Cannot Start SQL Server Due To Certificate Issue

Sep 25, 2007

Hi all, I created a certificate in the master database so that my endpoint could use the certificate.

I dropped the endpoint and dropped the certificate and added a new one and created a new endpoint because the earlier one had a weak password.

Everything has been fine till we restarted the server. Master, model start up fine but now I am getting these errors.

Starting up database 'master'.
2007-09-25 10:40:53.62 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-09-25 10:40:53.77 spid5s CHECKDB for database 'master' finished without errors on 2007-02-04 01:00:14.597 (local time). This is an informational message only; no user action is required.
2007-09-25 10:40:53.90 spid5s SQL Trace ID 1 was started by login "sa".
2007-09-25 10:40:53.95 spid5s Starting up database 'mssqlsystemresource'.
2007-09-25 10:40:54.24 spid5s Server name is 'Billing2348'. This is an informational message only. No user action is required.
2007-09-25 10:40:54.24 spid9s Starting up database 'model'.
2007-09-25 10:40:54.40 Server Error: 17190, Severity: 16, State: 1.
2007-09-25 10:40:54.40 Server FallBack certificate initialization failed with error code: 1.
2007-09-25 10:40:54.40 Server Warning:Encryption is not available, could not find a valid certificate to load.
2007-09-25 10:40:54.40 Server Error: 17182, Severity: 16, State: 1.
2007-09-25 10:40:54.40 Server TDSSNIClient initialization failed with error 0x7e, status code 0x60.
2007-09-25 10:40:54.40 Server Error: 17182, Severity: 16, State: 1.
2007-09-25 10:40:54.40 Server TDSSNIClient initialization failed with error 0x7e, status code 0x1.
2007-09-25 10:40:54.40 Server Error: 17826, Severity: 18, State: 3.
2007-09-25 10:40:54.40 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-09-25 10:40:54.40 Server Error: 17120, Severity: 16, State: 1.
2007-09-25 10:40:54.40 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

I even copied the master database to a dev server and started it up deleted all certificates and endpoints but it gives the same error.

View 3 Replies


ADVERTISEMENT

Certificate Start Date Is Tomorrow - How To Make It Today?

Aug 16, 2006

Hi,

I use MS certificate server to request/make server certs but the "not before", or start date is tomorrow for a 1 year cert. I dont care how long but I want the cert to start immediately (today).

Regards,

Simon.

View 7 Replies View Related

Certificate Loading Issue - When Creating Certificate From SQL Server To SQL Server Express On The Same Machine

Jun 29, 2007

Hi, We are trying to implement Service Broker between SQL Server Express and SQL Server on the Same machine and we are having problems with certificates. We are creating a certificate on SQL Server, backing up the certificate on a file system and then loading certificate on the SQL Server Express from the file and we are keep getting the following error: Msg 15208, Level 16, State 1, Line 1 The certificate, asymmetric key, or private key file does not exist or has invalid format.



Following script runs fine on SQL Server.




Code Snippet

use master



Create Master Key Encryption BY Password = '45Gme*3^&fwu';

BACKUP MASTER KEY TO FILE = 'C:ServiceBrokerPrivateKeyMasterB.pvk'

ENCRYPTION BY PASSWORD = '45Gme*3^&fwu'

Create Certificate EndPointCertificateC

WITH Subject = 'C.Server.Local',

START_DATE = '06/01/2006',

EXPIRY_DATE = '01/01/2008'

ACTIVE FOR BEGIN_DIALOG = ON;

BACKUP CERTIFICATE EndPointCertificateC

TO FILE = 'C:ServiceBrokerEndPointCertificateC.cer'



Following script runs on SQL Server Express:






Code Snippet

Create Certificate EndPointCertificateC

From FILE = 'C:ServiceBrokerEndPointCertificateC.cer'

WITH PRIVATE KEY (

FILE = 'C:ServiceBrokerPrivateKeyMasterB.pvk',

DECRYPTION BY PASSWORD = '45Gme*3^&fwu'

);





If we run the script other way around, it works fine. If we use the SQL Server on some other machine, the script works fine. But only on the same machine, it throws this error. We made sure the permissions and everything. Let us know if there is any work around or what are we doing wrong.



Any help is appreciated. Thank you,

View 4 Replies View Related

Installing Certificate For SQL Server

Oct 29, 2007



Hi,

I€™m experimenting with creating Certificates for SQL Server. I can create a certificate ok, using the Certification Authority Wizard, however when I go into SQL Server Configuration Manager and view Protocols for MSSQLServer/Properties and click on the drop down list for Certificate €“ there€™s nothing there. When I create the certificate using the Wizard, I€™m only given the following stores to use: Personal, Trusted Root Certification Authorities, Enterprise Trust, Intermediate Certification Authorities, Trusted Publishers, Untrusted Certificates, Third-Party Root Certification Authorities and Trusted People. Does anyone know where I should be Importing the certificate to, or have any tips on what I need to do to view the certificate there?

Thanks,

View 3 Replies View Related

Certificate Limitations In SQL Server 2005

Dec 7, 2005

I have a Web site that has a database backend, which stores user information.  I would like to encrypt the user information in a granular way.

View 16 Replies View Related

Cannot Import Certificate Into Sql Server Express

Mar 12, 2008

Hi There

Are there limitations to express and certificates, i can create certificates in express. But when i try to import a certificate from another server (developer edition) into my express edition i get his error:


The certificate, asymmetric key, or private key file does not exist or has invalid format


When i use the same certificate backup on non express editions it works 100% , is it not possible or must it be done differently ?

Thanx

View 1 Replies View Related

Cannot Install Sql Server 2005 As SSL-certificate Is Missing

Mar 30, 2007

Hi there U all,



for the third time I am installing SQL-Server 2005 express and i have an error.

Cannot install sql because .NET 2.0 framework is missing allthough I have the .NET 2.0 framework allready installed and even re-installed it too. When trying again I get the message that there isn't an SSL-certificate present.



My question is, would this probably cause the error when installing?



Anyone?



Grtz and thx,



Recloose(Thomas)

View 1 Replies View Related

SQL Server Express Certificate Chain Problem

May 28, 2007



Hi All,



I was trying to install Sql Server Express 2005 using the setup made using Visual Studio 2005 Publisher Wizard, as a pre-requisite. During this i'm getting the following error...



"SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted."



What does this mean? Anyone is familiar with this, then pray please post a reply. I'm in the middle of nowhere now....



Thanks in Advance....



VigithVG

View 3 Replies View Related

SQL Server Setup Failed To Retrieve The SSL Certificate Name

Sep 19, 2005

 When I try to install SQL 2005 Developer September CTP on Windows XP Professional  it returns an error "SQL Server Setup failed to

View 21 Replies View Related

CERTIFICATE PROBLEM WHILE ENABLING SSL ON SQL SERVER 2005

Jun 13, 2007

Hi ,

How do we install a certificate for enabling security on MS -SQL Server 2005?
I tried to install through MMC but it says no " certificate authority found " . Any
help will be highly appreciated , Thanks to you all in advance :-)

Best Regards,

Sudhansu Tiwari

View 3 Replies View Related

SQL Security :: Importing Existing PEM Certificate Into Server

Oct 26, 2015

I must prepare a procedure which should export some data from some DB columns, but these data must be encrypted using the OpenSSL protocol, to be sent to an external recipient.This recipient sent to me a "public" certificate in PEM format, to what I understood (it is a file beginning with the expression "-----BEGIN CERTIFICATE-----", then a long Base64 sequence and then "-----END CERTIFICATE-----").

Then I didn't create the certificate nor I am a certification authority: I just have this public key (or, at least, a file from which I can extract a public key) and I must use it to encrypt data in order to obtain an output which must be analogue to what I can obtain when using this OpenSSL command line instruction:openssl rsautl -encrypt -in CF.txt -out CF.enc -inkey SaniteICF.cer -certin -pkcs

Then the question is: starting from this PEM file and nothing else, can I import it and store an asymmetric key or a certificate in SQL Server and use it to encrypt data to be exported?

View 9 Replies View Related

SQL Server Admin 2014 :: SSL Configuration - Unavailable Certificate

Oct 1, 2014

I want to use a certificate with 10-years expiration date. I created a new template certificate, based on default computer certificate, and I only change expiration date to 10 years.

In SQL Server SSL configuration, I dont view this certificate. In only view certificate created with the "Computer" template (with validity period of 365 days). All others certificates based on template are invisible to SQL Server

How can I use a custom template instead of the default "computer" template ?

View 0 Replies View Related

Error: Server Setup Faild To Retrieve The SSL Certificate Name

Jan 16, 2008

Hi
I am trying to install SQLEXPRESS 2005 and i get this error: SQL Server Setup faild to retrieve the SSL Certificate Name and an OK button and when i hit the button, the installiatoin stops.
The Event log shows this: Product: Microsoft SQL Server 2005 -- Error 1603. SQL Server Setup failed to retrieve the SSL Certificate Name.

Does anyone know what to do?

Thanx

View 2 Replies View Related

When Adding SSL Certificate To SQL Server, C++ Application No Longer Connects.

Apr 4, 2007

When adding SSL certificate to SQL Server, client applications no longer connect.





Error: 17832, Severity: 20, State: 10

2007-04-03 11:42:52.82 server Connection opened but invalid login packet(s) sent. Connection closed..



SSL is not even enabled and we still have this problem. When the cert is removed, then the app works???



EDIT: THis seems to be happening when we use dbopen().



Thank you,



Joel

View 8 Replies View Related

Import OpenSSL Certificate With Private Key Into Sql Server 2005 Express Edtion

Jul 7, 2006

hey,

i have a problem, to import a self signed openssl certificate into the sql server 2005.

my final idea is to get encrypted columns from the database over an jdbc connection in a java client.

when i use a certificate generated by the sql server 2005, i can encryt columns of a table. then i catch the

the result in my java client. but in java, i need a keystore with the private key of the certificate.

ok. i have export the the certificate and the private key of the sql server 2005.

problem: in a keystore i can only import the certificate (signed public key) but not the private key.

my new idea is to import an openssl certificate or an certificate generated by the keytool (java) into the

sql server 2005 and encypt the data with the imported certificate. Problem: The SQL Server give me an

Exception: (Sorry i drag & drop the exception, is written in german)

Msg 15208, Level 16, State 1, Line 2

Die Datei fĂĽr das Zertifikat, den asymmetrischen SchlĂĽssel oder den privaten SchlĂĽssel ist nicht vorhanden oder weist ein ungĂĽltiges Format auf.

My Import Statement is:



CREATE CERTIFICATE InsuranceCertOpenSSL

FROM

FILE = 'E:masterkeysinsuranceservice_tomcat_apr_x509_certificate_with_cygwin_openssl_20060630insuranceservice_tomcat_x509_certificate_with_openssl.crt'

WITH PRIVATE KEY (

FILE = 'E:masterkeysinsuranceservice_tomcat_apr_x509_certificate_with_cygwin_openssl_20060630insuranceservice_tomcat_x509_certificate_with_openssl_private.key',

DECRYPTION BY PASSWORD = 'testit2_',

ENCRYPTION BY PASSWORD = 'testit2_'

)

I use password encryption, and not the internal master key (or service master key)

Hope for help :)

nils



View 18 Replies View Related

Install SQL Server 2005 Express - The Certificate Chain Was Issued By An Authority That Is Not Trusted

Sep 6, 2006

Hi
I am trying to install SQL Server 2005 Express on my machine, which has Windows Server 2003 with Service Pack 1. I could not able to install properly and i am getting error always.
Here is the Error I am getting always "The certificate chain was issued by an authority that is not trusted" . I am trying for past few days i could not able to resolve.

Please help
Thanks
Here is the Error message from Summary.txt

Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Service Pack 1 (Build 3790)
Time : Tue Sep 05 12:31:18 2006

--------------------------------------------------------------------------------
Machine : SERVIDORCC
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Archivos de programaMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_SERVIDORCC_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted.
Error Number : 29515
--------------------------------------------------------------------------------

SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Tue Sep 05 17:12:41 2006

View 1 Replies View Related

Server Error 1431 When Setting Up Database Mirroring Using Local System Accounts And Certificate Authentication

May 24, 2006

I attempted to setup database mirroring using a High Availability scenario but when I installed SQL is chose to use local system accounts for all the services. Consequently, I stubled upon a microsoft article explaining how to setup mirroring using local system accounts and certificate authentication but I am stil not able to get it to work. When I try ti initiate the mirror from the mirror server I receive an error stating "Neither the partner nor the witness server instance for database "EDENLive" is available. Reissue the command when at least one of the instances becomes available." I have checked all the endpoints and everything seems to be in order. I even checked to make sure that each server was listening on the appropriate ports and I AM able to telnet to the ports. Please help!

View 1 Replies View Related

IS Same? (RS Start In Window Severvices V RS Start In Configration)

Mar 30, 2007



1) RS Start in Window Severvices
2) RS Start in Configration

1) and 2) Is Same?

I think that It looks like same Operation.

View 1 Replies View Related

Reg : Certificate

Mar 4, 2008

Hello all,

can ayone tell me which exam i have to pass to get sql 2005 certificate andi n which site or link will get more information.

would be appreciated .
thanks folks.

View 2 Replies View Related

Encryption With Certificate

Apr 19, 2007

 I am trying to create a encrypted row in my database Everything here worked except that when i run the final query to decrypt the data It just comes up with null for each row. Even if i do a query to show me the rows that are not null It's like it is saying yeah there is data here but I am only going to show you null instead of what I am supposed to decrypt.Here is what I tried from start to finish Create Certificate
TestCert
Encryption By Password = 'Password'
With Subject = 'SQLCert',
Expiry_Date = '12/01/2050';


declare @Test nvarchar(50)
set @Test='123456789'

insert into testenc (testencry)
Values
(encryptbyCert(Cert_ID('TestCert'),@Test ))


select convert (Nvarchar(50),
DecryptByCert(Cert_ID('TestCert'),
testencry,N'Password')) As Test
from testenc 

View 2 Replies View Related

Self-Signed Certificate

Mar 10, 2006

Can anybody can tell me how to do self-signed certificate on sql server? What is it ? Do we really need?
Many thanks.

View 12 Replies View Related

MSDBA Certificate

Dec 24, 2007

Hi,

does anybody have MSDBA certificate? I need some additional information on time, money costs, advantages, disadvantages, literature, etc.

I've browsed my local Microsofr partner as well as microsoft homepage, and haven't found any "interesting" feedback :)

thank you in advance

View 1 Replies View Related

Cannot Drop Certificate.

Apr 27, 2007

im trying to drop all certificates on my database, and then the master key, but cannot do this as there are objects encrypted by one particular cert that i called fcert. I done this ages ago and cannot remember what i encrypted with this cert. to drop the master key i have to drop the cert and to drop the cert i have to make sure no objects are encrypted by it. how is this achieved?

View 1 Replies View Related

Certificate Encryption

Apr 22, 2008

i'm totally stuck, i know i must be missing something, just can't find it.. here's my situation:

tbl_user (ssn char(9), ssn_encrypted varchar(9));

CREATE CERTIFICATE AUTOCERT WITH SUBJECT = 'Salad', EXPIRY_DATE = '1/1/2099';GO


UPDATE tbl_userset ssn_encrypted = encryptbycert(cert_id('AUTOCERT'),SSN)go

select ssn, ssn_encrypted from tbl_user

results look good. encryption worked.

SELECT ssn, decryptbycert(cert_id('AUTOCERT'),ssn_encrypted) FROM tbl_user

results of select statement show ssn_encrypted = null for every record.

why is it null? how can i get decryption to work?

View 4 Replies View Related

Add A PFX Certificate Into A SQL Database

Mar 6, 2008

I can use "CREATE CERTIFICATE" to add a CER certificate into a SQL database. How can I do so with a PFX certificate? From the document, it can be done so with a CER file and a PVK file, but only a PFX file.

View 1 Replies View Related

Create Certificate

Dec 6, 2006

hey,
I am
having a weired issue(donno whether its weired or not.). I have a user
who has db_owner rights on a database. But when he is trying to create
a certificate he is getting error.
"Msg 15247, Level 16, State 1, Line 1
User does not have permission to perform this action."
Remember he is having db_owner rights on that particular database. is there any other permission that i have to give him.

View 5 Replies View Related

Removing A Certificate

Apr 28, 2008



Hi i'm having issues removing this certificate

select * from sys.certificates





I see


cert_xp_cmdshell_enabler 257 1 NA NO_PRIVATE_KEY 1 Enable xp_cmdshell c5 30 7d 58 ba 8e 96 a6 48 48 df ca 87 bc 91 44 0x010600000000000901000000BEC4CB23E7994CFF1E71403F906BB1EFFDDEAF9A S-1-9-1-600556734-4283210215-1061187870-4021382032-2595217149 Enable xp_cmdshell 2009-04-28 10:31:31.000 2007-04-28 10:31:31.000 0xBEC4CB23E7994CFF1E71403F906BB1EFFDDEAF9A NULL


DROP CERTIFICATE cert_xp_cmdshell_enabler


he certificate cannot be dropped because one or more entities are either signed or encrypted using it.


Is there any way I can drop this as I would like to recreated it and add a whole host of sps that I need to use the xp_cmdshell.


Thanks in advance.







View 4 Replies View Related

Certificate Not Yet Valid

Dec 22, 2006

Hi guys,



I'm having this really strange issue with mirroring.

I've followed the instructions on http://msdn2.microsoft.com/en-us/library/ms191140.aspx to the letter, leaving out the witness server part, as I don't have one.



All works OK, but when activating the mirroring on the principal server I get the usual error 1418 error. I fired up SQL Server Profiler to see what was happening, and the following error emerged.

Connection handshake failed. The certificate used by the peer is invalid due to the following reason: Certificate not yet valid. State 104.



Anyone have any ideas?

View 3 Replies View Related

SQL Express SSL Certificate

Sep 30, 2006

Hello:

I am trying to get SQL Express to use a certificate for SSL encryption between the server and client. Our company has a certificate server and I already did generate a server certificate from it. I installed the certificate in the "local machine" store and I also have the CA certificate in the trusted root on the server machine. (XP PRO)

When I use the configuration tool, I get to the "protocols for SQLEXPRESS" area, I click properties, I select the certificate tab, but there are no certificates available from which to choose.

Can someone shed some light on where I might go from here?

Larry



View 3 Replies View Related

Certificate Not Found

Jun 30, 2006

Hello,

I have two different instances of sql server 2005 but i get

Connection handshake failed. The certificate used by the peer is invalid due to the following reason: Certificate not found. State 89.

This is one of the two instances:

use master

--ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'dsjdkflJ435907NnmM#sX003'

create master key encryption by password = 'hello'

create certificate [Certificato2]

from file = 'c:certsTransportCert2.cer'

with private key (FILE='c:certsTransportCert2.pvk',

decryption by password='simone')

active for begin_dialog = ON

 

CREATE LOGIN [M02] WITH PASSWORD = 'wrPqYkr%bm3';

ALTER LOGIN [M02] DISABLE;

CREATE USER [M02] FROM LOGIN [M02];

GO

create certificate [Certificato1]

authorization [M02]

from file = 'c:certsTransportCert1.cer'

active for begin_dialog = ON

GO

 

USE PublisherdDB

--ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'dsjdkflJ435907NnmM#sX003'

create master key encryption by password = 'hello'

create certificate [CertificatoDialogo2]

from file = 'c:certsDialogCert2.cer'

with private key (FILE='c:certsDialogCert2.pvk',

decryption by password='simone')

active for begin_dialog = ON

 

CREATE USER [Proxy::IsDbLookupRequestServiceM02] WITHOUT LOGIN;

GO

create certificate [CertificatoDialogo1]

authorization [Proxy::IsDbLookupRequestServiceM02]

from file = 'c:certsDialogCert1.cer'

active for begin_dialog = ON

 

CREATE REMOTE SERVICE BINDING [RSB::IsDbLookupRequestServiceM02]

TO SERVICE 'IsDbLookupRequestServiceM02'

WITH USER = [Proxy::IsDbLookupRequestServiceM02],

ANONYMOUS = OFF;

GO

CREATE ROUTE [Route::IsDbLookupRequestServiceM02,D516E70B-59D6-4BF4-882A-BDA7ACD6EB07] WITH

SERVICE_NAME = 'IsDbLookupRequestServiceM02',

ADDRESS = 'tcp://PORTATILEXP:4022';

GO

GRANT SEND ON SERVICE::[IsDbLookupResponseService] TO [Proxy::IsDbLookupRequestServiceM02]

GO

 

USE MASTER

CREATE ENDPOINT [BROKER]

AUTHORIZATION [VIDEOSYSTEMSimone_Farinea]

STATE=STARTED

AS TCP (LISTENER_PORT = 4033, LISTENER_IP = ALL)

FOR SERVICE_BROKER (MESSAGE_FORWARDING = DISABLED

, MESSAGE_FORWARD_SIZE = 10

, AUTHENTICATION = CERTIFICATE [Certificato2]

, ENCRYPTION = REQUIRED ALGORITHM RC4)

GRANT CONNECT ON ENDPOINT::[BROKER] TO [M02];

 

Here is the second one:

use master

--ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'hello'

create master key encryption by password = 'hello'

create certificate [Certificato1]

from file = 'c:certsTransportCert1.cer'

with private key (FILE='c:certsTransportCert1.pvk',

decryption by password='simone')

active for begin_dialog = ON

 

 

CREATE LOGIN [SIMONEX] WITH PASSWORD = 'wrPqYkr%bm3';

ALTER LOGIN [SIMONEX] DISABLE;

CREATE USER [SIMONEX] FROM LOGIN [SIMONEX];

GO

 

 

create certificate [Certificato2]

authorization [SIMONEX]

from file = 'c:certsTransportCert2.cer'

active for begin_dialog = ON

GO

 

 

USE vsi

--ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'hello'

create master key encryption by password = 'hello'

create certificate [CertificatoDialogo1]

from file = 'c:certsDialogCert1.cer'

with private key (FILE='c:certsDialogCert1.pvk',

decryption by password='simone')

active for begin_dialog = ON

CREATE USER [Proxy::IsDbLookupResponseService] WITHOUT LOGIN;

GO

create certificate [CertificatoDialogo2]

authorization [Proxy::IsDbLookupResponseService]

from file = 'c:certsDialogCert2.cer'

active for begin_dialog = ON

GRANT SEND ON SERVICE::[IsDbLookupRequestServiceM02] TO [Proxy::IsDbLookupResponseService]

GO

 

CREATE ROUTE [Route::IsDbLookupResponseService,88EB00C4-8CA9-4B45-9899-677AA70818B1] WITH

SERVICE_NAME = 'IsDbLookupResponseService',

ADDRESS = 'tcp://SIMONEX:4033';

GO

 

 

 

USE MASTER

CREATE ENDPOINT [BROKER]

AUTHORIZATION [VIDEOSYSTEMSimone_Farinea]

STATE=STARTED

AS TCP (LISTENER_PORT = 4022, LISTENER_IP = ALL)

FOR SERVICE_BROKER (MESSAGE_FORWARDING = DISABLED

, MESSAGE_FORWARD_SIZE = 10

, AUTHENTICATION = CERTIFICATE [Certificato1]

, ENCRYPTION = REQUIRED ALGORITHM RC4)

GRANT CONNECT ON ENDPOINT::[BROKER] TO [SIMONEX];

What's wrong in my code?

Many thanks.

 

 

View 1 Replies View Related

3 Questions About Certificate

Nov 1, 2007

As we know ,certificate is a digitallly-signed security object that bind the public key to the principal who holds the private key.




Say i create a certificate by using create certificate DDL, then use it to encrypt data and decrypt data as follows:





Code Block
create certificate cert1 encryption by password='p@ssw0rd1' with subject='certificate test'
go
declare @plaintext varchar(100)
set @plaintext='abcd'
declare @cipher varbinary(8000)
set @cipher=encryptbycert(cert_id('cert1'),@plaintext)
select convert(varchar,decryptbycert(cert_id('cert1'),@cipher,N'p@ssw0rd1'))












Is that mean i create public key implicitly when i run "create certificate cert1 encryption by password='p@ssw0rd1' with subject='certificate test'"?

What cryptography algorithm would be use when i use the certificate to encrypt data ?
Where is private key? I ensure I use the public key which generated from "create certificate " DDL to encrypt data .I want to know which private key i used when i execute decryptbycert to decrypt.



View 7 Replies View Related

Certificate Not Found

Feb 19, 2007

Hello I haw trouble getting the service broker to work I have 3 instances of SQL servers:

1 €śSender€? SQL 2005 Server
2 €śReceiver 1€? SQLEXPRESS 2005
3 €śRecevier 2€? SQLEXPRESS 2005

What I wont is to be abele to do is to send a message from €śSender€? to €śReceiver 1€? or €śRecevier 2€?.

I am abele to send a message from €śSender€? to €śReceiver 1€? but if I send a message to €śReceiver 2€? I get a dialog security problem I think. If I use profiler I can se in €śReceiver 2€? the events:

Broker:Connection
Audit Broker Login
Broker:Message Classify
Audit Broker Conversation = Certificate not found
Broker:Message Undeliverable

And I cant find what´s wrong, this Is my scripts for etch instance.

€śSender€?

USE master

CREATE CERTIFICATE Cert_ROBOTSRV
WITH SUBJECT = 'Cert_ROBOTSRV_auth',
START_DATE = '02/15/2007',
EXPIRY_DATE = '02/15/2015'
GO
BACKUP CERTIFICATE Cert_ROBOTSRV TO FILE = 'C:Cert_ROBOTSRV'

GO

CREATE ENDPOINT SBEndpointServer STATE = STARTED
AS TCP (LISTENER_PORT = 5723)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE Cert_ROBOTSRV)

GO
CREATE USER andon


CREATE CERTIFICATE Cert_sevapc311_pub AUTHORIZATION andon
FROM FILE = 'C:Cert_sevapc311'

--DROP CERTIFICATE Cert_Andonpc017_Trans
CREATE CERTIFICATE Cert_Andonpc017_Trans AUTHORIZATION andon
FROM FILE = 'C:Cert_andonpc017_Trans'

--DROP LOGIN sbLogin
CREATE LOGIN sbLogin
FROM CERTIFICATE Cert_Andonpc017_Trans;
GO

GRANT CONNECT ON ENDPOINT::SBEndpointServer TO [public]


GRANT CONNECT ON ENDPOINT::SBEndpointServer TO andon
GO

----------------------------------------------------

USE AndonDB
CREATE ROUTE Grafik_sevapc311
WITH SERVICE_NAME = 'Grafik_Service_Recive_sevapc311',
BROKER_INSTANCE = '7C737F42-2DF6-46E7-A6B6-89D1A9608DE2',
ADDRESS = 'TCP://sevapc311:5723'
GO

--DROP ROUTE Grafik_andonpc017
CREATE ROUTE Grafik_Andonpc017
WITH SERVICE_NAME = 'Grafik_Service_Recive_Andonpc017',
BROKER_INSTANCE = 'AE2B294A-B02E-4709-A51E-CFBFD0E478C1',
ADDRESS = 'TCP://192.168.20.106:5723'
GO



CREATE CERTIFICATE Cert_ROBOTSRV_Dialog
WITH SUBJECT = 'Cert_ROBOTSRV_auth',
START_DATE = '02/15/2007',
EXPIRY_DATE = '02/15/2015'
GO
BACKUP CERTIFICATE Cert_ROBOTSRV_Dialog TO FILE = 'C:Cert_ROBOTSRV_Dialog'
GO

CREATE CERTIFICATE Cert_sevapc311_pub_Dialog AUTHORIZATION andon
FROM FILE = 'C:Cert_sevapc311_Dialog'

--DROP CERTIFICATE Cert_andonpc017_Dialog
CREATE CERTIFICATE Cert_Andonpc017_Dialog AUTHORIZATION andon
FROM FILE = 'C:Cert_andonpc017_Dialog'

GRANT SEND ON SERVICE::[Grafik_Service_Send_ROBOTSRV]
TO andon

CREATE USER sbLogin

GRANT SEND ON SERVICE::[Grafik_Service_Send_ROBOTSRV]
TO sbLogin
GO
--GRANT SEND ON SERVICE::[Grafik_Service_Send_ROBOTSRV]
--TO [VADERSTADvrobot]
--GO

-- Grant RECEIVE permission on the queue.
GRANT RECEIVE ON [Grafik_Queue]
TO andon
GO
GRANT CONTROL ON SERVICE::[Grafik_Service_Send_ROBOTSRV]
TO andon
GO


--DROP REMOTE SERVICE BINDING Grafik_sevap
CREATE REMOTE SERVICE BINDING Grafik_sevap
TO SERVICE 'Grafik_Service_Recive_sevapc311'
WITH USER = andon
GO

--DROP REMOTE SERVICE BINDING Grafik_andonpc017
CREATE REMOTE SERVICE BINDING Grafik_andonpc017
TO SERVICE 'Grafik_Service_Recive_Andonpc017'
WITH USER = andon


€śReceiver 1€?

use master


CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'andonANDON'


CREATE CERTIFICATE Cert_sevapc311
WITH SUBJECT = 'Cert_sevapc311_Auth',
START_DATE = '02/15/2007',
EXPIRY_DATE = '02/15/2015'

GO

BACKUP CERTIFICATE Cert_sevapc311 To FILE = 'C:Cert_sevapc311'

CREATE ENDPOINT SBEndpointklient STATE = STARTED
AS TCP (LISTENER_PORT = 5723)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE Cert_sevapc311)


CREATE CERTIFICATE Cert_ROBOTSRV_pub AUTHORIZATION andon
FROM FILE = 'C:Cert_ROBOTSRV';

GRANT CONNECT ON ENDPOINT::SBEndpointklient to andon


----------------------------------------------------------------------------------
use KlientDB

GRANT SEND ON SERVICE::[Grafik_Service_Recive_sevapc311]
TO andon
GO

GRANT CONTROL ON SERVICE::[Grafik_Service_Recive_sevapc311]
TO andon
GO

GRANT RECEIVE ON [Grafik_Queue]
TO andon
GO


CREATE Route Grafik_ROBOTSRV
WITH
SERVICE_NAME = 'Grafik_Service_Send_ROBOTSRV',
BROKER_INSTANCE = '2BA192F8-0BA3-4237-A156-21AFF7C65481',
ADDRESS = 'TCP://ROBOTSRV:5723'

CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'andonANDON'


CREATE CERTIFICATE Cert_sevapc311_Dialog
WITH SUBJECT = 'Cert_sevapc311_Auth',
START_DATE = '02/15/2007',
EXPIRY_DATE = '02/15/2015'

GO

BACKUP CERTIFICATE Cert_sevapc311_Dialog To FILE = 'C:Cert_sevapc311_Dialog'


CREATE CERTIFICATE Cert_ROBOTSRV_pub_Dialog AUTHORIZATION andon
FROM FILE = 'C:Cert_ROBOTSRV_Dialog';


€śReceiver 2€?

use master

CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'andonANDON'

--DROP CERTIFICATE Cert_Andonpc017_Trans
CREATE CERTIFICATE Cert_Andonpc017_Trans
WITH SUBJECT = 'Cert_Andonpc017_Auth',
START_DATE = '02/15/2007',
EXPIRY_DATE = '02/15/2015'

GO
BACKUP CERTIFICATE Cert_Andonpc017_Trans To FILE = 'F:Cert_Andonpc017_Trans'

CREATE ENDPOINT SBEndpointklient STATE = STARTED
AS TCP (LISTENER_PORT = 5723)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE Cert_Andonpc017_Trans)


--DROP USER andon
CREATE USER andon


--DROP CERTIFICATE Cert_ROBOTSRV
CREATE CERTIFICATE Cert_ROBOTSRV AUTHORIZATION andon
FROM FILE = 'C:Cert_ROBOTSRV';

CREATE LOGIN sbLogin
FROM CERTIFICATE Cert_ROBOTSRV;
GO

GRANT CONNECT ON ENDPOINT::SBEndpointklient TO [public]
--Select * from sys.certificates


---------------------------------------------------------------
use KlientDB

create user andon

Grant SEND ON SERVICE::[Grafik_Service_Recive_Andonpc017] to [Public]

GRANT SEND ON SERVICE::[Grafik_Service_Recive_Andonpc017]
TO andon
GO

GRANT CONTROL ON SERVICE::[Grafik_Service_Recive_Andonpc017]
TO andon
GO

GRANT RECEIVE ON [Grafik_Queue]
TO andon
GO


--DROP Route Grafik_ROBOTSRV
CREATE Route Grafik_ROBOTSRV
WITH
SERVICE_NAME = 'Grafik_Service_Send_ROBOTSRV',
BROKER_INSTANCE = '2BA192F8-0BA3-4237-A156-21AFF7C65481',
ADDRESS = 'TCP://ROBOTSRV:5723'

--Dialog Säkerhet
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'andonANDON'

--Drop CERTIFICATE Cert_Andonpc017_Dialog
CREATE CERTIFICATE Cert_Andonpc017_Dialog
WITH SUBJECT = 'Cert_Andonpc017_Auth',
START_DATE = '02/15/2007',
EXPIRY_DATE = '02/15/2015'

GO

BACKUP CERTIFICATE Cert_Andonpc017_Dialog To FILE = 'F:Cert_Andonpc017_Dialog'

--Drop CERTIFICATE Cert_ROBOTSRV_Dialog
CREATE CERTIFICATE Cert_ROBOTSRV_Dialog AUTHORIZATION andon
FROM FILE = 'C:Cert_ROBOTSRV_Dialog';

View 2 Replies View Related

SQL Server Reporting Services 2005 Service Would Not Start On Windows Server 2003

Dec 13, 2007

SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.

Here is the error in Event log


Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved