I'm having trouble using VS2005 to remotely debug stored procedures in SQL Server 2005.
After setting a breakpoint, when I select "Step into Stored Procedure", I am NOT prompted to enter parameter values. I'm taken straight to the debug window, which is titled "Running" but nothing is happening. The breakpoint icon changes to a translucent icon with a yellow exclamation mark. The mouseover tooltip says:
"The breakpoint will not currently be hit. Unable to bind SQL breakpoint at this time. Object containing the breakpoint not loaded".
If I choose "Exceute" instead of "Step into Stored Procedure", I'm prompted to enter parameter values and everything works as expected.
I cannot seem to get this to option to come up without having the full blown studio installed.
Is there something else that needs to be configured on the database before having this option enabled? I have enable clr (which is semi-unrelated to good ol' fashion stored procedure debugging) in the surface area configuration manager, but still no luck.
I am using SQL Server 2005 Standard Edition. I can get this feature working w/ no prob when I have the full blown Visual Studio Professional version installed, but not with just SQL Server - Futher insight would be helpful.
I am running a stored procedure as a job step and in the stored procedure I use return to pass one of several possible values when there is an error in processing (not an system error) so that the job step will fail. However, even when I return a non-zero value using return the job step completes as successful. What should I be doing so that the job step picks up the non-zero value and then indicates the step failed?
When I start my stored procedure from Query Analyzer it ends in 1 h. I have created a job consisting of 1 step - the same procedure. If I start the job from Enterprise Manager it ends after some 10 h. What can I do to get the same performance?
Can anybody explain how to do debug a stored procedure from SQL Query Analyser.
When i tried opening Query Analyser and pressing F8 i am able to see Object Browser on left side, i selected the d/b and expanded it then i selected a stored procdure by right click of mouse. I selected "Debug".
It shows me alert msg "SQL Debugging may not work properly if you log on as 'Local System Account' while SQl server is configured to run as a service. You can open Event Viewer to see details." DO U WISH TO CONTINUE- I selected "YES"
I am able to see 3 split windows on right side and GO, Toggle, Untoggle are enabled BUT Step Into, Step Over, Step Out...Stop debugging are disabled at menu bar.
The 1st right split window shows the proc code, 2nd split window shows Local-Global-Callstack none of them shows any values(blank), 3rd split window shows records(result) and @RETURN_VALUE = 0 message
I had Toggled at each and every line of the procedure in 1st split window still it doesnt respond anything.
What might be the problem, how to solve it do i need to give any permissions.
i tried logging from wind Authentication and also from Sql Authentication (sa/sa), still same problem occurs. By the way i am using SQL Server 2000.
I couldn't debug SQL Server by "Step into Stored Procedure" on Server Explorer of VS2008 (or VS2005) to SQL 2005 Developer on remote Windows Server 2003 machine, it allway issue exception "Unable to start T-SQL Debugging. Could not attach to SQL Server process on 'Server'. Click Help for more information"
1) The environment: The Client: Windows XP SP2 (WORKGROUP) Visual Studio 2008 (or VS2005)
The SQL Server Machine: Windows 2003 Server Sp1 (DOMAIN) SQL Server 2005 Developer
2) User account and Permission login: I create the same user account for both Client and Domain Server with the same password, i also add that user to "Administrators" group in both machine.
At the SQL Server on Server machine, i added that account to ServerSecurityLogin with 'sysadmin' role already
3) Connection and authentication: I used "Windows Authentication" for my connection to SQL server, and i checked sure my account of the connection by SQL command
SELECT SYSTEM_USER, IS_SRVROLEMEMBER ('sysadmin')
4) Firewall: I checked firewall like MSDN helping (i also tried to test by turn off firewall in both machine)
5) Visual Studio Remote Debugger: I read "How to: Enable SQL Server 2005 Debugging" on MSDN with comment "The SQL Server can run on the same machine as the application or on a remote machine. If you are debugging T-SQL code only, then no remote setup is required." so i didn't config Visual Studio Remote Debugger any thing.
Note: If i "Step Into Store Procedure" at Server locally, it works okey, so on at my PC client locally. But if i move debugging from my client to my Server, it occur error "Unable to start T-SQL Debugging. Could not attach to SQL Server process on 'Server'. Click Help for more information"???
If i execute store procedure on Server Explore, it works okey!
I have just had to reinstall Visual Studio on my laptop after months of merry developing.
To debug the sprocs I have written I made use of Visual Studio's "Step into Procedure" facility that lets you run your code line by line. Its a great feature.
With the new installation in place if I right click on a sproc of interest I no longer get "Step into Procedure" on the pop-up menu.
I remember we had a bit of trouble making it appear when we installed Visual Studio last year. My boss was around that time and fixed it for me. Today he's not around.
Anyone know how to make "Step into Procedure" appear? Is there some option in Tools or something?
I want to convert .rdl to .rdc need full steps.Actually i created .rdl report using sp sucessfully.Now i want to convert it to rdlc while doing it iam getting some authentication error and some thing else.I created rdl in 2008 and i want to change it to rdlc 2010.
I have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
I am working on SQL-Server 2000 (developer edition) with SP3 on Win 2000 and Clients are Win98/Win XP.
I am not able to 'Step Into' my SQL Procedure code in Debug mode, executed from Query Analyzer from a client machine. As soon as I select the 'Execute' button after inserting all the parameters value, the whole procedure gets executed. But I'm able to do the same (i.e 'step into') from the Server itself.
Do I need any additional configuration settings in the client machine ??
I shall be greatful if anyone can help me to solve the above problem.
I hope the answer is as simple as the question -- but after reading all the documentation I could find (understand?) and a lot of posts here, I'm no closer to achieving the goal.
I have a Visual C# app, DAYTRACKER, developed in VS2005. It uses a database with several tables constructed using SQL Server 2005 Developer Edition.
I want to deploy the app plus the database plus SQL Express to another machine, to be used by a single user (the administrator) with no need for network connectivity of any kind.
What I have so far is: 1. The application is successfully deployed from a CD-ROM, having used the Publish process within VS2005, and opens on the new machine -- without database connectivity, however. 2. SQL Express is successfully deployed (it deployed as a 'prerequisite' when I went through the Publish process in VS2005) 3. I manually copied the database's .mdf and .mdl files, using SQL Server Managers 'Copy Database' function, then transferred the copies to the new machine into the ..MSSQL.1MSSQLdata folder (where they appear along with the master.mdg, mastlog.ldf etc files)
Now, the DAYTRACKER application's DAYTRACKERConnectionString under 'Settings' in the VS2005 studio reads 'Data Source=DELL3;Initial Catalog=DayTracker;Integrated Security=True' (which are the appropriate parameters for the machine, DELL3, on which I wrote the program.)
The problem, of course, is that SQL Express on the new machine doesn't connect the application to the database. When I go to the 'SQL Server Configuration Manager' and go to the 'SQL Server 2005 Services' and double-click on the 'SQL Server (SQLEXPRESS)' icon (the service is running) and the user is logged on using 'Local System Account'. Under the 'Service' tab the Host Name is 'MUSIC' (which is the name of the new machine I've installed the app onto -- which of course is not the name - DELL3 - that the app's connection string is expecting). Under the 'Advanced' tab, I've tried correcting the name of the Startup Parameters default .mdf and .mdl entries to ..DayTracker.mdf and ..DayTracker_log.mdl, but the server won't start up after I make the changes.
What I'm hoping for: a step-by-step way of doing this type of deployment, preferable getting it all onto one CD-ROM, and installing it on the new machine so that it all works seamlessly from the start, not requiring any 'tweaking' of the SQLServer Express settings by the end-user.
But I'll take pretty much anything that fixes the specific db connectivity problem I've described.
I am able to step into a sql stored proc through the VS IDE. I am able to look at some values in the quick watch window. But I need to examine the results of certain queries. Like a select statement that gets placed into a temp table. How can I view the results of the query? If their is not an elegant way of doing this in the debugger, then should I put sql statements in the stored proc, that would display the results of the query?(Assuming I would remove them after debugging) If the answer is yes, then maybe someone can give me some ideas. Like how would I print to the screen the results of the query, or be able to view the results of the query? My sql skills are a bit weak, so I would appreciate any help I can get. Ralph Goodwin
I am trying to debug sql2000 sp from managed code app with VS.Net 2003 archetect Ed.. It did not stop at the break point within the sql sp. I did granted execute permission for sp_sdidebug. Do I need to attach any process?
Is there anything left off by the article? I referenced msdn article option 2: http://support.microsoft.com/default.aspx?kbid=316549
Hi, I have to transport a big database table and can't read it at once with "select * from table" because the table is bigger than my system memory. Is there a way to read the table step by step? I thought it was possible with ADO and his serverside cursors but I don't now how. I need an "universal" solution that works on SQL Server 2000/2005, MySQL and Oracle.
Connecting to a networked SQL Server Box from my local machine
Open Query Analyzer from Start menu, logging in using sa account.
from the object browser i select my stored procedure (WEA_InsertClaim) - right click and select Debug.
i am prompted to enter the parameter values, which i do, auto rollback checkbox is checked - click Execute.
T-SQL Debugger opens and runs through the stored procedure.
but only buttons enabled are the "Go", "Toggle Breakpoint", "Clear All Breakpoints"
so i can set breakpoints etc. but when i select Go it will not stop at the breakpoints it just runs through the stored procedure from start to finish. giving the correct return code as its output
is there something i need to enable in order to make it stop at breakpoints??
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Is there a good step by step guide to setting up an indirect configuration? I've followed the steps in Kirk Haselden's 'Keep your packages in the dark' article 3 or 4 times this afternoon and nothing seems to work. I cannot even get the XML configuration file to work by accessing it directly. I'm using the wizard to create the file.
Just wondering if there was something else out there....
I posted this on the sql server security forums too. Here is the error that i get when i change the type of the step to ssis
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) Additional information: An exception occured while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
Dear Experts, please guide me for replcation..... i'm using sql server 2005 server tools developer edition. my OS is professional 2000. and i've sqlserver 2000 client tools also
i've two databases in my machine. publisher is in different instance, and the transactions might be maximum 50 per day. my aim is when ever developer enters the data into the main database, automatically it should be updated on the my two databases also. i mean the server is sysA and the database is srtp. my machine is sys20 and the databases are srtp1, srtp2. how should i make sysA as publisher? i've right click on the server databases, but it is showing newsubscriptions option only.
Vinod Even you learn 1%, Learn it with 100% confidence.
Intel D975XBX €“ 930 €“ 2GB ram €“ HD 300GB - MatroxVD Windows XP Sp2 + updates Visual Studio 2005 Professional edition SQL Sever 2005 Standard Edition
20070203 Install Practice Files at D:Program FilesMicrosoft PressVisual C Sharp Step by Step.
Configuring SQL Sever Express Edition Hostname - xxxxxxxxx..
At sqlcmd €“s xxxxx...SQLExpress €“E got - Pipes error.
Open Microsoft SQL Sever 2005 - Configuration Tools €“ SQL Configuration Manager €“ select Protcols for SQLEXPRESS €“ select Named Pipes €“ enable €“ close.
At sqlcmd €“s xxxxx..SQLExpress €“E get Sqlcmd: €˜ €˜ : Unknown Option. Enter €˜ -? €˜ for help.
Chdir C:Documents and SettingsAll UsersStart MenuProgramsMicrosoft Server 2005 Sqlcmd €“s xxxxxx..SqlExpress €“E Hresult 0x2, Lvel 16, State 1 Named Pipes Provider: Couldnot open a connection to SQL Server [2]. Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.. Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
How do I fix this?
Need to be able to to use the Northwind Traders data base
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
