I have a mere 100MB db with a 4GB transaction log. I want to truncate the log as I understand that truncating it will shrink the log by removing the transactions that have already taken place. However, the option to do a transaction backup is greyed out. I suspect this is from the db being in transactional replication with another server; however, I don't know for sure.
Are there any other ways that I can shrink the transaction log? I would like to do shrink it without taking the db offline either.
We have a SQL 6.5 Server with several DB's on it. Specially there's a critical DB on two separate devices for the Data and Transaction Log. The Data Device is 700MB and the Transaction Log started 210MB. Yet, the truncate function of the Log Device is not freeing space on it. We have been forced to expand the transaction device up to 860MB!!!! which is an outrageous size for it. We have tried the DBCC CHECKTABLE(syslogs)followed by DUMP TRANSACTION <<db_name>> WITH NO_LOG and then once again the DBCC CHECKTABLE(syslogs). We even tried to create a new DB only with the dat file, but this also didn't work. Our Server Disks are almost full, and we can't grow the device no more.
I need to truncate the transaction log, however, to do a backup on it we need 15GB of space free on the server which we don't have. How do we just force it to truncate it? I know the actual database is backedup and is OK...
SQL Server 6.5 Hi! We have trans.log 200MB in total and 71 MB free space. I run DBCC OPENTRAN and it shows no active transactions exist. I run DuMP TRANSACTION .... WITH TRUNCATE_ONLY and it doesny clean log also. What to do to get space back?
A number of procedures where run that filled the transaction log. Can I truncate the log during regular working hours or should I take the database down to single user mode and truncate?
We do full backup every day and recovery model is Full, but we never done transaction log backup, so the transaction log files keep growing. What should I do? I think I should set recovery model to Simple, and actually we do DBCC Shrinkdatabase after full backup every day, but the transaction log file is still around 15GB.
Is it possible to TRUNCATE a table and BCP data into the same table in one TRANSACTION? My problem is that I want to refresh(delete and via BCP append new data) a table without disturbing running applications. Can I run BCP from a SQL-script or a stored procedure?
Within SQL Ent Manager - I am unable to truncate the tran log using the shrink file option window (although I can shrink the database file) - nor can can I truncate the log using command line sql in a query analzer window (dump tran < > with truncate only)....
I use SSME to do a full backup of both the database & transaction log, selected "Truncate ..." in the options for the log backup. The log doesn't truncate.
I have looked at the reasons logs don't truncate in Books Online & can not find any that apply. There are no open transactions & in sys.databases log_reuse_wait is 0.
My website is in asp and sql2000. My problem is the ISP gave access to database through query analyser. some days the transaction log is growing too high. so i want to clear it. i call up them and clear it. My question is can truncate the log file through query analyser ? I had limited access to database.
Is it possible to truncate Transaction Log and Shrink DATABASE while the database is being used by users or the database becomes unuvailable during this operations?
Hello all, I have a very simple script which I use to truncate and reclaim space on all the transaction logs in a SQL Server 2005 database. However, I have some Sharepoint db names I can't change that have dashes ('-') in the names, e.g., SharePoint_AdminContent_dc27334f-fb2d-4453-9764-5d8b730fb9e1. The script won't back up those databases because it has a problem with the dashes in the names. Does anyone have any thoughts on how I could modify the script to get it to work? Here is the script:
ALTER PROCEDURE [dbo].[SP_GlobalTruncate_transaction_logs]
AS
Set quoted_identifier off
DECLARE @dataname varchar(300)
DECLARE @dataname_header varchar(75)
DECLARE datanames_cursor CURSOR FOR SELECT name FROM sysdatabases
WHERE name not in ('master', 'pubs', 'tempdb', 'model', 'northwind')
PRINT 'Free space removed and transaction log truncated for each user database' GO
And here is the error I get: Database SHAREPOINT_ADMINCONTENT_DC27334F-FB2D-4453-9764-5D8B730FB9E1
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '-'.
Msg 319, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon.
Database is in simple recovery mode, and published with transaction replication push subscription, just one subscriber but the database is huge. I don't want to overwrite the schema at the subscriber either.
I had to run an alter database command on a published database, it created so many logs that an extra drive had to be added along with an extra log file to accommodate all the logs.
The problem I have is I'd like to know clear the file of logs so I can drop the temporary log file, and give the drive back, but I cannot.
I have tried dbcc shrinkfile with the emptyfile option but it never clears, I have also tried it with notruncate and truncateonly options (mainly out of desperation).
I do not need to worry about point in time restore as a full backup is taken before and after the operation. After which the database will be put back into Full recovery mode.
I have looked at log_reuse_wait_desc and the file says 'Replication', so I am now thinking the file cannot empty because replication is keeping one of the VLFs active. I tried dropping and recreating the subscription hoping it might free something up and I could get somewhere, but it made no difference.
Do I have to remove replication completely to get round this? Surely not.
I have also tried putting the database back into full recovery mode, doing a full DB backup, and a transaction log backup, but its made no difference, which is also what makes me think a portion of the log is still active because of replication, and perhaps the transactions have not gone through to the subscriber, which raises another question, why not?
I have not tried restarting SQL server, as I'd like to know a way out of this without having to do that, plus I do not think it would make any difference anyway.
I created transactional replication on a database and setup pull subscriptions on each subscriber to run at a scheduled time once a day. The scheduled start time on each subscriber can differ. The transaction log on the publishing database will eventually consume all possible disk space. Is it possible (and safe) to shrink or truncate the transaction log file for the publishing database before all the subscribers completed running its daily pull subscription? If not, how can I manage disk space for the transaction log on the publishing database and ensure all transaction are replicated to the subscriber?
I have one database configured with the Recovery Model "Simple".
I am getting alot of full transaction log messages... is this supposed to happen?
Another question is:
Imagine i am in a middle of a big select into statement... and in another query i run the backup truncate log... am i going to loose information on the other batch ("select into?")??
We are using SQL Server 2005 (SP1). I have created a maintenance plan that backs up up the datebase every night. The problem is that the transaction log is continuing to grow. I have been told that a full backup will automatically truncate and shrink the transaction log. However, this is not happening. How can I truncate and shrink the transaction log after a full backup as part of our maintenance plan. Thank you.
With a database size of almost 2 GB, I run the 'truncate table eventlog command' which completes successfully, but the database size only decreases by about 10 MB so stays too large - indeed the number of rows in the eventlog table is minimal, but the otehr tables in this database don't show such an amount of tables large enough to cause the size issue either. What could be the reason and how can I reduce it (possibly truncating another table but then which one, how could I determine which is too large and needs truncating?).
Please forgive the elementary nature of my question, but could someone please explain the differences between these two database backup types:
1. Log backup 2. Log backup no truncate
From what I understand and have read, the "no truncate" backup method keeps the entire transaction log indefinitely. Using the truncation method, the transaction log is either 1) compressed or 2) cleaned up so that any completed transactions are removed from the log. Which one of these is true?
And, for the big question: is it better to run a backup of the transaction log with truncation or not? Our current backup scheme is similar to the following:
Full backup every 24 hours transaction log backup every hour with no truncation
Should we insert a truncation backup somewhere in here? What is the danger of removing (or compressing) parts of the transaction log? Will this affect the restore process?
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON Begin distributed Tran update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 and DONE = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
I am getting this error :Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query: WITH MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]) SELECT NON EMPTY {SPEND} ON 0 ,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1 FROM [CUBE]
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
