Protocols.dll" /R:"C:WindowsassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll" /out:"C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7App_global.asax.vk_hxeqb.dll" /debug- /optimize+ /w:4 /nowarn:1659;1699 "C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7App_global.asax.vk_hxeqb.0.cs" "C:WindowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
eportsaa13b3275d348ea7App_global.asax.vk_hxeqb.1.cs"
Microsoft (R) Visual C# 2005 Compiler version 8.00.50727.312
for Microsoft (R) Windows (R) 2005 Framework version 2.0.50727
Copyright (C) Microsoft Corporation 2001-2005. All rights reserved.
error CS0006: Metadata file 'C:WindowsassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll' could not be found
Version Information: Microsoft .NET Framework Version:2.0.50727.312; ASP.NET Version:2.0.50727.833
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.
Hi
I have picked up the same problem that quite a few folks have identified.
I have created a SSRS Solution and have a report which I am trying to deploy to the Report Manager.
The project 'builds' locally but when I try to deploy it, a User Login Box pops up.
Has any one been able to ascertain what causes the problem and how does one go about resolving the problem.
I am using Window Authentication on WIndows XP SP2 with SQL Server 2005 Developers Edition and Visual Studio 2005 Professional
I have not 'tinkered' with IIS,.
Any help would be greatly appreciated.
regards Steve
SQL server 20005 SP2 is install in my WIN XP machine. I implement a SSRS report and try to deliver the report to a share folder in window 2000 server.
I create and set permissions on a shared folder as per the information in http://msdn2.microsoft.com/en-us/library/ms345228.aspx. The account that I use in subscription is local admin account in the target machine.
I have try path \<servername>c$XXX and \<servername>XXX. Both is not ok.
I find following error message in the log file of reporting service.
ReportingServicesService!library!d!04/29/2008-00:03:40:: e ERROR: Throwing Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid., A logon error occurred when attempting to access the file share. The user account or password is not valid.;
Info: Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid. ---> System.Runtime.InteropServices.COMException (0x8007052E): Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSRemoteRpcClient.RemoteLogon.GetRemoteImpToken(String pRPCEndpointName, Int32 type, Guid dataSourceId, String pUserName, String pDomain, String pPassword)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
--- End of inner exception stack trace ---
If I try to deliver same report to a share folder in WIN XP in the same way. It is ok.
I have a report in SSRS2012. It was copied from SSRS2005 quite recently, as we have upgraded. The SQL developer said that it didn't need any code changes, as he had some kind of tool to test code problems between the two versions. The report has a table, with 5 row groups, and one detail row. The table is setup as follows:
Name Sales Costs Profit
Group1
Group2
Group3
Group4
Group5
DetailsRow
When I run this report using the Report Manager website from SSRS2005, and then export to Excel 2013, I get the 6 row groups in Excel, no problem whatsoever. I can drill into each group in Excel, using the group drilldown column on the left hand side. This works the same as the Report Manager website.
If I run the exact same report from the Report Manager website in SSRS2012, the Report Manager result is the same as SSRS2005 - all the row groups are present, and the drilldown works fine. However, the export to Excel has issues with the groups. There are only 3 row groups showing in Excel, along with a column group added for no apparent reason.
Drilling into each group shows inconsistent details, and there is no apparent logic as to what is shown within each group. I should also mention, that this issue with groups is seen on all my reports which have groups, not just this report.
I have 3 SSRS 2014 (Dev, UAT and Prod). I would like to change background colors of each environment and customize the title 'SQL Server Reporting Services' to ' SSRS Development'.
I prefer to implement both, a background color change and a title change. The reason for this is to clarify to end users which environment they are working with.
Where can I make those minimal changes in SSRS 2014.
Is it true that the Report Manager is not designed to be run on non-IE browsers like Firefox etc?
I can't even view a proper report if it's launched by Firefox......:eek:
Long story short -
Have two C# applications - one WinForms desktop app, the other a WinForms smart device app. Both use SQL Server Compact CE 3.5 to store data locally. Both work just fine.
Now the desktop app needs to open and update the .SDF file that is stored on the Windows Mobile device. (Device will be docked via USB.)
What format would the path to the .SDF look like that the WinForms application would need to specify in order to open it?
Thanks for reading.
How can I get my report to render correctly in Firefox?
View 4 Replies View RelatedI have finally have reporting services up and running. A list of all built-in reports have been populated under Monitoring>Reports but when I click on them I get the results shown in the screen shot attached. Below is the error I get when I try to open any report from my IE browser. I have confirmed SSRS is running on my SQL server. I actually had to start it in order to get the list of reports to populate becasue it was stopped. An error has occurred during report processing. (rsProcessingAborted) Cannot impersonate user for data source 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. (rsErrorIm personatingUser) Log on failed. Ensure the user name and password are correct.
View 4 Replies View RelatedHi,
How to import analysis browser in SSRS. I need features similar to SSAS Cube browser and SSAS dimention browser.
Regards
Spandan