Cannot Start Your Application. The Workgroup Information File Is Missing Or Opened Exclusively By Another User.
Aug 24, 2007
hye everyone,
when i browse my web application the eror as below display..
what should i do..
any suggestion or tips...
"Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Cannot start your application. The workgroup information file is missing or opened exclusively by another user. "
thanks in advance..
thank you very much..
View 1 Replies
ADVERTISEMENT
May 7, 2008
Hi all,
I'm kinda new at programming, and am currently attempting to create a web application. I have an error when I try to insert information into a sql server database, and can't find how to fix it no matter how hard I try.
The error I get is: Cannot start your application. The workgroup information file is missing or opened exclusively by another user.
I have it so a user is logged in and is shown a form to fill out, then submits it (which creates an insert statement and sends it to the database).
My connection string is as follows:
CnnString = "Provider=Microsoft.Jet.OLEDB.4.0;" + "data source=serverdestination;" + "User id=user;" + "Password=pass;";
If you need any more information, just let me know.
Any help would be greatly appreciated!
View 2 Replies
View Related
Aug 8, 2006
I would like to password protect my MS Access Database which is being exported to from SQL 2000 using DTS, but when I password protect it, I get an error message stating "The workgroup information file is missing or opened exclusively by another user". The ACCESS file has to be opened exclusively to add password protection. Any suggestions?
View 1 Replies
View Related
May 8, 2008
Hi folks,
For the past couple of days, I have been trying to get my SQL Server to work with Distributed Views. I am created linked servers, linked server logins, set XACT Abort ON.
I am successful in running a select against the distributed view, but was unable to run an "INSERT"
When I try a simple insert, the query took 3:14 minutes. Then I get an error message like:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I have checked that MSDTC is running and configured under a domain account on both machines - running sQL 2000 and win2K
I have been unsuccessful still after tinkering for several days. I have checked my network configurations and noticed that when I try to ping the other machine by name, I don't get a response. I can only get a response to a ping when I enter the IP address directly.
Could this be a problem? Also, I noticed that for some strange reason, whenever I ping from either machine it is showing an external IP - always the same one no matter which computer name I try to ping. Something like 209.xxx.xxx.xxx instead of the 192.xxx.xxx.xxx that I expect.
Finally, I thought that problem was possibly due to incorrect Active Directory configuration. I tried to remove both machines from the domain by changing them to a workgroup "TEST" instead of the domain.
When I restarted the PC, I am unable to start SQL Server. It shows the Red Stop sign. When I try to start it, it gives an error like: Service could not start because one or more dependencies failed.
When I add the machine back to the domain, SQL server starts working on reboot.
Can anyone help me please.
Thanks.
View 7 Replies
View Related
Sep 9, 2006
i have SQL Server 2005 Workgroup Edition
how to connect to it from vb.net 2005 because i try but no use
thanks in advance.
View 4 Replies
View Related
Jun 21, 2007
I'am doing functionality test on DTS packages and saving my DTS packages to meta data services instead of saving them as local packages. We would like to see what information would be provided by saving them this way, but when we try to open the meta data browser (the 3rd icon under DTS) we get the following error:
An error occurred while trying to access the database information. The msdb database could not be opened.
View 3 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Aug 14, 2007
I have a serious problem with either SQL Server or SQL Reporting Services. I have 7 tables in a database that are relational. I have created serveral reports against this database. Last week when I pulled one of the reports, I was missing information on one of the cells. The reason why I know this is because my boss has us verify the report against the database. That took about an hour to complete. When we found that the report was not correct I repulled the report and the cell that was empty, was now populated. What gives? This is the same report I have pulled for the last month and had no problems until now. Is there a time issue involved between the last update to the database to the time I pull the report? Or maybe there is something wrong with the query?
SELECT Lease.[Lease #], MineralContacts.[Mineral Owner First Name], MineralContacts.[Mineral Owner Last Name], Tract.County, Tract.[Tract Number],
Tract.[Tract Description], Tract.Section, Tract.Block, Tract.Survey, Tract.Abstract, Lease.[Lease Date], Tract.[Title Check Though], Tract.[2ndTitleReview],
Tract.[2nd R/S Complete], Tract.[Title Agent], Tract.[Tract Gross Acres], SubTract.[Tract Net Acres], Draft.[Draft Status], Draft.[Draft Due Date],
Draft.[Draft Amount], Draft.[Draft #], Draft.[ANB Invoice #], Draft.[Lse File Sent to CP], Draft.[Money Wired from CP to EA],
Draft.[STA Approved Draft for pmt], Draft.[STA Recommend to Return Daft], Draft.[KE Advised ANB to Pay Draft], Draft.[KE Advised ANB to Return Draft],
Draft.[Paid Draft Recd], SubTract.Comments, SubTract.Hide
FROM Tract INNER JOIN
SubTract ON Tract.TractID = SubTract.TractID INNER JOIN
Mineral ON SubTract.SubTractID = Mineral.SubTractID INNER JOIN
Lease ON Mineral.MineralID = Lease.MineralID INNER JOIN
Draft ON Lease.LeaseID = Draft.LeaseID INNER JOIN
MineralContacts ON Mineral.MineralID = MineralContacts.MineralID
WHERE (Draft.[Draft Status] IS NOT NULL) AND (Draft.[Draft Due Date] IS NOT NULL)
View 1 Replies
View Related
Dec 7, 2006
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
View 3 Replies
View Related
Mar 3, 2008
Hi all,
I'm using VS2005 + SQL Compact 3.1 and Enterprise Library 3.1 May 2007
I can successfully create a db using pull method, when I try to push back data I got the following SQLCE error:
"Another user has opened the database with different instance-level initialization properties. [ 32 ]"
Before calling the push method I did
SqlCeDatabase eCE = Helper.GetDB() as SqlCeDatabase;
eCE.CloseSharedConnection();
SqlCeConnectionPool.CloseSharedConnections();
SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess();
rda.InternetUrl = webSynchronizationUrl;
rda.InternetLogin = webuser;
rda.InternetPassword = webpass;
rda.LocalConnectionString = eCE.ConnectionStringWithoutCredentials;
but after the assignment the LocalConnectionString is different from ConnectionStringWithoutCredentials, there are much more ssce parameters.
What I don't understand is:
why I'm getting this error even after closing the connection ?
Since the error report [32] the ssce conflicting parameters shoud be AUTO_SHRINK_THRESHOLD, FLUSH_INTERVAL and MAX_DATABASE_SIZE
I tried to cut & paste the same values from LocalConnectionString into app.config connection string, at first It seemed to work, but now I got the same error.
Any help will be greatly appreciated
Thanks
View 3 Replies
View Related
Mar 3, 2006
My config :
1 computer with win2000, IIS, McAfee Virus Scan, and all I need to develope.
1 computer with VS2005.
When I try to make merge replication I have this Error :Header information is either corrupted or missing.
I search on the web and find some information like that error is cause by NIS (Norton Internet Security) but I dont have it.
I have another mobile software in VS 2003 and I don't have trouble whit im. It work perfectly but not in VS 2005.
I can access to the replication folder. I use sscesa20.dll.
Need help
thanks.
View 2 Replies
View Related
Mar 3, 2004
Hi
I am using MS Access project as a frontend and MSDE 2000 as a backend database. I have few users and i want to give every one restricted access to database based on their use.
How can i create user accounts. I checked tools-->Security--> but workgroup admin option is not active. How to solve this puzzle
Thanks in advance
Neha
View 1 Replies
View Related
Apr 2, 2007
hi
with my ssis-package i have to read several flatfiles. this files are stored in different folders on a unix machine. in my loop-task i have first a script, that checks whether the file exists. it does, so i set the path to a variable. in the connection-manager for the flat-file i have set source for the file to that variable. the bulk-insert-task starts, read the file and everithing is cool. but, sometimes, the package fails with this message:
[Bulk Insert Task] Error: An error occurred with the following error message:
"Cannot bulk load because the file "\Owpu0kas 0 0 5
eceivedw000005.090"
could not be opened. Operating system error code 53(error not found)."
i stop the degugging-mode, restart debuging and what happens? it runs ... maybe for the next one, two or three files and the error comes again, but never on the same file. i'm going crazy, what can i do?
thanks for your help.
View 3 Replies
View Related
Dec 5, 2006
Hello everyone,
I have been playing with a Standard Version of VS 2005 and SSE 2005 and I just cannot get these two to interact together well. I am sure it is a noob problem but I have seen this error addressed on this forum and I am just not getting it. Here is exactly what I am doing.
I want to create a database within SSE using the Management Studio. Then, I want to connect to it with VS2005. Both SSE and VS2005 are local. I just cant seem to get this to work.
I always seem to get this error "An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataSecond.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
One thing... I create the website with Location: HTTP. I don't even know anymore why I do this.. I think because I like to be able to pull up a browser and get to my app. Other than that I am doing nothing special. However, I get the above error when I hit F5 to run the app inside VS2005.
Is there someplace where a complete noob can find a thorough and simple covering of this? Again, I have read through some of the previous posts on this and I don't understand too many of them and it seems as if there are at least 13 causes of which I don't know which one I have. Help!
Thanks.
View 30 Replies
View Related
Oct 24, 2015
missing witness server information and the fail-over is broken suddenly? 4:00am no maintenance job. I have one sql job on 10pm for backup on database transaction log only.
I can see the primary have problem then perform fail-over to mirror database, the auto fail-over was broken.
I re-build the sql mirror is OK , but i want to find the root cause.
Windows application event was full when there have many failed event, i have increase log size for application event. Â
View 7 Replies
View Related
Aug 16, 2006
Hi
I've build a client management (Windows) application in VS2005 which works fine on the local development machine but falls over when trying to connect to the SQL Server Express file located on a second machine on the same Workgroup. Several of the apllications will connect to the database file from networked computers.
The error I get when testing the connection or trying to connect via the App is:---------------------------------------------------------------The file "Z:BushBreaks.MDF" is on a network path that is not supported for database files.An attempt to attach and auto-named database for file z:ushbreaks.mdf failed. A database with the same name exists, or specified file cannot be opened or it is on a UNC share.---------------------------------------------------------------
How can I configure this database and/or connection to be able to allow connections to the MDF file? Please note that security is not an issue if that is at all relevant.
Many ThanksJohn
View 1 Replies
View Related
Nov 13, 2015
Now I'm trying to implement logic to check if excel file is opened or not if open send out email in Script task. Using c#
I'm using this one but it's not working fine. always give me file is opened
public void Main()
       {
           Boolean FileLocked = true;
               // Check if the file isn't locked by an other process   Â
               try
[Code] ....
View 4 Replies
View Related
Aug 10, 2006
I have a 2003 Server which has two Named Instances of SQL Server 2000.
I need to add a third Named Instance, but when I logged onto the Server this morning, I noticed that all of the
'Microsoft SQL Server' Entries are missing from the START/PROGRAMS menu !! Enterprise Manager, BOL... everything!! The SQL Server Service Manager is running and both of my Instances are up and running (this is a production box). I can launch Enterprise Manager from MMC.EXE in WINDOWSSystem32 folder... very weird!!!!
In my Add/Remove Programs, I see MS SQL Server listed Twice.. one time for each of the two named Instances.
Has anyone ever seen this before??? Do you think it's safe to run SQL Server Installation to Install a Third Instance on this box???
View 1 Replies
View Related
Jan 23, 2007
I am facing a issue with bulk upload on Test Server.
Issue: When running Openrowset command from SQL server other that Test Server query runs fine when trying to run the same command from Test Server it gives error.
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\ServerNameinputFileName.csv" could not be opened. Operating system error code 5(Access is denied.).
For example: If the command is run from System A connecting to SQL Server instance on Test Server Test Server it gives this error. If the same command with same rights is run from any other SQL server instance say Dev1 its running fine.
If the command is run from Test Server connecting to any SQL Server instance including Test Server it is running fine.
Tried: 1) Given the read/write rights on shared folder, to user under which the SQL server service is running on Test Server
2) Given the read/write rights on shared folder to everyone.
Query:
SELECT DISTINCT * FROM OPENROWSET
(
BULK '\ServerNameinputFileName.csv',
FORMATFILE='\ServerNameFormat.xml'
)
AS FileList
Please provide me with some solution. What can be the reason for such behaviour?
View 22 Replies
View Related
Feb 1, 2007
I have a package that does an FTP and some File System Tasks. It runs perfectly fine in BIDS but doesn't want to run via SQL Agent. Is the SQL Server Edition the problem?
View 8 Replies
View Related
Dec 14, 2006
Dear friends,
I am working in .net windows application with sql server 2000. My problem is like some times sql server service automatically stoped when restart my machine.Then i start the service manually.after that if i restart my machine it not affect the service.I mean only at first time restart the machine make this problem. Anybody know any solution for this problerm?.
Also how can i anable TCP/IP through application.
Thanks & Regards
Jesseja
View 1 Replies
View Related
Nov 24, 2003
Hello,
I was wondering if someone could help me answer this question.
If I had a site like Yahoo, that constantly had users accessing it. Would it be a good or bad idea to automatically open a database connection to SQL Server on Application Start? What would you recommend? Would opening and closing the DB connection on every page save alot of overhead and bottleneck? Thank You.
View 2 Replies
View Related
Apr 28, 2008
Hi all hope some one can help - please bear with me new to this
Basically I have had to change pc's so I copied and pasted my ASPNET.MDF and LDF from my old pc to new PC including webpages/apps etc.. created.
However now all I get is "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path """"
Just don't understand what permissions the db should have, does it need to match the SQL Express owner...
any help would be most appreciated
Thanks
Chris
View 5 Replies
View Related
Jun 21, 2005
I installed my asp.net 2.0 web application and sql express june editon on my windows 2003 server.When the application tries to reach the database i am getting the following error"Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed."I can understand that it has something to do with user right but more than that I am pretty lost. Can anyone translate this error for me and give me some tips on what do to.I checked first the user running the sql express service and saw it was the NETWORK SERVICE user. I changed it to be the local system account but that did not make any difference. The application is running just fine on my local computer(Win XP sp2). This one has SQL express April edition though.
View 3 Replies
View Related
Mar 27, 2007
Hi All,
What are the points needed to be taken care of before starting develop an application that uses sql express as a local database. For example is there a need for an early configuration to make all end users (after the installing app from a cd to their own machines) of the application to connect to the database that I am designing. I saw many posts related to this issue but none of them describes the process step by step. So if an experienced guy/girl outlines the steps I would be delightful.
Thanks in advance.
View 8 Replies
View Related
Jul 4, 2014
Has experienced this error when trying to open SSMS? Was working fine earlier. I have tried uninstall/reinstall, a few reboots,repairing the install, etc.
View 5 Replies
View Related
Jun 12, 2015
We have an issue where servers goes slow from morning 2 AM EST to 10 AM EST.
Using SP_WhoIsActive we somehow found that there is netbackup from Symantec which runs during that time phrase.
As per Symantec team there backup should get over by 5 AM EST, per their testing for almost 100 Dbs on the server( not big in size , all of them in total would be 60 GB).
Using SP_whoisactive we only see, start time of that virtual backup occurring on tape, for one database at time.
So is there a way we actually determine when does the above backup kicks and stops?Also, could SQL server be the problem in making these backups run slow or there is something else i need to monitor?
View 6 Replies
View Related
Jan 19, 2005
I need to write an auditing trigger that will capture time of an insert and user that is making the insert. The time part i think i can use getdate(), but how can I find out which user is making the insert? Any help appreciated.
View 2 Replies
View Related
Jun 24, 2004
Hi,
I'm trying to get the information about the user who modified the record in the table. I'm able to capture the datetime of modification through trigger.
CREATE TRIGGER [upd_dtm] ON dbo.Sample
FOR INSERT, UPDATE
AS
BEGIN
UPDATE Sample SET update_dtm = (SELECT GETDATE())
WHERE Sample.ID IN (SELECT ID FROM inserted)
END
I'm stuck, how to get the User who modified it?
Any help is greately appreciated!
View 8 Replies
View Related
Aug 27, 2015
I need to find the missing months in a table for the earliest and latest start dates per ID_No.  As an example:
create table #InputTable (ID_No int ,OccurMonth datetime)
insert into #InputTable (ID_No,OccurMonth)Â
select 10, '2007-11-01' Union all
select 10, '2007-12-01' Union all
select 10, '2008-01-01' Union all
select 20, '2009-01-01' Union all
select 20, '2009-02-01' Union all
select 20, '2009-04-01' Union all
select 30, '2010-05-01' Union all
select 30, '2010-08-01' Union all
select 30, '2010-09-01' Union all
select 40, '2008-03-01'
For the above table, the answer should be:
ID_No OccurMonth
----- ----------
20 2009-02-01
30 2010-06-01
30 2010-07-01
1) don't include an ID column,
2) don't use the start date/end dates in the data or
3) use cursors, which are forbidden in my environment.
View 9 Replies
View Related
Apr 23, 2001
Hi All,
I'd like to be able run some SQL or t-SQL to get a list of all
databases that a user has access to....
Something like below....
select databases
from ?
where usedid = 'david'
--->
databases
-----------------
Northwind
Pubs
master
View 1 Replies
View Related
Nov 29, 2007
dear folks,
Does anyone know how can I get concurrent user information on Microsoft SQL Server 2000/2005….?
Thanks
cheers
sbahri
View 2 Replies
View Related
May 30, 2008
Hi,
As there were 1 lakh + records were available in a table of sql server 2005 database.
There are only 4 users who can access the production server / database.
Between such time we came to know that data in that table deleted. As only one record exists out of 1lakh + records.
Now, I would like to know/find how the data was deleted or who fired the delete query and keeping only one record inside it.
Is there any log maintained whenever a user fires statements/queries in query analyser of sql server 2005.
Pls help as this was happened first time but it can be continued.
Regards,
Srinivas Alwala
View 1 Replies
View Related
